Add a helper function to document why block jobs sometimes run in the
QEMU main loop and to avoid code duplication in a following patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1466096189-6477-5-git-send-email-stefanha@redhat.com
Block jobs are coroutines that usually perform I/O but sometimes also
sleep or yield. Currently only sleeping or yielded block jobs can be
paused. This means jobs that do not sleep or yield (using
block_job_yield()) are unaffected by block_job_pause().
Add block_job_pause_point() so that block jobs can mark quiescent points
that are suitable for pausing. This solves the problem that it can take
a block job a long time to pause if it is performing a long series of
I/O operations.
Transitioning to paused state involves a .pause()/.resume() callback.
These callbacks are used to ensure that I/O and event loop activity has
ceased while the job is at a pause point.
Note that this patch introduces a stricter pause state than previously.
The job->busy flag was incorrectly documented as a quiescent state
without I/O pending. This is violated by any job that has I/O pending
across sleep or block_job_yield(), like the mirror block job.
[Add missing block_job_should_pause() check to avoid deadlock after
job->driver->pause() in block_job_pause_point().
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1466096189-6477-4-git-send-email-stefanha@redhat.com
The block_job_is_paused() function name is not great because callers
only use it to determine whether pausing has been requested. Rename it
to highlight those semantics and remove it from the public header file
as there are no external callers.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1466096189-6477-3-git-send-email-stefanha@redhat.com
The QMP block-job-resume command and cancellation may want to reset the
job's iostatus. The next patches add a user who does not want to reset
iostatus so move it up to block_job_enter() callers.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1466096189-6477-2-git-send-email-stefanha@redhat.com
If we pause a block job and drain its BlockDriverState we want that
the job remains inactive until we call block_job_resume() again.
However if we pause the job while it is sleeping then it will resume
when the sleep timer fires.
This patch prevents that from happening by checking if the job has
been paused after it comes back from sleeping.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 3d9011151512326b890d22bdab3530244ef349d7.1464346103.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There is a single remaining user in qemu-img, and another one in a test
case, both of which can be trivially converted to using BlockJob.blk
instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This adds a new BlockBackend field to the BlockJob struct, which
coexists with the BlockDriverState while converting the individual jobs.
When creating a block job, a new BlockBackend is created on top of the
given BlockDriverState, and it is destroyed when the BlockJob ends. The
reference to the BDS is now held by the BlockBackend instead of calling
bdrv_ref/unref manually.
We have to be careful when we use bdrv_replace_in_backing_chain() in
block jobs because this changes the BDS that job->blk points to. At the
moment block jobs are too tightly coupled with their BDS, so that moving
a job to another BDS isn't easily possible; therefore, we need to just
manually undo this change afterwards.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
So far, bdrv_close_all() first removed all root BlockDriverStates of
BlockBackends and monitor owned BDSes, and then assumed that the
remaining BDSes must be related to jobs and cancelled these jobs.
This order doesn't work that well any more when block jobs use
BlockBackends internally because then they will lose their BDS before
being cancelled.
This patch changes bdrv_close_all() to first cancel all jobs and then
remove all root BDSes from the remaining BBs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The current way to obtain the list of existing block jobs is to
iterate over all root nodes and check which ones own a job.
Since we want to be able to support block jobs in other nodes as well,
this patch keeps a list of jobs that is updated every time one is
created or destroyed.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
When block job errors were introduced, we assigned the iostatus of the
target BDS "just in case". The field has never been accessible for the
user because the target isn't listed in query-block.
Before we can allow the user to have a second BlockBackend on the
target, we need to clean this up. If anything, we would want to set the
iostatus for the internal BB of the job (which we can always do later),
but certainly not for a separate BB which the job doesn't even use.
As a nice side effect, this gets us rid of another bs->blk use.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
With a mirror job running on a virtio-blk dataplane disk, sending "q" to
HMP will cause a dead loop in block_job_finish_sync.
This is because the aio_poll() only processes the AIO context of bs
which has no more work to do, while the main loop BH that is scheduled
for setting the job->completed flag is never processed.
Fix this by adding a flag in BlockJob structure, to track which context
to poll for the block job to make progress. Its value is set to true
when block_job_coroutine_complete() is called, and is checked in
block_job_finish_sync to determine which context to poll.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1454379144-29807-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
Unused since 94db6d2d3.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Sometimes block jobs must execute as a transaction group. Finishing
jobs wait until all other jobs are ready to complete successfully.
Failure or cancellation of one job cancels the other jobs in the group.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1446765200-3054-10-git-send-email-jsnow@redhat.com
[Rewrite the implementation which is now contained in block_job_completed.
