We can use seen.values() instead if we make it an OrderedDict.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-5-git-send-email-armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-9-git-send-email-eblake@redhat.com>
This hunk
@@ -964,6 +965,7 @@ class QAPISchemaObjectType(QAPISchemaType):
members = []
seen = {}
for m in members:
+ assert c_name(m.name) not in seen
seen[m.name] = m
for m in self.local_members:
m.check(schema, members, seen)
is plainly broken.
Asserting the members inherited from base don't clash is somewhat
redundant, because self.base.check() just checked that. But it
doesn't hurt.
The idea to use c_name(m.name) instead of m.name for collision
checking is sound, because we need to catch clashes between the m.name
and between the c_name(m.name), and when two m.name clash, then their
c_name() also clash.
However, using c_name(m.name) instead of m.name in one of several
places doesn't work. See the very next line.
Keep the assertion, but drop the c_name() for now. A future commit
will bring it back.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-4-git-send-email-armbru@redhat.com>
[change TABs in commit message to space]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-8-git-send-email-eblake@redhat.com>
QAPISchemaObjectTypeVariants.check() parameter members and
QAPISchemaObjectTypeVariant.check() parameter seen are no longer used,
drop them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-3-git-send-email-armbru@redhat.com>
[rebase to earlier changes that moved tag_member.check() of
alternate types]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-7-git-send-email-eblake@redhat.com>
QAPISchemaObjectTypeMember.check() currently does four things:
1. Compute self.type
2. Accumulate members in all_members
Only one caller cares: QAPISchemaObjectType.check() uses it to
compute self.members. The other callers pass a throw-away
accumulator.
3. Accumulate a map from names to members in seen
Only one caller cares: QAPISchemaObjectType.check() uses it to
compute its local variable seen, for self.variants.check(), which
uses it to compute self.variants.tag_member from
self.variants.tag_name. The other callers pass a throw-away
accumulator.
4. Check for collisions
This piggybacks on 3: before adding a new entry, we assert it's new.
Only one caller cares: QAPISchemaObjectType.check() uses it to
assert non-variant members don't clash.
Simplify QAPISchemaObjectType.check(): move 2.-4. to
QAPISchemaObjectType.check(), and drop parameters all_members and
seen.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-2-git-send-email-armbru@redhat.com>
[rebase to earlier changes that moved tag_member.check() of
alternate types, commit message typo fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-6-git-send-email-eblake@redhat.com>
Union tag values can't clash with member names in generated C anymore
since commit e4ba22b, but QAPISchemaObjectTypeVariants.check() still
asserts they don't. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1446559499-26984-1-git-send-email-armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-5-git-send-email-eblake@redhat.com>
We were previously creating all unions with an empty list for
local_members. However, it will make it easier to unify struct
and union generation if we include the generated tag member in
local_members. That way, we can have a common code pattern:
visit the base (if any), visit the local members (if any), visit
the variants (if any). The local_members of a flat union
remains empty (because the discriminator is already visited as
part of the base). Then, by visiting tag_member.check() during
AlternateType.check(), we no longer need to call it during
Variants.check().
The various front end entities now exist as follows:
struct: optional base, optional local_members, no variants
simple union: no base, one-element local_members, variants with tag_member
from local_members
flat union: base, no local_members, variants with tag_member from base
alternate: no base, no local_members, variants
With the new local members, we require a bit of finesse to
avoid assertions in the clients.
No change to generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-2-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have separated union tag values from colliding with
non-variant C names, by naming the union 'u', we should reserve
this name for our use. Note that we want to forbid 'u' even in
a struct with no variants, because it is possible for a future
qemu release to extend QMP in a backwards-compatible manner while
converting from a struct to a flat union. Fortunately, no
existing clients were using this member name. If we ever find
the need for QMP to have a member 'u', we could at that time
relax things, perhaps by having c_name() munge the QMP member to
'q_u'.
