In commit a8d2532645 we cleaned up usage of the qemu-common.h header
so that it was always included from .c files and never from other .h files.
We missed adding it to net/tap-solaris.c (which previously was pulling it
in via tap-int.h), which broke building on Solaris hosts.
Fixes: a8d2532645
Reported-by: Michele Denber <denber@mindspring.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Michele Denber <denber@mindspring.com>
Message-Id: <20200704092317.12943-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is a small function that can get the peer
from given NetClientState and queue_index
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-2-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Now that the "name" parameter is gone, there is hardly any difference
between NetLegacy and Netdev anymore, so we can drop NetLegacy and always
use Netdev to simplify the code quite a bit.
The only two differences that were really left between Netdev and NetLegacy:
1) NetLegacy does not allow a "hubport" type. We can continue to block
this with a simple check in net_client_init1() for this type.
2) The "id" parameter was optional in NetLegacy (and an internal id
was chosen via assign_name() during initialization), but it is mandatory
for Netdev. To avoid that the visitor code bails out here, we have to
add an internal id to the QemuOpts already earlier now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It's been deprecated since QEMU v3.1, so it's time to finally
remove it. The "id" parameter can simply be used instead.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The patch is to fix the "pkt" memory leak in packet_enqueue().
The allocated "pkt" needs to be freed if the colo compare
primary or secondary queue is too big.
Replace the error_report of full queue with a trace event.
Signed-off-by: Derek Su <dereksu@qnap.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In colo_compare_complete, insert CompareState into net_compares
only after everything has been initialized.
In colo_compare_finalize, remove CompareState from net_compares
before anything is deinitialized.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If the colo-compare object is removed before failover and a
checkpoint happens, qemu crashes because it tries to lock
the destroyed event_mtx in colo_notify_compares_event.
Fix this by checking if everything is initialized by
introducing a new variable colo_compare_active which
is protected by a new mutex colo_compare_mutex. The new mutex
also protects against concurrent access of the net_compares
list and makes sure that colo_notify_compares_event isn't
active while we destroy event_mtx and event_complete_cond.
With this it also is again possible to use colo without
colo-compare (periodic mode) and to use multiple colo-compare
for multiple network interfaces.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Else the log will be flooded if there is a lot of network
traffic.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The chr_out chardev is connected to a filter-redirector
running in the main loop. qemu_chr_fe_write_all might block
here in compare_chr_send if the (socket-)buffer is full.
If another filter-redirector in the main loop want's to
send data to chr_pri_in it might also block if the buffer
is full. This leads to a deadlock because both event loops
get blocked.
Fix this by converting compare_chr_send to a coroutine and
putting the packets in a send queue.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Tested-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
qemu_bh_new will set the bh to be executed in the main
loop. This causes crashes as colo_compare_handle_event assumes
that it has exclusive access the queues, which are also
concurrently accessed in the iothread.
Create the bh with the AioContext of the iothread to fulfill
these assumptions and fix the crashes. This is safe, because
the bh already takes the appropriate locks.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Derek Su <dereksu@qnap.com>
Tested-by: Derek Su <dereksu@qnap.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The sender of packet will be checked in the qemu_net_queue_purge() but
we use NetClientState not its peer when trying to purge the incoming
queue in qemu_flush_or_purge_packets(). This will trigger the assert
in virtio_net_reset since we can't pass the sender check:
hw/net/virtio-net.c:533: void virtio_net_reset(VirtIODevice *): Assertion
`!virtio_net_get_subqueue(nc)->async_tx.elem' failed.
#9 0x55a33fa31b78 in virtio_net_reset hw/net/virtio-net.c:533:13
#10 0x55a33fc88412 in virtio_reset hw/virtio/virtio.c:1919:9
#11 0x55a341d82764 in virtio_bus_reset hw/virtio/virtio-bus.c:95:9
#12 0x55a341dba2de in virtio_pci_reset hw/virtio/virtio-pci.c:1824:5
#13 0x55a341db3e02 in virtio_pci_common_write hw/virtio/virtio-pci.c:1252:13
#14 0x55a33f62117b in memory_region_write_accessor memory.c:496:5
#15 0x55a33f6205e4 in access_with_adjusted_size memory.c:557:18
#16 0x55a33f61e177 in memory_region_dispatch_write memory.c:1488:16
Reproducer:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg701914.html
Fix by using the peer.
Reported-by: "Alexander Bulekov" <alxndr@bu.edu>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: ca77d85e1d ("net: complete all queued packets on VM stop")
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
The '\n' sneaked in by accident here, an "id" string should really
not contain a newline character at the end.
Fixes: 78cd6f7bf6 ('net: Add a new convenience option "--nic" ...')
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200518074352.23125-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
The "expired_scan_cycle" determines period of scanning expired
primary node net packets.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The "compare_timeout" determines the maximum time to hold the primary net packet.
This patch expose the "compare_timeout", make user have ability to
adjest the value according to application scenarios.