--Fam]
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With job->completed and job->ret to replace BlockFinishData.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1446765200-3054-9-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
They are set when block_job_completed is called.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1446765200-3054-8-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add reference count to block job, meanwhile move the ownership of the
reference to job->bs from the caller (which is released in two
completion callbacks) to the block job itself. It is necessary for
block_job_complete_sync to work, because block job shouldn't live longer
than its bs, as asserted in bdrv_delete.
Now block_job_complete_sync can be simplified.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1446765200-3054-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These options are only relevant for the user of a whole BDS tree (like a
guest device or a block job) and should thus be moved into the
BlockBackend.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The coroutine files are currently referenced by the block-obj-y
variable. The coroutine functionality though is already used by
more than just the block code. eg migration code uses coroutine
yield. In the future the I/O channel code will also use the
coroutine yield functionality. Since the coroutine code is nicely
self-contained it can be easily built as part of the libqemuutil.a
library, making it widely available.
The headers are also moved into include/qemu, instead of the
include/block directory, since they are now part of the util
codebase, and the impl was never in the block/ directory
either.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some block jobs change the block device graph on completion. This means
that the device that owns the job and originally was addressed with its
device name may no longer be what the corresponding BlockBackend points
to.
Previously, the effects of bdrv_swap() ensured that the job was (at
least partially) transferred to the target image. Events that contain
the device name could still use bdrv_get_device_name(job->bs) and get
the same result.
After removing bdrv_swap(), this won't work any more. Instead, save the
device name at job creation and use that copy for QMP events and
anything else identifying the job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
There is job resource leak in function mirror_start_job,
although bdrv_create_dirty_bitmap is unlikely failed.
Add block_job_release for each release when needed.
Signed-off-by: Ting Wang <kathy.wangting@huawei.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1435311455-56048-1-git-send-email-kathy.wangting@huawei.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch changes block_job_pause to increase the pause counter and
block_job_resume to decrease it.
The counter will allow calling block_job_pause/block_job_resume
unconditionally on a job when we need to suspend the IO temporarily.
From now on, each block_job_resume must be paired with a block_job_pause
to keep the counter balanced.
The user pause from QMP or HMP will only trigger block_job_pause once
until it's resumed, this is achieved by adding a user_paused flag in
BlockJob.
One occurrence of block_job_resume in mirror_complete is replaced with
block_job_enter which does what is necessary.
In block_job_cancel, the cancel flag is good enough to instruct
coroutines to quit loop, so use block_job_enter to replace the unpaired
block_job_resume.
Upon block job IO error, user is notified about the entering to the
pause state, so this pause belongs to user pause, set the flag
accordingly and expect a matching QMP resume.
[Extended doc comments as suggested by Paolo Bonzini
<pbonzini@redhat.com>.
--Stefan]
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1428069921-2957-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that blockjobs use AioContext they are safe for use with dataplane.
Unblock them!
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-12-git-send-email-stefanha@redhat.com
Block jobs will run in the BlockDriverState's AioContext, which may not
always be the QEMU main loop.
There are some block layer APIs that are either not thread-safe or risk
lock ordering problems. This includes bdrv_unref(), bdrv_close(), and
anything that calls bdrv_drain_all().
The block_job_defer_to_main_loop() API allows a block job to schedule a
function to run in the main loop with the BlockDriverState AioContext
held.
This function will be used to perform cleanup and backing chain
manipulations in block jobs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-6-git-send-email-stefanha@redhat.com
When a block job signals readiness, this is currently reported only
through QMP. If qemu wants to use block jobs for internal tasks, there
needs to be another way to correctly detect when a block job may be
completed.
For this reason, introduce a bool "ready" which is set when the block
job may be completed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414159063-25977-6-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement block_job_complete_sync() by doing the exact same thing as
block_job_cancel_sync() does, only with calling block_job_complete()
instead of block_job_cancel().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-5-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
I'll use it with block backends shortly, and the name is going to fit
badly there. It's a block layer thing anyway, not just a block driver
thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
device_name[] can become non-empty only in bdrv_new_root() and
bdrv_move_feature_fields(). The latter is used only to undo damage
done by bdrv_swap(). The former is called only by blk_new_with_bs().
Therefore, when a BlockDriverState's device_name[] is non-empty, then
it's been created with a BlockBackend, and vice versa. Furthermore,
blk_new_with_bs() keeps the two names equal.
