Commit Graph

1715 Commits

Author SHA1 Message Date
Richard Henderson
5dd8990841 util: Introduce include/qemu/cpuid.h
Clang 3.9 passes the CONFIG_AVX2_OPT configure test.  However, the
supplied <cpuid.h> does not contain the bit_AVX2 define that we use
when detecting whether the routine can be enabled.

Introduce a qemu-specific header that uses the compiler's definition
of __cpuid et al, but supplies any missing bit_* definitions needed.
This avoids introducing any extra ifdefs to util/bufferiszero.c, and
allows quite a few to be removed from tcg/i386/tcg-target.inc.c.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170719044018.18063-1-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-24 12:42:55 +01:00
Peter Maydell
91939262ff configure: Drop ancient Solaris 9 and earlier support
Solaris 9 was released in 2002, its successor Solaris 10 was
released in 2005, and Solaris 9 was end-of-lifed in 2014.
Nobody has stepped forward to express interest in supporting
Solaris of any flavour, so removing support for the ancient
versions seems uncontroversial.

In particular, this allows us to remove a use of 'uname'
in configure that won't work if you're cross-compiling.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1499955697-28045-1-git-send-email-peter.maydell@linaro.org
2017-07-21 15:04:05 +01:00
Peter Maydell
951fedfcee configure: Never use 'uname' to identify target OS
For a very long time we have used 'uname -s' as our fallback if
we don't identify the target OS using a compiler #define. This
obviously doesn't work for cross-compilation, and we've had
a comment suggesting we fix this in configure for a long time.
Since we now have an exhaustive list of which OSes we can run
on (thanks to commit 898be3e041 making an unrecognized OS
be a fatal error), we know which ones we're missing.

Add check_define tests for the remaining OSes we support.  The
defines checked are based on ones we already use in the codebase for
identifying the host OS (with the exception of GNU/kFreeBSD).
We can now set bogus_os immediately rather than doing it later.

We leave the comment about uname being bad untouched, since
there is still a use of it for the fallback for unrecognized
host CPU type.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1499958932-23839-1-git-send-email-peter.maydell@linaro.org
2017-07-21 15:02:51 +01:00
Kamil Rytarowski
b1449edb79 configure: Don't build ivshmem tools unless CONFIG_IVSHMEM is set
Don't try to build the ivshmem-server and ivshmem-client tools unless
CONFIG_IVSHMEM is set.

This fixes in passing a build bug on NetBSD, which fails to build the
ivshmem tools because they use shm_open() and on NetBSD that requires
linking against -lrt.

Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-4-git-send-email-peter.maydell@linaro.org
[PMM: moved some code into earlier patches; minor bugfixes;
 added commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-20 14:58:19 +01:00
Kamil Rytarowski
e0580342b3 configure: Use an explicit CONFIG_IVSHMEM rather than CONFIG_EVENTFD
Rather than relying on everywhere that cares about whether the host
supports ivshmem using CONFIG_EVENTFD, make configure set an explicit
CONFIG_IVSHMEM.

Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-3-git-send-email-peter.maydell@linaro.org
[PMM: split out from another patch, add commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-20 14:58:19 +01:00
Peter Maydell
d4e59218ab Merge qcrypto 2017/07/18 v2
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZbyI5AAoJEL6G67QVEE/fyPUP/AlDNC/k0vr7jqaGciqsBelm
 k8Bi9aTEC+/A/tW4q2+insjbfmTZemGubMzmi4wk2vMn8flQRva7fYgnOCzwY4o5
 gsGPPDRK0QhOeyXfneTrfHTyLtcDRnWITCtdSIJk520NmL4a1ClWHtDbUW26+3z7
 MfWUnNZHamNtg+8AXxQf20xWsklMIchjKCtFLhB8KQxZcUEG9GayAoY9s/6Rv5pD
 QrmrJeRhDzW7pXMeQZoVPdiyXmzfd9yK3y/CT0Rk3l2P5miBn0kFn3nNCgh2EsF5
 JSh8F9SGK2dMhuJXUpsl9P2LzafPcsHVgNRo3s7qGpzQT3NhqvaZb7/tMsGizVvK
 cMgecDnWN0JreTVnLu4+4FPhs6XAcj8P3+rbrUdgJgH/2qrOISM+VXWHwPhQ8jUA
 R+yEmdzMWAgF2926Gm5X1iMWyBlzIYwXSoQDY5b40hO76FtPWHKgYY5g5aaLq6qO
 cTvw6dPHoHc6LDyuJ0m6htLSKjSSr86fv2FySBYr7Tbma2ZKK66vWQJ5xA8jA5QF
 vFd3esNT0AF+JsmpNsxoadzlBTBEl8sL58d4J4goJULY75VlTN/Fi+zWmNOU9nX2
 OWakEApSESHAeBeDd5+doLG9JqQEbeG9jBCS7vVJspEmivLd/PI3F/142zFnPItp
 iNpQXVpx2aMFZWs5ueot
 =iobN
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/berrange/tags/pull-qcrypto-2017-07-18-2' into staging

