In the secure stage 2 translation regime, the VSTCR.SW and VTCR.NSW
bits can invert the secure flag for pagetable walks. This patchset
allows S1_ptw_translate() to change the non-secure bit.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-11-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VTTBR write callback so far assumes that the underlying VM lies in
non-secure state. This handles the secure state scenario.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-10-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds the MMU indices for EL2 stage 1 in secure state.
To keep code contained, which is largelly identical between secure and
non-secure modes, the MMU indices are reassigned. The new assignments
provide a systematic pattern with a non-secure bit.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-8-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With the ARMv8.4-SEL2 extension, EL2 is a legal exception level in
secure mode, though it can only be AArch64.
This patch adds the target EL for exceptions from 64-bit S-EL2.
It also fixes the target EL to EL2 when HCR.{A,F,I}MO are set in secure
mode. Those values were never used in practice as the effective value of
HCR was always 0 in secure mode.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-7-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-6-remi.denis.courmont@huawei.com
[PMM: tweaked commit message to match reduced scope of patch
following rebase]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a common helper to compute the effective value of MDCR_EL2.
That is the actual value if EL2 is enabled in the current security
context, or 0 elsewise.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-5-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will simplify accessing HCR conditionally in secure state.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-4-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not assume that EL2 is available in and only in non-secure context.
That equivalence is broken by ARMv8.4-SEL2.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-3-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This checks if EL2 is enabled (meaning EL2 registers take effects) in
the current security context.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-2-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In this context, the HCR value is the effective value, and thus is
zero in secure mode. The tests for HCR.{F,I}MO are sufficient.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210112104511.36576-1-remi.denis.courmont@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The interface for object_property_add_bool is simpler,
making the code easier to understand.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The crypto overhead of emulating pauth can be significant for
some workloads. Add two boolean properties that allows the
feature to be turned off, on with the architected algorithm,
or on with an implementation defined algorithm.
We need two intermediate booleans to control the state while
parsing properties lest we clobber ID_AA64ISAR1 into an invalid
intermediate state.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-3-richard.henderson@linaro.org
[PMM: fixed docs typo, tweaked text to clarify that the impdef
algorithm is specific to QEMU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without hardware acceleration, a cryptographically strong
algorithm is too expensive for pauth_computepac.
Even with hardware accel, we are not currently expecting
to link the linux-user binaries to any crypto libraries,
and doing so would generally make the --static build fail.
So choose XXH64 as a reasonably quick and decent hash.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The public API is now defined in
hw/semihosting/common-semi.h. do_common_semihosting takes CPUState *
instead of CPUARMState *. All internal functions have been renamed
common_semi_ instead of arm_semi_ or arm_. Aside from the API change,
there are no functional changes in this patch.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210107170717.2098982-3-keithp@keithp.com>
Message-Id: <20210108224256.2321-14-alex.bennee@linaro.org>
This commit renames two files which provide ARM semihosting support so
that they can be shared by other architectures:
1. target/arm/arm-semi.c -> hw/semihosting/common-semi.c
2. linux-user/arm/semihost.c -> linux-user/semihost.c
The build system was modified use a new config variable,
CONFIG_ARM_COMPATIBLE_SEMIHOSTING, which has been added to the ARM
softmmu and linux-user default configs. The contents of the source
files has not been changed in this patch.
Signed-off-by: Keith Packard <keithp@keithp.com>
[AJB: rename arm-compat-semi, select SEMIHOSTING]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210107170717.2098982-2-keithp@keithp.com>
Message-Id: <20210108224256.2321-13-alex.bennee@linaro.org>
While GDB can work with any XML description given to it there is
special handling for SVE registers on the GDB side which makes the
users life a little better. The changes aren't that major and all the
registers save the $vg reported the same. All that changes is:
- report org.gnu.gdb.aarch64.sve
- use gdb nomenclature for names and types
- minor re-ordering of the types to match reference
- re-enable ieee_half (as we know gdb supports it now)
- $vg is now a 64 bit int
- check $vN and $zN aliasing in test
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luis Machado <luis.machado@linaro.org>
Message-Id: <20210108224256.2321-11-alex.bennee@linaro.org>
gdb_exit() has never needed anything from env and I doubt we are going
to start now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210108224256.2321-8-alex.bennee@linaro.org>
In commit cd8be50e58 we converted the A32 coprocessor
insns to decodetree. This accidentally broke XScale/iWMMXt insns,
because it moved the handling of "cp insns which are handled
by looking up the cp register in the hashtable" from after the
call to the legacy disas_xscale_insn() decode to before it,
with the result that all XScale/iWMMXt insns now UNDEF.
