Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adding a lookup table for the powers of two, with the appropriate size
prefixes. This is needed when a size has to be stringified, in which
case something like '(1 * KiB)' would become a literal '(1 * (1L << 10))'
string. Powers of two are used very often for sizes, so such a table
will also make it easier and more intuitive to write them.
This table is generatred using the following AWK script:
BEGIN {
suffix="KMGTPE";
for(i=10; i<64; i++) {
val=2**i;
s=substr(suffix, int(i/10), 1);
n=2**(i%10);
pad=21-int(log(n)/log(10));
printf("#define S_%d%siB %*d\n", n, s, pad, val);
}
}
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
'detect-zeroes' is one of the basic BlockdevOptions available for all
drivers, but it's not handled by bdrv_reopen_prepare(), so any attempt
to change it results in an error:
(qemu) qemu-io virtio0 "reopen -o detect-zeroes=on"
Cannot change the option 'detect-zeroes'
Since there's no reason why we shouldn't allow changing it and the
implementation is simple let's just do it.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
'discard' is one of the basic BlockdevOptions available for all
drivers, but it's not handled by bdrv_reopen_prepare() so any attempt
to change it results in an error:
(qemu) qemu-io virtio0 "reopen -o discard=on"
Cannot change the option 'discard'
Since there's no reason why we shouldn't allow changing it and the
implementation is simple let's just do it.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The file-posix code is used for the "file", "host_device" and
"host_cdrom" drivers, and it allows reopening images. However the only
option that is actually processed is "x-check-cache-dropped", and
changes in all other options (e.g. "filename") are silently ignored:
(qemu) qemu-io virtio0 "reopen -o file.filename=no-such-file"
While we could allow changing some of the other options, let's keep
things as they are for now but return an error if the user tries to
change any of them.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_reopen_prepare() function checks all options passed to each
BlockDriverState (in the reopen_state->options QDict) and makes all
necessary preparations to apply the option changes requested by the
user.
Options are removed from the QDict as they are processed, so at the
end of bdrv_reopen_prepare() only the options that can't be changed
are left. Then a loop goes over all remaining options and verifies
that the old and new values are identical, returning an error if
they're not.
The problem is that at the moment there are options that are removed
from the QDict although they can't be changed. The consequence of this
is any modification to any of those options is silently ignored:
(qemu) qemu-io virtio0 "reopen -o discard=on"
This happens when all options from bdrv_runtime_opts are removed
from the QDict but then only a few of them are processed. Since
it's especially important that "node-name" and "driver" are not
changed, the code puts them back into the QDict so they are checked
at the end of the function. Instead of putting only those two options
back into the QDict, this patch puts all unprocessed options using
qemu_opts_to_qdict().
update_flags_from_options() also needs to be modified to prevent
BDRV_OPT_CACHE_NO_FLUSH, BDRV_OPT_CACHE_DIRECT and BDRV_OPT_READ_ONLY
from going back to the QDict.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the previous patches we removed all child references from
bs->{options,explicit_options} because keeping them is useless and
wrong.
Because of this, any attempt to reopen a BlockDriverState using a
child reference as one of its options would result in a failure,
because bdrv_reopen_prepare() would detect that there's a new option
(the child reference) that wasn't present in bs->options.
But passing child references on reopen can be useful. It's a way to
specify a BDS's child without having to pass recursively all of the
child's options, and if the reference points to a different BDS then
this can allow us to replace the child.
However, replacing the child is something that needs to be implemented
case by case and only when it makes sense. For now, this patch allows
passing a child reference as long as it points to the current child of
the BlockDriverState.
It's also important to remember that, as a consequence of the
previous patches, this child reference will be removed from
bs->{options,explicit_options} after the reopening has been completed.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the previous patch we removed child references from bs->options, so
there's no need to look for them here anymore.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block drivers allow opening their children using a reference to an
existing BlockDriverState. These references remain stored in the
'options' and 'explicit_options' QDicts, but we don't need to keep
them once everything is open.
