It is only a typo issue, need use tswapal(target_vec[i].iov_len) for the
len.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When failure occurs during locking of vec[i], we also need to unlock all
already locked vec[i] in failure processing code block before return.
Code in unlock_user() checks vec[i].iov_base for NULL, so there's no
need not check it .
If error is EFAULT when "i == 0", vec[i].iov_base is NULL, we can just
skip it, so can still use "while (--i >= 0)" loop condition.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When passing ancillary data through a unix socket, handle
credentials properly instead of doing a simple copy and
issuing a warning.
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The m68k signal frame setup code which writes the signal return
trampoline code to the stack was assuming that a 'long' was 32 bits;
on 64 bit systems this meant we would end up writing the 32 bit
(2 insn) trampoline sequence to retaddr+4,retaddr+6 instead of
the intended retaddr+0,retaddr+2, resulting in a guest crash when
it tried to execute the invalid zero-bytes at retaddr+0.
Fix by using uint32_t instead; also use uint16_t rather than short
for consistency. This fixes bug LP:1404690.
Reported-by: Michel Boaventura
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Without this fix, qemu segfaults when emulating the sigaltstack syscall,
because it incorrectly treats the ss_flags field as 64 bits rather than 32
bits.
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
linux-user passes the cmd argument of the ioctl syscall as a signed long,
but compares it to an unsigned int when iterating through the ioctl_entries
list. When the cmd is a large value like 0x80047476 (TARGET_TIOCSWINSZ on
mips64) it gets sign-extended to 0xffffffff80047476, causing the comparison
to fail and resulting in lots of spurious "Unsupported ioctl" errors.
Changing the target_cmd field in the ioctl_entries list to a signed int
causes those values to be sign-extended as well during the comparison.
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The resource argument is translated from host to target for
[gs]etprlimit but not for prlimit64. Fix this.
Signed-off-by: Felix Janda <felix.janda@posteo.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The function copy_siginfo_to_user() just calls tswap_siginfo(), so
call the latter function directly and delete the wrapper function.
The wrapper is actually misleading since it implies that the
semantics are like the kernel function with the same name which
copies the data to a guest user-space address. In fact tswap_siginfo()
just does data-structure conversion between two structures whose
addresses are host addresses (the copy to userspace is handled
in QEMU by the lock_user/unlock_user calls).
This also fixes clang complaints about the wrapper being unused
in some configs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The function end_exclusive() isn't used on all targets; mark it as
such to avoid a clang warning.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The start_exclusive() infrastructure is used on all target
architectures, even if only to do the "stop all CPUs before
dumping core" in force_sig(), so be consistent and call
cpu_exec_start/end in the main loop of every target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The aCC array in fpopcode.c is completely unused in QEMU; delete
it (silencing a clang warning).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For historical reasons, the define for the shmat() syscall on Alpha is
NR_osf_shmat; however it has the same semantics as this syscall does
on all other architectures, so define TARGET_NR_shmat as well so that
QEMU's code for the syscall is enabled.
This patch brings our behaviour on the LTP shmat tests into line
with that for ARM (still not a perfect pass rate but not "this syscall
is completely broken" as we had before).
(Problem detected via a clang warning that the do_shmat() function
was unused on Alpha.)
Cc: Richard Henderson <rth@twiddle.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Remove the function current_exec_domain_sig(), which always returns
its argument. This was intended as a stub for supporting the kernel's
exec_domain handling, but:
* we don't have any of the other code for execution domains
* in the kernel this handling is architecture-specific, not generic
* we only call this function in the x86, ppc and sh4 signal code paths,
and the PPC one is wrong anyway because the PPC kernel doesn't
have this signal-remapping code
So it's best to simply delete the function; any future attempt to
implement exec domains will be better served by adding the correct
code from scratch based on the kernel sources at that time.
This change also fixes some clang warnings about the function being
defined but not used for some target architectures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In the m68k cpu_loop() use get_user_u16 to read the immediate for
the simcall rahter than lduw, to bring it into line with how other
archs do it and to remove another user of the ldl family of functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1421334118-3287-8-git-send-email-peter.maydell@linaro.org
Use the cpu_ld*_data and cpu_st*_data family of functions to access
guest memory in vm86.c rather than the very short-named ldl/stl functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1421334118-3287-7-git-send-email-peter.maydell@linaro.org
The _raw accessor functions are an implementation detail that has
leaked out to some callsites. Use get_user_u64() instead of ldq_raw().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1421334118-3287-5-git-send-email-peter.maydell@linaro.org
The TARGET_HAS_ICE #define is intended to indicate whether a target-*
guest CPU implementation supports the breakpoint handling. However,
all our guest CPUs have that support (the only two which do not
define TARGET_HAS_ICE are unicore32 and openrisc, and in both those
cases the bp support is present and the lack of the #define is just
a bug). So remove the #define entirely: all new guest CPU support
should include breakpoint handling as part of the basic implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1420484960-32365-1-git-send-email-peter.maydell@linaro.org
Replace the 20Kc original MIPS64 ISA processor used for 64-bit user
emulation with the 5KEf processor that implements the MIPS64r2 ISA,
complementing the choice of the 24Kf processor for 32-bit emulation.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
When EL3 is running in AArch32 (or ARMv7 with Security Extensions)
FCSEIDR, CONTEXTIDR, TPIDRURW, TPIDRURO and TPIDRPRW have a secure
and a non-secure instance.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1416242878-876-25-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When creating a timer handle, we give the timer id a special magic offset
of 0xcafe0000. However, we never mask that offset out of the timer id before
we start using it to dereference our timer array. So we always end up aborting
timer operations because the timer id is out of bounds.
