USB frame rate is slightly lower than 1kHz: ie. ~950Hz.
Thus usb-audio device is not able to perform a simple audio playback
without underruns on audio backend.
eg. "-device pci-ohci,id=ohci -device usb-audio,bus=ohci.0" vs PulseAudio
backend. more than 50 underruns are observed per second.
Update ohci_sof_time computation, using QEMU_CLOCK_VIRTUAL in
ohci_usb_start(), and increment by usb_frame_time in ohci_sof()
makes USB frame rate close to 1kHz.
This way, no audio underrun are observed during audio playback.
Signed-off-by: Miguel GAIO <mgaio35@gmail.com>
Message-Id: <20180927151936.3647-1-mgaio35@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Stale values in this field may result in qemu
expecting more data on the next operation
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180907220851.9658-4-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Return STORE_FULL if we can't write all the bytes but
return incomplete transfer if data received is less then
what was specified in the metadata. Also, use d->offset
as the file size which is valid for all file sizes.
Signed-off-by: Bandan <bsd@redhat.com>
Message-id: 20180907220851.9658-2-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes for external clients; add reminder to revisit naming of x- command
- Vladimir Sementsov-Ogievskiy: nbd/server: send more than one extent of base:allocation context
- John Snow: qapi: bitmap-merge: document name change
- Vladimir Sementsov-Ogievskiy: nbd/server: fix bitmap export
-----BEGIN PGP SIGNATURE-----
Comment: Public key at http://people.redhat.com/eblake/eblake.gpg
iQEcBAABCAAGBQJbrEMDAAoJEKeha0olJ0NqVUMIAIsPETUWAbMbulGYqO9Q4HDz
VCAJDYWW8QbxIngO1pXrfno7+VGfs6jN5H2FIc8fTQNh4hFQkDYTSn0PBoGQQifH
BcS9aevHADGOqgx1E/i0trBBtSagrYcig5ZbPQnm3gNO0u7c2Mwrddy550QQDGI2
LT+0ta1lbDRxiMZXkTg7HB2Q3iYjZHdweLLJdGSpalYyXN95A5H2RsyCALA6Y0oS
+lrYEoNyGqSNhgqVe/kRgvz4t9CsJ3fam/Y7JVmL/s43WvkdODpaEcEDiZRosQuo
NbC+kD3t5qvElkPZUS4yqMXmjVCJpzW8ijLh3H1CSBwLjB4b2tLAEi83xeNQPRo=
=6Q7H
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-09-26' into staging
nbd patches for 2018-09-26
Fixes for external clients; add reminder to revisit naming of x- command
- Vladimir Sementsov-Ogievskiy: nbd/server: send more than one extent of base:allocation context
- John Snow: qapi: bitmap-merge: document name change
- Vladimir Sementsov-Ogievskiy: nbd/server: fix bitmap export
# gpg: Signature made Thu 27 Sep 2018 03:40:03 BST
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2018-09-26:
nbd/server: send more than one extent of base:allocation context
qapi: bitmap-merge: document name change
nbd/server: fix bitmap export
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This supercedes Juan's pull from the 13th
-----BEGIN PGP SIGNATURE-----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=JP00
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20180926a' into staging
Migration pull 2018-09-26
This supercedes Juan's pull from the 13th
# gpg: Signature made Wed 26 Sep 2018 18:07:30 BST
# gpg: using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20180926a:
migration/ram.c: Avoid taking address of fields in packed MultiFDInit_t struct
migration: fix the compression code
migration: fix QEMUFile leak
tests/migration: Speed up the test on ppc64
migration: cleanup in error paths in loadvm
migration/postcopy: Clear have_listen_thread
tests/migration: Add migration-test header file
tests/migration: Support cross compilation in generating boot header file
tests/migration: Convert x86 boot block compilation script into Makefile
migration: use save_page_use_compression in flush_compressed_data
migration: show the statistics of compression
migration: do not flush_compressed_data at the end of iteration
Add a hint message to loadvm and exits on failure
migration: handle the error condition properly
migration: fix calculating xbzrle_counters.cache_miss_rate
migration/rdma: Fix uninitialised rdma_return_path
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Monochrome cursors are still used by Windows guests with the
QXL-WDDM-DOD driver. Such cursor types have one odd feature, inversion
of colors. GDK does not seem to support it, so implement an alternative
solution: fill the inverted pixels and add an outline to make the cursor
more visible. Tested with the text cursor in Notepad and Windows 10.
