Currently we have 2 types of vhost backends in QEMU: vhost kernel and
vhost-user. The above patch provides a generic device for vDPA purpose,
this vDPA device exposes to user space a non-vendor-specific configuration
interface for setting up a vhost HW accelerator, this patch set introduces
a third vhost backend called vhost-vdpa based on the vDPA interface.
Vhost-vdpa usage:
qemu-system-x86_64 -cpu host -enable-kvm \
......
-netdev type=vhost-vdpa,vhostdev=/dev/vhost-vdpa-id,id=vhost-vdpa0 \
-device virtio-net-pci,netdev=vhost-vdpa0,page-per-vq=on \
Signed-off-by: Lingshan zhu <lingshan.zhu@intel.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Cindy Lu <lulu@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200701145538.22333-14-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Coverity noticed commit 950c4e6c94 introduced a dereference before
null check in get_opt_value (CID1391003):
In get_opt_value: All paths that lead to this null pointer
comparison already dereference the pointer earlier (CWE-476)
We fixed this in commit 6e3ad3f0e31, but relaxed the check in commit
0c2f6e7ee99 because "No callers of get_opt_value() pass in a NULL
for the 'value' parameter".
Since this function is publicly exposed, it risks new users to do
the same error again. Avoid that documenting the 'value' argument
must not be NULL.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200629070858.19850-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
According to the comment, this definition of invalid encoding is given
by intel developer's manual, and doesn't comply with 680x0 FPU.
With m68k, the explicit integer bit can be zero in the case of:
- zeros (exp == 0, mantissa == 0)
- denormalized numbers (exp == 0, mantissa != 0)
- unnormalized numbers (exp != 0, exp < 0x7FFF)
- infinities (exp == 0x7FFF, mantissa == 0)
- not-a-numbers (exp == 0x7FFF, mantissa != 0)
For infinities and NaNs, the explicit integer bit can be either one or
zero.
The IEEE 754 standard does not define a zero integer bit. Such a number
is an unnormalized number. Hardware does not directly support
denormalized and unnormalized numbers, but implicitly supports them by
trapping them as unimplemented data types, allowing efficient conversion
in software.
See "M68000 FAMILY PROGRAMMER’S REFERENCE MANUAL",
"1.6 FLOATING-POINT DATA TYPES"
We will implement in the m68k TCG emulator the FP_UNIMP exception to
trap into the kernel to normalize the number. In case of linux-user,
the number will be normalized by QEMU.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200612140400.2130118-1-laurent@vivier.eu>
The prototypes of muls64/mulu64 in host-utils.h should match the
definitions in host-utils.c
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Message-Id: <20200701234344.91843-10-ljp@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Create the pcspk device early, so it exists at
machine type initialization time.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200702132525.6849-17-kraxel@redhat.com
Instead of creating and returning the pc speaker accept it as argument.
That allows to rework the initialization workflow in followup patches.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200702132525.6849-16-kraxel@redhat.com
Now that we pass pcms anyway, we don't need the no_vmport arg any more.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200702132525.6849-14-kraxel@redhat.com
Now that we pass pcms anyway, we don't need the has_pit arg any more.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200702132525.6849-13-kraxel@redhat.com
Need access to pcms for pcspk initialization.
Just preparation, no functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200702132525.6849-12-kraxel@redhat.com
Add helper function for -soundhw deprecation. It can replace the
simple init functions which just call {isa,pci}_create_simple()
with a hardcoded type. It also prints a deprecation message.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200702132525.6849-4-kraxel@redhat.com
Currently this field only set by qed and qcow2. But in fact, all
backing-supporting formats (parallels, qcow, qcow2, qed, vmdk) share
these semantics: on unallocated blocks, if there is no backing file they
just memset the buffer with zeroes.