This was not an issue before my patch e52a99f756 ("linux-user: Simplify
timerid checks on g_posix_timers range") because before we would blindly mask
anything above the first 16 bits.
This patch simplifies the code around timer id creation by introducing a proper
target_timer_id typedef that is s32, just like Linux has it. It also changes the
magic offset to a value that makes all timer ids be positive.
Reported-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When computing the upper address of a program segment, do not subtract the
offset from the virtual address; instead compute the sum of the virtual address
and the memory size.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The first program header does not necessarily start at offset 0. This change
corresponds to what the Linux kernel does in load_elf_binary().
Signed-off-by: Jonas Maebe <jonas.maebe@elis.ugent.be>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
On AArch64 the si_addr field of siginfo_t is truncated to 32 bits
because the fault address passes through an uint32_t variable.
Follow Peters suggestion and drop the uint32_t variable
since its only used once in the Aarch64 loop.
Reported-by: Amanieu d'Antras <amanieu@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch introduces the -seed command line option and the
QEMU_RAND_SEED environment variable for setting the random seed, which
is used for the AT_RANDOM ELF aux entry.
Signed-off-by: Magnus Reftel <reftel@spotify.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The initial base address is miscalculated in walk_memory_regions().
It has to be shifted TARGET_PAGE_BITS more. Holder variables are
extended to target_ulong size otherwise they don't fit for MIPS N32
(a 32-bit ABI with a 64-bit address space) and qemu won't compile.
The issue led to incorrect debug output of memory maps and a
mis-formed coredumped file.
Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Without this, builds on older systems fail with:
qemu/linux-user/syscall.c:61:25: warning: sys/timerfd.h: No such file or directory
v2: fix the usual case where CONFIG_TIMERFD is enabled..
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We check whether the passed in timer id is negative on all calls
that involve g_posix_timers.
However, these checks are bogus. First off we limit the timer_id to
16 bits which is not what Linux does. Then we check whether it's negative
which it can't be because we masked it.
We can safely remove the masking. For the negativity check we can just
treat the timerid as unsigned and only check for upper boundaries.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The blkpg ioctl can take different payloads depending on the opcode in
its payload structure. Create a new special ioctl handler that can only
deal with partition style ones for now.
This patch fixes running parted for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We have support for the epoll_pwait syscall, but it wasn't enabled for
ARM guests because we hadn't defined the syscall number; correct this
deficiency.
Reported-by: Dave Flogeras <dflogeras2@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The current implementation of watchpoints requires that they
have a power of 2 length which is not greater than TARGET_PAGE_SIZE
and that their address is a multiple of their length. Watchpoints
on ARM don't fit these restrictions, so change the implementation
so they can be relaxed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Function pointers in the 64-bit ELFv2 PowerPC ABI are actual (internal)
entry point addresses. However, when invoking a function via a function
pointer, GPR 12 must also be set to this address so that the TOC may be
handled properly.
Add this support to the invocation of a signal handler.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Eliminate the stub for the do_setcontext() function for TARGET_PPC64. The
implementation re-uses the existing TARGET_PPC32 code with the only change
being the computation of the address of the register save area.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Properly dereference 64-bit PPC ELF V1 ABIT function pointers to signal handlers.
On this platform, function pointers are pointers to structures and the first 64
bits of such a structure contains the function's entry point. The second 64 bits
contains the TOC pointer, which must be placed into GPR 2.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Enable the 64-bit PowerPC signal handling code that was previously
disabled via #ifdefs. Specifically:
- Move the target_mcontext (register save area) structure and
append it to the 64-bit target_sigcontext structure. This
provides the space on the stack for saving and restoring
context.
- Define the target_rt_sigframe for 64-bit.
- Adjust the setup_frame and setup_rt_frame routines to properly
select the target_mcontext area and trampoline within the stack
frame; tthis is different for 32-bit and 64-bit implementations.
- Adjust the do_setcontext stub for 64-bit so that it compiles
without warnings.
