This patch implements record and replay of character devices.
It records chardevs communication in replay mode. Recorded information
include data read from backend and counter of bytes written
from frontend to backend to preserve frontend internal state.
If character device was configured through the command line in record mode,
then in replay mode it should be also added to command line. Backend of
the character device could be changed in replay mode.
Replaying of devices that perform ioctl and get_msgfd operations is not
supported.
gdbstub which also acts as a backend is not recorded to allow controlling
the replaying through gdb. Monitor backends are also not recorded.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160314074436.4980.83856.stgit@PASHA-ISP>
[Add stubs. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After reporting an error, ram_block_add was going on with the registration
of the RAMBlock. The visible effect is that it unlocked the ramlist
mutex twice.
Fixes: 528f46af6e
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
gethugepagesize() works reliably only when its argument is on
hugetlbfs. When it's not, it returns the filesystem's "optimal
transfer block size", which may or may not be the actual page size
you'll get when you mmap().
If the value is too small or not a power of two, we fail
qemu_ram_mmap()'s assertions. These were added in commit 794e8f3
(v2.5.0). The bug's impact before that is currently unknown. Seems
fairly unlikely at least when the normal page size is 4KiB.
Else, if the value is too large, we align more strictly than
necessary.
gethugepagesize() goes back to commit c902760 (v0.13). That commit
clearly intended gethugepagesize() to be used on hugetlbfs only. Not
only was it named accordingly, it also printed a warning when used on
anything else. However, the commit neglected to spell out the
restriction in user documentation of -mem-path.
Commit bfc2a1a (v2.5.0) dropped the warning as bogus "because QEMU
functions perfectly well with the path on a regular tmpfs filesystem".
It sure does when you're sufficiently lucky. In my testing, I was
lucky, too.
Fix by switching to qemu_fd_getpagesize(). Rename the variable
holding its result from hpagesize to page_size.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1457378754-21649-3-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 8d31d6b extended file_ram_alloc() to accept file names in
addition to directory names. Even though it passes O_CREAT to open(),
it actually works only for existing files. Reproducer adapted from
the commit's qemu-doc.texi update:
$ qemu-system-x86_64 -object memory-backend-file,size=2M,mem-path=/dev/hugepages/my-shmem-file,id=mb1
qemu-system-x86_64: -object memory-backend-file,size=2M,mem-path=/dev/hugepages/my-shmem-file,id=mb1: failed to get page size of file /dev/hugepages/my-shmem-file: No such file or directory
This is because we first get the page size for @path, then open the
actual file. Unwise even before the flawed commit, because the
directory could change in between, invalidating the page size.
Unlikely to bite in practice.
Rearrange the code to create the file (if necessary) before getting
its page size. Carefully avoid TOCTTOU conditions with a method
suggested by Paolo Bonzini.
While there, replace "hugepages" by "guest RAM" in error messages,
because host memory backends can be used for purposes other than huge
pages, e.g. /dev/shm/ shared memory. Help text of -mem-path agrees.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1457378754-21649-2-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
userfailtfd.h is used by post-copy migration so include it to
the update-linux-headers.sh as we want it updated altogether with
other kernel headers.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <1455512381-15271-1-git-send-email-aik@ozlabs.ru>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The split IRQ chip mode via KVM_CAP_SPLIT_IRQCHIP was introduced with commit
15eafc2e60 but was broken for q35. This patch makes kernel_irqchip=split
functional for q35.
