Initialise usb-musb by passing it a DeviceState* and the offset of the
IRQs in its gpio array, rather than a plain pointer to an irq array.
This is simpler for callers and also allows us to pass in a valid parent
to usb_bus_new(), so the USB bus actually appears in the qdev tree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Identifiers with double leading underscore are reserved, so rename
__musb_irq_max so we don't encroach on reserved namespace.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch makes qemu assign a port when creating the device, not when
attaching it. For most usb devices this isn't a noticable difference
because they are in attached state all the time.
The change affects usb-host devices which live in detached state while
the real device is unplugged from the host. They have a fixed port
assigned all the time now instead of getting grabbing one on attach and
releasing it at detach, i.e. they stop floating around at the usb bus.
The change also allows to simplify usb-hub. It doesn't need the
handle_attach() callback any more to configure the downstream ports.
This can be done at device initialitation time now. The changed
initialization order (first grab upstream port, then register downstream
ports) also fixes some icky corner cases. For example it is not possible
any more to plug the hub into one of its own downstream ports.
The usb host adapters must care too. USBPort->dev being non-NULL
doesn't imply any more the device is in attached state. The host
adapters must additionally check the USBPort->dev->attached flag.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The ->complete() callback might have released the USBPacket (uhci
actually does), so we must not touch it after the callback returns.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds code to do minimal siTD handling, which is basically
just following the next pointer. This is good enougth to handle the
inactive siTDs used by FreeBSD. Active siTDs are skipped too as we
don't have split transfer support in qemu, additionally a warning is
printed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
No change to the CPU kinds, so SMP will only work if
manually changing the cpu to 34Kf:
-cpu 34Kf -smp 2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Add a new memory space for PCI instead of using system memory.
This also fixes a bug where VGA region vga.chain4 is
accidentally mapped to 0xa0000 instead of 0x1ff000a0000.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Most changes were made using these commands:
git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/'
Whitespace in linux-user/syscall_defs.h was fixed manually
to avoid warnings from scripts/checkpatch.pl.
Manual changes were also applied to hw/pc.c.
I did not fix indentation with tabs in block/vvfat.c.
The patch will show 4 errors with scripts/checkpatch.pl.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Enabling the I/O thread by default seems like an important part of declaring
1.0. Besides allowing true SMP support with KVM, the I/O thread means that the
TCG VCPU doesn't have to multiplex itself with the I/O dispatch routines which
currently requires a (racey) signal based alarm system.
I know there have been concerns about performance. I think so far the ones that
have come up (virtio-net) are most likely due to secondary reasons like
decreased batching.
I think we ought to force enabling I/O thread early in 1.0 development and
commit to resolving any lingering issues.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Convert the tusb6010 to qdev.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This commit implements the prefetch engine feature of the GPMC
which can be used for NAND devices. This includes both interrupt
driven and DMA-filling modes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Refactor the gpmc state structure so items relating to
the prefetch engine are in their own sub-struct and have
more useful names.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
OMAP3630 adds an extra bit of address masking, so a mask of
0xb1111 is valid. Unfortunately the GPMC_REVISION is the same as
on the OMAP3430 which only has three bits of address masking, so
we have to derive this feature directly from the OMAP revision
rather than from the GPMC revision.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the OMAP 3630 to the omap_mpu_model enumeration, and add the
corresponding cpu_is_omap3630() function.
(OMAP3 isn't supported yet but this is useful in upgrading common
components to be "OMAP3 ready". We already have this for OMAP3430.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support accesses to NAND devices, both by mapping them into
the GPMC address space, and via the NAND_COMMAND, NAND_ADDRESS
and NAND_DATA GPMC registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Take a pointer to the omap mpu state struct in omap_gpmc_init.
Some details of GPMC behaviour depend on the OMAP version we
are a part of.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The OMAP3 TRM is inconsistent about whether the GPMC FIFOTHRESHOLDSTATUS
bit should be set when FIFOPOINTER > FIFOTHRESHOLD or when it is >=
FIFOTHRESHOLD. Apparently the underlying functional spec from which
the TRM was created states that the behaviour is ">=", and this also
makes more conceptual sense.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The omap_gpmc wasn't actually wiring up its IRQ, so
anything that provoked an interrupt would be using
uninitialised data for its IRQ number.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a bug in the handling of writes to GPMC_IRQSTATUS:
it behaves as "write one to clear, writing zero is ignored".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Refactor the omap_gpmc_cs_map/unmap functions:
* take the omap_gpmc_s* and a chipselect id rather than the
omap_gpmc_cs_file_s*, so they have access to the general gpmc
member fields
* extract the base and mask from the config registers in the functions
rather than at every callsite
* check for CSVALID in the functions rather than at every callsite
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that all callers of omap_gpmc_attach pass in a MemoryRegion*,
we can remove the base_update and unmap function pointer arguments,
and the opaque pointer that was passed into these callbacks.
We can also remove the base and size fields from omap_gpmc_cs_file_s
as these are no longer necessary (you don't need the base/size
to unmap a MemoryRegion the way you did to undo a mapping made
with cpu_register_physical_memory()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Minor whitespace-only cleanup (separated out from the qdevifying
patch for clarity).
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Qdevify the ONENAND device.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Refactor onenand_command() -- since it is essentially a method of
the device object, it doesn't make sense to pass in something as
an argument which is one of the object's own member fields.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a sysbus_mmio_get_region() which allows users of sysbus
devices to turn a (SysBusDevice*, mmioidx) tuple into a
MemoryRegion*. This enables some useful simplifications of
devices which pass through another device's mmio region
(either directly or by implementing some kind of memory
controller device).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The a7 area was set up as an alias of itself, rather than the p4 area. This
sent the memory core into infinite recursion.
Fix by aliasing the a7 area to the p4 area.
Signed-off-by: Avi Kivity <avi@redhat.com>
clear interrupt request if the interrupt priority < CPU pil
clear hardware interrupt request if interrupts are disabled
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
[blauwirbel@gmail.com: added a comment about magic 2]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Extract G364 ROM contents from device emulation to machine emulation,
so device emulation can be reused in other machines (Commodore Amiga)
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When the vhost notifier is disabled, the userspace handler runs
immediately: virtio_pci_set_host_notifier_internal might
call virtio_queue_notify_vq.
Since the VQ state and the tap backend state aren't
recovered yet, this causes
"Guest moved used index from XXX to YYY" assertions.
The solution is to split out host notifier handling
from vhost VQ setup and disable notifiers as our last step
when we stop vhost-net. For symmetry enable them first thing
on start.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 8ef9ea85a2, reversing
changes made to 444dc48298.
From Avi:
Please revert the entire pull (git revert 8ef9ea85a2) while I work this
out - it isn't trivial.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some gcc versions do not properly detect that all possible cases are
covered and base and size are always initialized. Please gcc by defining
a pseudo default case.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Decouple the I/O accounting from bdrv_aio_readv/writev/flush and
make the hardware models call directly into the accounting helpers.
This means:
- we do not count internal requests from image formats in addition
to guest originating I/O
- we do not double count I/O ops if the device model handles it
chunk wise
- we only account I/O once it actuall is done
- can extent I/O accounting to synchronous or coroutine I/O easily
- implement I/O latency tracking easily (see the next patch)
I've conveted the existing device model callers to the new model,
device models that are using synchronous I/O and weren't accounted
before haven't been updated yet. Also scsi hasn't been converted
to the end-to-end accounting as I want to defer that after the pending
scsi layer overhaul.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