The 64-bit signal handling code is still not functional after this
change; but the 32-bit code is. Subsequent changes will address
specific issues with the 64-bit code.
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: fix build on 32bit hosts, ppc64abi32]
Signed-off-by: Alexander Graf <agraf@suse.de>
Split the encoding of the PowerPC sigreturn trampoline from the saving of
register state onto the signal handler stack. This will make it easier
in subsequent patches to deal with variations in the stack frame layouts between
32 and 64 bit PowerPC.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The code that sets the stack frame back pointer is incorrect for
the setup_rt_frame() code; qemu will abort (SIGSEGV) in some
environments. The setup_frame code was fixed in commit
beb526b121 but the setup_rt_frame
code was not.
Make the setup_rt_frame code consistent with the setup_frame
code.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Handle variable "fd_orig" going out of scope leaks the handle.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Although not technically not required by POSIX, the writev system call will
typically write out its buffers individually. That is, if the first buffer
is written successfully, but the second buffer pointer is invalid, then
the first chuck will be written and its size is returned.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The argument to the mlockall system call is not necessarily the same on
all platforms and thus may require translation prior to passing to the
host.
For example, PowerPC 64 bit platforms define values for MCL_CURRENT
(0x2000) and MCL_FUTURE (0x4000) which are different from Intel platforms
(0x1 and 0x2, respectively)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The clock_nanosleep syscall is unusual in that it returns positive
numbers in error handling situations, versus returning -1 and setting
errno, or returning a negative errno value. On POWER, the kernel will
set the SO bit of CR0 to indicate failure in a syscall. QEMU has
generic handling to do this for syscalls with standard return values.
Add special case code for clock_nanosleep to handle CR0 properly.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The ELF V2 ABI for PPC64 defines MINSIGSTKSZ as 4096 bytes whereas it was
2048 previously.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The get_ppc64_abi is used to determine the ELF ABI (i.e. V1 or V2). This
routine is currently implemented in the linux-user/elfload.c file but
is useful in other scenarios. Move the routine to a more generally
available location (linux-user/ppc/target_cpu.h).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Properly detect a fault when attempting to store into an invalid
struct timespec pointer.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The sched_getparam, sched_setparam and sched_setscheduler system
calls take a pointer argument to a sched_param structure. When
this pointer is null, errno should be set to EINVAL.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The msgsnd system call takes an argument that describes the message
size (msgsz) and is of type size_t. The system call should set
errno to EINVAL in the event that a negative message size is passed.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The mq_open system call takes an optional struct mq_attr pointer
argument in the fourth position. This pointer is used when O_CREAT
is specified in the flags (second) argument. It may be NULL, in
which case the queue is created with implementation defined attributes.
Change the code to properly handle the case when NULL is passed in the
arg4 position.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For those target ABIs that use the ipc system call (e.g. POWER),
the third argument is used in the shmat path as a pointer. It
therefore must be declared as an abi_long (versus int) so that
the address bits are not lost in truncation. In fact, all arguments
to do_ipc should be declared as abit_long.
In fact, it makes more sense for all of the arguments to be declaried
as abi_long (except call).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The semun union used in the semctl system call contains both an int (val) and
pointers. In cross-endian situations on 64 bit targets, the value passed to
semctl is an 8 byte (abi_long) value and thus does not have the 4-byte val
field in the correct location. In order to rectify this, the other half
of the union must be accessed. This is achieved in code by performing
a byte swap on the entire 8 byte union, followed by a 4-byte swap of the
first half.
Also, eliminate an extraneous (dead) line of code that sets target_su.val in
the IPC_SET/IPC_GET case.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When the ipc system call is used to wrap a semctl system call,
the ptr argument to ipc needs to be dereferenced prior to passing
it to the semctl handler. This is because the fourth argument to
semctl is a union and not a pointer to a union.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The 64 bit PowerPC platforms eliminate the _unused1 and _unused2
elements of the semid_ds structure from <sys/sem.h>. So eliminate
these from the target_semid_ds structure.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add support for the setns and unshare syscalls, trivially passed through to
the host. Based on patches by Paul Burton, added configure check.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add support for the ioprio_get & ioprio_set syscalls, allowing their
use by target programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Adds support for the timerfd_create, timerfd_gettime & timerfd_settime
syscalls, allowing use of timerfds by target programs.
v2: By Riku - added configure check for timerfd and ifdefs
for benefit of old distributions like RHEL5.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The current code always returns the length of the path when it should
be returning the number of bytes it wrote to the output string.
Further, readlink is not supposed to append a NUL byte, but the current
snprintf logic will always do just that.
Even further, if you pass in a length of 0, you're suppoesd to get back
an error (EINVAL), but the current logic just returns 0.
Further still, if there was an error reading the symlink, we should not
go ahead and try to read the target buffer as it is garbage.