So, document this behavior for .supports_backing and drop
.unallocated_blocks_are_zero
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-10-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The function has only one user: bdrv_co_block_status(). Inline it to
simplify reviewing of the following patches, which will finally drop
unallocated_blocks_are_zero field too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-3-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
blockdev-amend will be used similiar to blockdev-create
to allow on the fly changes of the structure of the format based block devices.
Current plan is to first support encryption keyslot management for luks
based formats (raw and embedded in qcow2)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200608094030.670121-12-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some options are only useful for creation
(or hard to be amended, like cluster size for qcow2), while some other
options are only useful for amend, like upcoming keyslot management
options for luks
Since currently only qcow2 supports amend, move all its options
to a common macro and then include it in each action option list.
In future it might be useful to remove some options which are
not supported anyway from amend list, which currently
cause an error message if amended.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-5-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
'force' option will be used for some unsafe amend operations.
This includes things like erasing last keyslot in luks based formats
(which destroys the data, unless the master key is backed up
by external means), but that _might_ be desired result.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-4-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will be used first to implement luks keyslot management.
block_crypto_amend_opts_init will be used to convert
qemu-img cmdline to QCryptoBlockAmendOptions
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200608094030.670121-2-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch implements functionality for strace argument printing for ioctls.
When running ioctls through qemu with "-strace", they get printed in format:
"ioctl(fd_num,0x*,0x*) = ret_value"
where the request code an the ioctl's third argument get printed in a hexadicemal
format. This patch changes that by enabling strace to print both the request code
name and the contents of the third argument. For example, when running ioctl
RTC_SET_TIME with "-strace", with changes from this patch, it gets printed in
this way:
"ioctl(3,RTC_SET_TIME,{12,13,15,20,10,119,0,0,0}) = 0"
In case of IOC_R type ioctls, the contents of the third argument get printed
after the return value, and the argument inside the ioctl call gets printed
as pointer in hexadecimal format. For example, when running RTC_RD_TIME with
"-strace", with changes from this patch, it gets printed in this way:
"ioctl(3,RTC_RD_TIME,0x40800374) = 0 ({22,9,13,11,5,120,0,0,0})"
In case of IOC_RW type ioctls, the contents of the third argument get printed
both inside the ioctl call and after the return value.
Implementation notes:
Functions "print_ioctl()" and "print_syscall_ret_ioctl()", that are defined
in "strace.c", are listed in file "strace.list" as "call" and "result"
value for ioctl. Structure definition "IOCTLEntry" as well as predefined
values for IOC_R, IOC_W and IOC_RW were cut and pasted from file "syscall.c"
to file "qemu.h" so that they can be used by these functions to print the
contents of the third ioctl argument. Also, the "static" identifier for array
"ioctl_entries[]" was removed and this array was declared as "extern" in "qemu.h"
so that it can also be used by these functions. To decode the structure type
of the ioctl third argument, function "thunk_print()" was defined in file
"thunk.c" and its definition is somewhat simillar to that of function
"thunk_convert()".
