# By Paolo Bonzini (12) and others
# Via Paolo Bonzini
* bonzini/iommu-for-anthony: (25 commits)
memory: render_memory_region: factor out fr constant setters
memory: as_update_topology_pass: Improve comments
memory: Fix comment typo
memory: give name to every AddressSpace
dma: eliminate DMAContext
spapr_vio: take care of creating our own AddressSpace/DMAContext
pci: use memory core for iommu support
dma: eliminate old-style IOMMU support
spapr: use memory core for iommu support
spapr: make IOMMU translation go through IOMMUTLBEntry
spapr: convert TCE API to use an opaque type
vfio: abort if an emulated iommu is used
memory: Add iommu map/unmap notifiers
memory: iommu support
memory: make section size a 128-bit integer
exec: reorganize mem_add to match Int128 version
Revert "s390x: reduce TARGET_PHYS_ADDR_SPACE_BITS to 62"
Revert "memory: limit sections in the radix tree to the actual address space size"
exec: return MemoryRegion from address_space_translate
exec: Implement subpage_read/write via address_space_rw
...
Message-id: 1371739493-10187-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Bas van Sisseren (1) and Gertjan Halkes (1)
# Via Jan Kiszka
* kiszka/queues/slirp:
make user networking hostfwd work with restrict=y
fix -net user checks by reordering checks
Message-id: cover.1371638848.git.jan.kiszka@siemens.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These 4 replicated lines set properties of fr that are constant over
the course of the function. Factor out their repeated setting (and also
guards against them being set multiple times in the loop below).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These comments were a little difficult to read. First one had
incorrect parenthesis. The part about attributes changing is
really applicable to the region being 'in both' rather than 'in
new'
Second comment has an obscure parenthetic about 'Logging may have
changed'. Made clearer, as this if is supposed to handle the case where
the memory region is unchanged (with the notable exception re logging).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "info mtree" command in QEMU console prints only "memory" and "I/O"
address spaces while there are actually a lot more other AddressSpace
structs created by PCI and VIO devices. Those devices do not normally
have names and therefore not present in "info mtree" output.
The patch fixes this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The DMAContext is a simple pointer to an AddressSpace that is now always
already available. Make everyone hold the address space directly,
and clean up the DMA API to use the AddressSpace directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fetch the root region from the sPAPRTCETable, and use it to build
an AddressSpace and DMAContext.
Now, everywhere we have a DMAContext we also have access to the
corresponding AddressSpace (either because we create it just before
the DMAContext, or because dma_context_memory's AddressSpace is
trivially address_space_memory).
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the new iommu support in the memory core for iommu support. The only
user, spapr, is also converted, but it still provides a DMAContext
interface until the non-PCI bits switch to AddressSpace.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
[ Do not calls memory_region_del_subregion() on the device's
bus_master_enable_region, it is an alias; return an AddressSpace
from the IOMMU hook and remove the destructor hook. - David Gibson ]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The translate function in the DMAContext is now always NULL.
Remove every reference to it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now we can stop using a "translating" DMAContext, but we do not yet modify
the sPAPRTCETable users to get an AddressSpace; they keep using the table
via a DMAContext.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The next step is to introduce the translation code that will be used for
IOMMU MemoryRegions, but still do the actual translation in a DMAContext.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TCE table is currently returned as a DMAContext, and non-type-safe
APIs are called later passing back the DMAContext. Since we want to move
away from DMAContext, use an opaque type instead, and add an accessor
to retrieve the DMAContext from it.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
vfio doesn't support guest iommus yet, indicate it to the user
by gently depositing a core on their disk.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a NotifierList to MemoryRegions which represent IOMMUs
allowing other parts of the code to register interest in mappings or
unmappings from the IOMMU. All IOMMU implementations will need to call
memory_region_notify_iommu() to inform those waiting on the notifier list,
whenever an IOMMU mapping is made or removed.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new memory region type that translates addresses it is given,
then forwards them to a target address space. This is similar to
an alias, except that the mapping is more flexible than a linear
translation and trucation, and also less efficient since the
translation happens at runtime.