Simple test for the first two issues:
$ cat test.c
int main() {
char buf[50];
size_t len;
for (len = 0; len < 10; ++len) {
memset(buf, '!', sizeof(buf));
ssize_t ret = readlink("/proc/self/exe", buf, len);
buf[20] = '\0';
printf("readlink(/proc/self/exe, {%s}, %zu) = %zi\n", buf, len, ret);
}
return 0;
}
Now compare the output of the native:
$ gcc test.c -o /tmp/x
$ /tmp/x
$ strace /tmp/x
With what qemu does:
$ armv7a-cros-linux-gnueabi-gcc test.c -o /tmp/x -static
$ qemu-arm /tmp/x
$ qemu-arm -strace /tmp/x
Signed-off-by: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
There were a number of bugs in the conversion of the sigevent
argument to timer_create from target to host format:
* signal number not converted from target to host
* thread ID not copied across
* sigev_value not copied across
* we never unlocked the struct when we were done
Between them, these problems meant that SIGEV_THREAD_ID
timers (and the glibc-implemented SIGEV_THREAD timers which
depend on them) didn't work.
Fix these problems and clean up the code a little by pulling
the struct conversion out into its own function, in line with
how we convert various other structs. This allows the test
program in bug LP:1042388 to run.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Currently syscall instruction is buggy on user mode X86_64,
the EIP is updated after do_syscall(), that is too late for
clone(). Because clone() will create a thread at the env->EIP
(the address of syscall insn), and then child thread enters
do_syscall() again, that is not expected. Sometimes it is tragic.
User mode syscall insn emulation is not used MSR, so the
action should be same to INT 0x80. INT 0x80 will update EIP in
do_interrupt(), ditto for syscall() for consistency.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
While Mikhail fixed /proc/self/maps, it was noticed openat calls are
not redirected currently. Some archs don't have open at all, so
openat needs to be redirected.
Fix this by consolidating open/openat code to do_openat - open
is implemented using openat(AT_FDCWD, ... ), which according
to open(2) man page is identical.
Since all targets now have openat, remove the ifdef around sys_openat
and openat: case in do_syscall.
Cc: Mikhail Ilin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Build /proc/self/maps doing a match against guest memory translation table.
Output only that map records which are valid for guest memory layout.
Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As reported by Laurent, which should use TARGET_SA_ONSTACK
on arm, microblaze and openrisc targets like we do on all
others. Practical matter is minimal as for almost all archs
SA_ONSTACK is 0x08000000:
http://lxr.free-electrons.com/ident?i=SA_ONSTACK
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
target_to_host_sockaddr() may increase the lenth with 1 byte
for AF_UNIX sockets so allocate 1 extra byte.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Wrong type was used in ioctl definition.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The default, 970fx, doesn't support MSR_LE. So even though we set LE in
ppc_cpu_reset, it gets cleared again in hreg_store_msr. Error out if a
user-selected cpu model doesn't support LE.
Signed-off-by: Richard Henderson <rth@twiddle.net>
[agraf: switch to POWER7 as default for BE and LE]
Signed-off-by: Alexander Graf <agraf@suse.de>
* remotes/riku/linux-user-for-upstream:
linux-user: support the SIOCGIFINDEX ioctl
linux-user: support the KDSIGACCEPT ioctl
linux-user: allow NULL tv argument for settimeofday
linux-user: respect timezone for settimeofday
linux-user: fix struct target_epoll_event layout for MIPS
linux-user: support strace of epoll_create1
linux-user: allow NULL arguments to mount
linux-user: support SO_PASSSEC setsockopt option
linux-user: support SO_{SND, RCV}BUFFORCE setsockopt options
linux-user: support SO_ACCEPTCONN getsockopt option
linux-user: translate the result of getsockopt SO_TYPE
linux-user: added fake open() for /proc/self/cmdline
Add support for MAP_NORESERVE mmap flag.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a definition of the SIOCGIFINDEX ioctl, allowing its use by target
programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add a definition of the KDSIGACCEPT ioctl & allow its use by target
programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The tv argument to the settimeofday syscall is allowed to be NULL, if
the program only wishes to provide the timezone. QEMU previously
returned -EFAULT when tv was NULL. Instead, execute the syscall &
provide NULL to the kernel as the target program expected.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The settimeofday syscall accepts a tz argument indicating the desired
timezone to the kernel. QEMU previously ignored any argument provided
by the target program & always passed NULL to the kernel. Instead,
translate the argument & pass along the data userland provided.
Although this argument is described by the settimeofday man page as
obsolete, it is used by systemd as of version 213.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
MIPS requires the pad field to 64b-align the data field just as ARM
does.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add the epoll_create1 syscall to strace.list in order to display that
syscall when it occurs, rather than a message about the syscall being
unknown despite QEMU already implementing support for it.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Calls to the mount syscall can legitimately provide NULL as the value
for the source of filesystemtype arguments, which QEMU would previously
reject & return -EFAULT to the target program. An example of this is
remounting an already mounted filesystem with different properties.