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200619124727.18080-3-filip.bozuta@syrmia.com>
[lv: fix close-bracket]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
* i.MX6UL EVK board: put PHYs in the correct places
* hw/arm/virt: Let the virtio-iommu bypass MSIs
* target/arm: kvm: Handle DABT with no valid ISS
* hw/arm/virt-acpi-build: Only expose flash on older machine types
* target/arm: Fix temp double-free in sve ldr/str
* hw/display/bcm2835_fb.c: Initialize all fields of struct
* hw/arm/spitz: Code cleanup to fix Coverity-detected memory leak
* Deprecate TileGX port
-----BEGIN PGP SIGNATURE-----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=vdip
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200703' into staging
target-arm queue:
* i.MX6UL EVK board: put PHYs in the correct places
* hw/arm/virt: Let the virtio-iommu bypass MSIs
* target/arm: kvm: Handle DABT with no valid ISS
* hw/arm/virt-acpi-build: Only expose flash on older machine types
* target/arm: Fix temp double-free in sve ldr/str
* hw/display/bcm2835_fb.c: Initialize all fields of struct
* hw/arm/spitz: Code cleanup to fix Coverity-detected memory leak
* Deprecate TileGX port
# gpg: Signature made Fri 03 Jul 2020 17:53:05 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200703: (34 commits)
Deprecate TileGX port
Replace uses of FROM_SSI_SLAVE() macro with QOM casts
hw/arm/spitz: Provide usual QOM macros for corgi-ssp and spitz-lcdtg
hw/arm/pxa2xx_pic: Use LOG_GUEST_ERROR for bad guest register accesses
hw/arm/spitz: Use LOG_GUEST_ERROR for bad guest register accesses
hw/gpio/zaurus.c: Use LOG_GUEST_ERROR for bad guest register accesses
hw/arm/spitz: Encapsulate misc GPIO handling in a device
hw/misc/max111x: Create header file for documentation, TYPE_ macros
hw/misc/max111x: Use GPIO lines rather than max111x_set_input()
hw/arm/spitz: Use max111x properties to set initial values
ssi: Add ssi_realize_and_unref()
hw/misc/max111x: Don't use vmstate_register()
hw/misc/max111x: provide QOM properties for setting initial values
hw/arm/spitz: Implement inbound GPIO lines for bit5 and power signals
hw/arm/spitz: Keep pointers to scp0, scp1 in SpitzMachineState
hw/arm/spitz: Keep pointers to MPU and SSI devices in SpitzMachineState
hw/arm/spitz: Create SpitzMachineClass abstract base class
hw/arm/spitz: Detabify
hw/display/bcm2835_fb.c: Initialize all fields of struct
target/arm: Fix temp double-free in sve ldr/str
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The FW_CFG_DATA_GENERATOR allows any object to produce
blob of data consumable by the fw_cfg device.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200623172726.21040-3-philmd@redhat.com>
On the host OS, various aspects of TLS operation are configurable.
In particular it is possible for the sysadmin to control the TLS
cipher/protocol algorithms that applications are permitted to use.
* Any given crypto library has a built-in default priority list
defined by the distro maintainer of the library package (or by
upstream).
* The "crypto-policies" RPM (or equivalent host OS package)
provides a config file such as "/etc/crypto-policies/config",
where the sysadmin can set a high level (library-independent)
policy.
The "update-crypto-policies --set" command (or equivalent) is
used to translate the global policy to individual library
representations, producing files such as
"/etc/crypto-policies/back-ends/*.config". The generated files,
if present, are loaded by the various crypto libraries to
override their own built-in defaults.
For example, the GNUTLS library may read
"/etc/crypto-policies/back-ends/gnutls.config".
* A management application (or the QEMU user) may overide the
system-wide crypto-policies config via their own config, if
they need to diverge from the former.
Thus the priority order is "QEMU user config" > "crypto-policies
system config" > "library built-in config".
Introduce the "tls-cipher-suites" object for exposing the ordered
list of permitted TLS cipher suites from the host side to the
guest firmware, via fw_cfg. The list is represented as an array
of bytes.
The priority at which the host-side policy is retrieved is given
by the "priority" property of the new object type. For example,
"priority=@SYSTEM" may be used to refer to
"/etc/crypto-policies/back-ends/gnutls.config" (given that QEMU
uses GNUTLS).
The firmware uses the IANA_TLS_CIPHER array for configuring
guest-side TLS, for example in UEFI HTTPS Boot.
[Description from Daniel P. Berrangé, edited by Laszlo Ersek.]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200623172726.21040-2-philmd@redhat.com>
The FROM_SSI_SLAVE() macro predates QOM and is used as a typesafe way
to cast from an SSISlave* to the instance struct of a subtype of
TYPE_SSI_SLAVE. Switch to using the QOM cast macros instead, which
have the same effect (by writing the QOM macros if the types were
previously missing them.)
