The Makefile of the s390-ccw bios does not handle dependencies of the
*.c files from the headers yet, so that you often have to run a "make
clean" to get the build right when one of the headers has been changed.
Let's make sure that we generate and include dependency files for all
*.c files now to avoid this problem in the future.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200630142955.7662-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's make it a bit more clear that we check the full 64 bits to fit
into the 32 we return.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200624075226.92728-11-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Why should we do conversion of a ebcdic value if we have a handy table
where we could look up the ascii value instead?
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200624075226.92728-10-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
panic() was defined for the ccw and net bios, i.e. twice, so it's
cleaner to rather put it into the header.
Also let's add an infinite loop into the assembly of disabled_wait() so
the caller doesn't need to take care of it.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200624075226.92728-9-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's move some of the PSW mask defines into s390-arch.h and use them
in jump2ipl.c. Also let's introduce a new constant for the address
mask of 8 byte (short) PSWs.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200624075226.92728-8-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This constant enables 64 bit addressing, not the ESAME architecture,
so it shouldn't be named ZMODE.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200624075226.92728-7-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If we have a lowcore struct that has members for offsets that we want
to touch, why not use it?
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200624075226.92728-5-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
They are definitely helper functions.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200624075226.92728-4-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's consolidate timing related functions into one header.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200624075226.92728-3-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's initialize the structs at the beginning to ease reading and also
zeroing all other fields. This also makes the compiler stop
complaining about sense_id_ccw.flags being ored into when it's not
initialized.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200624075226.92728-2-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):
--v-- description start --v--
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to
declare variable-length types such as these ones is a flexible
array member [1], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler
warning in case the flexible array does not occur last in the
structure, which will help us prevent some kind of undefined
behavior bugs from being unadvertenly introduced [2] to the
Linux codebase from now on.
--^-- description end --^--
Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).
All these instances of code were found with the help of the
following Coccinelle script:
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
};
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
} QEMU_PACKED;
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1
Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The POP states that for a list directed IPL the IPLB is stored into
memory by the machine loader and its address is stored at offset 0x14
of the lowcore.
ZIPL currently uses the address in offset 0x14 to access the IPLB and
acquire flags about secure boot. If the IPLB address points into
memory which has an unsupported mix of flags set, ZIPL will panic
instead of booting the OS.
As the lowcore can have quite a high entropy for a guest that did drop
out of protected mode (i.e. rebooted) we encountered the ZIPL panic
quite often.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20200304114231.23493-19-frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We need to set the short psw indication bit in the reset psw, as it is
a short psw.
Exposed by "s390x: Properly fetch and test the short psw on diag308
subc 0/1".
Fixes: 9629823290 ("pc-bios/s390-ccw: do a subsystem reset before running the guest")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20191203132813.2734-5-frankja@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The existing s390 bios gets the LOADPARM information from the system using
an SCLP call that specifies a buffer length too small to contain all the
output.
The recent fixes in the SCLP code have exposed this bug, since now the
SCLP call will return an error (as per architecture) instead of
writing partially and completing successfully.
The solution is simply to specify the full page length as the SCCB
length instead of a smaller size.
Fixes: 832be0d8a3 ("s390x: sclp: Report insufficient SCCB length")
Fixes: 9a22473c70 ("pc-bios/s390-ccw: get LOADPARM stored in SCP Read Info")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <1574944437-31182-1-git-send-email-imbrenda@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is a possible memory leak in get_uuid(). Should free allocated mem
before
return NULL.