Instead of rejecting such syscalls with -EFAULT, pass NULL along to the
kernel as the target program expects.
Additionally this patch fixes a potential memory leak when DEBUG_REMAP
is enabled and lock_user_string fails on the target or filesystemtype
arguments but a prior argument was non-NULL and already locked.
Since the patch already touched most lines of the TARGET_NR_mount case,
it fixes the indentation & coding style for good measure.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Translate the SO_PASSSEC option to setsockopt to the host value &
perform the syscall as expected, allowing use of the option by target
programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Translate the SO_SNDBUFFORCE & SO_RCVBUFFORCE options to setsockopt to
the host values & perform the syscall as expected, allowing use of those
options by target programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Translate the SO_ACCEPTCONN option to the host value & execute the
syscall as expected.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
QEMU previously passed the result of the host syscall directly to the
target program. This is a problem if the host & target have different
representations of socket types, as is the case when running a MIPS
target program on an x86 host. Introduce a host_to_target_sock_type
helper function mirroring the existing target_to_host_sock_type, and
call it to translate the value provided by getsockopt when called for
the SO_TYPE option.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
mmap_flags_tbl contains a list of mmap flags, and how to map them to
the target. This patch adds MAP_NORESERVE, which was missing to the
list.
Signed-off-by: Christophe Lyon <christophe.lyon@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Set bits in the AT_HWCAP2 entry of the AUXV. Specifically, detect and set bits
for bctar, ISEL and ISA 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add VSX, DFP and ISA 2.06 to the bits identified in the AT_HWCAP
entry of the AUXV.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Set the AT_ICACHEBSIZE and AT_DCACHEBSIZE entries of the AUXV to match the
CPU model's cache line sizes. This fixes memory clobbering problems on more
recent Book 3s implementations; memset(p, 0, N) will use the dcbz instruction
when N is sufficiently large and many of the newer server CPUs have cache lines
sizes of 128 bytes.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
OABI arm used a software interrupt(0xef9f0001) for breakpoints.
Since 2005 gdb has used the break instruction(0xe7f001f0) for EABI.
Apparently Steel Bank Common Lisp still uses the swi instruction.
This is the kernel implementation:
http://lxr.free-electrons.com/source/arch/arm/kernel/traps.c#L598
Signed-off-by: Hunter Laux <hunterlaux@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
As a "utility", it only supported ppc, and in a way that other
tcg backends provided directly in tcg-target.h. Removing this
disparity is easier now that the two ppc backends are merged.
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Instead of getting backup auxv data from the env pointer given to main,
read it from /proc/self/auxv. We can do this at any time, so we're not
tied to any ordering wrt a call to qemu_init_auxval from main.
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
From MIPS documentation (Volume III):
UserLocal Register (CP0 Register 4, Select 2)
Compliance Level: Recommended.
The UserLocal register is a read-write register that is not interpreted by
the hardware and conditionally readable via the RDHWR instruction.
This register only exists if the Config3-ULRI register field is set.
Privileged software may write this register with arbitrary information and
make it accessible to unprivileged software via register 29 (ULR) of the
RDHWR instruction. To do so, bit 29 of the HWREna register must be set to a
1 to enable unprivileged access to the register.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In user mode Linux, Qemu currently refuses to load ELF files that do not
contain section headers (ehdr->e_shentsize == 0). Since section headers are not
required in order to load an ELF file, simply removing the e_shentsize check in
elf_check_ehdr() allows ELF binaries with no section headers to be run properly
in user mode:
Signed-off-by: Craig Heffner <cheffner@tacnetsol.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This fixes "Cannot open audit interface - aborting." when the
EAFNOSUPPORT errno differs between the target and host
architectures (e.g. mips target and x86_64 host).
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If the guest's "long" type is smaller than the host's, then
our sched_getaffinity wrapper needs to round the buffer size
up to a multiple of the host sizeof(long). This means that when
we copy the data back from the host buffer to the guest's
buffer there might be more than we can fit. Rather than
overflowing the guest's buffer, handle this case by returning
EINVAL or ignoring the unused extra space, as appropriate.
Note that only guests using the syscall interface directly might
run into this bug -- the glibc wrappers around it will always
use a buffer whose size is a multiple of 8 regardless of guest
architecture.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We were returning the incorrect uname string (with a hyphen, not
an underscore) for x86_64. Fix this by removing the x86_64 special
case, since the default "just use UNAME_MACHINE" behaviour suffices.