Therefore, device_name[] is redundant. Eliminate it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block_job_sleep_ns is the only user. Since we are moving towards
AioContext aware code, it's better to use the explicit version and drop
the old one.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 5a2d2cb screwed up the the value of members device and action,
breaking tests/qemu-iotests/041.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit bcada37 dropped the (up to now undocumented) members type, len,
offset, speed, breaking tests/qemu-iotests/040 and 041.
Restore and document them. This fixes 040, and partially fixes 041.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will unset busy flag and put coroutine to sleep, can be used to
wait for QMP complete/cancel.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since BLOCK_JOB_COMPLETED, BLOCK_JOB_CANCELLED, BLOCK_JOB_READY are
related, convert them in one patch. The block_job_event_* functions
are used to keep encapsulation of BlockJob structure.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.
At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
It makes no sense to check for "any" blocker on bs, we are here only
because of the mechanical conversion from in_use to op_blockers. Remove
it now, and let the callers check specific operation types. Backup and
mirror already have it, add checker to stream and commit.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This drops BlockDriverState.in_use with op_blockers:
- Call bdrv_op_block_all in place of bdrv_set_in_use(bs, 1).
- Call bdrv_op_unblock_all in place of bdrv_set_in_use(bs, 0).
- Check bdrv_op_is_blocked() in place of bdrv_in_use(bs).
The specific types are used, e.g. in place of starting block backup,
bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP, ...).
There is one exception in block_job_create, where
bdrv_op_blocker_is_empty() is used, because we don't know the operation
type here. This doesn't matter because in a few commits away we will drop
the check and move it to callers that _do_ know the type.
- Check bdrv_op_blocker_is_empty() in place of assert(!bs->in_use).
Note: there is only bdrv_op_block_all and bdrv_op_unblock_all callers at
this moment. So although the checks are specific to op types, this
changes can still be seen as identical logic with previously with
in_use. The difference is error message are improved because of blocker
error info.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The former is only used twice, the latter is used over 30 times, and
has a nicer error message.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Switch the string to enum type BlockJobType in BlockJobDriver.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We will use BlockJobType as the enum type name of block jobs in QAPI,
rename current BlockJobType to BlockJobDriver, which will eventually
become a set of operations, similar to block drivers.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block jobs used drive_get_ref(drive_get_by_blockdev(bs)) to avoid BDS
being deleted. Now we have BDS reference count, and block jobs don't
care about dinfo, so replace them to get cleaner code. It is also the
safe way when BDS has no drive info.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert block_job_sleep_ns and co_sleep_ns to use the new timer
API.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Even for jobs that need to be manually completed, management may want
to take care itself of the completion, not requiring the user to issue
a command to terminate the job. In this case we want to avoid that
they poll us continuously, waiting for completion to become available.
Thus, add a new event that signals the phase switch and the availability
of the block-job-complete command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While streaming can be dropped as soon as it progressed through the whole
image, mirroring needs to be completed manually for two reasons: 1) so that
management knows exactly when the VM switches to the target; 2) because
for other use cases such as replication, we may leave the operation running
for the whole life of the virtual machine.
Add a new block job command that manually completes background operations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following behaviors are possible:
'report': The behavior is the same as in 1.1. An I/O error,
respectively during a read or a write, will complete the job immediately
with an error code.
'ignore': An I/O error, respectively during a read or a write, will be
ignored. For streaming, the job will complete with an error and the
backing file will be left in place. For mirroring, the sector will be
marked again as dirty and re-examined later.
'stop': The job will be paused and the job iostatus will be set to
failed or nospace, while the VM will keep running. This can only be
specified if the block device has rerror=stop and werror=stop or enospc.
'enospc': Behaves as 'stop' for ENOSPC errors, 'report' for others.
In all cases, even for 'report', the I/O error is reported as a QMP
event BLOCK_JOB_ERROR, with the same arguments as BLOCK_IO_ERROR.
It is possible that while stopping the VM a BLOCK_IO_ERROR event will be
reported and will clobber the event from BLOCK_JOB_ERROR, or vice versa.
This is not really avoidable since stopping the VM completes all pending
I/O requests. In fact, it is already possible now that a series of
BLOCK_IO_ERROR events are reported with rerror=stop, because vm_stop
calls bdrv_drain_all and this can generate further errors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Job pausing reuses the existing support for cancellable sleeps. A pause
happens at the next sleeping point and lasts until the coroutine is
re-entered explicitly. Cancellation was already doing a forced resume,
so implement it explicitly in terms of resume.
Paused jobs cannot be canceled without first resuming them. This ensures
that I/O errors are never missed by management.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Because pausing a job is asynchronous, we need to know whether it has
completed. This is described by the "busy" field of BlockJob; copy it
to BlockJobInfo.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Extract it out of the implementation of info block-jobs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