Signed-off-by: Yifan Luo <luoyifan@cmss.chinamobile.com>
Message-Id: <02cf01d55267$86cf2850$946d78f0$@cmss.chinamobile.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since commit 339686a358 ("pc-bios/s390-ccw:
zero out bss section"), we are clearing now the BSS in start.S, so there
is no need to pre-initialize the loadparm_str array with zeroes anymore.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Newer versions of zipl have the ability to write signature entries to the boot
script for secure boot. We don't yet support secure boot, but we need to skip
over signature entries while reading the boot script in order to maintain our
ability to boot guest operating systems that have a secure bootloader.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <1556543381-12671-1-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
atoui() and get_index() pass char values to isdigit(). With a
standard isdigit(), we'd get undefined behavior when the value is
negative. Can't happen as char is unsigned on s390x. Even if it
ould, we're actually using isdigit() from pc-bios/s390-ccw/libc.h
here, which works fine for negative values. Clean up anyway, just
to avoid setting a bad example.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190418145355.21100-6-armbru@redhat.com>
[thuth: updated the commit message]
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the user does not specify which device to boot from then we end
up guessing. Instead of simply grabbing the first available device let's
be a little bit smarter and only choose devices that might be bootable
like disk, and not console devices.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <1554388475-18329-17-git-send-email-jjherne@linux.ibm.com>
[thuth: Added fix for virtio_is_supported() not being called anymore]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Allows guest to boot from a vfio configured real dasd device.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-16-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The dasd IPL procedure needs to execute a few previously unused
channel commands. Let's define them and their associated data
structures.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-15-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The boot method is different depending on which device type we are
booting from. Let's examine the control unit type to determine if we're
a virtio device. We'll eventually add a case to check for a real dasd device
here as well.
Since we have to call enable_subchannel() in main now, might as well
remove that call from virtio.c : run_ccw(). This requires adding some
additional enable_subchannel calls to not break calls to
virtio_is_supported().
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-14-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we have a Channel I/O library let's modify virtio boot code to
make use of it for running channel programs.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-13-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Make a new routine find_boot_device to locate the boot device for all
cases, not just virtio.
The error message for the case where no boot device has been specified
and a suitable boot device cannot be auto detected was specific to
virtio devices. We update this message to remove virtio specific wording.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-12-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We need a method for finding the subchannel of a dasd device. Let's
modify find_dev to handle this since it mostly does what we need. Up to
this point find_dev has been specific to only virtio devices.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-11-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add verbose error output for when unexpected i/o errors happen. This eases the
burden of debugging and reporting i/o errors. No error information is printed
in the success case, here is an example of what is output on error:
cio device error
ssid : 0x0000000000000000
cssid : 0x0000000000000000
sch_no: 0x0000000000000000
Interrupt Response Block Data:
Function Ctrl : [Start]
Activity Ctrl : [Start-Pending]
Status Ctrl : [Alert] [Primary] [Secondary] [Status-Pending]
Device Status : [Unit-Check]
Channel Status :
cpa=: 0x000000007f8d6038
prev_ccw=: 0x0000000000000000
this_ccw=: 0x0000000000000000
Eckd Dasd Sense Data (fmt 32-bytes):
Sense Condition Flags :
Residual Count =: 0x0000000000000000
Phys Drive ID =: 0x000000000000009e
low cyl address =: 0x0000000000000000
head addr & hi cyl =: 0x0000000000000000
format/message =: 0x0000000000000008
fmt-dependent[0-7] =: 0x0000000000000004
fmt-dependent[8-15]=: 0xe561282305082fff
prog action code =: 0x0000000000000016
Configuration info =: 0x00000000000040e0
mcode / hi-cyl =: 0x0000000000000000
cyl & head addr [0]=: 0x0000000000000000
cyl & head addr [1]=: 0x0000000000000000
cyl & head addr [2]=: 0x0000000000000000
The Sense Data section is currently only printed for ECKD DASD.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-10-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Introduce a library function for executing format-0 and format-1
channel programs and waiting for their completion before continuing
execution.