Signed-off-by: Rita Sinha <rita.sinha89@gmail.com>
Message-Id: <1457378525-16455-1-git-send-email-rita.sinha89@gmail.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nvdimm work
sparse cpu id rework
ipmi enhancements
fixes all over the place
pxb option to tweak chassis number
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW6B0mAAoJECgfDbjSjVRpCtMH/2xSrYsLGAM3tQZtcAlpoof/
LNjN0GxTMXWtbDfGLKQMkexAmrDtBOqXTNfPpDaeycvktcMJ4wUCqX8nWC+cNwl+
3Uu4yiR9J5qjB4ANRlHnW45aL9rq7Qv0BBMQvc0AxpKMqZ9sf4okd2a4ZprTbhHq
/q/JnWKa/a4CGAZrfwlonobtT/YvF+cbq6gQOxUWMaemptEZDhYaH8PMtw0Ituw1
HWsI5lkhy+bHC2FeoqKt+p3ypuIXfnbg1rJyAiyVzgwz4289aMoh6nBll6WFRGpI
vEligkFv4GBjNlYloUaGLlJxz3RE/7uPGER2lSH0OYTSVNc1zUbvbmv/7DIucSA=
=0EjS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, virtio, pci, pc, acpi
nvdimm work
sparse cpu id rework
ipmi enhancements
fixes all over the place
pxb option to tweak chassis number
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Mar 2016 14:33:10 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (51 commits)
hw/acpi: fix GSI links UID
ipmi: add some local variables in ipmi_sdr_init
ipmi: remove the need of an ending record in the SDR table
ipmi: use a function to initialize the SDR table
ipmi: add a realize function to the device class
ipmi: add rsp_buffer_set_error() helper
ipmi: remove IPMI_CHECK_RESERVATION() macro
ipmi: replace IPMI_ADD_RSP_DATA() macro with inline helpers
ipmi: remove IPMI_CHECK_CMD_LEN() macro
MAINTAINERS: machine core
MAINTAINERS: Add an entry for virtio header files
pc: acpi: clarify why possible LAPIC entries must be present in MADT
pc: acpi: drop cpu->found_cpus bitmap
pc: acpi: create Processor and Notify objects only for valid lapics
pc: acpi: create MADT.lapic entries only for valid lapics
pc: acpi: SRAT: create only valid processor lapic entries
pc: acpi: cleanup qdev_get_machine() calls
machine: introduce MachineClass.possible_cpu_arch_ids() hook
pc: init pcms->apic_id_limit once and use it throughout pc.c
pc: acpi: remove NOP assignment
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to the ACPI spec, each UID must be unique.
Use the irq number as UID for GSI links.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of just checking for bind(), also check whether
getaddrinfo can resolve IPv6 addresses. This catches
failure when travis runs QEMU builds inside minimal
docker containers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=1WTP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 fixes
# gpg: Signature made Mon 14 Mar 2016 20:26:25 GMT using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
* remotes/ehabkost/tags/x86-pull-request:
kvm: Remove x2apic feature from CPU model when kernel_irqchip is off
hyperv: cpu hotplug fix with HyperV enabled
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=btIJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Mon 14 Mar 2016 16:36:52 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (40 commits)
iotests: Add test for QMP event rates
monitor: Use QEMU_CLOCK_VIRTUAL for the event queue in qtest mode
monitor: Separate QUORUM_REPORT_BAD events according to the node name
quorum: Fix crash in quorum_aio_cb()
iotests: Correct 081's reference output
block: Remove unused typedef of BlockDriverDirtyHandler
block: Move block dirty bitmap code to separate files
typedefs: Add BdrvDirtyBitmap
block: Include hbitmap.h in block.h
backup: Use Bitmap to replace "s->bitmap"
vpc: Use BB functions in .bdrv_create()
vmdk: Use BB functions in .bdrv_create()
vhdx: Use BB functions in .bdrv_create()
vdi: Use BB functions in .bdrv_create()
sheepdog: Use BB functions in .bdrv_create()
qed: Use BB functions in .bdrv_create()
qcow2: Use BB functions in .bdrv_create()
qcow: Use BB functions in .bdrv_create()
parallels: Use BB functions in .bdrv_create()
block: Introduce blk_set_allow_write_beyond_eof()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
x2apic feature is in the kvm_default_props and automatically added to all
CPU models when KVM is enabled. But userspace devices don't support x2apic
which can't be enabled without the in-kernel irqchip. It will trigger
warning of "host doesn't support requested feature: CPUID.01H:ECX.x2apic
[bit 21]" when kernel_irqchip is off. This patch is to fix it via removing
x2apic feature when kernel_irqchip is off.
