Firstly, _next_dirty_area is for scenarios when we may contiguously
search for next dirty area inside some limited region, so it is more
comfortable to specify "end" which should not be recalculated on each
iteration.
Secondly, let's add a possibility to limit resulting area size, not
limiting searching area. This will be used in NBD code in further
commit. (Note that now bdrv_dirty_bitmap_next_dirty_area is unused)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-8-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
We have bdrv_dirty_bitmap_next_zero, let's add corresponding
bdrv_dirty_bitmap_next_dirty, which is more comfortable to use than
bitmap iterators in some cases.
For test modify test_hbitmap_next_zero_check_range to check both
next_zero and next_dirty and add some new checks.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-7-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
We are going to introduce bdrv_dirty_bitmap_next_dirty so that same
variable may be used to store its return value and to be its parameter,
so it would int64_t.
Similarly, we are going to refactor hbitmap_next_dirty_area to use
hbitmap_next_dirty together with hbitmap_next_zero, therefore we want
hbitmap_next_zero parameter type to be int64_t too.
So, for convenience update all parameters of *_next_zero and
*_next_dirty_area to be int64_t.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-6-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
We document that for qcow2 persistent bitmaps, the name cannot exceed
1023 bytes. It is inconsistent if transient bitmaps do not have to
abide by the same limit, and it is unlikely that any existing client
even cares about using bitmap names this long. It's time to codify
that ALL bitmaps managed by qemu (whether persistent in qcow2 or not)
have a documented maximum length.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191114024635.11363-3-eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Firstly, no reason to optimize failure path. Then, function name is
ambiguous: it checks for readonly and similar things, but someone may
think that it will ignore normal bitmaps which was just unchanged, and
this is in bad relation with the fact that we should drop IN_USE flag
for unchanged bitmaps in the image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190927122355.7344-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
bdrv_dirty_bitmap_next is always used in same pattern. So, split it
into _next and _first, instead of combining two functions into one and
add FOR_EACH_DIRTY_BITMAP macro.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
mutex field is just a pointer to bs->dirty_bitmap_mutex, so no needs
to store it in BdrvDirtyBitmap when we have bs pointer in it (since
previous patch).
Drop mutex field. Constantly use bdrv_dirty_bitmaps_lock/unlock in
block/dirty-bitmap.c to make it more obvious that it's not per-bitmap
lock. Still, for simplicity, leave bdrv_dirty_bitmap_lock/unlock
functions as an external API.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-4-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add bs field to BdrvDirtyBitmap structure. Drop BlockDriverState
parameter from bitmap APIs where possible.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-3-vsementsov@virtuozzo.com
[Rebased on top of block-copy. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Drop meta bitmaps, as they are unused.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
qmp_block_dirty_bitmap_add and do_block_dirty_bitmap_remove do acquire
aio context since 0a6c86d024. But this is not enough: we also must
lock qcow2 mutex when access in-image metadata. Especially it concerns
freeing qcow2 clusters.
To achieve this, move qcow2_can_store_new_dirty_bitmap and
qcow2_remove_persistent_dirty_bitmap to coroutine context.
Since we work in coroutines in correct aio context, we don't need
context acquiring in blockdev.c anymore, drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920082543.23444-4-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
It's more comfortable to not deal with local_err.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920082543.23444-3-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
block/dirty-bitmap.c seems to be more appropriate for it and
bdrv_remove_persistent_dirty_bitmap already in it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920082543.23444-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
It is used to do transactional movement of the bitmap (which is
possible in conjunction with merge command). Transactional bitmap
movement is needed in scenarios with external snapshot, when we don't
want to leave copy of the bitmap in the base image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-3-jsnow@redhat.com
[Edited "since" version to 4.2 --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Add a public interface for get. While we're at it,
rename "bdrv_get_dirty_bitmap_locked" to "bdrv_dirty_bitmap_get_locked".
(There are more functions to rename to the bdrv_dirty_bitmap_VERB form,
but they will wait until the conclusion of this series.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
I'm surprised it didn't come up sooner, but sometimes we have a +busy
bitmap as a source. This is dangerous from the QMP API, but if we are
the owner that marked the bitmap busy, it's safe to merge it using it as
a read only source.
It is not safe in the general case to allow users to read from in-use
bitmaps, so create an internal variant that foregoes the safety
checking.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Add new optional parameter making possible to merge bitmaps from
different nodes. It is needed to maintain external snapshots during
incremental backup chain history.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190517152111.206494-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Commit a88b179f introduced the ability to set and query bitmap
persistence, but with an atypical spelling.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20190308205845.25734-1-eblake@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We didn't do any state checking on source bitmaps at all,
so this adds inconsistent and busy checks. readonly is
allowed, so you can still copy a readonly bitmap to a new
destination to use it for operations like drive-backup.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of checking against busy, inconsistent, or read only directly,
use a check function with permissions bits that let us streamline the
checks without reproducing them in many places.