(The FROM_SSI_SLAVE() macro allows the SSISlave member of the
subtype's struct to be anywhere as long as it is named "ssidev",
whereas a QOM cast macro insists that it is the first thing in the
subtype's struct. This is true for all the types we convert here.)
This removes all the uses of FROM_SSI_SLAVE() so we can delete the
definition.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-18-peter.maydell@linaro.org
Instead of using printf() for logging guest accesses to invalid
register offsets in the pxa2xx PIC device, use the usual
qemu_log_mask(LOG_GUEST_ERROR,...).
This was the only user of the REG_FMT macro in pxa.h, so we can
remove that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-16-peter.maydell@linaro.org
Instead of logging guest accesses to invalid register offsets in this
device using zaurus_printf() (which just prints to stderr), use the
usual qemu_log_mask(LOG_GUEST_ERROR,...).
Since this was the only use of the zaurus_printf() macro outside
spitz.c, we can move the definition of that macro from sharpsl.h
to spitz.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-14-peter.maydell@linaro.org
Create a header file for the hw/misc/max111x device, in the
usual modern style for QOM devices:
* definition of the TYPE_ constants and macros
* definition of the device's state struct so that it can
be embedded in other structs if desired
* documentation of the interface
This allows us to use TYPE_MAX_1111 in the spitz.c code rather
than the string "max1111".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628142429.17111-12-peter.maydell@linaro.org
The max111x ADC device model allows other code to set the level on
the 8 ADC inputs using the max111x_set_input() function. Replace
this with generic qdev GPIO inputs, which also allow inputs to be set
to arbitrary values.
Using GPIO lines will make it easier for board code to wire things
up, so that if device A wants to set the ADC input it doesn't need to
have a direct pointer to the max111x but can just set that value on
its output GPIO, which is then wired up by the board to the
appropriate max111x input.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-11-peter.maydell@linaro.org
Add an ssi_realize_and_unref(), for the benefit of callers
who want to be able to create an SSI device, set QOM properties
on it, and then do the realize-and-unref afterwards.
The API works on the same principle as the recently added
qdev_realize_and_undef(), sysbus_realize_and_undef(), etc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-9-peter.maydell@linaro.org
The flash device is exclusively for the host-controlled firmware, so
we should not expose it to the OS. Exposing it risks the OS messing
with it, which could break firmware runtime services and surprise the
OS when all its changes disappear after reboot.
As firmware needs the device and uses DT, we leave the device exposed
there. It's up to firmware to remove the nodes from DT before sending
it on to the OS. However, there's no need to force firmware to remove
tables from ACPI (which it doesn't know how to do anyway), so we
simply don't add the tables in the first place. But, as we've been
adding the tables for quite some time and don't want to change the
default hardware exposed to versioned machines, then we only stop
exposing the flash device tables for 5.1 and later machine types.
Suggested-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200629140938.17566-4-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At the moment the virtio-iommu translates MSI transactions.
This behavior is inherited from ARM SMMU. The virt machine
code knows where the guest MSI doorbells are so we can easily
declare those regions as VIRTIO_IOMMU_RESV_MEM_T_MSI. With that
setting the guest will not map MSIs through the IOMMU and those
transactions will be simply bypassed.
Depending on which MSI controller is in use (ITS or GICV2M),
we declare either:
- the ITS interrupt translation space (ITS_base + 0x10000),
containing the GITS_TRANSLATOR or
- The GICV2M single frame, containing the MSI_SETSP_NS register.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20200629070404.10969-6-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements the PROBE request. At the moment,
only THE RESV_MEM property is handled. The first goal is
to report iommu wide reserved regions such as the MSI regions
set by the machine code. On x86 this will be the IOAPIC MSI
region, [0xFEE00000 - 0xFEEFFFFF], on ARM this may be the ITS
doorbell.
In the future we may introduce per device reserved regions.
