The current build matrix is constructed from entries listed under the
environment variable config section, as well as the general purpose
build matrix section. Move everything under the general purpose section
so it is clear at a glance what is in the matrix.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Improve the readability of the travis config by adding two blank lines
between each major section and matrix entry.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We have reached the point where the MacOSX build was regularly timing
out. So as before I've reduced the target list to "major"
architectures to try and bring the build time down. I've added an
additional MacOSX build with the latest XCode with a minimal list of
"most likely" targets on MacOS.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This enables the execution of the acceptance tests on Travis.
Because the Travis environment is based on Ubuntu Trusty, it requires
the python3-pip and python3.4-venv packages.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20181018153134.8493-4-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This gives a more useful summary, sorted by descending % coverage,
after the tests have run. The final numbers will give an idea if our
coverage is getting better or worse.
To keep the width sane we need to post process the file that the old
gcovr tool generates. This is done with a mix of sed, awk and column
in the scripts/coverage-summary.sh script.
As quite a lot of lines don't get covered at all we filter out all the
0% lines. If the file doesn't appear it is not being exercised.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Force one config to build 'out-of-tree' (object files and executables
are created in a tree outside the project source code).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Builds only require:
- dtc
- keycodemapdb
- capstone
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: drop wget cache]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
These builds are reaching regular timeouts and probably don't need to
be so widely exercised. ftrace and ust in particular are used in
conjunction with whole system profiling which makes most sense with
KVM setups, hence the native softmmu target.
We also expand simple to cover the multiple log backends while
restricting its scope to user-mode testing only.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This build is regularly timing out and even switching off linux-user
wasn't enough. Instead explicitly choose a target list of broadly the
"major" architectures. This is enough to check the gprof build
machinery works without worrying about the actual coverage results.
I did try various YAML constructs for specifying CONFIG with
continuation but couldn't get any of them to work hence the very long
line.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When configure fails in CI systems we must be able to see the contents
of the config.log file to diagnose the root cause.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
[AJB: used Eric's suggested {} form]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
GCC has moved on and so should we. We also enable apt update to ensure
we get the latest build from the toolchain PPA.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add some commentary and make the selection of Container based Trusty
build explicit. We will need to add VM builds later when using docker.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
As Travis includes Clang 5.0 in its own build environment there is no
point manually building with older Clangs. We still need to test with
the two pythons though so we leave them as minimal system only builds.
We also split the clang build into two as it often exceeds the 40
minute build time limit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Currently the default testing doesn't exercise the linux-user builds
so there is no point spending time building them. We may want to
enable a separate gcov build once linux-user testing is re-enabled
although it's likely to report very low coverage.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
As all the disabled features only affect system emulation we might as
well disable user mode to save compile time.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As the build times have risen we keep timing out. Split the default
config into system and user builds.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The log backend is the default one, we don't need to explicitly set it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The modules and co-routine builds are only really relevant to softmmu
builds and regularly timeout on Travis. Let's disable linux-user
builds here for more headroom.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
It helps ASAN to detect more leaks on coroutine stacks, and to get rid
of some extra warnings.
Before:
tests/test-coroutine -p
/basic/lifecycle
/basic/lifecycle: ==20781==WARNING: ASan doesn't fully support
makecontext/swapcontext functions and may produce false positives in
some cases!
==20781==WARNING: ASan is ignoring requested __asan_handle_no_return:
stack top: 0x7ffcb184d000; bottom 0x7ff6c4cfd000; size: 0x0005ecb50000
(25446121472)
False positive error reports may follow
For details see https://github.com/google/sanitizers/issues/189
OK
After:
tests/test-coroutine -p /basic/lifecycle
/basic/lifecycle: ==21110==WARNING: ASan doesn't fully support
makecontext/swapcontext functions and may produce false positives in
some cases!
OK
A similar work would need to be done for sigaltstack & windows fibers
to have similar coverage. Since ucontext is preferred, I didn't bother
checking the other coroutine implementations for now.
Update travis to fix the build with ASAN annotations.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180116151152.4040-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently travis declares ancient python 2.4 is desired. Update that to
2.6 which is the oldest version any targetted distros still needs. If we
just list a python 3 version at the top level this will double the
number of travis jobs we run which is unreasonable.
So arbitrarily pick the clang test matrix entries to build with python
3.0 and 3.6, to extend coverage of python versions, without increasing
job count or build time.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180116134217.8725-14-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Because global environment variables can be overridden when .travis.yml
is processed by the docker-travis target, the effect of this patch is
that docker-travis now obeys the "J=n" option.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
It's fairly easy for --disable-tcg to bitrot. Test it in our CI.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170714093016.10897-1-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The GThread implementation is not functional enough to actually
run QEMU reliably. While it was potentially useful for debugging,
we have a scripts/qemugdb/coroutine.py to enable tracing of
ucontext coroutines in GDB, so that removes the only reason for
GThread to exist.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Trusty based builds run a little slower than the main container
based ones. This is also true for the latest version of Clang. The
builds are getting very close (and occasionally run over) the 50 minute
timeout. Rather than partitioning by target I just split them into
linux-user and system builds.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Although we've reduced the matrix to avoid repeating clang builds we can
still add an additional clang build to use the latest stable version of
clang which will typically be available on current distros.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We test with both gcc and clang in order to detect cases
where clang issues warnings that gcc misses. To achieve
this though we don't need to build QEMU in multiple
different configurations. Just a single clang-on-linux
build will be sufficient, if we have an "all enabled"
config.
