I was after adding qemu_spin_destroy calls, but while at
it I noticed that we are leaking some memory.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200609200738.445-5-robert.foley@linaro.org>
Message-Id: <20200612190237.30436-8-alex.bennee@linaro.org>
It will be used for TSAN annotations.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200609200738.445-4-robert.foley@linaro.org>
Message-Id: <20200612190237.30436-7-alex.bennee@linaro.org>
We convert queued work to a QSIMPLEQ, instead of
open-coding it.
While at it, make sure that all accesses to the list are
performed while holding the list's lock.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200609200738.445-3-robert.foley@linaro.org>
Message-Id: <20200612190237.30436-6-alex.bennee@linaro.org>
We tried running QEMU under tsan in 2016, but tsan's lack of support for
longjmp-based fibers was a blocker:
https://groups.google.com/forum/#!topic/thread-sanitizer/se0YuzfWazw
Fortunately, thread sanitizer gained fiber support in early 2019:
https://reviews.llvm.org/D54889
This patch brings tsan support upstream by importing the patch that annotated
QEMU's coroutines as tsan fibers in Android's QEMU fork:
https://android-review.googlesource.com/c/platform/external/qemu/+/844675
Tested with '--enable-tsan --cc=clang-9 --cxx=clang++-9 --disable-werror'
configure flags.
Signed-off-by: Lingfeng Yang <lfy@google.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[cota: minor modifications + configure changes]
Signed-off-by: Robert Foley <robert.foley@linaro.org>
[RF: configure changes, coroutine fix + minor modifications]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200609200738.445-2-robert.foley@linaro.org>
Message-Id: <20200612190237.30436-5-alex.bennee@linaro.org>
dtc submodule update, now call the libfdt target from the new
dtc Makefile, which has been changed to not require bison, flex, etc.
This removes warnings during the build.
scripts/ symlink and tests directory creation are not necessary,
and neither is calling the clean rule explicitly.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200518160319.18861-2-cfontana@suse.de>
Message-Id: <20200612190237.30436-3-alex.bennee@linaro.org>
We should be keeping this up to date as Fedora goes out of support
quite quickly.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200612190237.30436-2-alex.bennee@linaro.org>
-----BEGIN PGP SIGNATURE-----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=ihvp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qom-2020-06-15' into staging
QOM patches for 2020-06-15
# gpg: Signature made Mon 15 Jun 2020 21:07:19 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qom-2020-06-15: (84 commits)
MAINTAINERS: Make section QOM cover hw/core/*bus.c as well
qdev: qdev_init_nofail() is now unused, drop
qdev: Convert bus-less devices to qdev_realize() with Coccinelle
qdev: Use qdev_realize() in qdev_device_add()
qdev: Make qdev_realize() support bus-less devices
s390x/event-facility: Simplify creation of SCLP event devices
microbit: Eliminate two local variables in microbit_init()
sysbus: sysbus_init_child_obj() is now unused, drop
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 4
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 3
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 1
qdev: Drop qdev_realize() support for null bus
sysbus: Convert to sysbus_realize() etc. with Coccinelle
sysbus: New sysbus_realize(), sysbus_realize_and_unref()
sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 2
hw/arm/armsse: Pass correct child size to sysbus_init_child_obj()
sysbus: Tidy up sysbus_init_child_obj()'s @childsize arg, part 1
microbit: Tidy up sysbus_init_child_obj() @child argument
sysbus: Drop useless OBJECT() in sysbus_init_child_obj() calls
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set vendor property to IMX to enable IMX specific functionality
in sdhci code.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200603145258.195920-3-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Linux kernel's IMX code now uses vendor specific commands.
This results in endless warnings when booting the Linux kernel.
sdhci-esdhc-imx 2194000.usdhc: esdhc_wait_for_card_clock_gate_off:
card clock still not gate off in 100us!.
Implement support for the vendor specific command implemented in IMX hardware
to be able to avoid this warning.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200603145258.195920-2-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: Fixed 32-bit format string using PRIx32/PRIx64]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Virtual time adjustment was implemented for virt-5.0 machine type,
but the cpu property was enabled only for host-passthrough and max
cpu model. Let's add it for any KVM arm cpu which has the generic
timer feature enabled.
Signed-off-by: Ying Fang <fangying1@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200608121243.2076-1-fangying1@huawei.com
[PMM: minor commit message tweak, removed inaccurate
suggested-by tag]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The hardware supports configurable descriptor sizes, configured in the DBLAC
register.