Note that we cannot forbid 'u' everywhere (by adding the
rejection code to check_name()), because the existing QKeyCode
enum already uses it; therefore we only reserve it as a struct
type member name.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-24-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
This patch is the front end for a series that converts to a
saner qapi union layout. By the end of the series, we will no
longer have the type/kind mismatch, and all tag values will be
under a named union, which requires clients to access
'obj->u.value' instead of 'obj->value'. But since the
conversion touches a number of files, it is easiest if we
temporarily support BOTH layouts simultaneously.
Given a simple union qapi type:
{ 'union':'Foo', 'data': { 'a':'int', 'b':'bool' } }
make the following changes in generated qapi-types.h:
| struct Foo {
|- FooKind kind;
|- union { /* union tag is @kind */
|+ union {
|+ FooKind kind;
|+ FooKind type;
|+ };
|+ union { /* union tag is @type */
| void *data;
| int64_t a;
| bool b;
|+ union { /* union tag is @type */
|+ void *data;
|+ int64_t a;
|+ bool b;
|+ } u;
| };
| };
Flat unions do not need the anonymous union for the tag member,
as we already fixed that to use the member name instead of 'kind'
back in commit 0f61af3e.
One additional change is needed in qapi.py: check_union() now
needs to check for collisions with 'type' in addition to those
with 'kind'.
Later, when the conversions are complete, we will remove the
duplication hacks, and also drop the check_union() restrictions.
Note, however, that we do not rename the generated enum, which
is still 'FooKind'. A further patch could generate implicit
enums as 'FooType', but while the generator already reserved
the '*Kind' namespace (commit 4dc2e69), there are already QMP
constructs with '*Type' naming, which means changing our
reservation namespace would have lots of churn to C code to
deal with a forced name change.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-13-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
c_name() produces names starting with 'q_' when protecting a
dictionary member name that would fail to directly compile, but
in doing so can cause clashes with any member name already
beginning with 'q-' or 'q_'. Likewise, we create a C name 'has_'
for any optional member that can clash with any member name
beginning with 'has-' or 'has_'.
Technically, rather than blindly reserving the namespace,
we could try to complain about user names only when an actual
collision occurs, or even teach c_name() how to munge names
to avoid collisions. But it is not trivial, especially when
collisions can occur across multiple types (such as via
inheritance or flat unions). Besides, no existing .json
files are trying to use these names. So it's easier to just
outright forbid the potential for collision. We can always
relax things in the future if a real need arises for QMP to
express member names that have been forbidden here.
'has_' only has to be reserved for struct/union member names,
while 'q_' is reserved everywhere (matching the fact that
only members can be optional, while we use c_name() for munging
both members and entities). Note that we could relax 'q_'
restrictions on entities independently from member names; for
example, c_name('qmp_' + 'unix') would result in a different
function name than our current 'qmp_' + c_name('unix').
Update and add tests to cover the new error messages.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-6-git-send-email-eblake@redhat.com>
[Consistently pass protect=False to c_name(); commit message tweaked
slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Type names ending in 'List' can clash with qapi list types in
generated C. We don't currently use such names. It is easier to
outlaw them now than to worry about how to resolve such a clash
in the future. For precedence, see commit 4dc2e69, which did the
same for names ending in 'Kind' versus implicit enum types for
qapi unions.
Update the testsuite to match.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-5-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rather than slicing the end of a string, we can use python's
endswith(). And rather than creating a set of characters,
we can search for a character within a string.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-3-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A future patch will move some error checking from the parser
to the various QAPISchema*.check() methods, which run only
after parsing completes. It will thus be possible to create
a python instance representing an implicit QAPI type that
parses fine but will fail validation during check(). Since
all errors have to have an associated 'info' location, we
need a location to be associated with those implicit types.
The intuitive info to use is the location of the enclosing
entity that caused the creation of the implicit type.
Note that we do not anticipate builtin types being used in
an error message (as they are not part of the user's QAPI
input, the user can't cause a semantic error in their
behavior), so we exempt those types from requiring info, by
setting a flag to track the completion of _def_predefineds(),
and tracking that flag in _def_entity().
No change to the generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1444710158-8723-13-git-send-email-eblake@redhat.com>
[Missing QAPISchemaArrayType.is_implicit() supplied]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For simple unions, we were creating the implicit 'type' tag
member during the QAPISchemaObjectTypeVariants constructor.