Merge qcrypto 2017/07/18 v2

# gpg: Signature made Wed 19 Jul 2017 10:11:21 BST
# gpg:                using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange/tags/pull-qcrypto-2017-07-18-2:
  tests: crypto: add hmac speed benchmark support
  tests: crypto: add hash speed benchmark support
  tests: crypto: add cipher speed benchmark support
  crypto: hmac: add af_alg-backend hmac support
  crypto: hash: add afalg-backend hash support
  crypto: cipher: add afalg-backend cipher support
  crypto: introduce some common functions for af_alg backend
  crypto: hmac: add hmac driver framework
  crypto: hmac: introduce qcrypto_hmac_ctx_new for glib-backend
  crypto: hmac: introduce qcrypto_hmac_ctx_new for nettle-backend
  crypto: hmac: introduce qcrypto_hmac_ctx_new for gcrypt-backend
  crypto: hmac: move crypto/hmac.h into include/crypto/
  crypto: hash: add hash driver framework
  crypto: cipher: add cipher driver framework
  crypto: cipher: introduce qcrypto_cipher_ctx_new for builtin-backend
  crypto: cipher: introduce qcrypto_cipher_ctx_new for nettle-backend
  crypto: cipher: introduce qcrypto_cipher_ctx_new for gcrypt-backend
  crypto: cipher: introduce context free function

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-19 20:45:37 +01:00
Longpeng(Mike)
f0d92b56d8 crypto: introduce some common functions for af_alg backend
The AF_ALG socket family is the userspace interface for linux
crypto API, this patch adds af_alg family support and some common
functions for af_alg backend. It'll be used by afalg-backend crypto
latter.

Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>

Maintainer: modified to report an error if AF_ALG is requested
but cannot be supported

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-07-19 10:11:05 +01:00
Igor Druzhinin
5ba3d75645 xen/mapcache: introduce xen_replace_cache_entry()
This new call is trying to update a requested map cache entry
according to the changes in the physmap. The call is searching
for the entry, unmaps it and maps again at the same place using
a new guest address. If the mapping is dummy this call will
make it real.

This function makes use of a new xenforeignmemory_map2() call
with an extended interface that was recently introduced in
libxenforeignmemory [1].

[1] https://www.mail-archive.com/xen-devel@lists.xen.org/msg113007.html

Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2017-07-18 14:16:09 -07:00
Tomáš Golembiovský
e674605f98 qemu-ga: check if utmpx.h is available on the system
Commit 161a56a906 added command guest-get-users and requires the
utmpx.h (defined by POSIX) to work. It is however not always available
(e.g. on OpenBSD) therefor a check for its existence is necessary.

Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-07-17 19:10:09 -05:00
Peter Maydell
fbc8ea1ed0 s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups
- add a network boot rom for s390 (Thomas Huth)
 - migration of storage attributes like the CMMA used/unused state
 - PCI related enhancements - full support for aen, ais and zpci
 - migration support for css with vmstates (Halil Pasic)
 - cpu model enhancements for cpu features
 - guarded storage support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJZaJ3gAAoJEBF7vIC1phx8VSAP/1zKh7ti4Y2dIVb94c1tvECE
 LRNdCdAPhEqL6zybty85aG04sjAmSu50NGfo5t8AGq1U9WBWrCy7/wWSFdK2GI63
 Umc1fR7aBF9FiFayKONhExaREh6gSWVHZF1RyaPIWnnjRIeX8nqgPEnpdZNiVVrG
 5cKHV2SUd5pMDJUiQdZGZgbgG1c+MWJx2BHoduM+K0UnmFjpyLCL4Rq58Q2Q87Nj
 /+yPSVApFFeMsDpem6DNttE6Msa+V+K+EmRhRKqZNOWrdRKH5vvj6Fl/LSxVtd9c
 CEG+aZGjFd693uP9ge0WmjeUJtVHIGt9xKdeU0d7FijZWehjsIqalLoqapzK8ddF
 h6HJuNsmk/SZF7O9JsbHT3Epyr+7Hk0dx78Ku1GNQuUxtFL93eyIJmRdgz7Zo3Lj
 ZTPJvCA13GjPWtgzG5dG3JH1hiAS+Yai18BgdzGbs+qfMCwPdbWkoqg7sARwAJNe
 50fo/ayJvcmHJnSNO6hErFoU38WctGgO8fWp+oVvD8Um1ny1aBFFuJgJIMf47nhu
 x1IdA6UGrNN0yNC4/UgyYBDV1hfvo/phMdoHqle9AcMmPYOD1DBr0genK/bYbICk
 Dio7og9nKgheLRBHz2u5TuYcCsfE/7rtwZX+iXMvoC7VE7Dqs+Q7Zjwwwtwj4x9F
 FwWuf/Bv1s6IkVLlP8Ow
 =2bOV
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20170714' into staging

s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups

- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support

# gpg: Signature made Fri 14 Jul 2017 11:33:04 BST
# gpg:                using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB  FBCA 117B BC80 B5A6 1C7C

* remotes/borntraeger/tags/s390x-20170714: (40 commits)
  s390x/gdb: add gs registers
  s390x/arch_dump: also dump guarded storage control block
  s390x/kvm: enable guarded storage
  s390x/kvm: Enable KSS facility for nested virtualization
  s390x/cpumodel: add esop/esop2 to z12 model
  s390x/cpumodel: we are always in zarchitecture mode
  s390x/cpumodel: wire up new hardware features
  s390x/flic: migrate ais states
  s390x/cpumodel: add zpci, aen and ais facilities
  s390x: initialize cpu firstly
  pc-bios/s390: rebuild s390-ccw.img
  pc-bios/s390: add s390-netboot.img
  pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load
  pc-bios/s390-ccw: Add virtio-net driver code
  pc-bios/s390-ccw: Add core files for the network bootloading program
  roms/SLOF: Update submodule to latest status
  pc-bios/s390-ccw: Add code for virtio feature negotiation
  pc-bios/s390-ccw: Remove unused structs from virtio.h
  pc-bios/s390-ccw: Move byteswap functions to a separate header
  pc-bios/s390-ccw: Add a write() function for stdio
  ...