QMP command demo:
{ "execute": "qom-get",
"arguments": { "path": "/objects/comp0",
"property": "compare_timeout" } }
{ "execute": "qom-set",
"arguments": { "path": "/objects/comp0",
"property": "compare_timeout",
"value": 5000} }
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The CanBusClientInfo::can_receive handler return whether the
device can or can not receive new frames. Make it obvious by
returning a boolean type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The NetCanReceive handler return whether the device can or
can not receive new packets. Make it obvious by returning
a boolean type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl5xOC4SHGFybWJydUBy
ZWRoYXQuY29tAAoJEDhwtADrkYZTdMEQAKlgmpTxgdKXuZAxNrbDaX+YoLzO8EXG
GBYRDo4AyrrvAsbhVOp7syNu9LqgXAH52AGkTTrX92dJAl8SWftFV6fcDFNuIBNP
U0F506DoTfS+jRQkwvNu/j4psAgEj4MlcpHZ2mB7gNPZvezYUddnrol/7vJ8q9n7
z+smWZnZTcf/HE9dW5A3Mj3Hias5vzaryg0MUERU1CWqx13WYxw2kNFUjquQ9JBY
grTEfpUmftralo2gVNdSN2nR8RomXfYCD0ixTB+jlKD2Ke0a3pSEY0/WLBFPQUr2
NbNl1U2Oim+vbJ0SwkjUhEISZdaqYcFJy1kx1CmS7OSQ90zcj+Q4F6eEt8xjWLxs
pwSl6KByG+9JOI9ysq9PnT4g+4Qa0kog4qU8sV9Mh0DD5kY2evoxfleOrPspVXsj
9F557bNS47Zqa7FksFDOBvArloIHRFWTHPBBWILjYbVuTAbT7t6q1el6DVzuuO02
KdjZVJQyJCJMN5Ez/0EOky7l5tkGeoZ7fQmnRp5L7EViB8vVs5vk0BK61q7o5zf5
OS+Jk0CCIlZ6gEniyKhR1kdg9LYM7049PtI1u5suqtKeT3Iw57FwCaxm4m212fDn
9rdoqIdsQeP82M95naxfvlXLCoSFtnkefRRiRlWegDQJQd5bV60B78GgodGa7Kr8
zSYR5uNgfw12
=VWQB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-03-17' into staging
QAPI patches for 2020-03-17
# gpg: Signature made Tue 17 Mar 2020 20:50:54 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-03-17: (30 commits)
net: Track netdevs in NetClientState rather than QemuOpt
net: Complete qapi-fication of netdev_add
qmp: constify QmpCommand and list
qapi: Mark deprecated QMP parts with feature 'deprecated'
qapi: New special feature flag "deprecated"
qapi: Replace qmp_dispatch()'s TODO comment by an explanation
qapi: Simplify how qmp_dispatch() gets the request ID
qapi: Simplify how qmp_dispatch() deals with QCO_NO_SUCCESS_RESP
qapi: Inline do_qmp_dispatch() into qmp_dispatch()
qapi: Add feature flags to struct members
qapi/schema: Call QAPIDoc.connect_member() in just one place
qapi/schema: Rename QAPISchemaObjectType{Variant,Variants}
qapi/schema: Reorder classes so related ones are together
qapi/schema: Change _make_features() to a take feature list
qapi/introspect: Factor out _make_tree()
qapi/introspect: Rename *qlit* to reduce confusion
qapi: Consistently put @features parameter right after @ifcond
qapi: Add feature flags to remaining definitions
qapi/schema: Clean up around QAPISchemaEntity.connect_doc()
tests/test-qmp-event: Check event is actually emitted
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As mentioned in the previous patch, our use of QemuOpt group "netdev"
has two purposes: collect the CLI arguments, and serve as a witness
for monitor hotplug actions. As the latter didn't use anything but an
id, it felt rather unclean to have to touch QemuOpts at all when going
through QMP, so let's instead track things with a bool field in
NetClientState.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317201711.322764-3-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We've had all the required pieces for doing a type-safe representation
of netdev_add as a flat union for quite some time now (since
0e55c381f6 in v2.7.0, released in 2016), but did not make the final
switch to using it because of concern about whether a command-line
regression in accepting "1" in place of 1 for integer arguments would
be problematic. Back then, we did not have the deprecation cycle to
allow us to make progress. But now that we have waited so long, other
problems have crept in: for example, our desire to add
qemu-storage-daemon is hampered by the inability to express net
objects, and we are unable to introspect what we actually accept.
Additionally, our round-trip through QemuOpts silently eats any
argument that expands to an array, rendering dnssearch, hostfwd, and
guestfwd useless through QMP:
{"execute": "netdev_add", "arguments": { "id": "netdev0",
"type": "user", "dnssearch": [
{ "str": "8.8.8.8" }, { "str": "8.8.4.4" }
]}}
So without further ado, let's turn on proper QAPI. netdev_add() was a
trivial wrapper around net_client_init(), which did a few steps prior
to calling net_client_init1(); with this patch, we now skip directly
to net_client_init1(). In addition to fixing array parameters, the
following additional differences occur:
- {"execute": "netdev_add", "arguments": {"type": "help"}}
no longer attempts to print help to stdout and exit. Bug fix, broken
in 547203ead4 'net: List available netdevs with "-netdev help"',
v2.12.0.
- {"execute": "netdev_add", "arguments': {... "ipv6-net": "..." }}
no longer attempts to desugar the undocumented ipv6-net magic string
into the proper "ipv6-prefix" and "ipv6-prefixlen". Undocumented
misfeature, introduced in commit 7aac531ef2 "qapi-schema, qemu-options
& slirp: Adding Qemu options for IPv6 addresses", v2.6.0.
- {'execute':'netdev_add',
'arguments':{'id':'net2', 'type':'hubport', 'hubid':"2"}}
{"error": {"class": "GenericError", "desc": "Invalid parameter type for 'hubid', expected: integer"}}
Used to succeed: since our command line treats everything as strings,
our not-so-round-trip conversion from QAPI -> QemuOpts -> QAPI lost
the original typing and turned everything into a string; now that we
skip the QemuOpts, the JSON input has to match the exact QAPI type.
But this stricter QMP is desirable, and introspection is sufficient
for any affected applications to make sure they use it correctly.
In qmp_netdev_add(), we still have to create a QemuOpts object so that
qmp_netdev_del() will be able to remove a hotplugged network device;
but the opts->head remains empty since we now manage all parsing
through the QAPI object rather than QemuOpts; a separate patch will
address the abuse of QemuOpts as a witness for whether a
NetClientState is a netdev. In the meantime, our argument that we are
okay requires auditing all uses of option group "netdev":
- qemu_netdev_opts: option group definition, empty .desc[]
- CLI (CLI netdev parsing ends before monitors start, so while
monitors can mess with CLI netdevs, CLI cannot mess with
monitor netdevs):
- main() case QEMU_OPTION_netdev: store CLI definition
- main() case QEMU_OPTION_readconfig, case QEMU_OPTION_writeconfig:
similar, dealing only with CLI
- net_init_clients(): Pass CLI to net_client_init()
- Monitor:
- hmp_netdev_add(): straightforward parse into net_client_init()
- qmp_netdev_add(): subject of this patch, used to add full
object to option group, now just adds bare-bones id
- qmp_netdev_del(), netdev_del_completion(): check the option group
solely for id, as a 'is this a netdev' predicate
Reported-by: Alex Kirillov <lekiravi@yandex-team.ru>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317201711.322764-2-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message typo fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):
--v-- description start --v--
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to
declare variable-length types such as these ones is a flexible
array member [1], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler
warning in case the flexible array does not occur last in the
structure, which will help us prevent some kind of undefined
behavior bugs from being unadvertenly introduced [2] to the
Linux codebase from now on.
--^-- description end --^--
Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).
All these instances of code were found with the help of the
following Coccinelle script:
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
};
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
} QEMU_PACKED;
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1
Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's been deprecated since QEMU v3.1.0. Time to finally remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191205104109.18680-1-thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reworked Thomas's deprecated.texi to the rst
To switch the Secondary to Primary, we need to insert new filters
before the filter-rewriter.