This is different from every other implicit QAPISchemaEntity
object, which get created by QAPISchema methods. Hoist the
creation to the caller (renaming _make_tag_enum() to
_make_implicit_tag()), and pass the entity rather than the
string name, so that we have the nice property that no
entities are created as a side effect within a different
entity. A later patch will then have an easier time of
associating location info with each entity creation.
No change to generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1444710158-8723-10-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit ac88219a had several TODO markers about whether we needed
to automatically create the corresponding array type alongside
any other type. It turns out that most of the time, we don't!
There are a few exceptions: 1) We have a few situations where we
use an array type in internal code but do not expose that type
through QMP; fix it by declaring a dummy type that forces the
generator to see that we want to use the array type.
2) The builtin arrays (such as intList for QAPI ['int']) must
always be generated, because of the way our QAPI_TYPES_BUILTIN
compile guard works: we have situations (at the very least
tests/test-qmp-output-visitor.c) that include both top-level
"qapi-types.h" (via "error.h") and a secondary
"test-qapi-types.h". If we were to only emit the builtin types
when used locally, then the first .h file would not include all
types, but the second .h does not declare anything at all because
the first .h set QAPI_TYPES_BUILTIN, and we would end up with
compilation error due to things like unknown type 'int8List'.
Actually, we may need to revisit how we do type guards, and
change from a single QAPI_TYPES_BUILTIN over to a different
usage pattern that does one #ifdef per qapi type - right now,
the only types that are declared multiple times between two qapi
.json files for inclusion by a single .c file happen to be the
builtin arrays. But now that we have QAPI 'include' statements,
it is logical to assume that we will soon reach a point where
we want to reuse non-builtin types (yes, I'm thinking about what
it will take to add introspection to QGA, where we will want to
reuse the SchemaInfo type and friends). One #ifdef per type
will help ensure that generating the same qapi type into more
than one qapi-types.h won't cause collisions when both are
included in the same .c file; but we also have to solve how to
avoid creating duplicate qapi-types.c entry points. So that
is a problem left for another day.
Generated code for qapi-types and qapi-visit is drastically
reduced; less than a third of the arrays that were blindly
created were actually needed (a quick grep shows we dropped
from 219 to 69 *List types), and the .o files lost more than
30% of their bulk. [For best results, diff the generated
files with 'git diff --patience --no-index pre post'.]
Interestingly, the introspection output is unchanged - this is
because we already cull all types that are not indirectly
reachable from a command or event, so introspection was already
using only a subset of array types. The subset of types
introspected is now a much larger percentage of the overall set
of array types emitted in qapi-types.h (since the larger set
shrunk), but still not 100% (evidence that the array types
emitted for our new Dummy structs, and the new struct itself,
don't affect QMP).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1444710158-8723-9-git-send-email-eblake@redhat.com>
[Moved array info tracking to a later patch]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A future patch will enable error reporting from the various
QAPISchema*.check() methods. But to report an error related
to an implicit type, we'll need to associate a location with
the type (the same location as the top-level entity that is
causing the creation of the implicit type), and once we do
that, keying off of whether foo.info exists is no longer a
viable way to determine if foo is an implicit type.
Instead, add an is_implicit() method to QAPISchemaEntity, and use it.
It can be overridden later for ObjectType and EnumType, when implicit
instances of those classes gain info.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1444710158-8723-8-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qapi-schema-test was already testing that we could have a
command returning int, but burned a command name in the whitelist.
Merge the redundant positive test returns-int, and pick a name
that reduces the whitelist size.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1444710158-8723-6-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next few patches will start migrating error checking from
ad hoc parse methods into the QAPISchema*.check() methods. But
for an error message to display, we first have to fix the
overall 'try' to catch those errors. We also want to enable a
few more assertions, such as making sure every attempt to
raise a semantic error is passed a valid location info, or that
various preconditions hold.
The general approach for moving error checking will then be to
relax an assertion into an if that raises an exception if the
condition does not hold, and removing the counterpart ad hoc
check done during the parse phase.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1444710158-8723-3-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Previously, qapi-types and qapi-visit filtered out implicit
objects during visit_object_type() by using 'info' (works since
implicit objects do not [yet] have associated info); meanwhile
qapi-introspect filtered out all schema types on the first pass
by returning a python type from visit_begin(), which was then
used at a distance in QAPISchema.visit() to do the filtering.