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
With Hyper-V enabled CPU hotplug stops working. The CPU appears
in device manager on Windows but does not appear in peformance
monitor and control panel.
The root of the problem is the following. Windows checks
HV_X64_CPU_DYNAMIC_PARTITIONING_AVAILABLE bit in CPUID. The
presence of this bit is enough to cure the situation.
The bit should be set when CPU hotplug is allowed for HyperV VM.
The check that hot_add_cpu callback is defined is enough from the
protocol point of view. Though this callback is defined almost
always thus there is no need to export that knowledge in the
other way.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We discriminate here between opcodes that are illegal in the current
cpu mode or with illegal arguments (such as modrm.mod == 3) and
encodings that are unknown (such as an unimplemented isa extension).
Signed-off-by: Richard Henderson <rth@twiddle.net>
The patch in 7f0b714 was too simplistic, in that we wound up setting
the flag and then resetting it immediately in gen_eob.
Fixes the reported boot problem with Windows XP.
Reported-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
While ADDSEG will only be false in 16-bit mode for LEA, it can be
false even in other cases when 16-bit addresses are obtained via
the 67h prefix in 32-bit mode. In this case, gen_lea_v_seg forgets
to add a nonzero FS or GS base if CS/DS/ES/SS are all zero. This
case is pretty rare but happens when booting Windows 95/98, and
this patch fixes it.
The bug is visible since commit d6a291498, but it was introduced
together with gen_lea_v_seg and it probably could be reproduced
with a "addr16 gs movsb" instruction as early as in commit
ca2f29f555.
Reported-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1456931078-21635-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
In non-64-bit modes, the instruction always stores 16 bits.
But in 64-bit mode, when the destination is a register, the
instruction can write 32 or 64 bits.
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Two flags were tested the wrong way.
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1456845145-18891-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
[rth: Fixed enable test as well.]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW5uhRAAoJEDuxQgLoOKytsNoH/3cPTY1HAIXik9pOxU2leYvJ
E2cHjdyMWs9aJ3iXxqAjg8jD10s6C2ppgmH/d+xsIZl5SYLTu0WYWOFIzZ4n4W+6
m+CgxK4ChIZmYd3WY5XqjlkjQjtnTQtPl89nxibHBS6xMCkc59LcYbI2m2xR0UaD
iOkVj1t1uarW7usz2l4QGBKsqy+syV3TPy2DV71q04fAiF/g+WImTUfZr2u/zBiS
m8Q9UY0wEHmRLaNzzddzrYomCz4C99ULgUxssfHAoHShtj5lldrCrag2VNhNZRGx
c7KmnsdP+Q59zTOYbIxs3nXNoI6woQ/uPbTw9NWbJGa+tlbIHoqCiuxYeschmlg=
=ZR1k
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-03-14-v2' into queue-block
Block patches for pi day, v2.
# gpg: Signature made Mon Mar 14 17:35:29 2016 CET using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
* mreitz/tags/pull-block-for-kevin-2016-03-14-v2:
iotests: Add test for QMP event rates
monitor: Use QEMU_CLOCK_VIRTUAL for the event queue in qtest mode
monitor: Separate QUORUM_REPORT_BAD events according to the node name
quorum: Fix crash in quorum_aio_cb()
iotests: Correct 081's reference output
block: Remove unused typedef of BlockDriverDirtyHandler
block: Move block dirty bitmap code to separate files
typedefs: Add BdrvDirtyBitmap
block: Include hbitmap.h in block.h
backup: Use Bitmap to replace "s->bitmap"
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test verifies that the rate-limited QMP events are emitted at a
maximum rate of 1 per second as defined in monitor_qapi_event_conf in
monitor.c
It also checks that QUORUM_REPORT_BAD events generated from different
nodes are kept in separate queues so they don't mask each other.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 0dbd3ee88a59a6363042ad81cfb345037bfbf612.1457610443.git.berto@igalia.com
[mreitz@redhat.com: Renamed test from 146 to 148]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This allows us to perform tests on the monitor queues to verify that
the rate limits are enforced.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: dde511809e954a5c32d5b648bb184c03c89ed5d5.1457610443.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The QUORUM_REPORT_BAD event is emitted whenever there's an I/O error
in a child of a Quorum device. This event is emitted at a maximum rate
of 1 per second. This means that an error in one of the children will
mask errors in the other children if they happen within the same 1
second interval.