The implementation uses an AddressSpace mapping the target region to
avoid hierarchical dispatch all the way to the resolved region; only
iommu regions are looked up dynamically.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
[Modified to put translation in address_space_translate; assume
IOMMUs are not reachable from TCG. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So far, the size of all regions passed to listeners could fit in 64 bits,
because artificial regions (containers and aliases) are eliminated by
the memory core, leaving only device regions which have reasonable sizes
An IOMMU however cannot be eliminated by the memory core, and may have
an artificial size, hence we may need 65 bits to represent its size.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When adding support for 2^64-byte sections, we will have to change
the structure of mem_add to avoid failures in int128_get64.
Reorganize the code now before introducing Int128.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only address_space_translate_for_iotlb needs to return the section.
Every caller of address_space_translate now uses only section->mr,
return it directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will allow to add support for unaligned memory regions: the subpage
container region can activate unaligned support unconditionally because
the read/write handler will now ensure that accesses are split as
required by calling address_space_rw. We can furthermore drop the
special handling of RAM subpages, address_space_rw takes care of this
already.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Except for the case of setting the IOTLB entry in TCG mode, we can avoid
the subpage dispatching handlers and do the resolution directly on
address_space_lookup_region. An IOTLB entry describes a full page, not
only the region that the first access to a sub-divided page may return.
This patch therefore introduces a special translation function,
address_space_translate_for_iotlb, that avoids the subpage resolutions.
In contrast, callers of the existing address_space_translate service
will now always receive the terminal memory region section. This will be
important for breaking the BQL and for enabling unaligned memory region.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be needed for some corner cases with para-virtual I/O ports.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This introduces a wrapper for phys_page_find (before we complicate
address_space_translate with IOMMU translation). This function will
also encapsulate locking and reference counting when we introduce
BQL-free dispatching.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The memory API allows a MemoryRegion's size to be 2^64, as a special
case (otherwise the size always fits in a 64 bit integer). This meant
that attempts to access address zero in a 2^64 sized region would
assert in address_space_translate():
#3 0x00007ffff3e4d192 in __GI___assert_fail#(assertion=0x555555a43f32
"!a.hi", file=0x555555a43ef0 "include/qemu/int128.h", line=18,
function=0x555555a4439f "int128_get64") at assert.c:103
#4 0x0000555555877642 in int128_get64 (a=...)
at include/qemu/int128.h:18
#5 0x00005555558782f2 in address_space_translate (as=0x55555668d140,
/addr=0, xlat=0x7fffafac9918, plen=0x7fffafac9920, is_write=false)
at exec.c:221
Fix this by doing the 'min' operation in 128 bit arithmetic
rather than 64 bit arithmetic (we know the result of the 'min'
definitely fits in 64 bits because one of the inputs did).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Manual page and qemu-doc on talk about "Bochs BIOS". We use SeaBIOS,
and it implements the feature. Replace by just "BIOS", and drop the
TODO line wondering about the Bochs reference.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Option -no-fd-bootchk asks the BIOS to attempt booting from a floppy
even when the boot sector signature isn't there, by setting a bit in
RTC CMOS. It was added back in 2006 (commit 52ca8d6a).
Two years later, commit 0ecdffbb added monitor command boot_set.
Implemented by new function pc_boot_set(). It unconditionally clears
the floppy signature bit in CMOS.
Commit e0f084bf added -boot option once to automatically change the
boot order on first reset. Reuses pc_boot_set(), thus also clears the
floppy signature bit. Commit d9346e81 took care to preserve this
behavior.
Thus, -no-fd-bootchk applies to any number of boots. Except it
applies just to the first boot with -boot once, and never after
boot_set. Weird. Make it stick instead: set the bit according to
-no-fd-bootchk in pc_boot_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-6-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Option "once" sets up a different boot order just for the initial
boot. Boot order reverts back to normal on reset. Option "order"
changes the normal boot order.
The reversal is implemented by reset handler restore_boot_devices(),
which takes the boot order to revert to as argument.
restore_boot_devices() does nothing on its first call, because that
must be the initial machine reset. On its second call, it changes the
boot order back, and unregisters itself.
Because we register the handler right when -boot gets parsed, we can
revert to an incorrect normal boot order, and multiple -boot can
interact in funny ways.
Here's how things work without -boot once or order:
* boot_devices is "".
* main() passes machine->boot_order to to machine->init(), because
boot_devices is "". machine->init() configures firmware
accordingly. For PC machines, machine->boot_order is "cad", and
pc_cmos_init() writes it to RTC CMOS, where SeaBIOS picks it up.
Now consider -boot order=:
* boot_devices is "".