Conflicts:
	target/s390x/kvm.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14 14:19:35 +01:00
Christian Borntraeger
86158a2a2b s390x/gdb: add gs registers
Let's provide the guarded storage registers via gdb server.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2017-07-14 12:29:49 +02:00
Paolo Bonzini
b98fcfd884 build: add -Wexpansion-to-defined
This warning is included in -Wall by clang, but not by GCC (which only
enables it for -Wextra).  Include it in the list of warnings we enable
to minimize the differences between the compilers:

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14 11:04:33 +02:00
Peter Maydell
aa5a704756 trivial patches for 2017-07-12
-----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAllmKxMPHG1qdEB0bHMu
 bXNrLnJ1AAoJEHAbT2saaT5Zl/MH/3Q3kQCJxqYItokv+LvZscBKeTJEmpM+Tvjj
 PRMst9odru643WBn43RMyePAOcBaQzGHvV9cyX6F2QUxqW0fe+uiRy+21rWo1N8v
 uYYjMdiB6yd+yru09NmcddiZE6U6Zfo3W7XYFdcyqF1+vzA1McY9Csw0OvhKPPS2
 iZnhW9SqEkw+eAf+NQJySo9pyXmLZ6i3D7HNwKetpj+N6cJtF6IK4wbgUHTNfK75
 fk/B5FOogvM+P0a+0Y5ipShVyCFkpDklH+ZK+PpuhRMBnwCClyDKSAQ0v6Fm8WNR
 O+GRsVP2e0grpKs8dIo6e2iX2siWi/oVyT5jSyQID0BO0kENLc8=
 =jY0M
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging

trivial patches for 2017-07-12

# gpg: Signature made Wed 12 Jul 2017 14:58:43 BST
# gpg:                using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931  4B22 701B 4F6B 1A69 3E59

* remotes/mjt/tags/trivial-patches-fetch:
  include/hw/ptimer.h: Add documentation comments
  hxtool: remove dead -q option
  qga-win32: Fix memory leak of device information set
  hw/core: fix missing return value in load_image_targphys_as()
  elf-loader: warn about invalid endianness
  configure: Handle having no c++ compiler in FORTIFY_SOURCE check
  hw/pci: define msi_nonbroken in pci-stub
  hw/misc: add missing includes
  configure: Fix build with pkg-config and --static --enable-sdl
  util/qemu-sockets: Drop unused helper socket_address_to_string()
  target/xtensa: gdbstub: drop dead return statement

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-13 16:15:52 +01:00
Paolo Bonzini
b5ed2e11ef build: disable Xen on ARM
While ARM could present the xenpv machine, it does not and trying to enable
it breaks compilation.  Revert to the previous test which only looked at
$target_name, not $cpu.

Fixes: 3b6b75506d
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170711100049.20513-1-pbonzini@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-11 11:23:47 +01:00
Peter Maydell
e189091fba configure: Handle having no c++ compiler in FORTIFY_SOURCE check
Our FORTIFY_SOURCE check assumes that $cxx refers to a working C++
compiler, with the result that if you don't happen to have one
then configure will spuriously print
  configure: line 4685: c++: command not found

Fix this by adding a 'has $cxx' check.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-11 11:18:37 +03:00
Thomas Huth
5f37e6d4a7 configure: Fix build with pkg-config and --static --enable-sdl
The configure script prefers pkg-config over sdl-config, but
the "--static-libs" parameter only exists for the latter. With
pkg-config, "--static --libs" have to be used instead.

Buglink: https://bugs.launchpad.net/qemu/+bug/984516
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-11 11:18:37 +03:00
Paolo Bonzini
b3f6ea7e55 configure: add --disable-tcg configure option
This lets you build without TCG (hardware accelerationor qtest only).  When
this flag is passed to configure, it will automatically filter out the target
list to only those that support KVM or Xen or HAX.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-04 14:39:28 +02:00
Paolo Bonzini
d880a3ba7d configure: early test for supported targets
Check for unsupported targets in target_list, and print an
error early in the configuration process.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-04 14:39:28 +02:00
Paolo Bonzini
3b6b75506d configure: factor out list of supported Xen/KVM/HAX targets
This will be useful when the functions are called, early in the configure
process, to filter out targets that do not support hardware acceleration.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-04 14:39:28 +02:00
Peter Maydell
b01a4fd3bd configure: Define NCURSES_WIDECHAR if we're using curses
We want the wide character functions from the ncurses header.
Unfortunately it doesn't provide them by default, but only
if either:
 * NCURSES_WIDECHAR is defined (for ncurses 20111030 and up)
 * _XOPEN_SOURCE/_XOPEN_SOURCE_EXTENDED are suitably defined

So far we have been implicitly relying on the latter, because
for GNU libc when we define _GNU_SOURCE this causes libc
to define the _XOPEN_SOURCE macros for us. Unfortunately
this doesn't work on all libcs, because some (like OSX and
musl libc) do not define _XOPEN_SOURCE when _GNU_SOURCE
is defined.

We can't fix this by defining _XOPEN_SOURCE ourselves, because
that also means "and don't provide any functions that aren't in
that standard", and not all libcs provide any way to override
that to also get the non-standard functions. In particular
FreeBSD has no such mechanism, and OSX's _DARWIN_C_SOURCE
doesn't reenable everything (for instance getpagesize()
is still not prototyped if _DARWIN_C_SOURCE and _XOPEN_SOURCE
are both defined).

