Include the list of available targets in the --help output
for the --target-list= option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
PPC: Qdev'ify e500 pci
PPC MPC7544DS: Use new TLB helper function
PPC: Implement e500 (FSL) MMU
PPC: Add another 64 bits to instruction feature mask
PPC: Add GS MSR definition
PPC: Make MPC8544DS emulation work w/o KVM
PPC: Make MPC8544DS obey -cpu switch
Fix off-by-one error in sizing pSeries hcall table
ppc64: Fix out-of-tree builds
kvm: ppc: warn user on PAGE_SIZE mismatch
kvm: ppc: detect old headers
monitor: add PPC BookE SPRs
kvm: ppc: fixes for KVM_SET_SREGS on init
ppc64: Don't try to build sPAPR RTAS on Darwin
Place pseries vty devices at addresses more similar to existing machines
Make pSeries 'model' property more closely resemble real hardware
pseries: Increase maximum CPUs to 256
On ppc64 host, recursion into pc-bios/spapr-rtas/ fails for
out-of-tree builds. Add missing dir and symlink.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
When compiling Qemu with older kernel headers, the PVR setting
mechanism isn't available yet. Unfortunately, back then I didn't add
a capability we could check against, so all we can do is add a configure
test to see if we support PVR setting. For BookE, we don't care yet.
This fixes compilation errors with KVM enabled on older kernel headers
(like 2.6.32).
Signed-off-by: Alexander Graf <agraf@suse.de>
The Darwin assembler fails to build it.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
With MapCache, we can handle a 64b target, even with a 32b host/qemu.
So, we need to have target_phys_addr_t to 64bits.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
On IA32 host or IA32 PAE host, at present, generally, we can't create
an HVM guest with more than 2G memory, because generally it's almost
impossible for Qemu to find a large enough and consecutive virtual
address space to map an HVM guest's whole physical address space.
The attached patch fixes this issue using dynamic mapping based on
little blocks of memory.
Each call to qemu_get_ram_ptr makes a call to qemu_map_cache with the
lock option, so mapcache will not unmap these ram_ptr.
Blocks that do not belong to the RAM, but usually to a device ROM or to
a framebuffer, are handled in a separate function. So the whole RAMBlock
can be map.
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch updates the libxenctrl calls in Qemu to use the new interface,
otherwise Qemu wouldn't be able to build against new versions of the
library.
We check libxenctrl version in configure, from Xen 3.3.0 to Xen
unstable.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we start adding more files related to 9pfs
it make sense to move them to a separate directory
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Because the opengl library is only linked to for the lm32 target, we can
now safely enable opengl by default again.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch is the first attempt to make configure more intelligent with
regard to how it links to libraries. It divides the softmmu libraries into
two lists, a general one and a list which depends on the target
architecture.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Work around a SPARC glibc bug which caused the epoll_create1 configure
test to wrongly claim that the function was present. Some versions of
SPARC glibc provided the function in the library but didn't declare
it in the include file; the result is that gcc warns about an implicit
declaration but a link succeeds. So we reference the function as a
value rather than a function call to induce a compile time error
if the declaration was not present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This increase the correctness (precision, NaN values, corner cases) on
non-x86 machines, and add the possibility to handle the exception
correctly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There is a bug in nvidia's binary GPU driver, which causes a segmentation
fault if linked to libGL.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The alignment for longs on s390x is 8. That's the only place where it differs
from the default alignments found in configure already. The example alignment
program from Laurent printed the following on a real s390x:
alignof(short) 2
alignof(int) 4
alignof(long) 8
alignof(long long) 8
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
basename prints a missing-argument error when sdlconfig is empty
and we're cross-compiling.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Standard autoconf scripts include a --version flag so people can easily
query things. Add this to qemu's configure so it too can integrate with
build systems that have standard autotool helpers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch introduce a new config option CONFIG_OPENGL.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for the Milkymist AC97 compatible sound output and
input core.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
S390x user emulation can do nptl. Reflect this in the configure script.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
libcacard emulates a Common Access Card (CAC) which is a standard
for smartcards. It is used by the emulated ccid card introduced in
a following patch. Docs are available in docs/libcacard.txt
Signed-off-by: Alon Levy <alevy@redhat.com>
---
changes from v24->v25:
* Fix out of tree builds.
* Fix build with linux-user targets.
changes from v23->v24: (Jes Sorensen review 2)
* Makefile.target: use obj-$(CONFIG_*) +=
* remove unrequired includes, include qemu-common before qemu-thread
* required adding #define NO_NSPR_10_SUPPORT (harmless)
changes from v22->v23:
* configure fixes: (reported by Stefan Hajnoczi)
* test a = b, not a == b (second isn't portable)
* quote $source_path in case it contains spaces
- this doesn't really help since there are many other places
that need similar fixes, not introduced by this patch.
changes from v21->v22:
* fix configure to not link libcacard if nss not found
(reported by Stefan Hajnoczi)
* fix vscclient linkage with simpletrace backend
(reported by Stefan Hajnoczi)
* card_7816.c: add missing break in ERROR_DATA_NOT_FOUND
(reported by William van de Velde)
changes from v20->v21: (Jes Sorensen review)
* use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc
and qemu_free), error_report
* assert instead of ASSERT
* cosmetic fixes
* use strpbrk and isspace
* add --disable-nss --enable-nss here, instead of in the final patch.