Add the options insert= and position= to be able to insert filters
anywhere in the filter list.
position should be "head" or "tail" to insert at the head or
tail of the filter list or it should be "id=<id>" to specify
the id of another filter.
insert should be either "before" or "behind" to specify where to
insert the new filter relative to the one specified with position.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum.
By using the enum in the IOEventHandler typedef we:
- make the IOEventHandler type more explicit (this handler
process out-of-band information, while the IOReadHandler
is in-band),
- help static code analyzers.
This patch was produced with the following spatch script:
@match@
expression backend, opaque, context, set_open;
identifier fd_can_read, fd_read, fd_event, be_change;
@@
qemu_chr_fe_set_handlers(backend, fd_can_read, fd_read, fd_event,
be_change, opaque, context, set_open);
@depends on match@
identifier opaque, event;
identifier match.fd_event;
@@
static
-void fd_event(void *opaque, int event)
+void fd_event(void *opaque, QEMUChrEvent event)
{
...
}
Then the typedef was modified manually in
include/chardev/char-fe.h.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-15-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit all the events ignored by this frontend, to silent the
following GCC warning:
CC net/vhost-user.o
net/vhost-user.c: In function ‘net_vhost_user_event’:
net/vhost-user.c:269:5: error: enumeration value ‘CHR_EVENT_BREAK’ not handled in switch [-Werror=switch]
269 | switch (event) {
| ^~~~~~
net/vhost-user.c:269:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch]
net/vhost-user.c:269:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch]
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20191218172009.8868-9-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl37M6gACgkQ+9DbCVqe
KkQ0Rwf/d0lGDPQN1Uf0zqZRQQmDCqWVuqHhZJ5xWDjbyVT2eUwR07TvNZeUKEWX
iO+u6S7Tv91oLjZN5WjhaiuSjtJaEzCdcpkIJAWXLP/lzse37HEwvLBsdg71y+46
LNvBrJRPpQotdb7fjr8RgCwc1qg2Bz15ekSn7XIA175zTMmUsshLJBVhLbGNqrVm
F2UmjB9oFJ0+nzrcEnpFmWw7xvVrX1dImZXv5C2pvuHF7efSjGwiFviTRZgDjOGs
V7HiWRV1QcgTigncncxTMbhMTKTVKK+e7O+y0DZWt/NSrT/yLDy5rcwySpmvu6C+
cRmh/0tMo1KAhiz8Xy8LookhVj6hdA==
=OAkV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging
Various testing and logging updates
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
# gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits)
tests/tcg: ensure we re-configure if configure.sh is updated
trace: replace hand-crafted pattern_glob with g_pattern_match_simple
linux-user: convert target_munmap debug to a tracepoint
linux-user: log page table changes under -d page
linux-user: add target_mmap_complete tracepoint
linux-user: convert target_mmap debug to tracepoint
linux-user: convert target_mprotect debug to tracepoint
travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry
docker: gtester is no longer used
Added tests for close and change of logfile.
Add use of RCU for qemu_logfile.
qemu_log_lock/unlock now preserves the qemu_logfile handle.
Add a mutex to guarantee single writer to qemu_logfile handle.
Cleaned up flow of code in qemu_set_log(), to simplify and clarify.
Fix double free issue in qemu_set_log_filename().
ci: build out-of-tree
travis.yml: Enable builds on arm64, ppc64le and s390x
tests/test-util-filemonitor: Skip test on non-x86 Travis containers
tests/hd-geo-test: Skip test when images can not be created
iotests: Skip test 079 if it is not possible to create large files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_log_lock() now returns a handle and qemu_log_unlock() receives a
handle to unlock. This allows for changing the handle during logging
and ensures the lock() and unlock() are for the same file.
Also in target/tilegx/translate.c removed the qemu_log_lock()/unlock()
calls (and the log("\n")), since the translator can longjmp out of the
loop if it attempts to translate an instruction in an inaccessible page.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-5-robert.foley@linaro.org>
Variable int err in inner scope shadows Error *err in outer scope.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191205174635.18758-3-vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
'colo_mark_tcp_pkt' should return 'true' when packets are the same, and
'false' otherwise. However, it returns 'true' when
'colo_compare_packet_payload' returns non-zero while
'colo_compare_packet_payload' is just a 'memcmp'. The result is that
COLO-compare reports inconsistent TCP packets when they are actually
the same.
Fixes: f449c9e549 ("colo: compare the packet based on the tcp sequence number")
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Fan Yang <Fan_Yang@sjtu.edu.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdpjPbAAoJECgfDbjSjVRpQqUH/2xyT++y8K17mCI1IILLZd3d
eOqElEHz78qlEfR2euv63YksZoeHpMO5HiAdwOGGF8CjcaCT4Hl+pPDffTYVXtt+
VZ88vSSXL49wpMcpvRGR5Isy0eXJzWilTBMu2eu8phN9tX82dlu08Oi4XGAosrBJ
uZg61DyiGDnSOpoofHhjvXJEaiL0pzkTjf8qAoW3TaVcB9NQKnunMEIDD646JS5z
AAj4+XBJfUG9cp7/MG+djjVmJDdUpjL5e5uWNWakbgUVqSbHog78RIrBoD6SH7pt
/6hHHoSM9VX1wWgdTdVdNAQAZVnWs31w4v31d8UfaT15KJEoG47U0gDgmLzXDyo=
=+xdg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, acpi: features, fixes, tests
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2019 22:02:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: add vhost-user-fs-pci device
virtio: add vhost-user-fs base device
virtio: Add virtio_fs linux headers
tests/acpi: add expected tables for arm/virt
tests: document how to update acpi tables
tests: Add bios tests to arm/virt
tests: allow empty expected files
tests/acpi: add empty files
tests: Update ACPI tables list for upcoming arm/virt tests
docs/specs: Add ACPI GED documentation
hw/arm: Use GED for system_powerdown event
hw/arm: Factor out powerdown notifier from GPIO
hw/arm/virt-acpi-build: Add PC-DIMM in SRAT
hw/arm/virt: Enable device memory cold/hot plug with ACPI boot
hw/arm/virt: Add memory hotplug framework
hw/acpi: Add ACPI Generic Event Device Support
hw/acpi: Do not create memory hotplug method when handler is not defined
hw/acpi: Make ACPI IO address space configurable
vhost-user: save features if the char dev is closed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
That way the state can be correctly restored when the device is opened
again. This might happen if the backend is restarted.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1738768
Reported-by: Pei Zhang <pezhang@redhat.com>
Fixes: 6ab79a20af ("do not call vhost_net_cleanup() on running net from char user event")
Cc: ddstreet@canonical.com
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Message-Id: <20190924162044.11414-1-amorenoz@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This can be used to set a DNS server to be used by the guest which is
different from the one configured on the host.