Included in this patch are permissions changes that simply add the
inconsistent check to existing permissions call spots, without
addressing existing bugs.
In general, this means that busy+readonly checks become BDRV_BITMAP_DEFAULT,
which checks against all three conditions. busy-only checks become
BDRV_BITMAP_ALLOW_RO.
Notably, remove allows inconsistent bitmaps, so it doesn't follow the pattern.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Even though the status field is deprecated, we still have to support
it for a few more releases. Since this is a very new kind of bitmap
state, it makes sense for it to have its own status field.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add an inconsistent bit to dirty-bitmaps that allows us to report a bitmap as
persistent but potentially inconsistent, i.e. if we find bitmaps on a qcow2
that have been marked as "in use".
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190301191545.8728-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Simply move the big status enum comment block to above the status
function, and document it as being deprecated. The whole confusing
block can get deleted in three releases time.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
These mean the same thing now. Unify them and rename the merged call
bdrv_dirty_bitmap_busy to indicate semantically what we are describing,
as well as help disambiguate from the various _locked and _unlocked
versions of bitmap helpers that refer to mutex locks.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of implying a user_locked/busy status, make it explicit.
Now, bitmaps in use by migration, NBD or backup operations
are all treated the same way with the same code paths.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Currently, the enabled predicate means something like:
"the QAPI status of the bitmap is ACTIVE."
After this patch, it should mean exclusively:
"This bitmap is recording guest writes, and is allowed to do so."
In many places, this is how this predicate was already used.
Internal usages of the bitmap QPI can call user_locked to find out if
the bitmap is in use by an operation.
To accommodate this, modify the create_successor routine to now
explicitly disable the parent bitmap at creation time.
Justifications:
1. bdrv_dirty_bitmap_status suffers no change from the lack of
1:1 parity with the new predicates because of the order in which
the predicates are checked. This is now only for compatibility.
2. bdrv_set_dirty() is unchanged: pre-patch, it was skipping bitmaps that were
disabled or had a successor, while post-patch it is only skipping bitmaps
that are disabled. To accommodate this, create_successor now ensures that
any bitmap with a successor is explicitly disabled.
3. qcow2_store_persistent_dirty_bitmaps: No functional change. This function
cares only about the literal enabled bit, and makes no effort to check if
the bitmap is in-use or not. After this patch there are still no ways to
produce an enabled bitmap with a successor.
4. block_dirty_bitmap_enable_prepare
block_dirty_bitmap_disable_prepare
init_dirty_bitmap_migration
nbd_export_new
These functions care about the literal enabled bit,
and already check user_locked separately.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
bdrv_set_dirty_bitmap and bdrv_reset_dirty_bitmap are only used as an
internal API by the mirror and migration areas of our code. These
calls modify the bitmap, but do so at the behest of QEMU and not the
guest.
Presently, these bitmaps are always "enabled" anyway, but there's no
reason they have to be.
Modify these internal APIs to drop this assertion.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
"Frozen" was a good description a long time ago, but it isn't adequate now.
Rename the frozen predicate to has_successor to make the semantics of the
predicate more clear to outside callers.
In the process, remove some calls to frozen() that no longer semantically
make sense. For bdrv_enable_dirty_bitmap_locked and
bdrv_disable_dirty_bitmap_locked, it doesn't make sense to prohibit QEMU
internals from performing this action when we only wished to prohibit QMP
users from issuing these commands. All of the QMP API commands for bitmap
manipulation already check against user_locked() to prohibit these actions.
Several other assertions really want to check that the bitmap isn't in-use
by another operation -- use the bitmap_user_locked function for this instead,
which presently also checks for has_successor. This leaves some redundant
checks of has_successor through different helpers that are addressed in
forthcoming patches.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The current API allows us to report a single status, which we've defined as:
Frozen: has a successor, treated as qmp_locked, may or may not be enabled.
Locked: no successor, qmp_locked. may or may not be enabled.
Disabled: Not frozen or locked, disabled.
Active: Not frozen, locked, or disabled.
The problem is that both "Frozen" and "Locked" mean nearly the same thing,
and that both of them do not intuit whether they are recording guest writes
or not.
This patch deprecates that status field and introduces two orthogonal
properties instead to replace it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The meaning of the states has changed subtly over time,
this should bring the understanding more in-line with the
current, actual usages.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190202011048.12343-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Since qemu currently doesn't flush persistent bitmaps to disk until
shutdown (which might be MUCH later), it's useful if 'query-block'
at least shows WHICH bitmaps will (eventually) make it to persistent
storage. Update affected iotests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190204210512.27458-1-eblake@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This reverts commit a33fbb4f8b.
