We do this so we can check on the corresponding stc{w,d}x. whether the
value has changed. It's a poor man's form of implementing atomic
operations and is valid only for NPTL usermode Linux emulation.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
We only need to make sure that the clone syscall looks like it
succeeded, not clobber 60% of the register set.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
440 and desktop codes use different input constants for interrupt indication.
Let's use the respective ones for KVM.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We need to tell the kernel about some initial CPU state we don't have yet,
so let's use the "sregs" IOCTL for that and simply put the Processor Version
Register in there.
Now the kernel knows which guest CPU to virtualize.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I used the following command to enable debugging:
perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * */* */*/*
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
According to PPC440 user manual, PPC 440 supports ``mftb'' even it's a
preserved instruction:
PPC440_UM2013.pdf, p.445, table A-3
when I compile a kernel (2.6.30, bamboo_defconfig/440EP &
canyonlands/460EX), I can see ``mftb'' by using ppc-xxx-objdump
vmlinux
I have also checked the ppc 440x[456], 460S, 464, they also should support mftb.
The following patch enable mftb for all ppc 440 variants, including:
440EP, 440GP, 440x4, 440x5 and 460
Signed-off-by: Baojun Wang <wangbj@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For 32-bit PPC targets, we translated:
evmergelo rX, rX, rY
as:
rX-lo = rY-lo
rX-hi = rX-lo
which is wrong, because we should be transferring rX-lo first. This
problem is fixed by swapping the order in which we write the parts of
rX.
Similarly, we translated:
evmergelohi rX, rX, rY
as:
rX-lo = rY-hi
rX-hi = rX-lo
In this case, we can't swap the assignment statements, because that
would just cause problems for:
evmergelohi rX, rY, rX
Instead, we detect the first case and save rX-lo in a temporary
variable:
tmp = rX-lo
rX-lo = rY-hi
rX-hi = tmp
These problems don't occur on PPC64 targets because we don't split the
SPE registers into hi/lo parts for such targets.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Access to the PVR SPR is normally forbidden from userspace apps. The
Linux kernel, however, fixes up reads in the appropriate trap handler.
To permit applications that read PVR to run on QEMU, then, we need to
implement the same handling of PVR reads.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Work around buffer and ioctlsocket argument type signedness problems
Suppress a prototype which is unused on mingw32
Expand a macro to avoid warnings from some GCC versions
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds the missing hooks to allow live migration in KVM mode.
It adds proper synchronization before/after saving/restoring the VCPU
states (note: PPC is untested), hooks into
cpu_physical_memory_set_dirty_tracking() to enable dirty memory logging
at KVM level, and synchronizes that drity log into QEMU's view before
running ram_live_save().
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The only target dependency for most hardware is sizeof(target_phys_addr_t).
Build these files into a convenience library, and use that instead of
building for every target.
Remove and poison various target specific macros to avoid bogus target
dependencies creeping back in.
Big/Little endian is not handled because devices should not know or care
about this to start with.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Do this so other pieces of code can make decisions based on the
capabilities of the CPU we're emulating.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
Include assert.h from qemu-common.h and remove other direct uses.
cpu-all.h still need to include it because of the dyngen-exec.h hacks
Signed-off-by: Paul Brook <paul@codesourcery.com>
According to 604eUM_book (see 8.3.3 Reset inputs p8-54), the IP bit is set
for hreset and the vector is at offset 0x100 from the exception prefix.
No difference in this area between 604 and 604e.
Signed-off-by: Tristan Gingold <gingold@adacore.com>
This replaces a compile time option for some targets and adds
this feature to targets which did not have a compile time option.
Add monitor command to enable or disable single step mode.
Modify monitor command "info status" to display single step mode.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7004 c046a42c-6fe2-441c-8c8c-71466251a162
While searching PC, always store the pc of a new instruction.
Instructions that didn't generate tcg code (such as nop) prevented the
next one to be referenced.
Based on patch for target-alpha, r6930.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6931 c046a42c-6fe2-441c-8c8c-71466251a162
Most 64 bit architectures I'm aware of support running 32 bit code
of the same architecture as well.
So x86_64 can run i386 code easily and ppc64 can run ppc code.
Unfortunately, the current checks are pretty strict. So you can only
load e.g. an x86_64 elf binary on qemu-system-x86_64, but no i386 one.
This can get really annoying. I first encountered this issue with
my multiboot patch, where qemu-system-x86_64 was unable to load an
i386 elf binary because the elf loader rejected it.
The same thing happened again on PPC64 now. The firmware we're loading
is a PPC32 elf binary, as it's shared with PPC32. But the platform is
PPC64.
Right now there is a hack for this in the ppc cpu.h definition, that
simply sets the type to PPC32 in system emulation mode. While that
works fine for the firmware, it's no good if you also want to load a
PPC64 kernel with -kernel.
So in order to solve this mess, I figured the easiest way is to make
the elf loader aware of platforms that are backwards compatible. For
now I was only sure that x86_64 does i386 and ppc64 does ppc32, but
maybe there are other combinations too.
This patch is a prerequisite for having a working -kernel option on
PPC64.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6855 c046a42c-6fe2-441c-8c8c-71466251a162
Rename bswap_i32 into bswap32_i32 and bswap_i64 into bswap64_i64
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6829 c046a42c-6fe2-441c-8c8c-71466251a162
Altivec and SPE both have 34 registers in their register sets, not 35
with a missing register 32.
GDB would ask for register 32 of the Altivec (resp. SPE) registers and
the code would claim it had zero width. The QEMU GDB stub code would
then return an E14 to GDB, which would complain about not being sure
whether p packets were supported or not.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6769 c046a42c-6fe2-441c-8c8c-71466251a162
The 970 doesn't know BAT, so let's not search BATs there.
This was only in as a hack for OpenHackWare so it would
work on PPC64.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6759 c046a42c-6fe2-441c-8c8c-71466251a162
Real 970 CPUs have the SLB not memory backed, but inside the CPU.
This breaks bridge mode for 970 for now, but at least keeps us from
overwriting physical addresses 0x0 - 0x300, rendering our interrupt
handlers useless.
I put in a stub for bridge mode operation that could be enabled
easily, but for now it's safer to leave that off I guess (970fx doesn't
have bridge mode AFAIK).
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6757 c046a42c-6fe2-441c-8c8c-71466251a162
ctx->nx only got ORed, but never reset. So when one page in the
lifetime of the VM was ever NX, all later pages were too.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6755 c046a42c-6fe2-441c-8c8c-71466251a162
The current implementation masks some MSR bits from SRR1 as it is
given on rfi(d). This looks pretty wrong and breaks Altivec.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6754 c046a42c-6fe2-441c-8c8c-71466251a162
Mtfsf can have the L bit set, so all the register contents get stored
in FPSCR. Linux uses it, so let's implement it.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6753 c046a42c-6fe2-441c-8c8c-71466251a162