This leaves cpu_to_uname_machine() special cases for only those
architectures which need to vary the string based on runtime CPU
features.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
gcc-4.9 finds unused operand:
linux-user/syscall.c: In function ‘host_to_target_stat64’:
linux-user/qemu.h:301:19: error: right-hand operand of comma expression
has no effect [-Werror=unused-value]
((hptr), (x)), 0)
Just removing the rh operand is no good, it will error in later:
linux-user/main.c: In function ‘arm_kernel_cmpxchg64_helper’:
linux-user/qemu.h:330:15: error: void value not ignored as it ought to be
__ret = __put_user((x), __hptr); \
Thus, remove setting __ret from __get_user and __put_user, as and
set the right hand operand to (void)0 to make it clear that these
return never nothing.
This commit depends on the signal.c cleanup, to ensure bisectable
version history.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
The last remaining check for return value of __get_user.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
Remove checks of __get_user and the err variable
used to control flow with it.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
As __get_user and __put_user do not return errors, remove the
if checks from around them. This allows making the save/restore
functions void.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Alexander Graf <agraf@suse.de>
Remove "if(__put_user" checks and their related error paths
for all architecture's setup_frame, setup_rt_frame and similar.
Remove the unlock_user_struct when the only way to end up there is
from failed lock_user_struct.
Remove err variable if there are no users for it in the function
anymore.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Remove "if(__get_user" checks and their related error paths
for all architecture's do_sigreturn. Remove the unlock_user_struct
when the only way to end up there is from failed lock_user_struct.
v3: remove unneccesary sigsegv label as suggested by Peter
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Access is already checked in the lock_user_struct
call before.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
A function never called from anywhere, obviously half-complete.
Remove function and if someone wants to complete this, please
check the old version out of git history.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
make most implementations of restore_sigcontext void and
remove checking it's return value from functions calling
restore_sigcontext.
The exception is the X86 version of the function that is
too different from others to deal in this way, and arm
version, to keep possibility of erroring out from failed
valid_user_regs.
v3: keep arm valid_user_regs for filling in near future.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Make all implementations of setup_sigcontext void and
remove checking it's return value from functions calling
setup_sigcontext.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Since copy_siginfo_to_user always returns 0, make it void
and remove any checks for return value from calling functions.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Remove the remaining check for __put_user return
value, and all the checks for err variable which
isn't set anywhere anymore.
No we can only end up in give_sigsegv due to failed
lock_user_struct - thus we remove the unlock_user_struct
to avoid unlocking a region never locked.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Remove all the simple cases of reading the return value
of __get_user and __put_user.
We set err = 0 in sparc versions of do_sigreturn and
sparc64_set_context to avoid compile error, but else this patch is
just general removal of err |= __get_user ... idiom.
v2: remove err variable from target_rt_restore_ucontext
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
We tell the guest its page size via AUX vectors. The guest process then uses
this page size as information on which boundaries it can mmap() things.
However, if the host has a bigger page size granularity than the guest, it can
not fulfill these mmap() requests - which falls apart when MAP_FIXED is passed
to mmap.
So in that case, let the guest know that we're running on a bigger page size
granularity than the target would require.
This fixes running qemu-ppc (TARGET_PAGE_SIZE=4k) on a 64k page size ppc64 host
for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The size and register information are encoded into the reserve_info field
of CPU state in the store conditional translation code. Specifically, the
size is shifted left by 5 bits (see target-ppc/translate.c gen_conditional_store).
The user-mode store conditional code erroneously extracts the size by ANDing
with a 4 bit mask; this breaks if size >= 16.
Eliminate the mask to make the extraction of size mirror its encoding.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The existing code does a check to ensure that a .bss region is properly
mmap'd. When additional mmap is required, the (guest) pages are also
validated. However, this code has a bug: when host page size is larger
than target page size, it is possible for the .bss pages to already be
(host) mapped but the guest .bss pages may not be valid.
The check to mmap additional space is separated from the flagging of the
target (guest) pages, thus ensuring that both aspects are done properly.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This allows running PPC64 little-endian in user mode if target is configured
that way. In PPC64 LE user mode we set MSR.LE during initialization.
Signed-off-by: Doug Kwan <dougkwan@google.com>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Look at ELF header to determine ABI version on PPC64. This is required
for executing the first instruction correctly. Also print correct machine
name in uname() system call.
Signed-off-by: Doug Kwan <dougkwan@google.com>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have a separate ARM_FEATURE_V8_PMULL bit, use it for
the A64 PMULL, not the AES feature bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the VMULL.P64 polynomial 64x64 to 128 bit multiplication
instruction in the A32/T32 instruction sets; this is part of the v8
Crypto Extensions.
To do this we have to move the neon_pmull_64_{lo,hi} helpers from
helper-a64.c into neon_helper.c so they can be used by the AArch32
translator.