Update valid_cp() so that it knows that on XScale cp 0 and 1
are not standard coprocessor instructions; this will cause
the decodetree trans_ functions to ignore them, so that
execution will correctly get through to the legacy decode again.
Cc: qemu-stable@nongnu.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20210108195157.32067-1-peter.maydell@linaro.org
When FEAT_MTE is implemented, the AArch64 view of CTR_EL0 adds the
TminLine field in bits [37:32].
Extend the ctr field to be able to hold this context.
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20210108185154.8108-4-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AArch64 view of CLIDR_EL1 extends the ICB field to include also bit
32, as well as adding a Ttype<n> field when FEAT_MTE is implemented.
Extend the clidr field to be able to hold this context.
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20210108185154.8108-3-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds for the Small Translation tables extension in AArch64 state.
Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Arm CPU finalize function uses a sequence of timer_del(), timer_deinit(),
timer_free() to free the timer. The timer_deinit() step in this was always
unnecessary, and now the timer_del() is implied by timer_free(), so we can
collapse this down to simply calling timer_free().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-5-peter.maydell@linaro.org
Now that we have implemented all the features needed by the v8.1M
architecture, we can add the model of the Cortex-M55. This is the
configuration without MVE support; we'll add MVE later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201210201433.26262-5-peter.maydell@linaro.org
Implement the v8.1M FPCXT_NS floating-point system register. This is
a little more complicated than FPCXT_S, because it has specific
handling for "current FP state is inactive", and it only wants to do
PreserveFPState(), not the full set of actions done by
ExecuteFPCheck() which vfp_access_check() implements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201210201433.26262-4-peter.maydell@linaro.org
In commit 64f863baee we implemented the v8.1M FPCXT_S register,
but we got the write behaviour wrong. On read, this register reads
bits [27:0] of FPSCR plus the CONTROL.SFPA bit. On write, it doesn't
just write back those bits -- it writes a value to the whole FPSCR,
whose upper 4 bits are zeroes.
We also incorrectly implemented the write-to-FPSCR as a simple store
to vfp.xregs; this skips the "update the softfloat flags" part of
the vfp_set_fpscr helper so the value would read back correctly but
not actually take effect.
Fix both of these things by doing a complete write to the FPSCR
using the helper function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201210201433.26262-3-peter.maydell@linaro.org
In 50244cc76a we updated mte_check_fail to match the ARM
pseudocode, using the correct EL to select the TCF field.
But we failed to update MTE0_ACTIVE the same way, which led
to g_assert_not_reached().
Cc: qemu-stable@nongnu.org
Buglink: https://bugs.launchpad.net/bugs/1907137
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201221204426.88514-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is nothing within the translators that ought to be
changing the TranslationBlock data, so make it const.
This does not actually use the read-only copy of the
data structure that exists within the rx region.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing within the translators that ought to be
changing the TranslationBlock data, so make it const.
This does not actually use the read-only copy of the
data structure that exists within the rx region.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 8118f0950f "migration: Append JSON description of migration
stream" needs a JSON writer. The existing qobject_to_json() wasn't a
good fit, because it requires building a QObject to convert. Instead,
migration got its very own JSON writer, in commit 190c882ce2 "QJSON:
Add JSON writer". It tacitly limits numbers to int64_t, and strings
contents to characters that don't need escaping, unlike
qobject_to_json().
The previous commit factored the JSON writer out of qobject_to_json().