This will be useful when protecting host assigned devices
which may expose their own reserved regions
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200629070404.10969-3-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a new property defining a reserved region:
<low address>:<high address>:<type>.
This will be used to encode reserved IOVA regions.
For instance, in virtio-iommu use case, reserved IOVA regions
will be passed by the machine code to the virtio-iommu-pci
device (an array of those). The type of the reserved region
will match the virtio_iommu_probe_resv_mem subtype value:
- VIRTIO_IOMMU_RESV_MEM_T_RESERVED (0)
- VIRTIO_IOMMU_RESV_MEM_T_MSI (1)
on PC/Q35 machine, this will be used to inform the
virtio-iommu-pci device it should bypass the MSI region.
The reserved region will be: 0xfee00000:0xfeefffff:1.
On ARM, we can declare the ITS MSI doorbell as an MSI
region to prevent MSIs from being mapped on guest side.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200629070404.10969-2-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add properties to the i.MX6UL processor to be able to select a
particular PHY on the MDIO bus for each FEC device.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: ea1d604198b6b73ea6521676e45bacfc597aba53.1593296112.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need a solution to use an Ethernet PHY that is not the first device
on the MDIO bus (device 0 on MDIO bus).
As an example with the i.MX6UL the NXP SOC has 2 Ethernet devices but
only one MDIO bus on which the 2 related PHY are connected but at unique
addresses.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: a1a5c0e139d1c763194b8020573dcb6025daeefa.1593296112.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
real_dirty_pages becomes equal to total ram size after dirty log sync
in ram_init_bitmaps, the reason is that the bitmap of ramblock is
initialized to be all set, so old path counts them as "real dirty" at
beginning.
This causes wrong dirty rate and false positive throttling.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200622032037.31112-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch introduces set_config & get_config method which allows
vhost_net set/get the config to backend
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-13-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This patch introduces new VhostOps vhost_force_iommu callback
to force enable features bit VIRTIO_F_IOMMU_PLATFORM.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-11-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
use vhost_vq_get_addr callback to get the vq address from backend
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-10-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This patch introduces new VhostOps vhost_vq_get_addr_op callback to get
the vring addr from the backend
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-9-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This patch introduces new VhostOps vhost_dev_start callback which allows the
vhost_net set the start/stop status to backend
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-7-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This patch introduces queue_enabled() method which allows the
transport to implement its own way to report whether or not a queue is
enabled.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-4-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This is a small function that can get the peer
from given NetClientState and queue_index
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-2-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Let's auto-enable it also when maxmem is specified but no slots are
defined. This will result in us properly creating ACPI srat tables,
indicating the maximum possible PFN to the guest OS. Based on this, e.g.,
Linux will enable the swiotlb properly.
This avoids having to manually force the switolb on (swiotlb=force) in
Linux in case we're booting only using DMA memory (e.g., 2GB on x86-64),
and virtio-mem adds memory later on that really needs the swiotlb to be
used for DMA.
Let's take care of backwards compatibility if somebody has a setup that
specifies "maxram" without "slots".
Reported-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Sergio Lopez <slp@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: qemu-arm@nongnu.org <qemu-arm@nongnu.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-22-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The content of unplugged memory is undefined and should not be migrated,
ever. Exclude all unplugged memory during precopy using the precopy notifier
infrastructure introduced for free page hinting in virtio-balloon.
Unplugged memory is marked as "not dirty", meaning it won't be
considered for migration.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-21-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We want to send qapi events in case the size of a virtio-mem device
changes. This allows upper layers to always know how much memory is
actually currently consumed via a virtio-mem device.
Unfortuantely, we have to report the id of our proxy device. Let's provide
an easy way for our proxy device to register, so it can send the qapi
events. Piggy-backing on the notifier infrastructure (although we'll
only ever have one notifier registered) seems to be an easy way.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-17-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's add a proxy for virtio-mem, make it a memory device, and
pass-through the properties.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-12-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is the very basic/initial version of virtio-mem. An introduction to
virtio-mem can be found in the Linux kernel driver [1]. While it can be
used in the current state for hotplug of a smaller amount of memory, it
will heavily benefit from resizeable memory regions in the future.