cursor_set_mono is also used by the vmware GPU, so add a special check
to avoid breaking its 32bpp format (tested with Kubuntu 14.04.4). I was
unable to find a guest which supports the 1bpp format with a vmware GPU.
The old implementation was buggy and removed in v2.10.0-108-g79c5a10cdd
("qxl: drop mono cursor support"), this version improves upon that by
adding bounds validation, clarifying the semantics of the two masks and
adds a workaround for inverted colors support.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1611984
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Message-id: 20180903145447.17142-1-peter@lekensteyn.nl
[ kraxel: minor codestyle fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When processing monitor config from guest store head0 width and height
for single-head configurations. Use these when creating the
DisplaySurface in the local renderer.
This fixes a rendering issue with wayland. Wayland rounds up the
framebuffer width and height to a multiple of 64, so with odd
resolutions (800x600 for example) the framebuffer is larger than the
actual screen. The monitor config has the actual screen size though.
This fixes guest display for anything using the local renderer
(non-spice UI, screendump monitor command).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180919103057.9666-1-kraxel@redhat.com
This patch adds edid support to the qemu stdvga. It is turned off by
default and can be enabled with the new edid property. The patch also
adds xres and yres properties to specify the video mode you want the
guest use. Works only with edid enabled and updated guest driver.
The mmio bar of the stdvga has some unused address space at the start.
It was reserved just in case it'll be needed for virtio, but it turned
out to not be needed for that. So let's use that region to place the
EDID data block there.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-6-kraxel@redhat.com
Create a io region for an EDID data block.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180925075646.25114-4-kraxel@redhat.com
Helper function to figure the size of a edid blob, by checking how many
extensions are present. Both the base edid blob and the extensions are
128 bytes in size.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-3-kraxel@redhat.com
EDID is a metadata format to describe monitors. On physical hardware
the monitor has an eeprom with that data block which can be read over
i2c bus.
On a linux system you can usually find the EDID data block in
/sys/class/drm/$card/$connector/edid. xorg ships a edid-decode utility
which you can use to turn the blob into readable form.
I think it would be a good idea to use EDID for virtual displays too.
Needs changes in both qemu and guest kms drivers. This patch is the
first step, it adds an generator for EDID blobs to qemu. Comes with a
qemu-edid test tool included.
With EDID we can pass more information to the guest. Names and serial
numbers, so the guests display configuration has no boring "Unknown
Monitor". List of video modes. Display resolution, pretty important
in case we want add HiDPI support some day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-2-kraxel@redhat.com
This is necessary for efficient block-status export, for clients which
support it. (qemu is not yet such a client, but could become one.)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180704112302.471456-3-vsementsov@virtuozzo.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
We named these using underscores instead of the preferred dash,
document this nearby so we cannot possibly forget to rectify this
when we remove the 'x-' prefixes when the feature becomes stable.