Buglink: https://bugs.launchpad.net/qemu/+bug/1010484
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
While the tracing framework does not forbid trailing newline in
events format string, using them lead to confuse output.
It is the responsibility of the backend to properly end an event
line.
Some of our formats have trailing newlines, remove them.
[Fixed typo in commit description reported by Eric Blake
<eblake@redhat.com>
--Stefan]
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190916095121.29506-2-philmd@redhat.com
Message-Id: <20190916095121.29506-2-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 78dd48df3 removed the last caller of register_savevm_live for an
instantiable device (rather than a single system wide device);
so trim out the parameter.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190822115433.12070-1-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This patch to fix the origin "char *data" memory leak, code style issue
and add necessary check here.
Reported-by: Coverity (CID 1402785)
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When invoking qemu-bridge-helper in 'net_bridge_run_helper',
instead of using fixed sized buffers, use dynamically allocated
ones initialised and returned by g_strdup_printf().
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch make colo-compare can send message to remote COLO frame(Xen) when occur checkpoint.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We need use this function to send notification message for remote colo-frame(Xen).
So we add new parameter for this job.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add chardev handler to send notification to remote(current from Xen) colo-frame.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add the "notify_dev=chardevID" parameter. After that colo-compare can connect with
remote(currently just for Xen, KVM-COLO didn't need it.) colo-frame through chardev socket,
it can notify remote(Xen) colo-frame to handle checkpoint event.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Previously there was a single instance of the timer used by
monitor triggered announces, that's OK, but when combined with the
previous change that lets you have announces for subsets of interfaces
it's a bit restrictive if you want to do different things to different
interfaces.
Add an 'id' field to the announce, and maintain a list of the
timers based on id.
This allows you to for example:
a) Start an announce going on interface eth0 for a long time
b) Start an announce going on interface eth1 for a long time
c) Kill the announce on eth0 while leaving eth1 going.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Allow the caller to restrict the set of interfaces that announces are
sent on. The default is still to send on all interfaces.
e.g.
{ "execute": "announce-self", "arguments": { "initial": 50, "max": 550, "rounds": 5, "step": 50, "interfaces": ["vn2", "vn1"] } }
This doesn't affect the behaviour of migraiton announcments.
Note: There's still only one timer for the qmp command, so that
performing an 'announce-self' on one list of interfaces followed
by another 'announce-self' on another list will stop the announces
on the existing set.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since the get_str_sep() function is no longer used in
net/net.c, we can remove it.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use the glib function to split host address and port in
the parse_host_port() function.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
net_client_init() uses a variable length array to store the prefix
of 'ipv6-net' parameter (e.g. if ipv6-net=fec0::0/64, the prefix
is 'fec0::0').
This patch introduces g_strsplit() to split the 'ipv6-net' parameter,
so we can remove the variable length array.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If 'ipv6-prefixlen' is not a number, the current behaviour
produces an assertion failure:
$ qemu-system-x86_64 -net user,ipv6-net=feca::0/a
qemu-system-x86_64: qemu/util/qemu-option.c:1175: qemu_opts_foreach:
Assertion `!errp || !*errp' failed.
Aborted (core dumped)
This patch fixes it, jumping to the end of the function when
'ipv6-prefixlen' is not a number, and printing the more friendly
message:
$ qemu-system-x86_64 -net user,ipv6-net=feca::0/a
qemu-system-x86_64: Parameter 'ipv6-prefixlen' expects a number
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Buglink: https://launchpad.net/bugs/1823458
Currently, a user CHR_EVENT_CLOSED event will cause net_vhost_user_event()
to call vhost_user_cleanup(), which calls vhost_net_cleanup() for all
its queues. However, vhost_net_cleanup() must never be called like
this for fully-initialized nets; when other code later calls
vhost_net_stop() - such as from virtio_net_vhost_status() - it will try
to access the already-cleaned-up fields and fail with assertion errors
or segfaults.
The vhost_net_cleanup() will eventually be called from
qemu_cleanup_net_client().
Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Message-Id: <20190416184624.15397-3-dan.streetman@canonical.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Because event_unhandled_count may be accessed concurrently, it needs
to be protected by taking the lock. However the assert is outside the
lock, probably causing it to read garbage and aborting Qemu erroneously.
The Bug only happens when running Qemu in COLO mode.
This Patch fixes the following bug: https://bugs.launchpad.net/qemu/+bug/1824622
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reword and add a missing parentheses at the end of the
error message.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-6-armbru@redhat.com>
[Rebase to master: update include/hw/net/ne2000-isa.h]
We are printing all other help output to stdout already (e.g. "-help",
"-cpu help" and "-machine help" output). So the "-net nic,model=help"
output should go to stdout instead of stderr, too. And while we're at
it, also print the NICs line by line, like we do it e.g. with the
"-cpu help" or "-M help" output, too.
Buglink: https://bugs.launchpad.net/qemu/+bug/1574327
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190423160608.7519-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The fcntl will change the flags directly, use qemu_set_nonblock()
instead.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
-net socket has a fd argument, and may be passed pre-opened sockets.
TCP sockets use framing.
UDP sockets have datagram boundaries.
When given a unix dgram socket, it will be able to read from it, but
will attempt to send on the dgram_dst, which is unset. The other end
will not receive the data.
Let's teach -net socket to recognize a UNIX DGRAM socket, and use the
regular send() command (without dgram_dst).
This makes running slirp out-of-process possible that
way (python pseudo-code):
a, b = socket.socketpair(socket.AF_UNIX, socket.SOCK_DGRAM)
subprocess.Popen('qemu -net socket,fd=%d -net user' % a.fileno(), shell=True)
subprocess.Popen('qemu ... -net nic -net socket,fd=%d' % b.fileno(), shell=True)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Take a VhostUserState* that can be pre-allocated, and initialize it
with the associated chardev.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Message-Id: <20190308140454.32437-4-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the "system" libslirp if its present or requested.
Else build with a static libslirp.a if slirp/ is checked
out ("internal") or a submodule ("git").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-7-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Prepare for making slirp/ a standalone project.
Remove some useless includes while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-5-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
slirp migration code uses QEMU vmstate so far, when building WITH_QEMU.
