Add a default_net variable which specified whenever a default network
should be created. It is cleared in case any -net option is specified
and it is also added to the new -nodefaults switch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a NetClientInfo pointer to VLANClientState and use that
for the typecode and function pointers.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
... and VLANClientState::opaque and qemu_find_vlan_client().
All of these are now unused
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Common state for all NICs.
The opaque member will replace the opaque member in VLANClientState
since only NICs need it.
The conf member will allow us to iterate over NICs, access the MAC
addr for the NIC and send a packet from each NIC in qemu_announce_self().
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A replacement for qemu_new_vlan_client(), using NetClientInfo to
replace most arguments.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is probably a little drastic, but the includes in this file are
now totally out of control when compared with what includes are
actually needed.
This may break the build on e.g. *BSD, but it will be easily fixed by
re-instating an include.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a receiver returns zero, that means its queue is full and it will
notify us when room is available using qemu_flush_queued_packets().
Take note of that and disable that receiver until it flushes its queue.
This is a first step towards allowing can_receive() handlers to return
true even if no buffer space is available.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Okay, this makes the tap options available on AIX even though there's
no support, but if we want to do it right we should have not compile
the tap code at all on AIX using e.g. CONFIG_TAP.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Enable UFO on the host tap device if supported and allow setting UFO
on virtio-net in the guest.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This API allows virtio-net to enable various offload features on a
tap interface - e.g. to tell the host kernel it can pass up partial
checksums to userspace.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
tap_receive_raw() always prepends a vnet header if IFF_VNET_HDR is
enabled.
tap_receive() only prepends when the a header is required but the NIC
doesn't supply one.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Trivial patch to allow supplying a receive_raw function.
A future cleanup should combine this function pointer parameters into a
table.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the case where a NIC and backend agree on a packet header format,
this API allows injecting packets which lack the agreed upon header.
We need this for sending our gratuitous ARP.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows for the addition of a raw flag, and leaves the way open
for other flags too.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These lamely named functions allow virtio-net to query whether
IFF_VNET_HDR is enabled on a tap interface and inform the tap code
that virtio-net will supply packets with a vnet header.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is so as to allow APIs which operate on specific client types
without having to add a function table entry which is only implemented
by a single client type.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows people to disable the IFF_VNET_HDR flag, e.g. for debugging
purposes or if they know they may migrate the guest to a machine without
IFF_VNET_HDR support.
It also allows making the lack of IFF_VNET_HDR support an error
condition, e.g. in the case where a guest is being migrated from a host
which does support it.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Re-factor things so that there is only one call site for
net_tap_fd_init().
Two concerns about the QemuOpts usage here - firstly, we set the script
arguments to their default value and, secondly, we set the ifname value
to the name allocated by the kernel if none is supplied. Are we okay
with such things ending up in writeconfig output?
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For now, we just add an empty header before writing and strip the header
after reading.
We really only want IFF_VNET_HDR when virtio_net is using it, but it
would significantly complicate matters to try and do that. There should
be little or no performance impact with always adding headers.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In future we will want to prepend a virtio_net header if the NIC didn't
supply one but IFF_VNET_HDR is enabled on the interface. This is most
easily achived by using writev() in all cases.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Making features dependent on the availability of newer versions if_tun.h
is going to get seriously clumsy, so let's just import the definitions
we need. It's only a small handful.
If and when we're comfortable depending on 2.6.30 headers, we can remove
this again.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add new type for mac addresses.
Add function which sets the qemu default mac address if it finds the mac
address uninitialized (i.e. all zeros).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For NICs, net_init_client() returns the index into the NICInfo table.
qemu_opts_foreach() interprets non-zero as an error return an stops
iterating over the options.
So, if you have more than one '-net nic' on the command line, subsequent
'-net' options do not get processed.
Fix this by making net_client_init() only return non-zero if
net_init_client() returns an error.
Reported-by: Peter Lieven <pl@dlh.net>
Patchworks-ID: 35736
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that we have re-factored the packet queue code, we can re-use
it for peer-to-peer also.
Patchworks-ID: 35520
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The packet queue code is fairly standalone, has some complex details and
easily reusable. It makes sense to split it out on its own. This patch
doesn't contain any functional changes.
Patchworks-ID: 35511
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce a 'peer' member to VLANClientState as an alternative
to a vlan. The idea being that packets are transfered directly
from peer clients rather than going through a vlan.
Patchworks-ID: 35516
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allows them to be cleaned up at shutdown.
This is pretty lame, but will eventually go away as we make vlans
the special case.
Patchworks-ID: 35518
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Same as for -net except for:
- only tap, user, vde and socket types are supported
- the vlan parameter is not allowed
- the name parameter is not allowed but the id parameter is
required
Patchworks-ID: 35517
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow net clients to be created which are not connected to any vlan.
This is needed by Gerd in order to allow adding -device nic, where
the absence of a vlan parameter will not imply vlan=0. Also needed
to allow adding a -netdevice option which doesn't connect the backend
to a vlan.
Patchworks-ID: 35513
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Just use the name field instead since we now use the id paramater as
the name, if supplied. Only implication with this change is that if
id is not supplied, the value of the name paramater is used as an
id.
Patchworks-ID: 35512
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use id= in the same was as the current name= parameter; if both are
specified, id= is used.
Patchworks-ID: 35514
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Needed for e.g. looking up a file descriptor name using
monitor_get_fd() in net_init_tap()
Patchworks-ID: 35509
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This moves the code that depens on slirp under CONFIG_SLIRP again.
Patchworks-ID: 35372
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that net_client_init() has no users, kill it off and rename
net_client_init_from_opts().
There is no further need for the old code in net_client_parse() either.
We use qemu_opts_parse() 'firstname' facitity for that. Instead, move
the special handling of the 'vmchannel' type there.
Simplify the vl.c code into merely call net_client_parse() for each
-net command line option and then calling net_init_clients() later
to iterate over the options and create the clients.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We need net_client_init_from_opts() exported for this
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