The functionality is unused.
Note: in addition to automatic revert, drop second parameter in
hbitmap_iter_next() call from hbitmap_next_dirty_area() too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This reverts commit 72d10a9421.
The function is unused now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The function alters bdrv_dirty_iter_next_area(), which is wrong and
less efficient (see further commit
"block/mirror: fix and improve do_sync_target_write" for description).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
When making a backup of a dirty bitmap (for transactions), we want to
restore that backup whether or not the bitmap is enabled.
It is perfectly valid to write into bitmaps that are disabled. It is
only illegitimate for the guest to have done so.
Remove this assertion.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20181221093529.23855-3-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch aims to bring the following behavior:
1. We don't load bitmaps, when started in inactive mode. It's the case
of incoming migration. In this case we wait for bitmaps migration
through migration channel (if 'dirty-bitmaps' capability is enabled) or
for invalidation (to load bitmaps from the image).
2. We don't remove persistent bitmaps on inactivation. Instead, we only
remove bitmaps after storing. This is the only way to restore bitmaps,
if we decided to resume source after [failed] migration with
'dirty-bitmaps' capability enabled (which means, that bitmaps were not
stored).
3. We load bitmaps on open and any invalidation, it's ok for all cases:
- normal open
- migration target invalidation with dirty-bitmaps capability
(bitmaps are migrating through migration channel, the are not
stored, so they should have IN_USE flag set and will be skipped
when loading. However, it would fail if bitmaps are read-only[1])
- migration target invalidation without dirty-bitmaps capability
(normal load of the bitmaps, if migrated with shared storage)
- source invalidation with dirty-bitmaps capability
(skip because IN_USE)
- source invalidation without dirty-bitmaps capability
(bitmaps were dropped, reload them)
[1]: to accurately handle this, migration of read-only bitmaps is
explicitly forbidden in this patch.
New mechanism for not storing bitmaps when migrate with dirty-bitmaps
capability is introduced: migration filed in BdrvDirtyBitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Similarly to merge, it's OK to allow clear operations on disabled
bitmaps, as this condition only means that they are not recording
new writes. We are free to clear it if the user requests it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002230218.13949-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In prior commits that made merge transactionable, we removed the
assertion that merge cannot operate on disabled bitmaps. In addition,
we want to make sure that we are prohibiting merges to "locked" bitmaps.
Use the new user_locked function to check.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181002230218.13949-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Instead of both frozen and qmp_locked checks, wrap it into one check.
frozen implies the bitmap is split in two (for backup), and shouldn't
be modified. qmp_locked implies it's being used by another operation,
like being exported over NBD. In both cases it means we shouldn't allow
the user to modify it in any meaningful way.
Replace any usages where we check both frozen and qmp_locked with the
new check.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20181002230218.13949-2-jsnow@redhat.com
[w/edits Suggested-By: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>]
Signed-off-by: John Snow <jsnow@redhat.com>
Add backup parameter to bdrv_merge_dirty_bitmap() to be used then with
bdrv_restore_dirty_bitmap() if it needed to restore the bitmap after
merge operation.
This is needed to implement bitmap merge transaction action in further
commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Use more generic names to reuse the function for bitmap merge in the
following commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Move checks from qmp_x_block_dirty_bitmap_merge() to
bdrv_merge_dirty_bitmap(), to share them with dirty bitmap merge
transaction action in future commit.
Note: for now, only qmp_x_block_dirty_bitmap_merge() calls
bdrv_merge_dirty_bitmap().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Bitmap lock/unlock were added to bdrv_enable_dirty_bitmap in
8b1402ce80, but some places were not updated correspondingly, which
leads to trying to take this lock twice, which is dead-lock. Fix this.
Actually, iotest 199 (about dirty bitmap postcopy migration) is broken
now, and this fixes it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180625165745.25259-3-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add _locked version of bdrv_enable_dirty_bitmap, to fix dirty bitmap
migration in the following patch.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180625165745.25259-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
This new function allows to look for a consecutively dirty area in a
dirty bitmap.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180613181823.13618-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This new parameter allows the caller to just query the next dirty
position without moving the iterator.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180613181823.13618-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add locks and remove comments about BQL accordingly to
dirty_bitmap_mutex definition in block_int.h.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
QLIST_REMOVE does not require walking the list, and once the "bitmap"
argument is removed from bdrv_do_release_matching_dirty_bitmap_locked
the code simplifies a lot and it is worth inlining everything in the
callers of bdrv_do_release_matching_dirty_bitmap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180326104037.6894-1-pbonzini@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