Introduce slirp_state_{load,save,version}() functions to move the
state saving handling to libslirp side.
So far, the bitstream compatibility should remain equal with current
QEMU, as this is effectively using the same code, with the same format
etc. When libslirp is made standalone, we will need some mechanism to
ensure bitstream compatibility regardless of the libslirp version
installed. See the FIXME note in the code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-3-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Add a qmp command that can trigger guest announcements.
It uses its own announce-timer instance, and parameters
passed to it explicitly in the command.
Like most qmp commands, it's in the main thread/bql, so
there's no racing with any outstanding timer.
Based on work of Germano Veit Michel <germano@redhat.com> and
Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Some network devices have a capability to do self announcements
(ex: virtio-net). Add infrastructure that would allow devices
to expose this ability.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Switch the announcements to using the new announce timer.
Move the code that does it to announce.c rather than savevm
because it really has nothing to do with the actual migration.
Migration starts the announce from bh's and so they're all
in the main thread/bql, and so there's never any racing with
the timers themselves.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The 'announce timer' will be used by migration, and explicit
requests for qemu to perform network announces.
Based on the work by Germano Veit Michel <germano@redhat.com>
and Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Changes:
- Save CPU cycles by computing the return value while scanning the
input iovec, rather than calling iov_size() at the end.
- Remove check for s->tx != NULL, because it cannot happen.
- Cache ring->tail in a local variable and use it to check for
space in the TX ring. The use of nm_ring_empty() was invalid,
because nobody is updating ring->cur and ring->head at that point.
- In case we run out of netmap slots in the middle of a packet,
move the wake-up point by advancing ring->cur, but do not
expose the incomplete packet (i.e., by updating also ring->head).
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Improve code reuse by implementing netmap_receive() with a call
to netmap_receive_iov().
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This change improves the handling of incomplete multi-slot packets
(e.g. with the NS_MOREFRAG set), by advancing ring->head only on
complete packets. The ring->cur pointer is advanced in any case in
order to acknowledge the kernel and move the wake-up point (thus
avoiding repeated wake-ups).
Also don't be verbose when incomplete packets are found.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fix duplicated code:
https://bugs.launchpad.net/qemu/+bug/1811499
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
vhost-user already has a way to communicate the endianness of the guest
via the vring endianness messages. The vring endianness always matches
the vnet header endianness so there is no need to do anything else in
the backend.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1543851204-41186-9-git-send-email-pbonzini@redhat.com>
Message-Id: <1550165756-21617-5-git-send-email-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hw/net/vhost_net.c needs functions that are declared in net/vhost-user.c: the
vhost-user code is always compiled into QEMU, only the constructor
net_init_vhost_user is unreachable. Also, net/vhost-user.c needs functions
declared in hw/virtio/vhost-stub.c even if no virtio device exists.
Break this dependency. First, add a minimal version of net/vhost-user.c,
with no functionality and no dependency on vhost code. Second, #ifdef out
the calls back to net/vhost-user.c from hw/net/vhost_net.c.
While at it, this patch fixes the CONFIG_VHOST_NET_USE*D* typo.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1543851204-41186-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1550165756-21617-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be needed by vhost-user-test, when each test switches to
its own GMainLoop and GMainContext. Otherwise, for a reconnecting
socket the initial connection will happen on the default GMainContext,
and no one will be listening on it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190202110834.24880-1-pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This is friendlier for FFI bindings.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
It would be legitimate to use libslirp without glib. Let's
add_poll/get_revents pair of callbacks to provide the same
functionality.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Remove hard-coded dependency on slirp in main-loop, and use a "poll"
notifier instead. The notifier is registered per slirp instance.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Use a more descriptive name for the callback.
Reuse the SlirpWriteCb type. Wrap it to check that all data has been written.
Return a ssize_t for potential error handling and data-loss reporting.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Introduce a SlirpCb callback to kick the main io-thread.
Add an intermediary sodrop() function that will call SlirpCb.notify
callback when sbdrop() returns true.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Add a counter-part to register_poll_fd() for completeness.
(so far, register_poll_fd() is called only on struct socket fd)
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Replace qemu_set_nonblock() with slirp_set_nonblock()
qemu_set_nonblock() does some event registration with the main
loop. Add a new callback register_poll_fd() for that reason.
Always build the fd-register stub, to avoid #if WIN32.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Instead of calling into QEMU chardev directly, and mixing it with
slirp_add_exec() handling, add a new function slirp_add_guestfwd()
which takes a write callback.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Since commit 12f8def0e0 (v2.9), qemu
requires Vista. Let's remove some conditional code.
Note that this introduces a missing declaration warning with mingw.
warning: implicit declaration of function 'inet_ntop'
See also: https://sourceforge.net/p/mingw-w64/mailman/message/36473782/
We could workaround it by declaring it ourself depending on __MINGW64_VERSION_*:
WINSOCK_API_LINKAGE INT WSAAPI inet_pton(int Family, PCTSTR pszAddrString, PVOID pAddrBuf);
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Only slirp/libslirp.h should be included.
Instead of using some slirp declarations and utility functions directly,
let's copy them in net/util.h.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This will bring slirp a bit forward to the state of an independent
project.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
There is nothing performance-sensitive in returning an allocated
string for info, and handling the monitor_printf() on the caller side.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Let's not mix command line and chardev pointers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Let's make the slirp interface a bit more library-like.
Associate the slirp_output() with a Slirp context.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most list head structs need not be given a name. In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed. In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct. So clean up everything, not giving a
name except in the rare case where it is necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
COLO uses a worker context (iothread) to drive the chardev. All
backends are not able to switch the context, let's report an error in
this case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181205203737.9011-6-marcandre.lureau@redhat.com>
Reviewed-by: Li Zhijian <lizhiian@cn.fujitsu.com>
Reviewed-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
If we want to qtest through hub, it would be much more simpler and
safer to configure the hub without host network. So silent this
warnings for qtest.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20181204035347.6148-3-jasowang@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We try to detect and drop too large packet (>INT_MAX) in 1592a99470
("net: ignore packet size greater than INT_MAX") during packet
delivering. Unfortunately, this is not sufficient as we may hit
another integer overflow when trying to queue such large packet in
qemu_net_queue_append_iov():
- size of the allocation may overflow on 32bit
- packet->size is integer which may overflow even on 64bit
Fixing this by moving the check to qemu_sendv_packet_async() which is
the entrance of all networking codes and reduce the limit to
NET_BUFSIZE to be more conservative. This works since:
- For the callers that call qemu_sendv_packet_async() directly, they
only care about if zero is returned to determine whether to prevent
the source from producing more packets. A callback will be triggered
if peer can accept more then source could be enabled. This is
usually used by high speed networking implementation like virtio-net
or netmap.
