Coldfire defines an "Unsupported instruction" exception if execution
of a valid instruction is attempted but the required hardware is not
present in the processor.
We use it with instructions that are in fact undefined or illegal,
and the exception expected in this case by the kernel is the
illegal exception, so this patch fixes that.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181030165554.5761-1-laurent@vivier.eu>
Stack pointer alignment code incorrectly adds stack_size to sp instead
of subtracting it. It also does not take flat_argvp_envp_on_stack() into
account when calculating stack_size. This results in initial stack
pointer misalignment with certain set of command line arguments and
environment variables and correct alignment for the same binary with a
different set of arguments. This misalignment causes failures in the
following tests in the testsuite of gcc built for xtensa uclinux:
gcc.dg/torture/vshuf-v64qi.c
gcc.dg/torture/vshuf-v8sf.c
gcc.dg/torture/vshuf-v8si.c
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
-----BEGIN PGP SIGNATURE-----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=sHPv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging
QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
# gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request:
milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report
ppc: move at24c to its own CONFIG_ symbol
hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro
hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro
tests/bios-tables-test: Remove an useless cast
xen: Use the PCI_DEVICE macro
qobject: Catch another straggler for use of qdict_put_str()
configure: Support pkg-config for zlib
tests: Fix typos in comments and help message (found by codespell)
cpu.h: fix a typo in comment
linux-user: fix comment s/atomic_write/atomic_set/
qemu-iotests: make 218 executable
scripts/qemu.py: remove trailing quotes on docstring
scripts/decodetree.py: remove unused imports
docs/devel/testing.rst: add missing newlines after code block
qemu-iotests: fix filename containing checks
tests/tcg/README: fix location for lm32 tests
memory.h: fix typos in comments
vga_int: remove unused function protype
configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement MIPS specific prctl() PR_SET_FP_MODE and PR_GET_FP_MODE emulation.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Floating-point mode is calculated from MIPS.abiflags FP ABI value
(based on kernel implementation). Illegal combinations are rejected.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Set fp_abi and interp_fp_abi values to current fp_abi value read from
MIPS.abiflags.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Read MIPS.abiflags section from ELF file into Mips_elf_abiflags_v0 struct.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add MIPS specific image_info struct fields fp_abi and interp_fp_abi
to store executable and interpreter fp_abi values (based on kernel
struct arch_elf_state in mips/include/asm/elf.h).
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJb0HIuAAoJENSXKoln91plGcUH/3Lje5KF8kkShQ5dIrH9e8Xz
bvK6lXOLNnndEyrWqJNLaJs7eJKEV2N+E2sBmdIjKnWXVHW6gOW3QBMuVGPTT4rg
C6cntrh2HpnxibgJqrR+3RmjQHAI1Ktixhker9LWimF3ZZhcy4H6mFHwW9z7eBK4
+n/pbnk8fq4FlGHJ2teHhctVIma6slmd8lkMa9vdwVQwpAyzpP82XjrsoTeeYhmG
uuTvX3TFnXKGa9mYGxybpwKd4i+397l9fTQ4egx1KlZMR8OHuQItCBDOFdiQpHOg
yljCeG3jHEhNzVf+xW7JU692Lz097otWDbzWDJibYGJkdkhKfyHJ9PvCYaPiK6M=
=Sg8J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2' into staging
MIPS queue for October 2018 - part 2 - v2
# gpg: Signature made Wed 24 Oct 2018 14:22:54 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2: (33 commits)
target/mips: Fix decoding of ALIGN and DALIGN instructions
target/mips: Fix the title of translate.c
linux-user/mips: Recognize the R5900 CPU model
target/mips: Define the R5900 CPU
tests/tcg/mips: Add tests for R5900 DIVU1
tests/tcg/mips: Add tests for R5900 DIV1
tests/tcg/mips: Add tests for R5900 MTLO1 and MTHI1
tests/tcg/mips: Add tests for R5900 MFLO1 and MFHI1
tests/tcg/mips: Add tests for R5900 three-operand MULTU1
tests/tcg/mips: Add tests for R5900 three-operand MULT1
tests/tcg/mips: Add tests for R5900 three-operand MULTU
tests/tcg/mips: Add tests for R5900 three-operand MULT
target/mips: Make R5900 DMULT[U], DDIV[U], LL[D] and SC[D] user only
target/mips: Support R5900 MOVN, MOVZ and PREF instructions from MIPS IV
target/mips: Support R5900 DIV1 and DIVU1 instructions
target/mips: Support R5900 MFLO1, MTLO1, MFHI1 and MTHI1 instructions
target/mips: Support R5900 three-operand MULT1 and MULTU1 instructions
target/mips: Support R5900 three-operand MULT and MULTU instructions
target/mips: Add a placeholder for R5900 MMI3 instruction subclass
target/mips: Add a placeholder for R5900 MMI2 instruction subclass
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This kind of ELF for the R5900 relies on an IEEE 754-1985 compliant FPU.