What is more important, these values can become wrong if the children
change:
$ qemu-img create -f qcow2 hd0.qcow2 10M
$ qemu-img create -f qcow2 hd1.qcow2 10M
$ qemu-img create -f qcow2 hd2.qcow2 10M
$ $QEMU -drive if=none,file=hd0.qcow2,node-name=hd0 \
-drive if=none,file=hd1.qcow2,node-name=hd1,backing=hd0 \
-drive file=hd2.qcow2,node-name=hd2,backing=hd1
After this hd2 has hd1 as its backing file. Now let's remove it using
block_stream:
(qemu) block_stream hd2 0 hd0.qcow2
Now hd0 is the backing file of hd2, but hd2's options QDicts still
contain backing=hd1.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The default value of x-check-cache-dropped is false. There's no reason
to use the previous value as a default in raw_reopen_prepare() because
bdrv_reopen_queue_child() already takes care of putting the old
options in the BDRVReopenState.options QDict.
If x-check-cache-dropped was previously set but is now missing from
the reopen QDict then it should be reset to false.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
"qemu-io reopen" doesn't allow changing the writethrough setting of
the cache, but the check is wrong, causing an error even on a simple
reopen with the default parameters:
$ qemu-img create -f qcow2 hd.qcow2 1M
$ qemu-system-x86_64 -monitor stdio -drive if=virtio,file=hd.qcow2
(qemu) qemu-io virtio0 reopen
Cannot change cache.writeback: Device attached
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image locking errors happening at device initialization time doesn't say
which file cannot be locked, for instance,
-device scsi-disk,drive=drive-1: Failed to get shared "write" lock
Is another process using the image?
could refer to either the overlay image or its backing image.
Hoist the error_append_hint to the caller of raw_check_lock_bytes where
file name is known, and include it in the error hint.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allows to set the option on the command line, i.e. "-display
gtk,zoom-to-fit={on,off}", overriding the default chosen by qemu.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20180827095620.26774-1-kraxel@redhat.com
VNC server is calling sasl_server_init() during startup of QEMU, even
if SASL auth has not been enabled.
This may create undesirable warnings like "Could not find keytab file:
/etc/qemu/krb5.tab" when the user didn't configure SASL on host and
started VNC server.
Instead, only initialize SASL when needed. Note that HMP/QMP "change
vnc" calls vnc_display_open() again, which will initialize SASL if
needed.
Fix assignment in if condition, while touching this code.
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1609327
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180907063634.359-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Otherwise sdl2 will show no window in case no graphical
display device is present.
Reproducer: qemu -nodefaults -display sdl -serial vc
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180912114300.6976-1-kraxel@redhat.com
USB frame rate is slightly lower than 1kHz: ie. ~950Hz.
Thus usb-audio device is not able to perform a simple audio playback
without underruns on audio backend.
eg. "-device pci-ohci,id=ohci -device usb-audio,bus=ohci.0" vs PulseAudio
backend. more than 50 underruns are observed per second.
Update ohci_sof_time computation, using QEMU_CLOCK_VIRTUAL in
ohci_usb_start(), and increment by usb_frame_time in ohci_sof()
makes USB frame rate close to 1kHz.
This way, no audio underrun are observed during audio playback.
Signed-off-by: Miguel GAIO <mgaio35@gmail.com>
Message-Id: <20180927151936.3647-1-mgaio35@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Stale values in this field may result in qemu
expecting more data on the next operation
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20180907220851.9658-4-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Return STORE_FULL if we can't write all the bytes but
return incomplete transfer if data received is less then
what was specified in the metadata. Also, use d->offset
as the file size which is valid for all file sizes.