- For the callers that call qemu_sendv_packet() that calls
qemu_sendv_packet_async() indirectly, they often ignore the return
value. In this case qemu will just the drop packets if peer can't
receive.
Qemu will copy the packet if it was queued. So it was safe for both
kinds of the callers to assume the packet was sent.
Since we move the check from qemu_deliver_packet_iov() to
qemu_sendv_packet_async(), it would be safer to make
qemu_deliver_packet_iov() static to prevent any external user in the
future.
This is a revised patch of CVE-2018-17963.
Cc: qemu-stable@nongnu.org
Cc: Li Qiang <liq3ea@163.com>
Fixes: 1592a99470 ("net: ignore packet size greater than INT_MAX")
Reported-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20181204035347.6148-2-jasowang@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The original code just follow the TCP state diagram,
but in this case, we can skip the TCPS_TIME_WAIT state to simplify
the implementation.
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
-----BEGIN PGP SIGNATURE-----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=kPZX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging
Error reporting patches for 2018-10-22
# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2018-10-22: (40 commits)
error: Drop bogus "use error_setg() instead" admonitions
vpc: Fail open on bad header checksum
block: Clean up bdrv_img_create()'s error reporting
vl: Simplify call of parse_name()
vl: Fix exit status for -drive format=help
blockdev: Convert drive_new() to Error
vl: Assert drive_new() does not fail in default_drive()
fsdev: Clean up error reporting in qemu_fsdev_add()
spice: Clean up error reporting in add_channel()
tpm: Clean up error reporting in tpm_init_tpmdev()
numa: Clean up error reporting in parse_numa()
vnc: Clean up error reporting in vnc_init_func()
ui: Convert vnc_display_init(), init_keyboard_layout() to Error
ui/keymaps: Fix handling of erroneous include files
vl: Clean up error reporting in device_init_func()
vl: Clean up error reporting in parse_fw_cfg()
vl: Clean up error reporting in mon_init_func()
vl: Clean up error reporting in machine_set_property()
vl: Clean up error reporting in chardev_init_func()
qom: Clean up error reporting in user_creatable_add_opts_foreach()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This new usernet option can be used to add data for option 66 (tftp
server name) in the BOOTP reply, which is useful in PXE based automatic
OS install such as OpenBSD.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
When user provides a long domainname or hostname that doesn't fit in the
DHCP packet, we mustn't overflow the response packet buffer. Instead,
report errors, following the g_warning() in the slirp->vdnssearch
branch.
Also check the strlen against 256 when initializing slirp, which limit
is also from the protocol where one byte represents the string length.
This gives an early error before the warning which is harder to notice
or diagnose.
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Calling error_report() in a function that takes an Error ** argument
is suspicious. net_socket_fd_init() does that, and then fails without
setting an error. Wrong. I didn't analyze how exactly this can
break. A caller that reports the error on failure would crash.
Broken when commit c37f0bb1d0 (v2.11.0) converted the function to
Error. Fix by calling error_setg() instead of error_report().
Fixes: c37f0bb1d0
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-15-armbru@redhat.com>
When -netdev l2tpv3 fails, it first reports a specific error, then a
generic one, like this:
$ qemu-system-x86_64 -netdev l2tpv3,id=foo,src=,dst=,txsession=1
qemu-system-x86_64: -netdev l2tpv3,id=foo,src=,dst=,txsession=1: l2tpv3_open : could not resolve src, errno = Name or service not known
qemu-system-x86_64: Device 'l2tpv3' could not be initialized
With the command line, the messages go to stderr. In HMP, they go to
the monitor. In QMP, the second one becomes the error reply, and the
first one goes to stderr.
Convert net_init_tap() to Error. This suppresses the unwanted second
message, and makes the specific error the QMP error reply.
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-14-armbru@redhat.com>
There should not be a reason for passing a packet size greater than
INT_MAX. It's usually a hint of bug somewhere, so ignore packet size
greater than INT_MAX in qemu_deliver_packet_iov()
CC: qemu-stable@nongnu.org
Reported-by: Daniel Shapira <daniel@twistlock.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
After one round of checkpoint, the states between PVM and SVM
become consistent, so it is unnecessary to adjust the sequence
of net packets for old connections, besides, while failover
happens, filter-rewriter will into failover mode that needn't
handle the new TCP connection.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Filter needs to process the event of checkpoint/failover or
other event passed by COLO frame.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It's a good idea to use notifier to notify COLO frame of
inconsistent packets comparing.
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
While do checkpoint, we need to flush all the unhandled packets,
By using the filter notifier mechanism, we can easily to notify
every compare object to do this process, which runs inside
of compare threads as a coroutine.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add almost full TCP state machine in filter-rewriter, except
TCPS_LISTEN and some simplify in VM active close FIN states.
The reason for this simplify job is because guest kernel will track
the TCP status and wait 2MSL time too, if client resend the FIN packet,
guest will resend the last ACK, so we needn't wait 2MSL time in filter-rewriter.
After a net connection is closed, we didn't clear its related resources
in connection_track_table, which will lead to memory leak.
Let's track the state of net connection, if it is closed, its related
resources will be cleared up.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is mostly for readability of the code. Let's make it clear which
callers can create an implicit monitor when the chardev is muxed.
This will also enforce a safer behaviour, as we don't really support
creating monitor anywhere/anytime at the moment. Add an assert() to
make sure the programmer explicitely wanted that behaviour.
There are documented cases, such as: -serial/-parallel/-virtioconsole
and to less extent -debugcon.
Less obvious and questionable ones are -gdb, SLIRP -guestfwd and Xen
console. Add a FIXME note for those, but keep the support for now.
Other qemu_chr_new() callers either have a fixed parameter/filename
string or do not need it, such as -qtest:
* qtest.c: qtest_init()
Afaik, only used by tests/libqtest.c, without mux. I don't think we
support it outside of qemu testing: drop support for implicit mux
monitor (qemu_chr_new() call: no implicit mux now).
* hw/
All with literal @filename argument that doesn't enable mux monitor.
* tests/
All with @filename argument that doesn't enable mux monitor.
On a related note, the list of monitor creation places:
- the chardev creators listed above: all from command line (except
perhaps Xen console?)