* -boot order= sets boot_devices to "" (no change).
* main() passes machine->boot_order to to machine->init(), because
boot_devices is "", as above.
Bug: -boot order= has no effect. Broken in commit e4ada29e.
Next, consider -boot once=a:
* boot_devices is "".
* -boot once=a registers restore_boot_devices() with argument "", and
sets boot_devices to "a".
* main() passes boot_devices "a" to machine->init(), which configures
firmware accordingly. For PC machines, pc_cmos_init() writes the
boot order to RTC CMOS.
* main() calls qemu_system_reset(). This runs reset handlers.
- restore_boot_devices() gets called with argument "". Does
nothing, because it's the first call.
* Machine boots, boot order is "a".
* Machine resets (e.g. monitor command). Reset handlers run.
- restore_boot_devices() gets called with argument "". Calls
qemu_boot_set("") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
Bug: boot order reverts to "" instead of machine->boot_order. The
actual boot order depends on how firmware interprets "". Broken
in commit e4ada29e.
Next, consider -boot once=a -boot order=c:
* boot_devices is "".
* -boot once=a registers restore_boot_devices() with argument "", and
sets boot_devices to "a".
* -boot order=c sets boot_devices to "c".
* main() passes boot_devices "c" to machine->init(), which configures
firmware accordingly. For PC machines, pc_cmos_init() writes the
boot order to RTC CMOS.
* main() calls qemu_system_reset(). This runs reset handlers.
- restore_boot_devices() gets called with argument "". Does
nothing, because it's the first call.
* Machine boots, boot order is "c".
Bug: it should be "a". I figure this has always been broken.
* Machine resets (e.g. monitor command). Reset handlers run.
- restore_boot_devices() gets called with argument "". Calls
qemu_boot_set("") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
Bug: boot order reverts to "" instead of "c". I figure this has
always been broken, just differently broken before commit
e4ada29e.
Next, consider -boot once=a -boot once=b -boot once=c:
* boot_devices is "".
* -boot once=a registers restore_boot_devices() with argument "", and
sets boot_devices to "a".
* -boot once=b registers restore_boot_devices() with argument "a", and
sets boot_devices to "b".
* -boot once=c registers restore_boot_devices() with argument "b", and
sets boot_devices to "c".
* main() passes boot_devices "c" to machine->init(), which configures
firmware accordingly. For PC machines, pc_cmos_init() writes the
boot order to RTC CMOS.
* main() calls qemu_system_reset(). This runs reset handlers.
- restore_boot_devices() gets called with argument "". Does
nothing, because it's the first call.
- restore_boot_devices() gets called with argument "a". Calls
qemu_boot_set("a") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
- restore_boot_devices() gets called with argument "b". Calls
qemu_boot_set("b") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
* Machine boots, boot order is "b".
Bug: should really be "c", because that came last, and for all other
-boot options, the last one wins. I figure this was broken some
time before commit 37905d6a, and fixed there only for a single
occurence of "once".
* Machine resets (e.g. monitor command). Reset handlers run.
- restore_boot_devices() gets called with argument "". Calls
qemu_boot_set("") to reconfigure firmware. For PC machines,
pc_boot_set() writes it into RTC CMOS. Reset handler
unregistered.
Same bug as above: boot order reverts to "" instead of
machine->boot_order.
Fix by acting upon -boot options order, once and menu only after
option parsing is complete, and the machine is known. This is how the
other -boot options work already.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 3d3b8303 threw in some QemuOpts parsing without replacing the
existing ad hoc parser, resulting in a confusing mess. Clean it up.
Two user-visible changes:
1. Invalid options are reported more nicely. Before:
qemu: unknown boot parameter 'x' in 'x=y'
After:
qemu-system-x86_64: -boot x=y: Invalid parameter 'x'
2. If -boot is given multiple times, options accumulate, just like for
-machine. Before, only options order, once and menu accumulated.
For the other ones, all but the first -boot in non-legacy syntax
got simply ignored.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch allows the hostfwd option to override the restrict=y setting in
the user network stack, as explicitly stated in the documentation on the
restrict option:
restrict=on|off
If this option is enabled, the guest will be isolated, i.e. it
will not be able to contact the host and no guest IP packets
will be routed over the host to the outside. This option does
not affect any explicitly set forwarding rules.