We do not implement the change ahead of time to avoid more work
for libvirt to do in order to figure out how to use the beta version
of the API needlessly.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20180919190934.16284-1-jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: typo fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
Taking the address of a field in a packed struct is a bad idea, because
it might not be actually aligned enough for that pointer type (and
thus cause a crash on dereference on some host architectures). Newer
versions of clang warn about this:
migration/ram.c:651:19: warning: taking address of packed member 'magic' of class or structure 'MultiFDInit_t' may result in an unaligned pointer value [-Waddress-of-packed-member]
migration/ram.c:652:19: warning: taking address of packed member 'version' of class or structure 'MultiFDInit_t' may result in an unaligned pointer value [-Waddress-of-packed-member]
migration/ram.c:737:19: warning: taking address of packed member 'magic' of class or structure 'MultiFDPacket_t' may result in an unaligned pointer value [-Waddress-of-packed-member]
migration/ram.c:745:19: warning: taking address of packed member 'version' of class or structure 'MultiFDPacket_t' may result in an unaligned pointer value [-Waddress-of-packed-member]
migration/ram.c:755:19: warning: taking address of packed member 'size' of class or structure 'MultiFDPacket_t' may result in an unaligned pointer value [-Waddress-of-packed-member]
Avoid the bug by not using the "modify in place" byteswapping
functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180925161924.7832-1-peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add judgement in compress_threads_save_cleanup() to check whether the
static CompressParam *comp_param has been allocated. If not, just
return; or else segmentation fault will occur when using the NULL
comp_param's parameters. One test case can reproduce this is: set
the compression on and migrate to a wrong nonexistent host IP address.
Our current code does not judge before handling comp_param[idx]'s quit
and cond that whether they have been initialized. If not initialized,
"qemu_mutex_lock_impl: Assertion `mutex->initialized' failed." will
occur. Fix this by squashing the terminate_compression_threads() into
compress_threads_save_cleanup() and employing the existing judgement
condition. One test case can reproduce this error is: set the
compression on and fail to fully setup the default eight compression
thread in compress_threads_save_setup().
Signed-off-by: Fei Li <fli@suse.com>
Message-Id: <20180925091440.18910-1-fli@suse.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Spotted by ASAN while running:
$ tests/migration-test -p /x86_64/migration/postcopy/recovery
=================================================================
==18034==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 33864 byte(s) in 1 object(s) allocated from:
#0 0x7f3da7f31e50 in calloc (/lib64/libasan.so.5+0xeee50)
#1 0x7f3da644441d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5241d)
#2 0x55af9db15440 in qemu_fopen_channel_input /home/elmarco/src/qemu/migration/qemu-file-channel.c:183
#3 0x55af9db15413 in channel_get_output_return_path /home/elmarco/src/qemu/migration/qemu-file-channel.c:159
#4 0x55af9db0d4ac in qemu_file_get_return_path /home/elmarco/src/qemu/migration/qemu-file.c:78
#5 0x55af9dad5e4f in open_return_path_on_source /home/elmarco/src/qemu/migration/migration.c:2295
#6 0x55af9dadb3bf in migrate_fd_connect /home/elmarco/src/qemu/migration/migration.c:3111
#7 0x55af9dae1bf3 in migration_channel_connect /home/elmarco/src/qemu/migration/channel.c:91
#8 0x55af9daddeca in socket_outgoing_migration /home/elmarco/src/qemu/migration/socket.c:108
#9 0x55af9e13d3db in qio_task_complete /home/elmarco/src/qemu/io/task.c:158
#10 0x55af9e13ca03 in qio_task_thread_result /home/elmarco/src/qemu/io/task.c:89
#11 0x7f3da643b1ca in g_idle_dispatch gmain.c:5535
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180925092245.29565-1-marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The SLOF boot process is always quite slow ... but we can speed it up
a little bit by specifying "-nodefaults" and by using the "nvramrc"
variable instead of "boot-command" (since "nvramrc" is evaluated earlier
in the SLOF boot process than "boot-command").
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1537204330-16076-1-git-send-email-thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There's a couple of error paths in qemu_loadvm_state
which happen early on but after we've initialised the
load state; that needs to be cleaned up otherwise
we can hit asserts if the state gets reinitialised later.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180914170430.54271-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Clear have_listen_thread when we exit the thread.
The fallout from this was that various things thought there was
an ongoing postcopy after the postcopy had finished.