Inspired-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401386724-26529-4-git-send-email-peter.maydell@linaro.org
This adds support for the SHA1 and SHA256 instructions that are available
on some v8 implementations of Aarch32.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401386724-26529-2-git-send-email-peter.maydell@linaro.org
[PMM:
* rebase
* fix bad indent
* add a missing UNDEF check for Q!=1 in the 3-reg SHA1/SHA256 case
* use g_assert_not_reached()
* don't re-extract bit 6 for the 2-reg-misc encodings
* set the ELF HWCAP2 bits for the new features
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/softmmu-smap: (33 commits)
target-i386: cleanup x86_cpu_get_phys_page_debug
target-i386: fix protection bits in the TLB for SMEP
target-i386: support long addresses for 4MB pages (PSE-36)
target-i386: raise page fault for reserved bits in large pages
target-i386: unify reserved bits and NX bit check
target-i386: simplify pte/vaddr calculation
target-i386: raise page fault for reserved physical address bits
target-i386: test reserved PS bit on PML4Es
target-i386: set correct error code for reserved bit access
target-i386: introduce support for 1 GB pages
target-i386: introduce do_check_protect label
target-i386: tweak handling of PG_NX_MASK
target-i386: commonize checks for PAE and non-PAE
target-i386: commonize checks for 4MB and 4KB pages
target-i386: commonize checks for 2MB and 4KB pages
target-i386: fix coding standards in x86_cpu_handle_mmu_fault
target-i386: simplify SMAP handling in MMU_KSMAP_IDX
target-i386: fix kernel accesses with SMAP and CPL = 3
target-i386: move check_io helpers to seg_helper.c
target-i386: rename KSMAP to KNOSMAP
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will collect all load and store helpers soon. For now
it is just a replacement for softmmu_exec.h, which this patch
stops including directly, but we also include it where this will
be necessary in order to simplify the next patch.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the next patch, these need to be correct or VM86 tasks
have the wrong CPL. The flags are basically what the Intel VMX
documentation say is mandatory for entry into a VM86 guest.
For consistency, SMM ought to have the same flags except with
CPL=0.
Tested-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of manually calling cpu_x86_set_cpl() when the CPL changes,
check for CPL changes on calls to cpu_x86_load_seg_cache(R_CS). Every
location that called cpu_x86_set_cpl() also called
cpu_x86_load_seg_cache(R_CS), so cpu_x86_set_cpl() is no longer
required.
This fixes the SMM handler code as it was not setting/restoring the
CPL level manually.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implementations of system calls getrusage and wait4 have not previously
handled correctly cases when incorrect address of struct rusage is
passed.
This change makes sure return values are correctly set for these cases.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The ARM kernel has chosen to spill into the HWCAP2 ELF feature bit flags
early, even though it hasn't yet exhausted all 32 bits of the HWCAP word.
Add support for setting this in the same way we do for HWCAP.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The ARM target-specific code in elfload.c was incorrectly allowing
the 64-bit ARM target to use most of the existing 32-bit definitions:
most noticably this meant that our HWCAP bits passed to the guest
were wrong, and register handling when dumping core was totally
broken. Fix this by properly separating the 64 and 32 bit code,
since they have more differences than similarities.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The kernel has added support for a number of new ARM HWCAP bits;
add them to QEMU, including support for setting them where we have
a corresponding CPU feature bit.
We were also incorrectly setting the VFPv3D16 HWCAP -- this means
"only 16 D registers", not "supports 16-bit floating point format";
since QEMU always has 32 D registers for VFPv3, we can just remove
the line that incorrectly set this bit.
The kernel does not set the HWCAP_FPA even if it is providing FPA
emulation via nwfpe, so don't set this bit in QEMU either.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The ELF HWCAP bits for ARM features THUMBEE, NEON, VFPv3 and VFPv3D16 are
all off by one compared to the kernel definitions. Fix this discrepancy
and add in the missing CRUNCH bit which was the cause of the off-by-one
error. (We don't emulate any of the CPUs which have that weird hardware,
so it's otherwise uninteresting to us.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
--enable-uname-release was a rather heavyweight hammer, as it allows
providing values less that UNAME_MINIMUM_RELEASE. Also, it affects
all built linux-user targets, which in most cases is not what user
wants.
Now that we have UNAME_MINIMUM_RELEASE for all linux-user platforms,
we can drop --enable-uname-release and the related CONFIG_UNAME_RELEASE
define.
Users can still override the variable with QEMU_UNAME=2.6.32 or -r
command line option. If distributors need to update a minimum version
for a specific target, it can be done by updating UNAME_MINIMUM_RELEASE.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Set the fault address correctly in the signal information passed
to a signal handler for AArch64 guests.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the public sigset_t instead of the glibc specific internal
__sigset_t in _syscall.
Calculate the sigevent pad size is calculated in similar way as kernel
does it instead of using glibc internal field _pad.
This is needed for building with musl libc.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Recently merged kernel ports (such as OpenRISC and Meta) have an llseek
system call instead of _llseek. This is handled for the host
architecture by defining __NR__llseek as __NR_llseek, but not for the
target architecture.