Add cu_type() to channel io library. This will be used to query control
unit type which is used to determine if we are booting a virtio device or a
real dasd device.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <1554388475-18329-9-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Introduce inline functions to convert between pointers and unsigned 32-bit
ints. These are used to hide the ugliness required to avoid compiler
warnings.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-8-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Create a new header for basic architecture specific definitions and add a
mapping of low core memory. This mapping will be used by the real dasd boot
process.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-7-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Create a separate library for channel i/o related code. This decouples
channel i/o operations from virtio and allows us to make use of them for
the real dasd boot path.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-6-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add proper typedefs to all structs and modify all bit fields to use consistent
formatting.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-5-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Create a boot_setup function to handle getting boot information from
the machine/hypervisor. This decouples common boot logic from the
virtio code path and allows us to make use of it for the real dasd boot
scenario.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-4-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Move channel i/o setup code out to a separate function. This decouples cio
setup from the virtio code path and allows us to make use of it for booting
dasd devices.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-3-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling the s390-ccw firmware with Clang 7.0.1, I get the
following errors:
pc-bios/s390-ccw/start.S:62:19: error: invalid use of length addressing
stctg 0,0,0(15)
^
pc-bios/s390-ccw/start.S:63:12: error: invalid use of length addressing
oi 6(15), 0x2
^
pc-bios/s390-ccw/start.S:64:19: error: invalid use of length addressing
lctlg 0,0,0(15)
^
pc-bios/s390-ccw/start.S:76:19: error: invalid use of length addressing
stctg 0,0,0(15)
^
pc-bios/s390-ccw/start.S:77:12: error: invalid use of length addressing
ni 6(15), 0xfd
^
pc-bios/s390-ccw/start.S:78:19: error: invalid use of length addressing
lctlg 0,0,0(15)
^
pc-bios/s390-ccw/start.S:79:12: error: invalid operand for instruction
br 14
^
Let's use proper register names like in the rest of this file to fix it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1547123559-30476-1-git-send-email-thuth@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The -O2 optimization flag is passed via CFLAGS to the firmware Makefile,
but in netbook.mak, we've got some rules that only use QEMU_CFLAGS for
compiling the libc and libnet from SLOF, so these files get compiled
without optimization so far. Use CFLAGS here, too, to create faster
and smaller code.
We can additionally save some more bytes in the firmware images by compi-
ling the code with -fno-asynchronous-unwind-tables. This will omit some
ELF sections (used for stack unwinding for example) from the image that
we do not need in the firmware.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
With the STSI instruction, we can get the UUID of the current VM instance,
so we can support loading pxelinux config files via UUID in the file name,
too.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since it is quite cumbersome to manually create a combined kernel with
initrd image for network booting, we now support loading via pxelinux
configuration files, too. In these files, the kernel, initrd and command
line parameters can be specified seperately, and the firmware then takes
care of glueing everything together in memory after the files have been
downloaded. See this URL for details about the config file layout:
https://www.syslinux.org/wiki/index.php?title=PXELINUX
The user can either specify a config file directly as bootfile via DHCP
(but in this case, the file has to start either with "default" or a "#"
comment so we can distinguish it from binary kernels), or a folder (i.e.
the bootfile name must end with "/") where the firmware should look for
the typical pxelinux.cfg file names, e.g. based on MAC or IP address.
We also support the pxelinux.cfg DHCP options 209 and 210 from RFC 5071.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The ip_version information now has to be stored in the filename_ip_t
structure, and there is now a common function called tftp_get_error_info()
which can be used to get the error string for a TFTP error code.
We can also get rid of some superfluous "(char *)" casts now.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Loadparm is defined by the s390 architecture to be 8 bytes
in length. Let's define this size in the s390-ccw bios.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
I've run into a compilation error today with the current version of GCC 8:
In file included from s390-ccw.h:49,
from main.c:12:
cio.h:128:1: error: alignment 1 of 'struct tpi_info' is less than 4 [-Werror=packed-not-aligned]
} __attribute__ ((packed));
^
cc1: all warnings being treated as errors
Since the struct tpi_info contains an element ("struct subchannel_id schid")
which is marked as aligned(4), we've got to mark the struct tpi_info as
aligned(4), too.
CC: qemu-stable@nongnu.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525774672-11913-1-git-send-email-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We currently pass an integer as the subcode parameter. However,
the upper bits of the register containing the subcode need to
be 0, which is not guaranteed unless we explicitly specify the
subcode to be an unsigned long value.