The case that failed was postcopy->savevm->loadvm.
This corresponds to RH bug https://bugzilla.redhat.com/show_bug.cgi?id=1608765
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180914170430.54271-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The TCG backend uses LOWREGMASK to get the low 3 bits of register numbers.
This was defined as no-op for 32-bit x86, with the assumption that we have
eight registers anyway. This assumption is not true once we have xmm regs.
Since LOWREGMASK was a no-op, xmm register indidices were wrong in opcodes
and have overflown into other opcode fields, wreaking havoc.
To trigger these problems, you can try running the "movi d8, #0x0" AArch64
instruction on 32-bit x86. "vpxor %xmm0, %xmm0, %xmm0" should be generated,
but instead TCG generated "vpxor %xmm0, %xmm0, %xmm2".
Fixes: 770c2fc7bb ("Add vector operations")
Signed-off-by: Roman Kapl <rka@sysgo.com>
Message-Id: <20180824131734.18557-1-rka@sysgo.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Precomputing the hash values allows us to perform more frequent
accesses to the hash table, thereby reaching higher throughputs.
We keep the old behaviour by default, since (1) we might confuse
users if they measured a speedup without changing anything in
the QHT implementation, and (2) benchmarking the hash function
"on line" is also valuable.
Before:
$ taskset -c 0 tests/qht-bench -n 1
Throughput: 38.18 MT/s
After:
$ taskset -c 0 tests/qht-bench -n 1
Throughput: 38.16 MT/s
After (with precomputing):
$ taskset -c 0 tests/qht-bench -n 1 -p
Throughput: 50.87 MT/s
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These functions do not modify their @ht or @bucket arguments.
Constify those arguments.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
seqlock_read_begin takes a const param since c04649eeea
("seqlock: constify seqlock_read_begin", 2018-08-23), so
we can constify the entire lookup.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Accessing the HT from an iterator results almost always
in a deadlock. Given that only one qht-internal function
uses this argument, drop it from the interface.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform first the tests that exercise code paths that are
easier to hit at small table sizes, and then resize the table
to speed up subsequent tests. If this resize is not too large,
we can make the test faster with no code coverage loss.
- With gcov enabled:
Before: 20.568s, 90.28% qht.c coverage
After: 5.168s, 93.06% qht.c coverage
The coverage increase is entirely due to calling qht_resize,
which we weren't calling before. Note that the code paths
that remain to be tested are either error handling or
can only occur when several threads are accessing the
hash table concurrently (e.g. seqlock retry, trylock fail).
- Without gcov:
Before: 1.987s
After: 0.528s
The speedup is almost the same as with gcov, although the
"before" run is a lot faster.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This improves coverage by one (!) LoC in qht.c, bringing the
coverage rate up from 90.00% to 90.28%.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This improves qht.c code coverage from 89.44% to 90.00%.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This currently has no users, but the use case is so common that I
think we must support it.
Note that without the appended we cannot safely remove a set of
elements; a 2-step approach (i.e. qht_iter first, keep track of
the to-be-deleted elements, and then a bunch of qht_remove calls)
would be racy, since between the iteration and the removals other
threads might insert additional elements.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
bitmap_to_extents function is broken: it switches dirty variable after
every iteration, however it can process only part of dirty (or zero)
area during one iteration in case when this area is too large for one
extent.
Fortunately, the bug doesn't produce wrong extent flags: it just inserts
a zero-length extent between sequential extents representing large dirty
(or zero) area. However, zero-length extents are forbidden by the NBD
protocol. So, a careful client should consider such a reply as a server
fault, while a less-careful will likely ignore zero-length extents.