Most drivers use the default 4 word descriptor, which is currently hardcoded,
but Aspeed SDK configures 8 words to store extra data.
Signed-off-by: Erik Smit <erik.lucas.smit@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[PMM: removed unnecessary parens]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some bits of the CCM registers are non writable.
This was left undone in the initial commit (all bits of registers were
writable).
This patch adds the required code to protect the non writable bits.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 20200608133508.550046-1-jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the Neon VDUP (scalar) insn to decodetree. (Note that we
can't call this just "VDUP" as we used that already in vfp.decode for
the "VDUP (general purpose register" insn.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon VTBL, VTBX instructions to decodetree. The actual
implementation of the insn is copied across to the new trans function
unchanged except for renaming 'tmp5' to 'tmp4'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon VEXT insn to decodetree. Rather than keeping the
old implementation which used fixed temporaries cpu_V0 and cpu_V1
and did the extraction with by-hand shift and logic ops, we use
the TCG extract2 insn.
We don't need to special case 0 or 8 immediates any more as the
optimizer is smart enough to throw away the dead code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon 2-reg-scalar long multiplies to decodetree.
These are the last instructions in the group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VQRDMLAH and VQRDMLSH insns in the 2-reg-scalar
group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VQDMULH and VQRDMULH insns in the 2-reg-scalar group
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the float versions of VMLA, VMLS and VMUL in the Neon
2-reg-scalar group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
As noted in the comment on the WRAP_FP_FN macro, we could have
had a do_2scalar_fp() function, but for 3 insns it seemed
simpler to just do the wrapping to get hold of the fpstatus ptr.
(These are the only fp insns in the group.)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VMLA, VMLS and VMUL insns in the Neon "2 registers and a
scalar" group to decodetree. These are 32x32->32 operations where
one of the inputs is the scalar, followed by a possible accumulate
operation of the 32-bit result.
The refactoring removes some of the oddities of the old decoder:
* operands to the operation and accumulation were often
reversed (taking advantage of the fact that most of these ops
are commutative); the new code follows the pseudocode order
* the Q bit in the insn was in a local variable 'u'; in the
new code it is decoded into a->q
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In commit 37bfce81b1 we accidentally introduced a leak of a TCG
temporary in do_2shift_env_64(); free it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Mark the arrays of function pointers in trans_VSHLL_S_2sh() and
trans_VSHLL_U_2sh() as both 'static' and 'const'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon 3-reg-diff insn polynomial VMULL. This is the last
insn in this group to be converted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon 3-reg-diff insns VQDMULL, VQDMLAL and VQDMLSL:
these are all saturating doubling long multiplies with a possible
accumulate step.
These are the last insns in the group which use the pass-over-each
elements loop, so we can delete that code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon 3-reg-diff insns VMULL, VMLAL and VMLSL; these perform
a 32x32->64 multiply with possible accumulate.
Note that for VMLSL we do the accumulate directly with a subtraction
rather than doing a negate-then-add as the old code did.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the Neon 3-reg-diff insns VABAL and VABDL to decodetree.
Like almost all the remaining insns in this group, these are
a combination of a two-input operation which returns a double width
result and then a possible accumulation of that double width
result into the destination.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the narrow-to-high-half insns VADDHN, VSUBHN, VRADDHN,
VRSUBHN in the Neon 3-registers-different-lengths group to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the "pre-widening" insns VADDL, VSUBL, VADDW and VSUBW
in the Neon 3-registers-different-lengths group to decodetree.
These insns work by widening one or both inputs to double their
size, performing an add or subtract at the doubled size and
then storing the double-size result.
As usual, rather than copying the loop of the original decoder
(which needs awkward code to avoid problems when source and
destination registers overlap) we just unroll the two passes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The widenfn() in do_vshll_2sh() does not free the input 32-bit
TCGv, so we need to do this in the calling code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-59-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-58-armbru@redhat.com>
All remaining conversions to qdev_realize() are for bus-less devices.
Coccinelle script:
// only correct for bus-less @dev!
@@
expression errp;
expression dev;
@@
- qdev_init_nofail(dev);
+ qdev_realize(dev, NULL, &error_fatal);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(dev, true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-56-armbru@redhat.com>
So far, qdev_realize() supports only devices that plug into a bus:
argument @bus cannot be null. Extend it to support bus-less devices,
too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-55-armbru@redhat.com>
init_event_facility() creates the SCLP events bus with two SCLP event
devices (sclpquiesce and sclp-cpu-hotplug). It leaves the devices
unrealized. A comment explains they will be realized "via the bus".