The R5900 FPU hardware is noncompliant and it is therefore emulated in
software by the Linux kernel. QEMU emulates a compliant FPU accordingly.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both arm and thumb2 division are controlled by the same ISAR field,
which takes care of the arm implies thumb case. Having M imply
thumb2 division was wrong for cortex-m0, which is v6m and does not
have thumb2 at all, much less thumb2 division.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most of the v8 extensions are self-contained within the ISAR
registers and are not implied by other feature bits, which
makes them the easiest to convert.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- request bflt support in configure;
- implement custom linux-user/xtensa/target_flat.h that doesn't put envp
on stack;
- fix #include "target_flat.h" in flatload.c so that it first search for
arch-customized version of the header.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Userspace submits a USB Request Buffer to the kernel, optionally
discards it, and finally reaps the URB. Thunk buffers from target
to host and back.
Tested by running an i386 scanner driver on ARMv7 and by running
the PowerPC lsusb utility on x86_64. The discardurb ioctl is
not exercised in these tests.
Signed-off-by: Cortland Tölva <cst@tolva.net>
Message-Id: <20181008163521.17341-4-cst@tolva.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add infrastructure for handling MIPS-specific prctl(). This is,
for now, just an empty placeholder. The real handling will be
implemented in subsequent patches.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add MIPS-specific prctl() options TARGET_PR_SET_FP_MODE and
TARGET_PR_SET_FP_MODE. These values are essentially copied from
linux kernel header include/uapi/linux/prctl.h.
This is done in a way consistent with a similar case of
aarch64-specific prctl() options TARGET_PR_SVE_SET_VL and
TARGET_PR_SVE_GET_VL.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Remove a comment suggesting that we need to call tb_flush()
after writing the SPARC signal frame trampoline insns.
This isn't necessary in QEMU, because (even if the guest
architecture requires explicit icache maintenance) we
ensure that memory writes result in invalidation of
translated code from that memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181009184017.15675-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Our __get_user_e() and __put_user_e() macros cause newer versions
of clang to generate false-positive -Waddress-of-packed-member
warnings if they are passed the address of a member of a packed
struct (see https://bugs.llvm.org/show_bug.cgi?id=39113).
Suppress these using the _Pragma() operator. Unfortunately
_Pragma() support in gcc is broken in some gcc versions and
in some usage contexts, so we limit the pragma usage here to clang.
To put in the pragmas we need to convert the macros from
expressions to statements, but all the callsites effectively
treat them as statements already so this is OK.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181009161814.21257-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
setrlimit guest calls that affect memory resources
(RLIMIT_{AS,DATA,STACK}) may interfere with QEMU internal memory
management. They may result in QEMU lockup because mprotect call in
page_unprotect would fail with ENOMEM error code, causing infinite loop
of SIGSEGV. E.g. it happens when running libstdc++ testsuite for xtensa
target on x86_64 host.
Don't call host setrlimit for memory-related resources.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20180917181314.22551-1-jcmvbkbc@gmail.com>
[lv: rebase on master]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Bring linux-user write(2) handling into line with linux for the case
of a 0-byte write with a NULL buffer. Based on a patch originally
written by Zhuowei Zhang.
Addresses https://bugs.launchpad.net/qemu/+bug/1716292.
>From Zhuowei Zhang's patch (https://lists.gnu.org/archive/html/qemu-devel/2017-09/msg08073.html):
Linux returns success for the special case of calling write with a
zero-length NULL buffer: compiling and running
int main() {
ssize_t ret = write(STDOUT_FILENO, NULL, 0);
fprintf(stderr, "write returned %ld\n", ret);
return 0;
}
gives "write returned 0" when run directly, but "write returned
-1" in QEMU.
This commit checks for this situation and returns success if
found.
Subsequent discussion raised the following questions (and my answers):
- Q. Should TARGET_NR_read pass through to safe_read in this
situation too?
A. I'm wary of changing unrelated code to the specific problem I'm
addressing. TARGET_NR_read is already consistent with Linux for
this case.
- Q. Do pread64/pwrite64 need to be changed similarly?
A. Experiment suggests not: both linux and linux-user yield -1 for
NULL 0-length reads/writes.