So we have to define NCURSES_WIDECHAR. (This will only work
if your ncurses is at least 20111030, as older versions
don't honour this macro.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1496414138-7622-1-git-send-email-peter.maydell@linaro.org
2017-06-26 13:21:16 +01:00
Laurent Vivier
5a4526b26a target-m68k: define 96bit FP registers for gdb on 680x0
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170620205121.26515-5-laurent@vivier.eu>
2017-06-21 22:11:12 +02:00
Peter Maydell
7e56accdaf * nbd and qemu-nbd fixes (Eric, Max)
* nbd refactoring (Vladimir)
 * vhost-user-scsi, take N+1 (Felipe)
 * replace memory_region_set_fd with memory_region_init_ram_from_fd (Marc-André)
 * docs/ movement (Paolo)
 * megasas TOCTOU fixes (Paolo)
 * make async_safe_run_on_cpu work on kvm/hax accelerators (Paolo)
 * Build system and poison.h improvements (Thomas)
 * -accel thread=xxx fix (Thomas)
 * move files to accel/ (Yang Zhong)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJZQli7AAoJEL/70l94x66DYAUH/icBoGSyY70G033BxbWW+jPW
 pjqobQw3YnFmiHSkXy1Xd4LKa0dyrVdmVECOAvB0embiN6pIk2UpeT4aQNHffG3f
 Y9wMRKnp6RMLpzwRYbde4rAlitn52ecGIANtFUC6RTnL7wKCuh3beWruKmkudG8V
 ZAsmX30pPFJxtQYJ0/q3c2jB6V87h2GocRLAmy1lF5/X1pXQ2fiKOYOJvV3HDY1U
 UQ+Ixuf4tTbyBwTm4Lx2tD3+olkVTUvcATqxhI+1JKu6lE0Dgb58urYDOfvVPFDl
 98s6bU53f0gpOcb1/wKOAXKdZ2tvqRtwsP8IoPDnUpk8HGxbNWdofoxsO37vVIU=
 =zeKT
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* nbd and qemu-nbd fixes (Eric, Max)
* nbd refactoring (Vladimir)
* vhost-user-scsi, take N+1 (Felipe)
* replace memory_region_set_fd with memory_region_init_ram_from_fd (Marc-André)
* docs/ movement (Paolo)
* megasas TOCTOU fixes (Paolo)
* make async_safe_run_on_cpu work on kvm/hax accelerators (Paolo)
* Build system and poison.h improvements (Thomas)
* -accel thread=xxx fix (Thomas)
* move files to accel/ (Yang Zhong)

# gpg: Signature made Thu 15 Jun 2017 10:51:55 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (41 commits)
  vhost-user-scsi: Introduce a vhost-user-scsi sample application
  vhost-user-scsi: Introduce vhost-user-scsi host device
  qemu-doc: include version number
  docs: create interop/ subdirectory
  include/exec/poison: Mark some CONFIG defines as poisoned, too
  include/exec/poison: Add missing TARGET defines
  nbd/server: refactor nbd_trip
  nbd/server: rename rc to ret
  nbd/server: get rid of fail: return rc
  nbd/server: nbd_negotiate: fix error path
  nbd/server: remove NBDClientNewData
  nbd/server: refactor nbd_co_receive_request
  nbd/server: get rid of EAGAIN dead code
  nbd/server: refactor nbd_co_send_reply
  nbd/server: get rid of ssize_t
  nbd/server: get rid of nbd_negotiate_read and friends
  nbd: make nbd_drop public
  nbd: rename read_sync and friends
  accel: move kvm related accelerator files into accel/
  tcg: move tcg backend files into accel/tcg/
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-20 14:20:34 +01:00
Paolo Bonzini
d59157ea05 docs: create interop/ subdirectory
This is for the future interoperability & management guide.  It includes
the QAPI docs, including the automatically generated ones, other socket
protocols (vhost-user, VNC), and the qcow2 file format.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-15 11:18:39 +02:00
Yang Zhong
244f144134 tcg: move tcg backend files into accel/tcg/
move tcg-runtime.c, translate-all.(ch) and translate-common.c into
accel/tcg/ subdirectory and updated related trace-events file.

Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <1496383606-18060-4-git-send-email-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-15 11:04:06 +02:00
Gerd Hoffmann
8f4ea9cd0b sdl: prefer sdl2 over sdl1
In case the configure script finds both SDL 1.2 and SDL 2.x installed
it still prefers SDL 1.2.  Prefer SDL 2.x instead.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170606105339.3613-3-kraxel@redhat.com
2017-06-14 09:51:45 +02:00
Gerd Hoffmann
5fe309ff0d gtk: prefer gtk3 over gtk2
In case the configure script finds both gtk2 and gtk3 installed it
still prefers gtk2 over gtk3.  Prefer gtk3 instead.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170606105339.3613-2-kraxel@redhat.com
2017-06-14 09:51:45 +02:00
Peter Maydell
2a8469aaab -----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZOEC7AAoJEJykq7OBq3PIs4wIAMWtKbkZQkgqpHnSt4ZzpjkQ
 1lRLmM6HOqMO1SarK0PduSRafwgUD2q/24gk6UeqUbArZXK+7U3SnfsfEHkOqCdB
 +ELRPZ+/b77AEZzhCSZ7uHHvrISO5MtLW/z4Av8GB5KYARbO5aZgIyeg7Na29SDk
 vQoANktrtLgLHu0vZfSUTTmPMRJqcC/DMm/EukXapXVW+cEt23V+nohchFmw8VtF
 Uni17u26B7CJGZOGduD11CIIvQ9QX+acyDlknkCIqfwd3Xxle0Mu0S3IV4KH7zjn
 MIcF3hGQWeln5AZzQe998EC0Ko+pmPRooZaeUbrolp+KjK9OcRnNKr7O2jjvGkA=
 =9+yN
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging

# gpg: Signature made Wed 07 Jun 2017 19:06:51 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/block-pull-request:
  configure: split c and cxx extra flags
  coroutine-lock: do not touch coroutine after another one has been entered
  .gdbinit: load QEMU sub-commands when gdb starts
  coccinelle: fix typo in comment
  oslib: strip trailing '\n' from error_setg() string argument

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-12 14:14:42 +01:00
Abdallah Bouassida
b8158192fa target/i386: Add GDB XML description for SSE registers
Add an XML description for SSE registers (XMM+MXCSR) for both X86
and X86-64 architectures in the GDB stub:
- configure: Define gdb_xml_files for the X86 targets (32 and 64bit).
- gdb-xml/i386-32bit-sse.xml & gdb-xml/i386-64bit-sse.xml: The XML files
that contain a description of the XMM + MXCSR registers.
- gdb-xml/i386-32bit.xml & gdb-xml/i386-64bit.xml: wrappers that include
the XML file of the core registers and the other XML file of the SSE registers.
- target/i386/cpu.c: Modify the gdb_core_xml_file to the new XML wrapper,
  modify the gdb_num_core_regs to fit the registers number defined in each
  XML file.

Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-07 18:22:02 +02:00
Bruno Dominguez
11cde1c810 configure: split c and cxx extra flags
There was no possibility to add specific cxx flags using the configure
file. So A new entrance has been created to support it.

Duplication of information in configure and rules.mak. Taking
QEMU_CFLAGS and add them to QEMU_CXXFLAGS, now the value of
QEMU_CXXFLAGS is stored in config-host.mak, so there is no need for
it.

The makefile for libvixl was adding flags for QEMU_CXXFLAGS in
QEMU_CFLAGS because of the addition in rules.mak. That was removed, so
adding them where it should be.

Signed-off-by: Bruno Dominguez <bru.dominguez@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1496754467-20893-1-git-send-email-bru.dominguez@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-06-07 15:29:46 +01:00
Stefan Hajnoczi
3a586d2f0b .gdbinit: load QEMU sub-commands when gdb starts
The scripts/qemu-gdb.py file is not easily discoverable.  Add a .gdbinit
file so GDB either loads qemu-gdb.py automatically or prints a message
informing the user how to enable them (some systems disable ./.gdbinit
loading for security reasons).

Symlink .gdbinit and the scripts directory in order to make out-of-tree
builds work.  The scripts directory is used to find the qemu-gdb.py file
specified by a relative path in .gdbinit.

Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Eric Blake <eblake@redhat.com>
Message-id: 20170517124042.1430-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-06-07 14:38:45 +01:00
Richard Henderson
f1079bb8f9 tcg/sparc: Use the proper compilation flags for 32-bit
We have required a v9 cpu since 9b9c37c364.
However, the flags we were using did not reliably enable v8plus, which
meant that the compiler didn't know it could inline 64-bit atomics.

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-06-05 09:25:42 -07:00
Kamil Rytarowski
271f37abb5 configure: Detect native NetBSD curses(3)
NetBSD ships with traditional BSD curses with compatibility with ncurses.
qemu works nicely with the basesystem version of curses(3) from NetBSD.

The only mismatch between curses(3) and ncurses is the lack of
curses_version() in the NetBSD version. This function is used solely in
the configure script, therefore eliminate it from the curses(3) detection.

With this change applied, configure detects correctly curses frontend.

Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-06-04 18:42:55 +03:00
Niels de Vos
df3a429ae8 gluster: add support for PREALLOC_MODE_FALLOC
Add missing support for "preallocation=falloc" to the Gluster block
driver. This change bases its logic on that of block/file-posix.c and
removed the gluster_supports_zerofill() and qemu_gluster_zerofill()
functions in favour of #ifdef checks in an easy to read
switch-statement.

Both glfs_zerofill() and glfs_fallocate() have been introduced with
GlusterFS 3.5.0 (pkg-config glusterfs-api = 6). A #define for the
availability of glfs_fallocate() has been added to ./configure.

Reported-by: Satheesaran Sundaramoorthi <sasundar@redhat.com>
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Message-id: 20170528063114.28691-1-ndevos@redhat.com
URL: https://bugzilla.redhat.com/1450759
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
2017-06-02 10:51:47 -04:00
Greg Kurz
fcdcf1eed2 util: drop old utimensat() compat code
Now that 9pfs and virtfs-proxy-helper have been converted to utimensat(),
we don't need to keep qemu_utimens() anymore.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
2017-05-25 10:30:14 +02:00
Dr. David Alan Gilbert
ed1701c6a5 block migration: Allow compile time disable
Many users now prefer to use drive_mirror over NBD as an
alternative to the older migrate -b option; drive_mirror is
more complex to setup but gives you more options (e.g. only
migrating some of the disks if some of them are shared).

Allow the large chunk of block migration code to be compiled
out for those who don't use it.

Based on a downstream-patch we've had for a while by Jeff Cody.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>

--

- When compiled out, allow seting block only with false value (eric)
2017-05-18 18:04:54 +02:00
Anthony PERARD
d9506cab36 configure: Remove -lxencall for Xen detection
QEMU does not depends on libxencall, it was added because it was a
missing link dependency of libxendevicemodel, but now the later should
be built properly.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-05-16 11:49:46 -07:00
Kamil Rytarowski
3c2bdbc1e4 maintainers: Add myself as a NetBSD reviewer
I volunteer to review NetBSD patches.
Adding myself will help to not miss some of them.

Restore NetBSD as a maintained host.

All patches to make qemu/pkgsrc building have been emitted to review.

Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Message-id: 20170513022143.2838-1-n54@gmx.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-16 15:33:06 +01:00
Stefan Hajnoczi
2f77ec7390 ppc patch queue for 2017-05-11
This pull request supersedes the one from yesterday (20170510), fixing
 an important style bug in one patch, and adding an extra couple of
 simple patches.
 