Qemu bug tracker:
https://bugs.launchpad.net/qemu/+bug/829455
Signed-off-by: Gertjan Halkes <qemu@ghalkes.nl>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
reorder slirp config options. first check the dns-server-address,
then check the first-dhcp-address. the original code was comparing
the first-dhcp-address with the default dns-server-address, not
the configured dns-server-address.
Signed-off-by: Bas van Sisseren <bas@quarantainenet.nl>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
When this VMSD was introduced it's version fields were set to
sizeof(I6300State), making them essentially random from build to build,
version to version.
To fix this, we lock in a high version id and low minimum version id to
support old->new migration from all prior versions of this device's
state. This should work since the device state has not changed since
its introduction.
The potentially breaks migration from 1.5+ to 1.5, but since the
versioning was essentially random prior to this patch, new->old
migration was not consistently functional to begin with.
Reported-by: Nicholas Thomas <nick@bytemark.co.uk>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Paolo Bonzini (3) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
iscsi: reorganize iscsi_readcapacity_sync
iscsi: simplify freeing of tasks
vhost-scsi: fix k->set_guest_notifiers() NULL dereference
scsi-disk: scsi-block device for scsi pass-through should not be removable
scsi-generic: check the return value of bdrv_aio_ioctl in execute_command
scsi-generic: fix sign extension of READ CAPACITY(10) data
scsi: reset cdrom tray statuses on scsi_disk_reset
Message-id: 1371565016-2643-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Ján Tomko
# Via Paolo Bonzini
* bonzini/nbd-next:
nbd: strip braces from literal IPv6 address in URI
qemu-socket: allow hostnames starting with a digit
'default_backend' isn't always set, but 'rng' is, so use that.
$ ./x86_64-softmmu/qemu-system-x86_64 -object rng-random,id=rng0,filename=/dev/random -device virtio-rng-pci,rng=rng0
Segmentation fault (core dumped)
Regressed with virtio refactoring in 59ccd20a9a
CC: qemu-stable@nongnu.org
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: bf4505014a0a941dbd3c62068f3cf2c496b69e6a.1370023944.git.crobinso@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid the goto, and use the same retry logic for the 10- and 16-
byte versions.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Always free them in the iscsi_aio_*_acb functions and remove the
checks in their callers. Remove ifs when the task struct was
previously dereferenced (spotted by Coverity).
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity picked up a copy-paste bug. In vhost_scsi_start() we check for
!k->set_guest_notifiers and error out. The check probably got copied
but instead of erroring we actually use the function pointer!
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Asias He <asias@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a new SCSI_DISK_F_NO_REMOVABLE_DEVOPS feature. By this
feature we can set that the scsi-block (scsi pass-through) device will still
be removable from the guest side, but from monitor it cannot be removed.
Cc: qemu-stable@nongnu.org
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes the bug introduced by this commit ad54ae80c7.
The bdrv_aio_ioctl() still could return null and we should return an error
in that case.
Cc: qemu-stable@nongnu.org
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Issuing the READ CAPACITY(10) command in the guest will cause QEMU
to update its knowledge of the maximum accessible LBA in the disk.
The recorded maximum LBA will be wrong if the disk is bigger than
1TB, because ldl_be_p returns a signed int.
When this is fixed, a latent bug will be unmasked. If the READ
CAPACITY(10) command reported an overflow (0xFFFFFFFF), we must
not overwrite the previously-known maximum accessible LBA, or the guest
will fail to access the disk above the first 2TB.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tray statuses should be also reset. Some guests may lock the tray and
right after resetting the guest it should be unlocked and closed. This
is done on power-on, reset and resume from suspend/hibernate on bare-metal.
This fix is already committed for IDE CD.
Check the commit a7f3d65b65.
Test results on bare-metal:
- on reset/power-on the CD-ROM tray is closed even before the monitor
is turned on
- on resume from suspend/hibernate the tray is also closed before
the monitor is turned on
From test results it seems that this behavior is OS and probably BIOS
independent.
Cc: qemu-stable@nongnu.org
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Otherwise they would get passed to getaddrinfo and fail with:
address resolution failed for [::1]🔢 Name or service not known
(Broken by commit v1.4.0-736-gf17c90b)
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to RFC 1123 [1], hostnames can start with a digit too.
[1] http://tools.ietf.org/html/rfc1123#page-13
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Cc: qemu-stable@nongnu.org
[Use strspn, not strcspn. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