- -gdb & hmp gdbserver will create a "GDB monitor command" chardev
that is wired to an HMP monitor.
- -mon command line option
From this short study, I would like to think that a monitor may only
be created in the main thread today, though I remain skeptical :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
The "name" in the [hub_id name] parameter tuple is the same as a
"netdev_id" (which should be unique), so specifying the hub_id here
is just redundant (it was likely just necessary in the past when
the network subsystem was still using "vlans" only and when it did
not use unique "id"s yet).
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In early times, network backends were specified by a "vlan" and "name"
tuple. With the introduction of netdevs, the "name" was replaced by an
"id" (which is supposed to be unique), but the "name" parameter stayed
as an alias which could be used instead of "id". Unfortunately, we miss
the duplication check for "name":
$ qemu-system-x86_64 -net user,name=n1 -net user,name=n1
... starts without an error, while "id" correctly complains:
$ qemu-system-x86_64 -net user,id=n1 -net user,id=n1
qemu-system-x86_64: -net user,id=n1: Duplicate ID 'n1' for net
Instead of trying to fix the code for the legacy "name" parameter, let's
rather get rid of this old interface and deprecate the "name" parameter
now - this will also be less confusing for the users in the long run.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These options likely do not work as expected as soon as the user
tries to use more than one network interface at once. The parameters
have been marked as deprecated since QEMU v2.6, so users had plenty
of time to move their scripts to the new syntax. Time to remove the
old parameters now.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The memory leak on success to create a tap device. And the nfds and
nvhosts may not be the same and need to be processed separately.
Fixes: 07825977 ("tap: fix memory leak on failure to create a multiqueue tap device")
Fixes: 264986e2 ("tap: multiqueue support")
Cc: qemu-stable@nongnu.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
As qemu_new_net_client create new ncs but error happens later,
ncs will be left in global net_clients list and we can't use them any
more, so we need to cleanup them.
Cc: qemu-stable@nongnu.org
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If user forgets to provide any backend types for '-netdev' in qemu CLI,
It triggers seg fault.
e.g.
Expected:
$ qemu -netdev id=net0
qemu-system-x86_64: Parameter 'type' is missing
Actual:
$ qemu -netdev id=net0
Segmentation fault (core dumped)
Fixes: 547203ead4 ("net: List available netdevs with "-netdev help")
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
A guest boot hangs while probing the network interface when
iommu_platform=on is used.
The following qemu cli hangs without this patch:
# $QEMU \
-netdev tap,fd=3,id=hostnet0,vhost=on,vhostfd=4 3<>/dev/tap67 4<>/dev/host-net \
-device virtio-net-pci,netdev=hostnet0,id=net0,iommu_platform=on,disable-legacy=on \
...
Commit: c471ad0e9b (vhost_net: device IOTLB support) took care of
setting vhostfd to non-blocking when QEMU opens /dev/host-net but if
the fd is passed from qemu cli then we need to ensure that fd is set
to non-blocking.
Fixes: c471ad0e9b ("vhost_net: device IOTLB support")
Cc: qemu-stable@nongnu.org
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
A link property can be set during creation, with
object_property_add_link() and later with object_property_set_link().
add_link() doesn't add a reference to the target object, while
set_link() does.
Furthemore, OBJ_PROP_LINK_UNREF_ON_RELEASE flags, set during add_link,
says whether a reference must be released when the property is destroyed.
This can lead to leaks if the property was later set_link(), as the
added reference is never released.
Instead, rename OBJ_PROP_LINK_UNREF_ON_RELEASE to OBJ_PROP_LINK_STRONG
and use that has an indication on how the link handle reference
management in set_link().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180531195119.22021-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbEXNvAAoJECgfDbjSjVRpc8gH/R8xrcFrV+k9wwbgYcOcGb6Y
LWjseE31pqJcxRV80vLOdzYEuLStZQKQQY7xBDMlA5vdyvZxIA6FLO2IsiJSbFAk
EK8pclwhpwQAahr8BfzenabohBv2UO7zu5+dqSvuJCiMWF3jGtPAIMxInfjXaOZY
odc1zY2D2EgsC7wZZ1hfraRbISBOiRaez9BoGDKPOyBY9G1ASEgxJgleFgoBLfsK
a1XU+fDM6hAVdxftfkTm0nibyf7PWPDyzqghLqjR9WXLvZP3Cqud4p8N29mY51pR
KSTjA4FYk6Z9EVMltyBHfdJs6RQzglKjxcNGdlrvacDfyFi79fGdiosVllrjfJM=
=3+V0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi, vhost, misc: fixes, features
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 01 Jun 2018 17:25:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (31 commits)
vhost-blk: turn on pre-defined RO feature bit
ACPI testing: test NFIT platform capabilities
nvdimm, acpi: support NFIT platform capabilities
tests/.gitignore: add entry for generated file
arch_init: sort architectures
ui: use local path for local headers
qga: use local path for local headers
colo: use local path for local headers
migration: use local path for local headers
usb: use local path for local headers
sd: fix up include
vhost-scsi: drop an unused include
ppc: use local path for local headers
rocker: drop an unused include
e1000e: use local path for local headers
ioapic: fix up includes
ide: use local path for local headers
display: use local path for local headers
trace: use local path for local headers
migration: drop an unused include
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Reviewed-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This patch will allow the user to include the domainname option in
replies from the built-in DHCP server.
Signed-off-by: Benjamin Drung <benjamin.drung@profitbricks.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
When multi queue is enabled e.g. for a virtio-net device,
each queue pair will have a vhost_dev, and the only thing
shared between vhost devs currently is the chardev. This
patch introduces a vhost-user state structure which will
be shared by all vhost devs of the same virtio device.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are going to introduce a shared vhost user state which
will be named as 'VhostUserState'. So add 'Net' prefix to
the existing internal state structure in the vhost-user
netdev to avoid conflict.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'vlan' is very confusing since it does not mean something like IEEE
802.1Q, but rather emulated hubs, so let's switch to that terminology
instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It's been marked as deprecated since QEMU v2.9.0, so that should have
been enough time for everybody to either just drop unnecessary "vlan=0"
parameters, to switch to the modern -device + -netdev syntax for connecting
guest NICs with host network backends, or to switch to the "hubport" netdev
in case hubs are really wanted instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The early exits in case of errors leak the memory allocated for nd_id.
Fix it by using a "goto out" to the cleanup at the end of the function
instead.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Despite the fact that now when the initialization of vde fails, qemu
does not end silently, no informative error is printed. The patch
generates an error and pushes it through the calling function.