 Highlights of this set:
   * Some fixes for POWER9
   * TCG support for POWER9 radix MMU
   * VGA rom for Mac machine types
   * Fixes for the XICS interrupt controller
   * MTTCG support for ppc targets
 
 As suggested by Paolo, I've tried to add the Docker tests to my
 standard pre-pull-request tests.  I haven't wholly suceeded; this has
 been tested with some of the Docker images, but others I haven't
 managed due to problems that as best I can tell are not due to
 problems in this patch series.  I'll continue working on this for
 future pull requests.  Specifically, 'travis', 'fedora', and 'centos6'
 seem to work.  'min-glib' jammed while gtesting moxie, which seems
 very unlikely to be caused by this series.  'ubuntu', 'debian' and
 'debian-bootstrap' hit build errors almost immediately that look like
 problems with the container configuration, and 'debian-*-cross' hit
 build errors later on which also look like missing dependencies from
 the container.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZE+T6AAoJEGw4ysog2bOSgSYQAMszDZ+HCYlp6iVlJqDoy55S
 u8krYwkS9MnzrmbMjPVzGiFmH6IEuOd3zAx0aM1wZtcXjprUKsr6jHZOEtk7Frv5
 vzIwzcP85vkVegPX+fNUAo+1+T3OHix9RAI3BF5rHdyCC2OmJriPyvyOQ76uVORJ
 9ouSAeG/dCyjkVRYAlTQPidGqc/OQUaMFwZdLvhTJHeDqcdlqziCzP1YnDjN78UQ
 BRpsYOYFnGSzaqjNj16edF/yM4NiW/4tLd700mvGkvPUHrFEiyQur0Lm0bc1iZs5
 JZwcgAxhivI6CiWt57y/OpC6pWsasVhlBY00aWBcEExAh6j+Kp20g0C6MYB4JdwX
 jVJUOzWGWuMFkS65S/nHmdngUWvrSpn1xzPr0KQihLRFpoYK3btaS2TcekQocnZc
 mF3NFvKXeS/F6ZYLDWkLF/9VVEjz2mJNRvimhMWljuFyLmxlQxQSvzNXZ7Lt/maj
 D4nFaOWf5eG0O0Em54hLizM6r6vnt2qkLVSjPmOFO2gQvDsu10G/5ociqkYNRYvz
 srJUfo2xMjzaM0lvJTJT3VOWfbX1Wq4A8zyjLuoi1xpqI1Yb95zEycFvc0Eszzh1
 OByIuHLNynu+W2w08dAA8vU1tlh+Yf0yld2LOgY3Cn2gjgHQRFtmyrIsPgYsptC1
 63Y0PbTnGdbaEdlAJu8I
 =D0Hk
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'dgibson/tags/ppc-for-2.10-20170511' into staging

ppc patch queue for 2017-05-11

This pull request supersedes the one from yesterday (20170510), fixing
an important style bug in one patch, and adding an extra couple of
simple patches.

Highlights of this set:
  * Some fixes for POWER9
  * TCG support for POWER9 radix MMU
  * VGA rom for Mac machine types
  * Fixes for the XICS interrupt controller
  * MTTCG support for ppc targets

As suggested by Paolo, I've tried to add the Docker tests to my
standard pre-pull-request tests.  I haven't wholly suceeded; this has
been tested with some of the Docker images, but others I haven't
managed due to problems that as best I can tell are not due to
problems in this patch series.  I'll continue working on this for
future pull requests.  Specifically, 'travis', 'fedora', and 'centos6'
seem to work.  'min-glib' jammed while gtesting moxie, which seems
very unlikely to be caused by this series.  'ubuntu', 'debian' and
'debian-bootstrap' hit build errors almost immediately that look like
problems with the container configuration, and 'debian-*-cross' hit
build errors later on which also look like missing dependencies from
the container.

# gpg: Signature made Thu 11 May 2017 05:13:46 AM BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* dgibson/tags/ppc-for-2.10-20170511: (23 commits)
  target/ppc: Avoid printing wrong aliases in CPU help text
  pnv: Fix build failures on some host platforms
  target/ppc: Allow workarounds for POWER9 DD1
  spapr: Don't accidentally advertise HTM support on POWER9
  ppc: xics: fix compilation with CentOS 6
  target/ppc: Enable RADIX mmu mode for pseries TCG guest
  target/ppc: Implement ISA V3.00 radix page fault handler
  target/ppc: Change tlbie invalid fields for POWER9 support
  target/ppc: Update tlbie to check privilege level based on GTSE
  target/ppc: Set UPRT and GTSE on all cpus in H_REGISTER_PROCESS_TABLE
  ppc: add qemu_vga.ndrv ROM to fw_cfg interface for NewWorld Macs
  ppc: add qemu_vga.ndrv ROM to fw_cfg interface for OldWorld Macs
  Add QemuMacDrivers qemu_vga.ndrv revision d4e7d7a built as submodule
  Add QemuMacDrivers as submodule
  ppc/xics: preserve P and Q bits for KVM IRQs
  ppc/xics: Fix stale irq->status bits after get
  target/ppc: do not reset reserve_addr in exec_enter
  tcg: enable MTTCG by default for PPC64 on x86
  cpus: Fix CPU unplug for MTTCG
  target/ppc: Generate fence operations
  ...