Signed-off-by: Tony Garnock-Jones <tonygarnockjones@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180908182205.GB409@mornington.dcs.gla.ac.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If the hostpage size is greater than the TARGET_PAGESIZE, the
target-pages of size TARGET_PAGESIZE are marked valid only till the
length requested during the elfload. The glibc attempts to consume unused
space in the last page of data segment(__libc_memalign() in
elf/dl-minimal.c). If PT_LOAD p_align is greater than or
equal to hostpage size, the GLRO(dl_pagesize) is actually the host pagesize
as set in the auxillary vectors. So, there is no explicit mmap request for
the remaining target-pages on the last hostpage. The glibc assumes that
particular space as available and subsequent attempts to use
those addresses lead to crash as the target_mmap has not marked them valid
for those target-pages.
The issue is seen when trying to chroot to 16.04-x86_64 ubuntu on a PPC64
host where the fork fails to access the thread_id as it is allocated on a
page not marked valid. The recent glibc doesn't have checks for thread-id in
fork, but the issue can manifest somewhere else, none the less.
The fix here is to map all the target-pages of the hostpage during the
elfload if the p_align is greater than or equal to hostpage size, for
data segment to allow the glibc for proper consumption.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <153553435604.51992.5640085189104207249.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Original implementation for setsockopt by Chen Gang[1]; all bugs mine,
including removing assignment for optname which hopefully makes the
logic easier to follow and moving some variables to make the code
more selfcontained.
[1] http://patchwork.ozlabs.org/patch/565659/
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Co-Authored-By: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180824085601.6259-1-carenas@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This will ease to move out syscall functions from syscall.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180823222215.13781-1-laurent@vivier.eu>
This adds the HWCAP2 bit to detect if a linux user process is
running on an ISA 3.0 compliant cpu like POWER9. This can be
verified using a simple test program that prints the value in
the auxiliary vector for AT_HWCAP2 as shown below.
Before:
$ qemu-ppc64le -cpu power8 test
0x8c000000
$ qemu-ppc64le -cpu power9 test
0x8c000000
After:
$ qemu-ppc64le -cpu power8 test
0x8c000000
$ qemu-ppc64le -cpu power9 test
0x8c800000
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
nanoMIPS is always NaN2008 compliant, and rules for checking
FCR31's NAN2008 bit are obsoleted.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Starting from nanoMIPS introduction, machine variant can be
EM_MIPS or EM_NANOMIPS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Implement support for nanoMIPS LLWP/SCWP instructions. Beside
adding core functionality of these instructions, this patch adds
support for availability control via configuration bit XNP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Dimitrije Nikolic <dnikolic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlt+5OYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPtxwf8CQM/F+0L+EKeYfYcVgVZsDhhOkLj
Pm61q0bZsWKLby5jCqIDYw7Z/vodJnSS1DO0slIRoXxvQ9DwlkbBnBy/aG/E9U0q
WF1vbCezibDIt7sGcsu9F5zXU9eqe+E6dZfxFrv8FQSOFVxn34TfeJagWLCtzg0d
LnVTF/e4zJD8IQiM7w6lJQxua3fz13ssPEg2KnMkguDhACMwvZ/K/cA2AJkHRMhY
sroPMwLHlrF1NOoeCIrWxYUmSGCRCAy1DmiPGiiSs0yBq/dL0UkAa5Eu6HMQ7rgI
zUff3JDmzEjixUSIEbpVRN+yPCN0/ACSOpJUrKLDxXbc4nZ+PBQ04YpyPQ==
=UZiV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* x86 TCG fixes for 64-bit call gates (Andrew)
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)
# gpg: Signature made Thu 23 Aug 2018 17:46:30 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
KVM: cleanup unnecessary #ifdef KVM_CAP_...
target/i386: update MPX flags when CPL changes
i2c: pm_smbus: Add the ability to force block transfer enable
i2c: pm_smbus: Don't delay host status register busy bit when interrupts are enabled
i2c: pm_smbus: Add interrupt handling
i2c: pm_smbus: Add block transfer capability
i2c: pm_smbus: Make the I2C block read command read-only
i2c: pm_smbus: Fix the semantics of block I2C transfers
i2c: pm_smbus: Clean up some style issues
pc-dimm: assign and verify the "addr" property during pre_plug
pc: drop memory region alignment check for 0
util/oslib-win32: indicate alignment for qemu_anon_ram_alloc()
pc-dimm: assign and verify the "slot" property during pre_plug
ipmi: Use proper struct reference for BT vmstate
vhost-scsi: expose 't10_pi' property for VIRTIO_SCSI_F_T10_PI
vhost-scsi: unify vhost-scsi get_features implementations
vhost-user-scsi: move host_features into VHostSCSICommon
cpus: allow cpu_get_ticks out of BQL
cpus: protect TimerState writes with a spinlock
seqlock: add QemuLockable support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Iterating over the list without using atomics is undefined behaviour,
since the list can be modified concurrently by other threads (e.g.
every time a new thread is created in user-mode).