Handle it in the same way for these architectures, defining
TARGET_NR__llseek as TARGET_NR_llseek.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Jia Liu <proljc@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Assert that the amount of stack space used for auxvec, envp & argv
exactly matches the amount allocated. This catches if DLINFO_ITEMS isn't
updated when another NEW_AUX_ENT is added.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
QEMU already supports /proc/self/{maps,stat,auxv} so addition of
/proc/self/exe is rather trivial.
Fixes https://bugs.launchpad.net/qemu/+bug/1299190
Signed-off-by: Maxim Ostapenko <m.ostapenko@partner.samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For AArch32 exceptions, the only information provided about
the cause of an exception is the individual exception type (data
abort, undef, etc), which we store in cs->exception_index. For
AArch64, the CPU provides much more detail about the cause of
the exception, which can be found in the syndrome register.
Create a set of fields in CPUARMState which must be filled in
whenever an exception is raised, so that exception entry can
correctly fill in the syndrome register for the guest.
This includes the information which in AArch32 appears in
the DFAR and IFAR (fault address registers) and the DFSR
and IFSR (fault status registers) for data aborts and
prefetch aborts, since if we end up taking the MMU fault
to AArch64 rather than AArch32 this will need to end up
in different system registers.
This patch does a refactoring which moves the setting of the
AArch32 DFAR/DFSR/IFAR/IFSR from the point where the exception
is raised to the point where it is taken. (This is no change
for cores with an MMU, retains the existing clearly incorrect
behaviour for ARM946 of trashing the MP access permissions
registers which share the c5_data and c5_insn state fields,
and has no effect for v7M because we don't implement its
MPU fault status or address registers.)
As a side effect of the cleanup we fix a bug in the AArch64
linux-user mode code where we were passing a 64 bit fault
address through the 32 bit c6_data/c6_insn fields: it now
goes via the always-64-bit exception.vaddress.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Flags NONBLOCK and CLOEXEC can have different values on the host and the
guest, so set correct host values before calling accept4().
This fixes several issues with accept4 system call and user-mode of QEMU.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Commit a07c67dfcc (Implement AT_CLKTCK.) back in March 2008 added a
new auxvec entry but didn't increment DLINFO_ITEMS, so it's been out of
sync ever since.
Bump it up to 14 so that it matches the number of NEW_AUX_ENT's that
need to be counted in create_elf_tables().
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Paul Brook <paul@codesourcery.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Implement the capget and capset syscalls. This is useful because
simple programs like 'ls' try to use it in AArch64, and otherwise
we emit a lot of noise about it being unimplemented.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Don't allow the linux-user guest to block SIGSEGV -- QEMU needs this
signal to detect accesses to pages which it has marked read-only
because it has cached translated code from them.
We implement this by making the do_sigprocmask() wrapper suppress
SIGSEGV when doing the host process signal mask manipulation; instead
we store the current state of SIGSEGV in the TaskState struct.
If we get a SIGSEGV for the guest when the guest has blocked the
signal, we treat it as if the default SEGV handler was in place,
as the kernel does for forced SIGSEGV delivery.
This patch is based on an idea by Alex Barcelo, but rather than
simply lying to the guest about the SIGSEGV state we track it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Alex Barcelo <abarcelo@ac.upc.edu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Create a wrapper for signal mask changes initiated by the guest;
(this includes syscalls and also the sigreturns from signal.c)
this will give us a place to put code which prevents the guest
from changing the handling of signals used by QEMU itself
internally.
The wrapper is called from all the guest-initiated sigprocmask, but
is not called from internal qemu sigprocmask calls.
Signed-off-by: Alex Barcelo <abarcelo@ac.upc.edu>
[PMM: Added calls to wrapper for sigprocmask uses in signal.c
when setting the signal mask on entry and exit from signal
handlers, since these also are guest-provided signal masks.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
AArch64 Linux, unlike AArch32, doesn't use a commpage. This means we
should not be reserving room in the guest address space for one.
Fixes LP:1287195.
Reported-by: Amanieu d'Antras <amanieu@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
F_GETOWN is replaced by F_GETOWN_EX inside the glibc fcntl wrapper
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
QEMU's implementation of the m68k atomic_barrier syscall, like the kernel's,
is just a no-op. However we still need to return a result code from it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The error path in AArch64 do_rt_sigreturn() which fails before
attempting lock_user_struct() was doing an unlock_user_struct()
on an uninitialized variable. Initialize frame to NULL so we
can use the same error-exit path in all cases (unlock of NULL
is permitted and does nothing).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Most targets were using offsetof(CPUFooState, breakpoints) to determine
how much of CPUFooState to clear on reset. Use the next field after
CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise.
Signed-off-by: Andreas Färber <afaerber@suse.de>