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-15 14:00:15 +01:00
Daniel P. Berrange
33c53c54e4 coroutine: remove GThread implementation
The GThread implementation is not functional enough to actually
run QEMU reliably. While it was potentially useful for debugging,
we have a scripts/qemugdb/coroutine.py to enable tracing of
ucontext coroutines in GDB, so that removes the only reason for
GThread to exist.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-12 10:36:46 -04:00
Nikunj A Dadhania
f0b0685d66 tcg: enable MTTCG by default for PPC64 on x86
This enables the multi-threaded system emulation by default for PPC64
guests using the x86_64 TCG back-end.

Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-11 09:45:15 +10:00
Andreas Grapentin
49e00a1870 use _Static_assert in QEMU_BUILD_BUG_ON
QEMU_BUILD_BUG_ON should use C11's _Static_assert, if the compiler supports it,
to provide more readable messages on failure.

We check for _Static_assert in configure, and set CONFIG_STATIC_ASSERT
accordingly. QEMU_BUILD_BUG_ON invokes _Static_assert if CONFIG_STATIC_ASSERT
is defined, and reverts to the old way otherwise.

That way, systems without C11 conforming compiler will still have the old
messages, as verified by intentionally breaking the configure check.

the following example output was generated by inverting the condition in
QEMU_BUILD_BUG_ON:

without _Static_assert:

> In file included from /qemu/include/qemu/osdep.h:36:0,
>                  from /qemu/qga/commands.c:13:
> /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’:
> /qemu/include/qemu/compiler.h:89:12: error: negative width in bit-field ‘<anonymous>’
>      struct { \
>             ^
> /qemu/include/qemu/compiler.h:96:38: note: in expansion of macro  QEMU_BUILD_BUG_ON_STRUCT’
>  #define QEMU_BUILD_BUG_ON(x) typedef QEMU_BUILD_BUG_ON_STRUCT(x) \
>                                       ^~~~~~~~~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’
>      QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *));   \
>      ^~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’
>      atomic_load_acquire(ptr)
>      ^~~~~~~~~~~~~~~~~~~
> /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’
>      bool finished = atomic_mb_read(&gei->finished);
>                      ^~~~~~~~~~~~~~

with _Static_assert:

> In file included from /qemu/include/qemu/osdep.h:36:0,
>                  from /qemu/qga/commands.c:13:
> /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’:
> /qemu/include/qemu/compiler.h:94:30: error: static assertion failed: "not expecting: sizeof(*&gei->finished) > sizeof(void *)"
>  #define QEMU_BUILD_BUG_ON(x) _Static_assert((x), #x)
>                               ^
> /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’
>      QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *));   \
>      ^~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’
>      atomic_load_acquire(ptr)
>      ^~~~~~~~~~~~~~~~~~~
> /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’
>      bool finished = atomic_mb_read(&gei->finished);
>                      ^~~~~~~~~~~~~~

Signed-off-by: Andreas Grapentin <andreas@grapentin.org>
Message-Id: <20170314165953.18506-1-andreas@grapentin.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05 12:09:59 +02:00
Abdallah Bouassida
00fcd100c3 target/i386: Add GDB XML register description support
This patch implements XML target description support for X86 and X86-64
architectures in the GDB stub, as the way with ARM and PowerPC:
- gdb-xml/32bit-core.xml & gdb-xml/64bit-core.xml: Adding the XML target
  description files, these files are picked from GDB source code.
- configure: Define gdb_xml_files for X86 targets.
- target/i386/cpu.c: Define gdb_core_xml_file and gdb_arch_name to add
  XML awareness for this architecture, modify the gdb_num_core_regs to
  fit the registers number defined in each XML file.

Signed-off-by: Abdallah Bouassida <abdallah.bouassida@lauterbach.com>
Message-Id: <2b3c8119-1602-28c7-eab4-296593877103@lauterbach.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-05 12:09:59 +02:00
Greg Kurz
64a6047d54 configure: fix trace backend list for out-of-tree builds
Since commit "c53eeaf75a04 configure: eliminate Python dependency for
--help", configure --help fails to produce the list of available trace
backends if invoked out-of-tree. It also spits the following error:

grep: scripts/tracetool/backend/*.py: No such file or directory

This patch simply adds the missing $source_path to fix it.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-id: 149321376763.7874.12797658801011614451.stgit@bahia
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-04-28 16:49:41 +01:00
Vinzenz Feenstra
161a56a906 qga: Add 'guest-get-users' command
A command that will list all currently logged in users, and the time
since when they are logged in.

Examples:

virsh # qemu-agent-command F25 '{ "execute": "guest-get-users" }'
{"return":[{"login-time":1490622289.903835,"user":"root"}]}

virsh # qemu-agent-command Win2k12r2 '{ "execute": "guest-get-users" }'
{"return":[{"login-time":1490351044.670552,"domain":"LADIDA",
"user":"Administrator"}]}

Signed-off-by: Vinzenz Feenstra <vfeenstr@redhat.com>
* make g_hash_table_contains compat func inline to avoid
  unused warnings
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-04-26 23:57:45 -05:00
Peter Maydell
52e94ea5de Xen 2017/04/21 + fix
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJY/5EdAAoJEIlPj0hw4a6QHj8P/1D3iZq8vKyLvnkioYC00ao8
 dhuCFV1Dk0dl/QXvDXxNAHFqmHp2PzHeHF2V19bTbUh9QnY3WH9aSsMQ7YVPDzLb
 6ZezbxXd1l8+IOrWh+ch+x6jiUpRAeHGjhSpFxQEmH5THBmPtLHBFhAeeGpVq6CT
 MPFlN0mr1snyMMbK2aKCVTHgh5Wip83/t/kijIq4RmPwXdJbwxx55PL8jxC/NZHq
 /NbAZzAT149fmItfBNnsRTfNoDs7fSmgM9VelYsnJNHs6qkYYfewxys4vudePG8n
 ZcjCXMv9vdCSTfXfYY9nxhfGCgkkRSvBWrzARRIUPxTXGAmEU52LJrccpG9AEFRZ
 Kgz1JYr0y+u/g+RsCJvAglvmciawXgZH8GIR4sFl2iv4u6cx8PxNRgjTdt7YX4Je
 V7+scmOLB0U5wkI7PUcPV1v2fwKJHFfMdyik257otfMCJiTCnWGJfCZGR4JAdy3C
 NHuG4eIj2XLjZ7IQIo3mg+EfdCWdfVMKtXj0MAFsP6Kcr6sY/ef5sx/wB61k3NU1
 Y4ctI/LAOONsjlC2yzJ4aZR4LgyFcVcwx8FKOK7niCcCgVLYGWpyiHU3kFKYlmKM
 FKIlGPPOK8WuRV9NUGDI9A8XENyFXGyiR2xGCotfgHj+FSSqRzhKH4ecfgNimJVY
 wjTzZmBa68pLHdXaJ+SV
 =OfeB
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20170421-v2-tag' into staging