* split vscclient, passthru and docs to following patches.
changes from v19->v20:
* checkpatch.pl
changes from v15->v16:
Build:
* don't erase self with distclean
* fix make clean after make distclean
* Makefile: make vscclient link quiet
Behavioral:
* vcard_emul_nss: load coolkey in more situations
* vscclient:
* use hton,ntoh
* send init on connect, only start vevent thread on response
* read payload after header check, before type switch
* remove Reconnect
* update for vscard_common changes, empty Flush implementation
Style/Whitespace:
* fix wrong variable usage
* remove unused variable
* use only C style comments
* add copyright header
* fix tabulation
Signed-off-by: Alon Levy <alevy@redhat.com>
libcacard: fix out of tree builds
A CCID device is a smart card reader. It is a USB device, defined at [1].
This patch introduces the usb-ccid device that is a ccid bus. Next patches will
introduce two card types to use it, a passthru card and an emulated card.
[1] http://www.usb.org/developers/devclass_docs/DWG_Smart-Card_CCID_Rev110.
Signed-off-by: Alon Levy <alevy@redhat.com>
---
changes from v20->v21: (Jes Sorenson review)
* cosmetic changes - fix multi line comments.
* reorder fields in USBCCIDState
* add reference to COPYING
* add --enable-smartcard and --disable-smartcard here (moved
from last patch)
changes from v19->v20:
* checkpatch.pl
changes from v18->v19:
* merged: ccid.h: add copyright, fix define and remove non C89 comments
* add qdev.desc
changes from v15->v16:
Behavioral changes:
* fix abort on client answer after card remove
* enable migration
* remove side affect code from asserts
* return consistent self-powered state
* mask out reserved bits in ccid_set_parameters
* add missing abRFU in SetParameters (no affect on linux guest)
whitefixes / comments / consts defines:
* remove stale comment
* remove ccid_print_pending_answers if no DEBUG_CCID
* replace printf's with DPRINTF, remove DEBUG_CCID, add verbosity defines
* use error_report
* update copyright (most of the code is not original)
* reword known bug comment
* add missing closing quote in comment
* add missing whitespace on one line
* s/CCID_SetParameter/CCID_SetParameters/
* add comments
* use define for max packet size
Comment for "return consistent self-powered state":
the Configuration Descriptor bmAttributes claims we are self powered,
but we were returning not self powered to USB_REQ_GET_STATUS control message.
In practice, this message is not sent by a linux 2.6.35.10-74.fc14.x86_64
guest (not tested on other guests), unless you issue lsusb -v as root (for
example).
On pSeries machines, operating systems can instantiate "RTAS" (Run-Time
Abstraction Services), a runtime component of the firmware which implements
a number of low-level, infrequently used operations. On logical partitions
under a hypervisor, many of the RTAS functions require hypervisor
privilege. For simplicity, therefore, hypervisor systems typically
implement the in-partition RTAS as just a tiny wrapper around a hypercall
which actually implements the various RTAS functions.
This patch implements such a hypercall based RTAS for our emulated pSeries
machine. A tiny in-partition "firmware" calls a new hypercall, which
looks up available RTAS services in a table.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
rbd support tries to both link with -lrados and -lcrypto. While the
first one is of course necessary, the second is not necessary (only
librados ifself needs to link with libcrypto).
This fixes a licensing issue: qemu as a whole is GPL v2, and thus can't
be linked with OpenSSL without an exception in the license, which seems
difficult to get given the number of persons involved.
Cc: Christian Brunner <chb@muc.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
MinGW optionally includes pdcurses, so add support for it.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
libiberty.a is part of MinGW and provides useful functions
like ffs (MinGW) and getopt (MinGW-w64).
It is needed for w64 compilations and allows simpler code for w32.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qemu i386 used to support more than 4GB of RAM through PAE, but it has
been disabled for an unknown reason. Reenable it.
Note that simply running qemu x86_64 and emulating a 32-bit CPU is not
a solution to this problem as it is about 15% slower (it needs to
emulate 64 bit registers even if half of them are not used). On the
other hand, I haven't seen any measurable impact by switching
target_phys_bits to 64.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Support the epoll family of syscalls: epoll_create(), epoll_create1(),
epoll_ctl(), epoll_wait() and epoll_pwait(). Note that epoll_create1()
and epoll_pwait() are later additions, so we have to test separately
in configure for their presence.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Found by Stefan Hajnoczi: There is a race in kvm_cpu_exec between
checking for exit_request on vcpu entry and timer signals arriving
before KVM starts to catch them. Plug it by blocking both timer related
signals also on !CONFIG_IOTHREAD and process those via signalfd.
As this fix depends on real signalfd support (otherwise the timer
signals only kick the compat helper thread, and the main thread hangs),
we need to detect the invalid constellation and abort configure.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This backend sends trace events to standard error output during the emulation.
Also add a "--list-backends" option to tracetool, so configure script can
display the list of available backends.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Non-existent $pkgconfig instead of $pkg_config was used when configure
probes for spice availability.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of splattering the code with #ifdefs and runtime checks for
capabilities we cannot work without anyway, provide central test
infrastructure for verifying their availability both at build and
runtime.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Make use of the new KVM_NMI IOCTL to send NMIs into the KVM guest if the
user space raised them. (example: qemu monitor's "nmi" command)
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We need to be able to catch exceptions correctly and thus enable softfloat
on SH4.
As all machines except i386 and x86_64 are using softfloat, make it the
default and change the case to detect i386 and x86_64. Note that CRIS
doesn't have an FPU, so it can be configured with both softfloat-native
and softfloat.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since commit d1807a4f83 ./configure tries
to test files and directories with "test -f", which only test for regular
files. Test with "test -e", which looks for any kind of files.
This unbreak the configure script when not using a separate object
directory.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
These are not in any release, so I am just renaming them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This will help getting config.guess and config.sub from the srcdir.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