The bug can only be triggered by a client that requests block status
for nearly 4G at once (a request of 4G and larger is impossible per
the protocol, and requests smaller than 4G less the bitmap granularity
cause the loop to quit iterating rather than revisit the tail of the
large area); it also cannot trigger if the client used the
NBD_CMD_FLAG_REQ_ONE flag. Since qemu 3.0 as client (using the
x-dirty-bitmap extension) always passes the flag, it is immune; and
we are not aware of other open-source clients that know how to request
qemu:dirty-bitmap:FOO contexts. Clients that want to avoid the bug
could cap block status requests to a smaller length, such as 2G or 3G.
Fix this by more careful handling of dirty variable.
Bug was introduced in 3d068aff16
"nbd/server: implement dirty bitmap export", with the whole function.
and is present in v3.0.0 release.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180914165116.23182-1-vsementsov@virtuozzo.com>
CC: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: improved commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
Remove -sandbox option if the host is not capable of TSYNC, since the
sandbox will fail at setup time otherwise. This will help libvirt, for
ex, to figure out if -sandbox will work.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
This patch moves the settings related migration-test from the
migration-test.c file to a new header file.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-Id: <1536174934-26022-4-git-send-email-wei@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Recently a new configure option, CROSS_CC_GUEST, was added to
$(TARGET)-softmmu/config-target.mak to support TCG-related tests. This
patch tries to leverage this option to support cross compilation when the
migration boot block file is being re-generated:
* The x86 related files are moved to a new sub-dir (named ./i386).
* A new top-layer Makefile is created in tests/migration/ directory.
This Makefile searches and parses CROSS_CC_GUEST to generate CROSS_PREFIX.
The CROSS_PREFIX, if available, is then passed to migration/$ARCH/Makefile.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-Id: <1536174934-26022-3-git-send-email-wei@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The x86 boot block header currently is generated with a shell script.
To better support other CPUs (e.g. aarch64), we convert the script
into Makefile. This allows us to 1) support cross-compilation easily,
and 2) avoid creating a script file for every architecture.
Note that, in the new design, the cross compiler prefix can be specified by
setting the CROSS_PREFIX in "make" command. Also to allow gcc pre-processor
to include the C-style file correctly, it also renames the
x86-a-b-bootblock.s file extension from .s to .S.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-Id: <1536174934-26022-2-git-send-email-wei@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It avoids to touch compression locks if xbzrle and compression
are both enabled
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20180906070101.27280-4-xiaoguangrong@tencent.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, it includes:
pages: amount of pages compressed and transferred to the target VM
busy: amount of count that no free thread to compress data
busy-rate: rate of thread busy
compressed-size: amount of bytes after compression
compression-rate: rate of compressed size
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180906070101.27280-3-xiaoguangrong@tencent.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
flush_compressed_data() needs to wait all compression threads to
finish their work, after that all threads are free until the
migration feeds new request to them, reducing its call can improve
the throughput and use CPU resource more effectively
We do not need to flush all threads at the end of iteration, the
data can be kept locally until the memory block is changed or
memory migration starts over in that case we will meet a dirtied
page which may still exists in compression threads's ring
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20180906070101.27280-2-xiaoguangrong@tencent.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch adds a small hint for the failure case of the load snapshot
process. It may be useful for users to remember that the VM
configuration has changed between the save and load processes.
(qemu) loadvm vm-20180903083641
Unknown savevm section or instance 'cpu_common' 4.
Make sure that your current VM setup matches your saved VM setup, including any hotplugged devices
Error -22 while loading VM state
(qemu) device_add host-spapr-cpu-core,core-id=4
(qemu) loadvm vm-20180903083641
(qemu) c
(qemu) info status
VM status: running
It also exits Qemu if the snapshot cannot be loaded before reaching the
main loop (-loadvm in the command line).
$ qemu-system-ppc64 ... -loadvm vm-20180903083641
qemu-system-ppc64: Unknown savevm section or instance 'cpu_common' 4.
Make sure that your current VM setup matches your saved VM setup, including any hotplugged devices
qemu-system-ppc64: Error -22 while loading VM state
$
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.ibm.com>
Message-Id: <20180903162613.15877-1-joserz@linux.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