Xen 2017/04/21 + fix

# gpg: Signature made Tue 25 Apr 2017 19:10:37 BST
# gpg:                using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# gpg:                 aka "Stefano Stabellini <sstabellini@kernel.org>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3  0AEA 894F 8F48 70E1 AE90

* remotes/sstabellini/tags/xen-20170421-v2-tag: (21 commits)
  move xen-mapcache.c to hw/i386/xen/
  move xen-hvm.c to hw/i386/xen/
  move xen-common.c to hw/xen/
  add xen-9p-backend to MAINTAINERS under Xen
  xen/9pfs: build and register Xen 9pfs backend
  xen/9pfs: send responses back to the frontend
  xen/9pfs: implement in/out_iov_from_pdu and vmarshal/vunmarshal
  xen/9pfs: receive requests from the frontend
  xen/9pfs: connect to the frontend
  xen/9pfs: introduce Xen 9pfs backend
  9p: introduce a type for the 9p header
  xen: import ring.h from xen
  configure: use pkg-config for obtaining xen version
  xen: additionally restrict xenforeignmemory operations
  xen: use libxendevice model to restrict operations
  xen: use 5 digit xen versions
  xen: use libxendevicemodel when available
  configure: detect presence of libxendevicemodel
  xen: create wrappers for all other uses of xc_hvm_XXX() functions
  xen: rename xen_modified_memory() to xen_hvm_modified_memory()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-26 10:22:31 +01:00
Ashish Mittal
da92c3ff60 block/vxhs.c: Add support for a new block device type called "vxhs"
Source code for the qnio library that this code loads can be downloaded from:
https://github.com/VeritasHyperScale/libqnio.git

Sample command line using JSON syntax:
./x86_64-softmmu/qemu-system-x86_64 -name instance-00000008 -S -vnc 0.0.0.0:0
-k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
-msg timestamp=on
'json:{"driver":"vxhs","vdisk-id":"c3e9095a-a5ee-4dce-afeb-2a59fb387410",
"server":{"host":"172.172.17.4","port":"9999"}}'

Sample command line using URI syntax:
qemu-img convert -f raw -O raw -n
/var/lib/nova/instances/_base/0c5eacd5ebea5ed914b6a3e7b18f1ce734c386ad
vxhs://192.168.0.1:9999/c6718f6b-0401-441d-a8c3-1f0064d75ee0

Sample command line using TLS credentials (run in secure mode):
./qemu-io --object
tls-creds-x509,id=tls0,dir=/etc/pki/qemu/vxhs,endpoint=client -c 'read
-v 66000 2.5k' 'json:{"server.host": "127.0.0.1", "server.port": "9999",
"vdisk-id": "/test.raw", "driver": "vxhs", "tls-creds":"tls0"}'

[Jeff: Modified trace-events with the correct string formatting]

Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 1491277689-24949-2-git-send-email-Ashish.Mittal@veritas.com
2017-04-24 15:08:42 -04:00
Juergen Gross
c1cdd9d5be configure: use pkg-config for obtaining xen version
Instead of trying to guess the Xen version to use by compiling various
test programs first just ask the system via pkg-config. Only if it
can't return the version fall back to the test program scheme.

If configure is being called with dedicated flags for the Xen libraries
use those instead of the pkg-config output. This will avoid breaking
an in-tree Xen build of an old Xen version while a new Xen version is
installed on the build machine: pkg-config would pick up the installed
Xen config files as the Xen tree wouldn't contain any of them.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-04-21 12:41:23 -07:00
Juergen Gross
f1167ee684 xen: use 5 digit xen versions
Today qemu is using e.g. the value 480 for Xen version 4.8.0. As some
Xen version tests are using ">" relations this scheme will lead to
problems when Xen version 4.10.0 is being reached.

Instead of the 3 digit schem use a 5 digit scheme (e.g. 40800 for
version 4.8.0).

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-04-21 12:40:09 -07:00
Paul Durrant
da8090ccb7 configure: detect presence of libxendevicemodel
This patch adds code in configure to set CONFIG_XEN_CTRL_INTERFACE_VERSION
to a new value of 490 if libxendevicemodel is present in the build
environment.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-04-21 12:39:36 -07:00
Stefan Hajnoczi
c53eeaf75a configure: eliminate Python dependency for --help
The ./configure script should produce --help output even if Python is
not installed.

Listing trace backends is simple: show the names of all Python modules
in scripts/tracetool/backend/ whose source code contains 'PUBLIC =
True'.

Perform the backend enumeration in shell instead of Python so that we
can move the Python check until after ./configure --help.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170328134418.3426-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-04-21 10:45:34 +01:00