Fix it by implementing the CPU list as an RCU QTAILQ. This requires
a little bit of extra work to traverse list in reverse order (see
previous patch), but other than that the conversion is trivial.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-12-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no point in listing a syscall if you want the same effect as
not listing it. In one less trivial case, the goto was demonstrably
not reachable.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180818190118.12911-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Transform outermost "break" to "return ret". If the immediately
preceeding statement was an assignment to ret, return the value
directly.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180818190118.12911-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There was supposed to be a single point of return for do_syscall
so that tracing works properly. However, there are a few bugs
in that area. It is significantly simpler to simply split out
an inner function to enforce this.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180818190118.12911-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is redundant with both -strace and actual tracing.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180818190118.12911-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Following commit will introduce RTA_PREF that appears only with
kernel v4.1. To avoid to manage a specific case for it, this patch
introduces the full list of rtattr_type_t prefixed with QEMU_ (as we
did for IFLA values)
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820171557.7734-3-laurent@vivier.eu>
[lv: added more RTA_* from linux v4.18]
If recvmsg()/recvfrom() are used with the MSG_TRUNC flag, they return the
real length even if it was longer than the passed buffer.
So when we translate the buffer we must check we don't go beyond the
end of the buffer.
Bug: https://github.com/vivier/qemu-m68k/issues/33
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180820171557.7734-2-laurent@vivier.eu>
sparc32plus has 64bit long type but only 32bit virtual address space.
For instance, "apt-get upgrade" failed because of a mmap()/msync()
sequence.
mmap() returned 0xff252000 but msync() used g2h(0xffffffffff252000)
to find the host address. The "(target_ulong)" in g2h() doesn't fix the
address because it is 64bit long.
This patch introduces an "abi_ptr" that is set to uint32_t
if the virtual address space is addressed using 32bit in the linux-user
case. It stays set to target_ulong with softmmu case.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180814171217.14680-1-laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[lv: added "%" in TARGET_ABI_FMT_ptr "%"PRIx64]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbdbIoAAoJENSXKoln91pl9KwIAJQ0CB4V/eRlvPOj828qLJyt
FxCETpCKBD1mSRX80E2HdYdaj8KfhhKrd9R2Wrk2VsiTQhLA0+hYsLxuT8VfPjsX
8WSN7egxzzA8Hzm1+wbwFCDNL13xjuhHWPk9YA1RYS6eQJot/Y27KYfvt/OPTrBO
jGaTmvXOE9q3qXZczP2TwipYkehg1+Ss5ZJl7dUmHc3Iek5t/H+kumkhBPoJqwAQ
wcwQuPm2KRGLuq9aB2IVbtfJA5Rme1GMFDWZicitJX2uK+Mx76fgi9IorrW6XAyM
6LM8DjvrivxW+UgZ+3QdJKkQCbyIrXqDAp1MRd3CWMlB576WWKm6RUTZclSo9gI=
=m1CJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-aug-2018' into staging
MIPS queue Aug 16, 2018
# gpg: Signature made Thu 16 Aug 2018 18:19:36 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-aug-2018:
qemu-doc: Amend MIPS-related items
linux-user: Add preprocessor availability control to some syscalls
linux-user: Update MIPS syscall numbers up to kernel 4.18 headers
elf: Add ELF flags for MIPS machine variants
elf: Remove duplicate preprocessor constant definition
target/mips: Check ELPA flag only in some cases of MFHC0 and MTHC0
target/mips: Don't update BadVAddr register in Debug Mode
target/mips: Implement CP0 Config1.WR bit functionality
target/mips: Add CP0 BadInstrX register
target/mips: Update some CP0 registers bit definitions
target/mips: Fix two instances of shadow variables
target/mips: Mark switch fallthroughs with interpretable comments
target/mips: Avoid case statements formulated by ranges - part 2
target/mips: Avoid case statements formulated by ranges - part 1
MAINTAINERS: Update target/mips maintainer's email addresses
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add ability to target platforms to individually include user-mode
support for system calls from "stat" group of system calls.
This change is related to new nanoMIPS platform in the sense that
it supports a different set of "stat" system calls than any other
target. nanoMIPS does not support structures stat and stat64 at
all. Also, support for certain number of other system calls is
dropped in nanoMIPS (those are most of the time obsoleted system
calls).
Without this patch, build for nanoMIPS would fail.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