The bus's realize method sclp_events_bus_realize() indeed realizes all
unrealized devices on this bus. It carries a TODO comment claiming
this "has to be done in common code". No other bus realize method
realizes its devices.
The common code in question is bus_set_realized(), which has a TODO
comment asking for recursive realization. It's been asking for years.
The only devices sclp_events_bus_realize() will ever realize are the
two init_event_facility() puts there.
Simplify as follows:
* Make the devices members of the event facility instance struct, just
like the bus. object_initialize_child() is simpler than
object_property_add_child() and object_unref().
* Realize them in the event facility realize method.
This is in line with how such things are done elsewhere.
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-54-armbru@redhat.com>
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-53-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-52-armbru@redhat.com>
This is still the same transformation as in the previous commits, but
here the sysbus_init_child_obj() and its matching realize in are in
separate files. Fortunately, there's just one realize left to
convert.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-51-armbru@redhat.com>
These are init/realize pairs produced by the previous commit's
Coccinelle script where the argument test doesn't quite match. They
need even more careful review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-50-armbru@redhat.com>
This is the same transformation as in the previous commit, except
sysbus_init_child_obj() and realize are too separated for the commit's
Coccinelle script to handle, typically because sysbus_init_child_obj()
is in a device's instance_init() method, and the matching realize is
in its realize() method.
Perhaps a Coccinelle wizard could make it transform that pattern, but
I'm just a bungler, and the best I can do is transforming the two
separate parts separately:
@@
expression errp;
expression child;
symbol true;
@@
- object_property_set_bool(OBJECT(child), true, "realized", errp);
+ sysbus_realize(SYS_BUS_DEVICE(child), errp);
// only correct with a matching sysbus_init_child_obj() transformation!
@@
expression errp;
expression child;
symbol true;
@@
- object_property_set_bool(child, true, "realized", errp);
+ sysbus_realize(SYS_BUS_DEVICE(child), errp);
// only correct with a matching sysbus_init_child_obj() transformation!
@@
expression child;
@@
- qdev_init_nofail(DEVICE(child));
+ sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal);
// only correct with a matching sysbus_init_child_obj() transformation!
@@
expression child;
expression dev;
@@
dev = DEVICE(child);
...
- qdev_init_nofail(dev);
+ sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
// only correct with a matching sysbus_init_child_obj() transformation!
@@
expression child;
identifier dev;
@@
DeviceState *dev = DEVICE(child);
...
- qdev_init_nofail(dev);
+ sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
// only correct with a matching sysbus_init_child_obj() transformation!
@@
expression parent, name, size, type;
expression child;
symbol true;
@@
- sysbus_init_child_obj(parent, name, child, size, type);
+ sysbus_init_child_XXX(parent, name, child, size, type);
@@
expression parent, propname, type;
expression child;
@@
- sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type)
+ object_initialize_child(parent, propname, child, type)
@@
expression parent, propname, type;
expression child;
@@
- sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type)
+ object_initialize_child(parent, propname, &child, type)
This script is *unsound*: we need to manually verify init and realize
conversions are properly paired.
This commit has only the pairs where object_initialize_child()'s
@child and sysbus_realize()'s @dev argument text match exactly within
the same source file.
Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
The "null @bus means main system bus" convenience feature is no longer
used. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-47-armbru@redhat.com>
Sysbus devices almost always plug into the main system bus.
qdev_create() even has a convenience feature to make that easy: a null
bus argument gets replaced by the main system bus. qdev_realize() and
qdev_realize_and_unref() do the same.
We can do better. Provide convenience wrappers around qdev_realize()
and qdev_realize_and_unref() that don't take a @bus argument. They
always pass the main system bus.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-45-armbru@redhat.com>
The callers of sysbus_init_child_obj() commonly pass either &child,
sizeof(child), or pchild, sizeof(*pchild). Tidy up the few that use
something else instead, mostly to keep future commits simpler.
Coccinelle script:
@@
expression parent, propname, type;
expression child;
type T;
T proxy;
@@
(
sysbus_init_child_obj(parent, propname, &child, sizeof(child), type)
|
sysbus_init_child_obj(parent, propname, child, sizeof(*child), type)
|
- sysbus_init_child_obj(parent, propname, child, sizeof(proxy), type)
+ sysbus_init_child_obj(parent, propname, child, sizeof(*child), type)
)
This script is *unsound*: for each change we need to verify the
@childsize argument stays the same. I did.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-44-armbru@redhat.com>