Fixes: d046c51dad ("pc-bios/s390-ccw: Get device address via diag 308/6")
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The .INS config files can normally be found on CD-ROM ISO images,
so by supporting these files, it is now possible to boot directly
when the TFTP server is set up with the contents of such an CD-ROM
image.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The netboot firmware so far simply jumped directly into the OS kernel
after the download has been completed. This, however, bears the risk
that the virtio-net device still might be active in the background and
incoming packets are still placed into the buffers - which could destroy
memory of the now-running Linux kernel in case it did not take over the
device fast enough. Also the SCLP console is not put into a well-defined
state here. We should hand over the system in a clean state when jumping
into the kernel, so let's use the same mechanism as it's done in the
main s390-ccw firmware and reset the machine with diag308 into a clean
state before jumping into the OS kernel code. To be able to share the
code with the main s390-ccw firmware, the related functions are now
extracted from bootmap.c into a new file called jump2ipl.c.
Since we now also set the boot device schid at address 184 for the network
boot device, this patch also slightly changes the way how we detect the
entry points for non-ELF binary images: The code now looks for the "S390EP"
magic first and then jumps to 0x10000 in case it has been found. This is
necessary for booting from network devices, since the normal kernel code
(where the PSW at ddress 0 points to) tries to do a block load from the
boot device. This of course fails for a virtio-net device and causes the
kernel to abort with a panic-PSW silently.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When we want to support pxelinux-style network booting later, we've got
to do several TFTP transfers - and we do not want to apply for a new IP
address via DHCP each time. So split up net_load into three parts:
1. net_init(), which initializes virtio-net, gets an IP address via DHCP
and prints out the related information.
2. The tftp_load call is now moved directly into the main() function
3. A new net_release() function which should tear down the network stack
before we are done in the firmware.
This will make it easier to extend the code in the next patches.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
zIPL boot menu entries can be non-sequential. Let's account
for this issue for the s390 enumerated boot menu. Since we
can no longer print a range of available entries to the
user, we have to present a list of each available entry.
An example of this menu:
s390-ccw Enumerated Boot Menu.
[0] default
[1]
[2]
[7]
[8]
[9]
[11]
[12]
Please choose:
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
zIPL boot menu entries can be non-sequential. Let's account
for this issue for the s390 zIPL boot menu. Since this boot
menu is actually an imitation and is not completely capable
of everything the real zIPL menu can do, let's also print a
different banner to the user.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Rename the loadparm char array in main.c to loadparm_str and
increased the size by one byte to account for a null termination
when converting the loadparm string to an int via atoui. We
also allow the boot menu to be enabled when loadparm is set to
an empty string or a series of spaces.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The MAX_TABLE_ENTRIES constant has a name that is too generic. As we
want to declare a limit for boot menu entries, let's rename it to a more
fitting MAX_BOOT_ENTRIES and set its value to 31 (30 boot entries and
1 default entry). Also we move it from bootmap.h to s390-ccw.h to make
it available for menu.c in a later patch.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
"size_t" should be an unsigned type according to the C standard.
Thus we should also use this convention in the s390-ccw firmware to avoid
confusion. I checked the sources, and apart from one spot in libc.c, the
code should all be fine with this change.
Buglink: https://bugs.launchpad.net/qemu/+bug/1753437
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
IPL over a virtio-scsi device requires special handling not
available in the real architecture. For this purpose the IPL
type 0xFF has been chosen as means of communication between
QEMU and the pc-bios. However, a guest OS could be confused
by seeing an unknown IPL type.
This change sets the IPL parameter type to 0x02 (CCW) to prevent
this. Pre-existing Linux has looked up the IPL parameters only in
the case of FCP IPL. This means that the behavior should stay
the same even if Linux checks for the IPL type unconditionally.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1522940844-12336-4-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The current timeout is set to only three seconds - and considering that
vring_wait_reply() or rather get_second() is not doing any rounding,
the real timeout is likely rather 2 seconds in most cases. When the
host is really badly loaded, it's possible that we hit this timeout by
mistake; it's even more likely if we run the guest in TCG mode instead
of KVM.
So let's increase the timeout to 30 seconds instead to ease this situation
(30 seconds is also the timeout that is used by the Linux SCSI subsystem
for example, so this seems to be a sane value for block IO timeout).