Rather than keeping these ad hoc approaches, add a new visitor
callback visit_needed() which returns False to skip a given
entity, and which defaults to True unless overridden. Use the
new mechanism to simplify all three filtering visitors.
No change to the generated code.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1444710158-8723-2-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since we have consolidated all generated code to use 'err' as
the name of the local variable for error detection, we can
simplify the decision on whether to skip error detection (useful
for deallocation paths) to be a boolean.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1443565276-4535-18-git-send-email-eblake@redhat.com>
[Change to gen_visit_fields() simplified]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Consolidate the code between visit, command marshalling, and
event generation that iterates over the members of a struct.
It reduces code duplication in the generator, so that a future
patch can reduce the size of generated code while touching only
one instead of three locations.
There are no changes to the generated marshal code.
The visitor code becomes slightly more verbose, but remains
semantically equivalent, and is actually easier to read as
it follows a more common idiom:
| visit_optional(v, &(*obj)->has_device, "device", &err);
|- if (!err && (*obj)->has_device) {
|- visit_type_str(v, &(*obj)->device, "device", &err);
|- }
| if (err) {
| goto out;
| }
|+ if ((*obj)->has_device) {
|+ visit_type_str(v, &(*obj)->device, "device", &err);
|+ if (err) {
|+ goto out;
|+ }
|+ }
The event code becomes slightly more verbose, but this is
arguably a bug fix: although the visitors are not well
documented, use of an optional member should not be attempted
unless guarded by a prior call to visit_optional(). Works only
because the output qmp visitor has a no-op visit_optional():
|+ visit_optional(v, &has_offset, "offset", &err);
|+ if (err) {
|+ goto out;
|+ }
| if (has_offset) {
| visit_type_int(v, &offset, "offset", &err);
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1443565276-4535-17-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qapi-commands has a nice helper gen_err_check(), but did not
use it everywhere. In fact, using it in more places makes it
easier to reduce the lines of code used for generating error
checks. This in turn will make it easier for later patches
to consolidate another common pattern among the generators.
The generated code has fewer blank lines in qapi-event.c functions,
but has no semantic difference.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1443565276-4535-16-git-send-email-eblake@redhat.com>
[Drop another blank line for symmetry]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rather than open-code the check for a valid base type, we
should reuse the common functionality. This allows for
consistent error messages, and also makes it easier for a
later patch to turn on support for inline anonymous base
structures.
Test flat-union-inline is updated to test only one feature
(anonymous branch dictionaries), which can be implemented
independently (test flat-union-bad-base already covers the
idea of an anonymous base dictionary).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1443565276-4535-10-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The previous commit added two tests that triggered an assertion
failure. It's fairly straightforward to avoid the failure by
just outright forbidding the collision between a union's tag
values and its discriminator name (including the implicit name
'kind' supplied for simple unions [*]). Ultimately, we'd like
to move the collision detection into QAPISchema*.check(), but
for now it is easier just to enhance the existing checks.
[*] Of course, down the road, we have plans to rename the simple
union tag name to 'type' to match the QMP wire name, but the
idea of the collision will still be present even then.
Technically, we could avoid the collision by naming the C union
members representing each enum value as '_case_value' rather
than 'value'; but until we have an actual qapi client (and not
just our testsuite) that has a legitimate reason to match a
case label to the name of a QMP key and needs the name munging
to satisfy the compiler, it's easier to just reject the qapi
as invalid.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1443565276-4535-7-git-send-email-eblake@redhat.com>
[Polished a few comments]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Silence pep8, and make pylint a bit happier. Just style cleanups,
plus killing a useless comment in camel_to_upper(); no semantic
changes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1443565276-4535-5-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
pylint recommends that every exception class should explicitly
invoke the superclass __init__, even though things seem to work
fine without it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1443565276-4535-4-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use of '"...%s" % include' to print non-strings can lead to
ugly messages, such as this (if the .json change is applied
without the qapi.py change):
Expected a file name (string), got: OrderedDict()
Better is to just omit the actual non-string value in the
message.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1443565276-4535-3-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qapi/introspect.json defines the introspection schema. It's designed
for QMP introspection, but should do for similar uses, such as QGA.