This patch modifies qapi_event_throttle_equal() so QUORUM_REPORT_BAD
events are kept separately if they come from different children.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: b989c0cb3755bc4b6696e796fa8ed2ef6c56606a.1457610443.git.berto@igalia.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
quorum_aio_cb() emits the QUORUM_REPORT_BAD event if there's
an I/O error in a Quorum child. However sacb->aiocb must be
correctly initialized for this to happen. read_quorum_children() and
read_fifo_child() are not doing this, which results in a QEMU crash.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 8138570d071ba7e25db3736979234a1fd71dbd05.1457610443.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The newly added type parameter for the QUORUM_REPORT_BAD event changed
the output of iotest 081, so the reference should be amended
accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 1457705687-27122-1-git-send-email-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
The only code change is making bdrv_dirty_bitmap_truncate public. It is
used in block.c.
Also two long lines (bdrv_get_dirty) are wrapped.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1457412306-18940-5-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Following patches to refactor and move block dirty bitmap code could use
this.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1457412306-18940-4-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
"s->bitmap" tracks done sectors, we only check bit states without using any
iterator which HBitmap is good for. Switch to "Bitmap" which is simpler and
more memory efficient.
Meanwhile, rename it to done_bitmap, to reflect the intention.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1457412306-18940-2-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJW5qAFAAoJEJykq7OBq3PIii0H/1u46qp77HP0NLp2NXSqKc/T
gdFXcI/yquclABMk0L79yxigC3KtpACHWSXmHkEnAAYIPJNfoez59Ol7U10gDP8k
NKL0avpPbukCzuenlkP0/uGDwS3c25+zWxd5eabhL9AapsnAKvJdhnzkbLT62gP7
cemrHwnXRkRmKKGeloAiJiKxZakM44yr05MMAI+Yt0bsKFxGwmM63ZAW8KESJBlE
CodIEROBSDcOusN3EkBE6zBnVEb7RVVROk3QmdFjLE8olDH7Pn5yfMzs5mmgJErt
CCy1sPPIqBeHnLOAo0HrUazF06HnIC6WXa86Xg/emcodaFuwFivRrcege2dkHEc=
=T7PV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 14 Mar 2016 11:27:01 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/tracing-pull-request:
trace: separate MMIO tracepoints from TB-access tracepoints
trace: include CPU index in trace_memory_region_*()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We check that the guest can't write beyond the end of its disk, but for
other internal users it can make sense to allow growing a file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we can use drive_add to create new nodes without a BB, we also
want to be able to delete such nodes again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This patch adds an option to the drive_add HMP command to create only a
BlockDriverState without a BlockBackend on top.
The motivation for this is that libvirt needs to specify options to a
migration target (specifically, detect-zeroes). drive-mirror doesn't
allow specifying options, and the proper way to do this is to create the
target BDS separately with blockdev-add (where you can specify options)
and then use blockdev-mirror to that BDS.
However, libvirt can't use blockdev-add as long as it is still
experimental, and we're expecting that it will still take some time, so
we need to resort to drive_add.
The problem with drive_add is that so far it always created a BB, and
BDSes with a BB can't be used as a mirroring target as long as we don't
support multiple BBs per BDS - and while we're working towards that
goal, it's another thing that will still take some time.
So to achieve the goal, the simplest solution to provide the
functionality now without adding one-off options to the mirror QMP
commands is to extend drive_add to create nodes without BBs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is only called once for each opened image, so we can do it the easy
way.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