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1549079
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1522316251-16399-1-git-send-email-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
[CH: tweaked commit message]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
bootmap.h can currently only be included once - otherwise the linker
complains about multiple definitions of the "magic" strings. It's a
bad style to define string arrays in header files, so let's better
move these to the bootmap.c file instead where they are used.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1520317081-5341-1-git-send-email-thuth@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Interactive boot menu for scsi. This follows a similar procedure
as the interactive menu for eckd dasd. An example follows:
s390x Enumerated Boot Menu.
3 entries detected. Select from index 0 to 2.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Added additional "break;" statement to avoid analyzer warnings]
Signed-off-by: Thomas Huth <thuth@redhat.com>
If no boot menu options are present, then flag the boot menu to
use the zipl options that were set in the zipl configuration file
(and stored on disk by zipl). These options are found at some
offset prior to the start of the zipl boot menu banner. The zipl
timeout value is limited to a 16-bit unsigned integer and stored
as seconds, so we take care to convert it to milliseconds in order
to conform to the rest of the boot menu functionality. This is
limited to CCW devices.
For reference, the zipl configuration file uses the following
fields in the menu section:
prompt=1 enable the boot menu
timeout=X set the timeout to X seconds
To explicitly disregard any boot menu options, then menu=off or
<bootmenu enable='no' ... /> must be specified.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It is possible while waiting for multiple types of external
interrupts that we might have pending irqs remaining between
irq consumption and irq-type disabling. Those interrupts
could potentially propagate to the guest after IPL completes
and cause unwanted behavior.
As it is today, the SCLP will only recognize write events that
are enabled by the control program's send and receive masks. To
limit the window for, and prevent further irqs from, ASCII
console events (specifically keystrokes), we should only enable
the control program's receive mask when we need it.
While we're at it, remove assignment of the (non control program)
send and receive masks, as those are actually set by the SCLP.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Implements an sclp_read function to capture input from the
console and a wrapper function that handles parsing certain
characters and adding input to a buffer. The input is checked
for any erroneous values and is handled appropriately.
A prompt will persist until input is entered or the timeout
expires (if one was set). Example:
Please choose (default will boot in 10 seconds):
Correct input will boot the respective boot index. If the
user's input is empty, 0, or if the timeout expires, then
the default zipl entry will be chosen. If the input is
within the range of available boot entries, then the
selection will be booted. Any erroneous input will cancel
the timeout and re-prompt the user.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the boot menu options are present and the guest's
disk has been configured by the zipl tool, then the user
will be presented with an interactive boot menu with
labeled entries. An example of what the menu might look
like:
zIPL v1.37.1-build-20170714 interactive boot menu.
0. default (linux-4.13.0)
1. linux-4.13.0
2. performance
3. kvm
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Read the stage2 boot loader data block-by-block. We scan the
current block for the string "zIPL" to detect the start of the
boot menu banner. We then load the adjacent blocks (previous
block and next block) to account for the possibility of menu
data spanning multiple blocks.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reads boot menu flag and timeout values from the iplb and
sets the respective fields for the menu.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Set boot menu options for an s390 guest and store them in
the iplb. These options are set via the QEMU command line
option:
-boot menu=on|off[,splash-time=X]
or via the libvirt domain xml:
<os>
<bootmenu enable='yes|no' timeout='X'/>
</os>
Where X represents some positive integer representing
milliseconds.
Any value set for loadparm will override all boot menu options.
If loadparm=PROMPT, then the menu will be enabled without a
timeout.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The s390-ccw firmware needs some information in support of the
boot process which is not available on the native machine.
Examples are the netboot firmware load address and now the
boot menu parameters.
While storing that data in unused fields of the IPL parameter block
works, that approach could create problems if the parameter block
definition should change in the future. Because then a guest could
overwrite these fields using the set IPLB diagnose.
In fact the data in question is of more global nature and not really
tied to an IPL device, so separating it is rather logical.