Replace migration's JSON writer by it.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201111183823.283752-8-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
For v8.1M the architecture mandates that CPUs must provide at
least the "minimal RAS implementation" from the Reliability,
Availability and Serviceability extension. This consists of:
* an ESB instruction which is a NOP
-- since it is in the HINT space we need only add a comment
* an RFSR register which will RAZ/WI
* a RAZ/WI AIRCR.IESB bit
-- the code which handles writes to AIRCR does not allow setting
of RES0 bits, so we already treat this as RAZ/WI; add a comment
noting that this is deliberate
* minimal implementation of the RAS register block at 0xe0005000
-- this will be in a subsequent commit
* setting the ID_PFR0.RAS field to 0b0010
-- we will do this when we add the Cortex-M55 CPU model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-26-peter.maydell@linaro.org
v8.1M introduces a new TRD flag in the CCR register, which enables
checking for stack frame integrity signatures on SG instructions.
Add the code in the SG insn implementation for the new behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-24-peter.maydell@linaro.org
v8.1M introduces a new TRD flag in the CCR register, which enables
checking for stack frame integrity signatures on SG instructions.
This bit is not banked, and is always RAZ/WI to Non-secure code.
Adjust the code for handling CCR reads and writes to handle this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-23-peter.maydell@linaro.org
v8.1M adds new encodings of VLLDM and VLSTM (where bit 7 is set).
The only difference is that:
* the old T1 encodings UNDEF if the implementation implements 32
Dregs (this is currently architecturally impossible for M-profile)
* the new T2 encodings have the implementation-defined option to
read from memory (discarding the data) or write UNKNOWN values to
memory for the stack slots that would be D16-D31
We choose not to make those accesses, so for us the two
instructions behave identically assuming they don't UNDEF.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-21-peter.maydell@linaro.org
In v8.1M a new exception return check is added which may cause a NOCP
UsageFault (see rule R_XLTP): before we clear s0..s15 and the FPSCR
we must check whether access to CP10 from the Security state of the
returning exception is disabled; if it is then we must take a fault.
(Note that for our implementation CPPWR is always RAZ/WI and so can
never cause CP10 accesses to fail.)
The other v8.1M change to this register-clearing code is that if MVE
is implemented VPR must also be cleared, so add a TODO comment to
that effect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-20-peter.maydell@linaro.org
In v8.1M, vector table fetch failures don't set HFSR.FORCED (see rule
R_LLRP). (In previous versions of the architecture this was either
required or IMPDEF.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-18-peter.maydell@linaro.org
In v8.0M, on exception entry the registers R0-R3, R12, APSR and EPSR
are zeroed for an exception taken to Non-secure state; for an
exception taken to Secure state they become UNKNOWN, and we chose to
leave them at their previous values.
In v8.1M the behaviour is specified more tightly and these registers
are always zeroed regardless of the security state that the exception
targets (see rule R_KPZV). Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-17-peter.maydell@linaro.org
The FPDSCR register has a similar layout to the FPSCR. In v8.1M it
gains new fields FZ16 (if half-precision floating point is supported)
and LTPSIZE (always reads as 4). Update the reset value and the code
that handles writes to this register accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-16-peter.maydell@linaro.org
Implement the new-in-v8.1M FPCXT_S floating point system register.
This is for saving and restoring the secure floating point context,
and it reads and writes bits [27:0] from the FPSCR and the
CONTROL.SFPA bit in bit [31].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-14-peter.maydell@linaro.org
Factor out the code which handles M-profile lazy FP state preservation
from full_vfp_access_check(); accesses to the FPCXT_NS register are
a special case which need to do just this part (corresponding in the
pseudocode to the PreserveFPState() function), and not the full
set of actions matching the pseudocode ExecuteFPCheck() which
normal FP instructions need to do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201119215617.29887-13-peter.maydell@linaro.org
We defined a constant name for the mask of NZCV bits in the FPCR/FPSCR
in the previous commit; use it in a couple of places in existing code,
where we're masking out everything except NZCV for the "load to Rt=15
sets CPSR.NZCV" special case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-12-peter.maydell@linaro.org
v8.1M defines a new FP system register FPSCR_nzcvqc; this behaves
like the existing FPSCR, except that it reads and writes only bits
[31:27] of the FPSCR (the N, Z, C, V and QC flag bits). (Unlike the
FPSCR, the special case for Rt=15 of writing the CPSR.NZCV is not
permitted.)
Implement the register. Since we don't yet implement MVE, we handle
the QC bit as RES0, with todo comments for where we will need to add
support later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-11-peter.maydell@linaro.org