Each virtio-mem device manages a memory region (provided via a memory
backend). After requested by the hypervisor ("requested-size"), the
guest can try to plug/unplug blocks of memory within that region, in order
to reach the requested size. Initially, and after a reboot, all memory is
unplugged (except in special cases - reboot during postcopy).
The guest may only try to plug/unplug blocks of memory within the usable
region size. The usable region size is a little bigger than the
requested size, to give the device driver some flexibility. The usable
region size will only grow, except on reboots or when all memory is
requested to get unplugged. The guest can never plug more memory than
requested. Unplugged memory will get zapped/discarded, similar to in a
balloon device.
The block size is variable, however, it is always chosen in a way such that
THP splits are avoided (e.g., 2MB). The state of each block
(plugged/unplugged) is tracked in a bitmap.
As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now
expose "VirtioMEMDeviceInfo" via "query-memory-devices".
--------------------------------------------------------------------------
There are two important follow-up items that are in the works:
1. Resizeable memory regions: Use resizeable allocations/RAM blocks to
grow/shrink along with the usable region size. This avoids creating
initially very big VMAs, RAM blocks, and KVM slots.
2. Protection of unplugged memory: Make sure the gust cannot actually
make use of unplugged memory.
Other follow-up items that are in the works:
1. Exclude unplugged memory during migration (via precopy notifier).
2. Handle remapping of memory.
3. Support for other architectures.
--------------------------------------------------------------------------
Example usage (virtio-mem-pci is introduced in follow-up patches):
Start QEMU with two virtio-mem devices (one per NUMA node):
$ qemu-system-x86_64 -m 4G,maxmem=20G \
-smp sockets=2,cores=2 \
-numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \
[...]
-object memory-backend-ram,id=mem0,size=8G \
-device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \
-object memory-backend-ram,id=mem1,size=8G \
-device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G
Query the configuration:
(qemu) info memory-devices
Memory device [virtio-mem]: "vm0"
memaddr: 0x140000000
node: 0
requested-size: 0
size: 0
max-size: 8589934592
block-size: 2097152
memdev: /objects/mem0
Memory device [virtio-mem]: "vm1"
memaddr: 0x340000000
node: 1
requested-size: 1073741824
size: 1073741824
max-size: 8589934592
block-size: 2097152
memdev: /objects/mem1
Add some memory to node 0:
(qemu) qom-set vm0 requested-size 500M
Remove some memory from node 1:
(qemu) qom-set vm1 requested-size 200M
Query the configuration again:
(qemu) info memory-devices
Memory device [virtio-mem]: "vm0"
memaddr: 0x140000000
node: 0
requested-size: 524288000
size: 524288000
max-size: 8589934592
block-size: 2097152
memdev: /objects/mem0
Memory device [virtio-mem]: "vm1"
memaddr: 0x340000000
node: 1
requested-size: 209715200
size: 209715200
max-size: 8589934592
block-size: 2097152
memdev: /objects/mem1
[1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-11-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
COLO will copy all memory in a RAM block, disable discarding of RAM.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-10-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The only remaining special case is postcopy. It cannot handle
concurrent discards yet, which would result in requesting already sent
pages from the source. Special-case it in virtio-balloon instead.
Introduce migration_in_incoming_postcopy(), to find out if incoming
postcopy is active.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-7-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VFIO is (except devices without a physical IOMMU or some mediated devices)
incompatible with discarding of RAM. The kernel will pin basically all VM
memory. Let's convert to ram_block_discard_disable(), which can now
fail, in contrast to qemu_balloon_inhibit().
Leave "x-balloon-allowed" named as it is for now.
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: Eric Farman <farman@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-4-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