This commit introduces a new structure to hold firmware relevant
IPL parameters set by QEMU. The data is stored at location 204 (dec)
and can contain up to 7 32-bit words. This area is available to
programming in the z/Architecture Principles of Operation and
can thus safely be used by the firmware until the IPL has completed.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
[thuth: fixed "4 + 8 * n" comment]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Moved:
memcmp from bootmap.h to libc.h (renamed from _memcmp)
strlen from sclp.c to libc.h (renamed from _strlen)
Added C standard functions:
isdigit
Added non C-standard function:
uitoa
atoui
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
ECKD DASDs have different IPL structures for CDL and LDL
formats. The current Ipl1 and Ipl2 structs follow the CDL
format, so we prepend "EckdCdl" to them. Boot info for LDL
has been moved to a new struct: EckdLdlIpl1.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add new cylinder/head/sector struct. Use it to calculate
eckd block numbers instead of a BootMapPointer (which used
eckd chs anyway).
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some ECKD bootmap code was using structs designed for SCSI.
Even though this works, it confuses readability. Add a new
BootMapTable struct to assist with readability in bootmap
entry code. Also:
- replace ScsiMbr in ECKD code with appropriate structs
- fix read_block messages to reflect BootMapTable
- fixup ipl_scsi to use BootMapTable (referred to as Program Table)
- defined value for maximum table entries
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The QEMU ELF loader does not zero the bss segment.
This resulted in several bugs, e.g. see
commit 5d739a4787 (s390-ccw.img: Fix sporadic errors with ccw boot image - initialize css)
commit 6a40fa2669d3 (s390-ccw.img: Initialize next_idx)
commit 8775d91a0f (pc-bios/s390-ccw: Fix problem with invalid virtio-scsi LUN when rebooting)
Let's fix this once and forever by letting the BIOS zero the bss itself.
Suggested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20171122142627.73170-3-borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When rebooting a guest that has a virtio-scsi disk, the s390-ccw
bios sometimes bails out with an error message like this:
! SCSI cannot report LUNs: STATUS=02 RSPN=70 KEY=05 CODE=25 QLFR=00, sure !
Enabling the scsi_req* tracing in QEMU shows that the ccw bios is
trying to execute the REPORT LUNS SCSI command with a LUN != 0, and
this causes the SCSI command to fail.
Looks like we neither clear the BSS of the s390-ccw bios during reboot,
nor do we explicitly set the default_scsi_device.lun value to 0, so
this variable can contain random values from the OS after the reboot.
By setting this variable explicitly to 0, the problem is fixed and
the reboots always succeed.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1514352
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1510942228-22822-1-git-send-email-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The sclp console in the s390 bios writes raw data,
leading console emulators (such as virsh console) to
treat a new line ('\n') as just a new line instead
of as a Unix line feed. Because of this, output
appears in a "stair case" pattern.
Let's print \r\n on every occurrence of a new line
in the string passed to write to amend this issue.
This is in sync with the guest Linux code in
drivers/s390/char/sclp_vt220.c which also does a line feed
conversion in the console part of the driver.
This fixes the s390-ccw and s390-netboot output like
$ virsh start test --console
Domain test started
Connected to domain test
Escape character is ^]
Network boot starting...
Using MAC address: 02:01:02:03:04:05
Requesting information via DHCP: 010
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Message-Id: <1509120893-28054-1-git-send-email-walling@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Setting the client architecture DHCP option to 0x001f (s390 Basic) [1]
allows the DHCP server to return a s390-specific bootfile if wanted.
DHCP servers not configured for the option (or not yet recognizing the
option value) will continue to work as they have done before.
[1] https://www.iana.org/assignments/dhcpv6-parameters
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1505126027-1704-1-git-send-email-mihajlov@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The commit 198c0d1f9d s390x/css: check ccw address validity
exposes an alignment issue in ccw bios.
According to PoP the CCW must be doubleword aligned. Let's fix
this in the bios.