Related bug: https://bugs.launchpad.net/qemu/+bug/676029
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If the backend could not transmit a packet right away for some reason,
the packet is queued for asynchronous sending. The corresponding vq
element is tracked in the async_tx.elem field of the VirtIONetQueue,
for later freeing when the transmission is complete.
If a reset happens before completion, virtio_net_tx_complete() will push
async_tx.elem back to the guest anyway, and we end up with the inuse flag
of the vq being equal to -1. The next call to virtqueue_pop() is then
likely to fail with "Virtqueue size exceeded".
This can be reproduced easily by starting a guest with an hubport backend
that is not connected to a functional network, eg,
-device virtio-net-pci,netdev=hub0 -netdev hubport,id=hub0,hubid=0
and no other -netdev hubport,hubid=0 on the command line.
The appropriate fix is to ensure that such an asynchronous transmission
cannot survive a device reset. So for all queues, we first try to send
the packet again, and eventually we purge it if the backend still could
not deliver it.
CC: qemu-stable@nongnu.org
Reported-by: R. Nageswara Sastry <nasastry@in.ibm.com>
Buglink: https://github.com/open-power-host-os/qemu/issues/37
Signed-off-by: Greg Kurz <groug@kaod.org>
Tested-by: R. Nageswara Sastry <nasastry@in.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJanLRTAAoJEO8Ells5jWIRAxsH/3wX62o+msLjJHakjcu2OTMG
vdhnB8GfjC5HgMYbovG7TJ95KXg7VRodwru9zgJheTK7DG8fG0nFRuzr8L2tSAph
3s0YTFYDXJ6MBYD//ubdX+jNnchIvMlTX6yheAzcXvQb+nCcN2efN0XpSlGR+g4D
wGi1lWKurGEJE6RUfYPpbbUkjXjbbKyclE0RL+WBmmyruerXI8OxuXQ3GuHK75fb
cZLiToyP9+qnnDyT4lceG5vGRjYLtL8t1nB01M4UTr+tlCkMMsoOjufzGB/CDUdm
oGi1OuKRw06xTLroUJ/uiwSKQH6dMbrv6sLvk92dHnL9k2ZAjv2bVAgz8eAG7o0=
=pPIZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 05 Mar 2018 03:06:59 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap: setting error appropriately when calling net_init_tap_one()
hw/net: Remove unnecessary header includes
net: Add a new convenience option "--nic" to configure default/on-board NICs
net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commands
net: Remove the deprecated way of dumping network packets
net: Make net_client_init() static
net: Only show vhost-user in the help text if CONFIG_POSIX is defined
net: List available netdevs with "-netdev help"
net: Move error reporting from net_init_client/netdev to the calling site
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If netdev_add tap,id=net0,...,vhost=on failed in net_init_tap_one(),
the followed up device_add virtio-net-pci,netdev=net0 will fail
too, prints:
TUNSETOFFLOAD ioctl() failed: Bad file descriptor TUNSETOFFLOAD
ioctl() failed: Bad file descriptor
The reason is that the fd of tap is closed when error occured after
calling net_init_tap_one().
The fd should be closed when calling net_init_tap_one failed:
- if tap_set_sndbuf() failed
- if tap_set_sndbuf() succeeded but vhost failed to open or
initialize with vhostforce flag on
- with wrong vhost command line parameter
The fd should not be closed just because vhost failed to open or
initialize but without vhostforce flag. So the followed up
device_add can fall back to userspace virtio successfully.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The legacy "-net" option can be quite confusing for the users since most
people do not expect to get a "vlan" hub between their emulated guest
hardware and the host backend. But so far, we are also not able to get
rid of "-net" completely, since it is the only way to configure on-board
NICs that can not be instantiated via "-device" yet. It's also a little
bit shorter to type "-net nic -net tap" instead of "-device xyz,netdev=n1
-netdev tap,id=n1".
So what we need is a new convenience option that is shorter to type than
the full -device + -netdev stuff, and which can be used to configure the
on-board NICs that can not be handled via -device yet. Thus this patch now
provides such a new option "--nic": It adds an entry in the nd_table to
configure a on-board / default NIC, creates a host backend and connects
the two directly, without a confusing "vlan" hub inbetween.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
They are deprecated since QEMU v2.10, and so far nobody complained that
these commands are still necessary for any reason - and since you can use
'netdev_add' and 'netdev_remove' instead, there also should not be any
real reason. Since they are also standing in the way for the upcoming
'vlan' clean-up, it's now time to remove them.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
"-net dump" has been marked as deprecated since QEMU v2.10, since it
only works with the deprecated 'vlan' parameter (or hubs). Network
dumping should be done with "-object filter-dump" nowadays instead.
Since nobody complained so far about the deprecation message, let's
finally get rid of "-net dump" now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The function is only used within net.c, so there's no need that
this is a global function.
While we're at it, also remove the unused prototype compute_mcast_idx()
(the function has been removed in commit d9caeb09b1).
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Other options like "-chardev" or "-device" feature a nice help text
with the available devices when being called with "help" or "?".
Since it is quite useful, especially if you want to see which network
backends have been compiled into the QEMU binary, let's provide such
a help text for "-netdev", too.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It looks strange that net_init_client() and net_init_netdev() both
take an "Error **errp" parameter, but then do the error reporting
with "error_report_err(local_err)" on their own. Let's move the
error reporting to the calling site instead to simplify this code
a little bit.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
g_free() was moved from vhost_net_cleanup in commit e6bcb1b, so we should
free net after vhost_net_cleanup
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Reviewed-by: Marc-André Lureau < marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Connection to the real host CAN bus network through
SocketCAN network interface is available only for Linux
host system. Mechanism is generic, support for another
CAN API and operating systems can be implemented in future.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CanBusState state structure is created for each
emulated CAN channel. Individual clients/emulated
CAN interfaces or host interface connection registers
to the bus by CanBusClientState structure.
The CAN core is prepared to support connection to the
real host CAN bus network. The commit with such support
for Linux SocketCAN follows.
Implementation is as simple as possible. There is no state to be
migrated, and messages prioritization and queuing are not considered
for now. But it is intended to be extended when need arises.
Development repository and more documentation at
https://gitlab.fel.cvut.cz/canbus/qemu-canbus
The work is based on Jin Yang GSoC 2013 work funded
by Google and mentored in frame of RTEMS project GSoC
slot donated to QEMU.
Rewritten for QEMU-2.0+ versions and architecture cleanup
by Pavel Pisa (Czech Technical University in Prague).
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