The introspection schema does not reflect all the rules and
restrictions that apply to QAPI schemata. A valid QAPI schema has an
introspection value conforming to the introspection schema, but the
converse is not true.
Introspection lowers away a number of schema details, and makes
implicit things explicit:
* The built-in types are declared with their JSON type.
All integer types are mapped to 'int', because how many bits we use
internally is an implementation detail. It could be pressed into
external interface service as very approximate range information,
but that's a bad idea. If we need range information, we better do
it properly.
* Implicit type definitions are made explicit, and given
auto-generated names:
- Array types, named by appending "List" to the name of their
element type, like in generated C.
- The enumeration types implicitly defined by simple union types,
named by appending "Kind" to the name of their simple union type,
like in generated C.
- Types that don't occur in generated C. Their names start with ':'
so they don't clash with the user's names.
* All type references are by name.
* The struct and union types are generalized into an object type.
* Base types are flattened.
* Commands take a single argument and return a single result.
Dictionary argument or list result is an implicit type definition.
The empty object type is used when a command takes no arguments or
produces no results.
The argument is always of object type, but the introspection schema
doesn't reflect that.
The 'gen': false directive is omitted as implementation detail.
The 'success-response' directive is omitted as well for now, even
though it's not an implementation detail, because it's not used by
QMP.
* Events carry a single data value.
Implicit type definition and empty object type use, just like for
commands.
The value is of object type, but the introspection schema doesn't
reflect that.
* Types not used by commands or events are omitted.
Indirect use counts as use.
* Optional members have a default, which can only be null right now
Instead of a mandatory "optional" flag, we have an optional default.
No default means mandatory, default null means optional without
default value. Non-null is available for optional with default
(possible future extension).
* Clients should *not* look up types by name, because type names are
not ABI. Look up the command or event you're interested in, then
follow the references.
TODO Should we hide the type names to eliminate the temptation?
New generator scripts/qapi-introspect.py computes an introspection
value for its input, and generates a C variable holding it.
It can generate awfully long lines. Marked TODO.
A new test-qmp-input-visitor test case feeds its result for both
tests/qapi-schema/qapi-schema-test.json and qapi-schema.json to a
QmpInputVisitor to verify it actually conforms to the schema.
New QMP command query-qmp-schema takes its return value from that
variable. Its reply is some 85KiBytes for me right now.
If this turns out to be too much, we have a couple of options:
* We can use shorter names in the JSON. Not the QMP style.
* Optionally return the sub-schema for commands and events given as
arguments.
Right now qmp_query_schema() sends the string literal computed by
qmp-introspect.py. To compute sub-schema at run time, we'd have to
duplicate parts of qapi-introspect.py in C. Unattractive.
* Let clients cache the output of query-qmp-schema.
It changes only on QEMU upgrades, i.e. rarely. Provide a command
query-qmp-schema-hash. Clients can have a cache indexed by hash,
and re-query the schema only when they don't have it cached. Even
simpler: put the hash in the QMP greeting.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'gen': false needs to stay for now, because netdev_add is still using
it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-25-git-send-email-armbru@redhat.com>
With the previous commit, the generated marshalers just work, and save
us a bit of handwritten code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-23-git-send-email-armbru@redhat.com>
It's first class, because unlike '**', it actually works, i.e. doesn't
require 'gen': false.
'**' will go away next.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Generated qapi-event.[ch] lose line breaks. No change otherwise.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-18-git-send-email-armbru@redhat.com>
Generate just 'FOO' instead of 'struct FOO' when possible.
Drop helper functions that are now unused.
Make pep8 and pylint reasonably happy.
Rename generate_FOO() functions to gen_FOO() for consistency.
Use more consistent and sensible variable names.
Consistently use c_ for mapping keys when their value is a C
identifier or type.
Simplify gen_enum() and gen_visit_union()
Consistently use single quotes for C text string literals.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1442401589-24189-14-git-send-email-armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
is_c_ptr() looks whether the end of the C text for the type looks like
a pointer. Works, but is fragile.