Cc: qemu-stable@nongnu.org
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <3ed8b810b6592daee6a775037ce21f850e40647d.1503667215.git.alifm@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This reverts a change that replaced the "rm -f" command with the
undefined variable RM (expected to be set by make), and causes the
"make clean" command to fail for a s390 target:
make[1]: Entering directory '/usr/src/qemu/build/pc-bios/s390-ccw'
rm -f *.timestamp
*.o *.d *.img *.elf *~ *.a
/bin/sh: *.o: command not found
Makefile:39: recipe for target 'clean' failed
make[1]: *** [clean] Error 127
make[1]: Leaving directory '/usr/src/qemu/build/pc-bios/s390-ccw'
Makefile:489: recipe for target 'clean' failed
make: *** [clean] Error 1
Fixes: 3e4415a751 ("pc-bios/s390-ccw: Add core files for the network
bootloading program")
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170814204450.24118-2-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Most of the code has been taken from SLOF's netload.c file. Now we
can finally load an image via TFTP and execute the downloaded kernel.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-12-git-send-email-thuth@redhat.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The driver provides the recv() and send() functions which will
be required by SLOF's libnet code for receiving and sending
packets.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-11-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This is just a preparation for the next steps: Add a makefile and a
stripped down copy of pc-bios/s390-ccw/main.c as a basis for the network
bootloader program, linked against the libc from SLOF already (which we
will need for SLOF's libnet). The networking code is not included yet.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-10-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The upcoming virtio-net driver needs to negotiate some features,
so we need the possibility to do this in the core virtio code.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-8-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Looks like they have never been used, so let's simply remove them.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-7-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We'll need them in code that is not related to bootmap.h, so
they should reside in an independent header.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-6-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The stdio functions from the SLOF libc need a write() function for
printing text to stdout/stderr. Let's implement this function by
refactoring the code from sclp_print().
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-5-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The netboot code is going to link against the code from virtio.c, too, so
we've got to move the virtio-block and -scsi related code out of the way.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-4-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We will later need this array in a file that we will link to the
netboot code, too. Since there is some ebcdic conversion done
in sclp_get_loadparm_ascii(), the sclp.c file seems to be a good
candidate.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-3-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The upcoming netboot code will use the libc from SLOF. To be able
to still use s390-ccw.h there, the libc related functions in this
header have to be moved to a different location.
And while we're at it, remove the duplicate memcpy() function from
sclp.c.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-2-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The docker-run-test-build@debian-s390x-cross target fails with:
strip --strip-unneeded s390-ccw.elf -o s390-ccw.img
strip: Unable to recognise the format of the input file `s390-ccw.elf'
The configure script defines a STRIP makefile variable whose default
value is ${cross_prefix}strip. Let's use it.
We default to using the non-prefixed strip command in case --enable-debug
or --disable-strip was passed to configure during a regular build.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <149623617700.4947.12490877660892961664.stgit@bahia.lan>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Now that we've read all the possible limits that have been defined for
a virtio-scsi controller and the disk we're booting from, it's possible
that we are STILL going to exceed the limits of the host device.
For example, a "-device scsi-generic" device does not support the
Block Limits VPD page.
So, let's fallback to something that seems to work for most boot
configurations if larger values were specified (including if nothing
was explicitly specified, and we took default values).
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170510155359.32727-8-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The "Block Limits" Inquiry VPD page is optional for any SCSI device,
but if it's supported it provides a hint of the maximum I/O transfer
length for this particular device. If this page is supported by the
disk, let's issue that Inquiry and use the minimum of it and the
SCSI controller limit. That will cover this scenario:
qemu-system-s390x ...
-device virtio-scsi-ccw,id=scsi0,max_sectors=32768 ...
-drive file=/dev/sda,if=none,id=drive0,format=raw ...
-device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,
drive=drive0,id=disk0,max_io_size=1048576
controller: 32768 sectors x 512 bytes/sector = 16777216 bytes
disk: 1048576 bytes
Now that we have a limit for a virtio-scsi disk, compare that with the
limit for the virtio-scsi controller when we actually build the I/O.
The minimum of these two limits should be the one we use.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170510155359.32727-7-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The "Supported Pages" Inquiry EVPD page is mandatory for all SCSI devices,
and is used as a gateway for what VPD pages the device actually supports.
Let's issue this Inquiry, and dump that list with the debug facility.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170510155359.32727-6-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If we want to issue any of the SCSI Inquiry EVPD pages,
which we do, we could use this function to issue both types
of commands with a little bit of refactoring.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170510155359.32727-5-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
A virtio-scsi request that goes through the host sd driver and exceeds
the maximum transfer size is automatically broken up for us. But the
equivalent request going to the sg driver presumes that any length
requirements have already been honored.