This cuts the number of build jobs from 21 to 16,
reducing the load imposed on shared Travis CI infra.
This will make it practical to enable jobs for other
interesting & useful configurations without DOS'ing
Travis to much.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
As it seems easy to break the ThreadSanitizer build we should defend it to
ensure that fixes get applied when it breaks. We use the Ubuntu GCC PPA
to get the latest GCC goodness.
As we need to use the -fuse-ld=gold work around we have to disable the
linux-user targets as these trip up the linker.
The make check run is also disabled for Travis but this can be
re-enabled once the check targets have been fixed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160930213106.20186-13-alex.bennee@linaro.org>
We want the travis build bot to post notifications on IRC only for the
master qemu repository and not the various forks/branches of
others. Currently there is no direct option to restrict the updates to
one repository. This is being worked upon by the developers and
tracked in https://github.com/travis-ci/travis-ci/issues/1094.
Until such time, we can use the workaround as posted in
ref. https://github.com/facebook/flow/pull/1822.
This basically creates an ecrypted string which decrypts to qemu IRC
channel only on "qemu/qemu" repo and not on the forks. This enables
the build bot to notify the IRC only for the main repo.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
On travis-ci.org, all builds fail with
/usr/include/features.h:324:11: error: unable to open bits/predefs.h
With "make docker-travis@ubuntu", they fail with
/usr/include/features.h:374:13: error: unable to open sys/cdefs.h
With "make docker-travis@fedora", finally, they fail due to sparse
not being able to parse some #pragmas in glib headers. Just kill
the thing from the CI builds.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AJB: tweak title for my OCD]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
If we want to run our docker based tests we'll need to do them on a
normal VM with docker support. Lets just enable the build on trusty for
now to check against a newer Ubuntu.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Let's ensure that block/nfs.o is built in Travis.
This patch depends on the following build fixes:
1. block/nfs: add missing #include "qapi/error.h"
2. block/nfs: add missing #include "qemu/cutils.h"
This patch also depends on Travis adding libnfs-dev to the list of
approved packages. This patch can be safely committed but will not do
anything until the Travis maintainers allow libnfs-dev to be installed.
Please see the GitHub Issue I raised here:
https://github.com/travis-ci/apt-package-whitelist/issues/2788
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The move from Travis VMs to Containers came with a upgrade from 1.5
cores to 2. The received wisdom is -j N+1 means a core can be doing work
while other threads wait for IO to complete. This is hard to test on the
Travis infrastructure but an initial before/after eyeballing seems to
confirm it is an improvement.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Travis has support for OSX builds. Making the setup work cleanly
involves a little hacking about with the .travis.yml file but rather
than make it too messy I've pushed all the "brew" install stuff into a
support script called ./scripts/macosx-brew.sh.
Currently only the default ./configure ${CONFIG} is built as I'm not
sure what extra coverage would come from the other build stanzas.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Remove the concept of TARGETS and build the complete target list for
each config combination. Now the matrix is just based on CONFIG stanzas
and we use the additional stuff for:
- things that only work on one compiler (sparse, gcov, gprof)
- combos where "make check" fails
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
As we are now running "make check" on more of the matrix it is worth
making more of an effort to reduce the overall load on Travis. I've done
a few things:
- Combining a number of the targets
- Building one target for each ancillary build
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
Travis support ccache on a cache-per-branch basis. Given not much of the
build changes between pushes as well as the duplication in each build it
seems worthwhile enabling this.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
We disable "make check" for the gthread backend as it is broken.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
We only ran make check once before it used to be an unreliable target.
It was only a stop gap measure and we should be able to revert it now.
This also stops us needing a large all-MMU build.
We disable "make check" for a couple of the extra config targets which
are currently broken.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
This moves the Travis tests from the legacy VM infrastructure (which
only seems to run 5-6 jobs at once) to the new container based approach.
The principle difference is there is no sudo in the containers so all
packages are installed using the apt add-on. This means one of the build
combinations can be dropped as it was only for checking the build with
additional packages.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
ed173cb ".travis.yml: remove "make check" from main matrix" stopped running
make check for all the Travis build targets for various reasons. It
continued to run make check on one Travis build, which builds for a big
list of all (? nearly all) our supported softmmu targets.
Unfortunately, due to a spacing / quoting error it only actually builds for
the alpha, arm, aarch64 and cris targets. Specifically, the list of
targets is split over several lines. Even with YAML folding, this will
leave spaces in the list, meaning $TARGETS won't have the value we need.
I had a look at the YAML spec and I couldn't quickly see a way of splitting
the list so that it doesn't end up with spaces, so this patch fixes the
problem by putting the whole list on one huge line.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There are problems with unreliability in "make check" which still need
to be tracked down. As the tests are broadly the same for all targets if
added one explicit target to the matrix to run it. However this does
build all softmmu targets to ensure they at least "run"
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Brian Jackson <iggy@theiggy.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A significant portion of the build time is spent initialising all the
sub-modules we use in the source tree. Often this is almost as long as
the build itself. By pre-seeding the .git/modules tree this will
hopefully improve things.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Brian Jackson <iggy@theiggy.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The Travis VMs have 1.5 cores so we might as well make some use of the
paralellism.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Brian Jackson <iggy@theiggy.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
At the same time I've grouped the $ARCH-linux-user and $ARCH-softmmu
builds together (hoping FS cache helps) and grouped all $ARCH-softmmu
only builds into one target. This reduces the build matrix slightly
which will hopefully help with build times.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