We now have a better tool: use QAPISchemaType method c_null(). The
initializers for non-pointers become prettier: 0, false or the
enumeration constant with the value 0 instead of {0}.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-13-git-send-email-armbru@redhat.com>
Duplicated in commit 21cd70d. Yes, we can't import qapi-types, but
that's no excuse. Move the helpers from qapi-types.py to qapi.py, and
replace the duplicates in qapi-event.py.
The generated event enumeration type's lookup table becomes
const-correct (see commit 2e4450f), and uses explicit indexes instead
of relying on order (see commit 912ae9c).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1442401589-24189-10-git-send-email-armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Output unchanged apart from reordering and white-space.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1442401589-24189-9-git-send-email-armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Fixes flat unions to get the base's base members. Test case is from
commit 2fc0043, in qapi-schema-test.json:
{ 'union': 'UserDefFlatUnion',
'base': 'UserDefUnionBase',
'discriminator': 'enum1',
'data': { 'value1' : 'UserDefA',
'value2' : 'UserDefB',
'value3' : 'UserDefB' } }
{ 'struct': 'UserDefUnionBase',
'base': 'UserDefZero',
'data': { 'string': 'str', 'enum1': 'EnumOne' } }
{ 'struct': 'UserDefZero',
'data': { 'integer': 'int' } }
Patch's effect on UserDefFlatUnion:
struct UserDefFlatUnion {
/* Members inherited from UserDefUnionBase: */
+ int64_t integer;
char *string;
EnumOne enum1;
/* Own members: */
union { /* union tag is @enum1 */
void *data;
UserDefA *value1;
UserDefB *value2;
UserDefB *value3;
};
};
Flat union visitors remain broken. They'll be fixed next.
Code is generated in a different order now, but that doesn't matter.
The two guards QAPI_TYPES_BUILTIN_STRUCT_DECL and
QAPI_TYPES_BUILTIN_CLEANUP_DECL are replaced by just
QAPI_TYPES_BUILTIN.
Two ugly special cases for simple unions now stand out like sore
thumbs:
1. The type tag is named 'type' everywhere, except in generated C,
where it's 'kind'.
2. QAPISchema lowers simple unions to semantically equivalent flat
unions. However, the C generated for a simple unions differs from
the C generated for its equivalent flat union, and we therefore
need special code to preserve that pointless difference for now.
Mark both TODO.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The visitor will help keeping the code generation code simple and
reasonably separated from QAPISchema details.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1442401589-24189-5-git-send-email-armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
New methods c_name(), c_type(), c_null(), json_type(),
alternate_qtype().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1442401589-24189-4-git-send-email-armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The QAPI code generators work with a syntax tree (nested dictionaries)
plus a few symbol tables (also dictionaries) on the side.
They have clearly outgrown these simple data structures. There's lots
of rummaging around in dictionaries, and information is recomputed on
the fly. For the work I'm going to do, I want more clearly defined
and more convenient interfaces.
Going forward, I also want less coupling between the back-ends and the
syntax tree, to make messing with the syntax easier.
Create a bunch of classes to represent QAPI schemata.
Have the QAPISchema initializer call the parser, then walk the syntax
tree to create the new internal representation, and finally perform
semantic analysis.
Shortcut: the semantic analysis still relies on existing check_exprs()
to do the actual semantic checking. All this code needs to move into
the classes. Mark as TODO.
Simple unions are lowered to flat unions. Flat unions and structs are
represented as a more general object type.
Catching name collisions in generated code would be nice. Mark as
TODO.
We generate array types eagerly, even though most of them aren't used.
Mark as TODO.
Nothing uses the new intermediate representation just yet, thus no
change to generated files.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
I want to name a new class QAPISchema.
While there, make it a new-style class.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-2-git-send-email-armbru@redhat.com>
The camel_to_upper() method applies some heuristics to turn
a mixed case type name into an all-uppercase name. This is
used for example, to generate enum constant name prefixes.