Let's use the max_sectors field on the virtio-scsi controller device,
and break up all requests (both sd and sg) to avoid this problem.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170510155359.32727-4-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Simple refactoring so that the blk_factor adjustment is
moved into virtio_scsi_read_many routine, in preparation
for another change.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Message-Id: <20170510155359.32727-3-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
When using virtio-scsi, we multiply the READ(10) data_size by
a block factor twice when building the I/O. This is fine,
since it's only 1 for SCSI disks, but let's clean it up.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20170510155359.32727-2-farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
If there is no LOADPARM given or '0' specified, then IPL the first
matched entry. Otherwise IPL the matching entry of that number.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
1. change a bit definition of ScsiMbr to allow an array of pointers
2. add loadparm fetch to boot script processing
3. apply loadparm index to boot entry selection, if any
Initial patch from Eugene (jno) Dvurechenski.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Fix SCSI bootmap interpreter to make use of any specified entry of the
Program Table using the leftmost numeric value from the LOADPARM, if specified.
Initial patch from Eugene (jno) Dvurechenski.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The LOADPARM value is fetched from SCP Read Info, but it's applied
only at the phase of bootmap interpretation. So let's read the LOARPARM
value and store it. Also provide a parsing function to detect numbers in
the LOADPARM which can be used during bootmap interpretation.
Remove a stray whitespace.
Initial patch from Eugene (jno) Dvurechenski.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Obtain the loadparm value stored in SCP Read Info by performing
a SCLP Read Info request.
Rename sclp-ascii.c to sclp.c to reflect the changed scope of
the file.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Make the ebcdic_to_ascii function public to the rest of the
"bios" code, as the volume label is no more the single thing
to be converted.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We want to use the ccw bios to start final network boot. To do
this we use ccw bios to detect if the boot device is a virtio
network device and retrieve the start address of the
network boot image.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The quiet-command make rule currently takes two arguments:
the command and arguments to run, and a string to print if
the V flag is not set (ie we are not being verbose).
By convention, the string printed is of the form
" NAME some args". Unfortunately to get nicely lined up
output all the strings have to agree about what column the
arguments should start in, which means that if we add a
new quiet-command usage which wants a slightly longer CMD
name then we either put up with misalignment or change
every quiet-command string.
Split the quiet-mode string into two, the "NAME" and
the "same args" part, and use printf(1) to format the
string automatically. This means we only need to change
one place if we want to support a longer maximum name.
In particular, we can now print 7-character names lined
up properly (they are needed for the OSX "SETTOOL" invocation).
Change all the uses of quiet-command to the new syntax.
(Any which are missed or inadvertently reintroduced
via later merges will result in slightly misformatted
quiet output rather than disaster.)
A few places in the pc-bios/ makefiles are updated to use
"BUILD", "SIGN" and "STRIP" rather than "Building",
"Signing" and "Stripping" for consistency and to keep them
below 7 characters. Module .mo links now print "LD" rather
than the nonstandard "LD -r".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
IPL should cause the IPL I/O device to become enabled. So when handling
the IPL program, we should set the E (Enable) bit. However, virtio-ccw
does not know whether it's dealing with an IPL device or not. Since
trying to perform I/O on a disabled device doesn't make any sense,
let's just always enable it. At the same time we can remove the
SCSW_FCTL_START_FUNC flag as it is ignored for msch anyway and did
not enable the device as intended.
Reported-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
[remove superfluous flag]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Since
commit a9c87304b7 ("build-sys: fix building with make CFLAGS=.. argument")
pc-bios/s390-ccw.img build might fail with
--- snip ---
main.o: In function `virtio_setup':
qemu/pc-bios/s390-ccw/main.c:117: undefined reference to `__stack_chk_fail'
--- snip ---
Changing the CFLAGS to QEMU_CFLAGS does the trick. We also need to
add -fno-strict-aliasing as this was filtered out.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1471258997-5811-1-git-send-email-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