The heuristics don't also generate a satisfactory name
though. eg
{ 'enum': 'QCryptoTLSCredsEndpoint',
'data': ['client', 'server']}
Results in Q_CRYPTOTLS_CREDS_ENDPOINT_CLIENT. This has
an undesirable _ after the initial Q and is missing an
_ between the CRYPTO & TLS strings.
Rather than try to add more and more heuristics to try
to cope with this, simply allow the QAPI schema to
specify the desired enum constant prefix explicitly.
eg
{ 'enum': 'QCryptoTLSCredsEndpoint',
'prefix': 'QCRYPTO_TLS_CREDS_ENDPOINT',
'data': ['client', 'server']}
Now gives the QCRYPTO_TLS_CREDS_ENDPOINT_CLIENT name.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A feature new in Python 2.7 crept into commit 77e703b: re.subn()'s
fifth argument. Avoid that, use re.compile().
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1441640755-23902-1-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
check_type() first checks and peels off the array type, then checks
the element type. For two out of four error messages, it takes pains
to report errors for "array of T" instead of just T. Odd. Let's
examine the errors.
* Unknown element type, e.g.
tests/qapi-schema/args-array-unknown.json:
Member 'array' of 'data' for command 'oops' uses unknown type
'array of NoSuchType'
To make sense of this, you need to know that 'array of NoSuchType'
refers to '[NoSuchType]'. Easy enough. However, simply reporting
Member 'array' of 'data' for command 'oops' uses unknown type
'NoSuchType'
is at least as easy to understand.
* Element type's meta-type is inadmissible, e.g.
tests/qapi-schema/returns-whitelist.json:
'returns' for command 'no-way-this-will-get-whitelisted' cannot
use built-in type 'array of int'
'array of int' is technically not a built-in type, but that's
pedantry. However, simply reporting
'returns' for command 'no-way-this-will-get-whitelisted' cannot
use built-in type 'int'
avoids the issue, and is at least as easy to understand.
* The remaining two errors are unreachable, because the array checking
ensures that value is a string.
Thus, reporting some errors for "array of T" instead of just T works,
but doesn't really improve things. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The first check ensures the second one can't trigger. Drop the first
one, because the second one is in a more logical place, and emits a
nicer error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reproducer: with
{ 'command': 'user_def_cmd4', 'returns': { 'a': 'int' } }
added to qapi-schema-test.json, qapi-commands.py dies when it tries to
generate the command handler function
Traceback (most recent call last):
File "/work/armbru/qemu/scripts/qapi-commands.py", line 359, in <module>
ret = generate_command_decl(cmd['command'], arglist, ret_type) + "\n"
File "/work/armbru/qemu/scripts/qapi-commands.py", line 29, in generate_command_decl
ret_type=c_type(ret_type), name=c_name(name),
File "/work/armbru/qemu/scripts/qapi.py", line 927, in c_type
assert isinstance(value, str) and value != ""
AssertionError
because the return type doesn't exist.
Simply outlaw this usage, and drop or dumb down test cases accordingly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
A command's or event's 'data' must be a struct type, given either as a
dictionary, or as struct type name.
Commit dd883c6 tightened the checking there, but not enough: we still
accept 'union'. Fix to reject it.
We may want to support union types there, but we'll have to extend
qapi-commands.py and qapi-events.py for it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We don't actually enforce our "other than downstream extensions [...],
all names should begin with a letter" rule. Add a FIXME.
We should reject names that differ only in '_' vs. '.' vs. '-',
because they're liable to clash in generated C. Add a FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
gen_sync_call()'s parameter indent is useless: gen_sync_call() uses it
only as optional argument for push_indent() and pop_indent(), their
default is four, and gen_sync_call()'s only caller passes four. Drop
the parameter.
gen_visitor_input_containers_decl()'s parameter obj is always
"QOBJECT(args)". Use that, and drop the parameter.
Drop unused parameters of gen_marshal_output(),
gen_marshal_input_decl(), generate_visit_struct_body(),
generate_visit_list(), generate_visit_enum(), generate_declaration(),
generate_enum_declaration(), generate_decl_enum().
Drop unused variables in generate_event_enum_lookup(),
generate_enum_lookup(), generate_visit_struct_fields(), check_event().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