Signed-off-by: Bandan <bsd@redhat.com>
Message-id: 20180907220851.9658-2-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes for external clients; add reminder to revisit naming of x- command
- Vladimir Sementsov-Ogievskiy: nbd/server: send more than one extent of base:allocation context
- John Snow: qapi: bitmap-merge: document name change
- Vladimir Sementsov-Ogievskiy: nbd/server: fix bitmap export
-----BEGIN PGP SIGNATURE-----
Comment: Public key at http://people.redhat.com/eblake/eblake.gpg
iQEcBAABCAAGBQJbrEMDAAoJEKeha0olJ0NqVUMIAIsPETUWAbMbulGYqO9Q4HDz
VCAJDYWW8QbxIngO1pXrfno7+VGfs6jN5H2FIc8fTQNh4hFQkDYTSn0PBoGQQifH
BcS9aevHADGOqgx1E/i0trBBtSagrYcig5ZbPQnm3gNO0u7c2Mwrddy550QQDGI2
LT+0ta1lbDRxiMZXkTg7HB2Q3iYjZHdweLLJdGSpalYyXN95A5H2RsyCALA6Y0oS
+lrYEoNyGqSNhgqVe/kRgvz4t9CsJ3fam/Y7JVmL/s43WvkdODpaEcEDiZRosQuo
NbC+kD3t5qvElkPZUS4yqMXmjVCJpzW8ijLh3H1CSBwLjB4b2tLAEi83xeNQPRo=
=6Q7H
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-09-26' into staging
nbd patches for 2018-09-26
Fixes for external clients; add reminder to revisit naming of x- command
- Vladimir Sementsov-Ogievskiy: nbd/server: send more than one extent of base:allocation context
- John Snow: qapi: bitmap-merge: document name change
- Vladimir Sementsov-Ogievskiy: nbd/server: fix bitmap export
# gpg: Signature made Thu 27 Sep 2018 03:40:03 BST
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2018-09-26:
nbd/server: send more than one extent of base:allocation context
qapi: bitmap-merge: document name change
nbd/server: fix bitmap export
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This supercedes Juan's pull from the 13th
-----BEGIN PGP SIGNATURE-----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=JP00
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20180926a' into staging
Migration pull 2018-09-26
This supercedes Juan's pull from the 13th
# gpg: Signature made Wed 26 Sep 2018 18:07:30 BST
# gpg: using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20180926a:
migration/ram.c: Avoid taking address of fields in packed MultiFDInit_t struct
migration: fix the compression code
migration: fix QEMUFile leak
tests/migration: Speed up the test on ppc64
migration: cleanup in error paths in loadvm
migration/postcopy: Clear have_listen_thread
tests/migration: Add migration-test header file
tests/migration: Support cross compilation in generating boot header file
tests/migration: Convert x86 boot block compilation script into Makefile
migration: use save_page_use_compression in flush_compressed_data
migration: show the statistics of compression
migration: do not flush_compressed_data at the end of iteration
Add a hint message to loadvm and exits on failure
migration: handle the error condition properly
migration: fix calculating xbzrle_counters.cache_miss_rate
migration/rdma: Fix uninitialised rdma_return_path
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Monochrome cursors are still used by Windows guests with the
QXL-WDDM-DOD driver. Such cursor types have one odd feature, inversion
of colors. GDK does not seem to support it, so implement an alternative
solution: fill the inverted pixels and add an outline to make the cursor
more visible. Tested with the text cursor in Notepad and Windows 10.
cursor_set_mono is also used by the vmware GPU, so add a special check
to avoid breaking its 32bpp format (tested with Kubuntu 14.04.4). I was
unable to find a guest which supports the 1bpp format with a vmware GPU.
The old implementation was buggy and removed in v2.10.0-108-g79c5a10cdd
("qxl: drop mono cursor support"), this version improves upon that by
adding bounds validation, clarifying the semantics of the two masks and
adds a workaround for inverted colors support.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1611984
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Message-id: 20180903145447.17142-1-peter@lekensteyn.nl
[ kraxel: minor codestyle fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When processing monitor config from guest store head0 width and height
for single-head configurations. Use these when creating the
DisplaySurface in the local renderer.
This fixes a rendering issue with wayland. Wayland rounds up the
framebuffer width and height to a multiple of 64, so with odd
resolutions (800x600 for example) the framebuffer is larger than the
actual screen. The monitor config has the actual screen size though.
This fixes guest display for anything using the local renderer
(non-spice UI, screendump monitor command).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180919103057.9666-1-kraxel@redhat.com
This patch adds edid support to the qemu stdvga. It is turned off by
default and can be enabled with the new edid property. The patch also
adds xres and yres properties to specify the video mode you want the
guest use. Works only with edid enabled and updated guest driver.
The mmio bar of the stdvga has some unused address space at the start.
It was reserved just in case it'll be needed for virtio, but it turned
out to not be needed for that. So let's use that region to place the
EDID data block there.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-6-kraxel@redhat.com
Create a io region for an EDID data block.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180925075646.25114-4-kraxel@redhat.com
Helper function to figure the size of a edid blob, by checking how many
extensions are present. Both the base edid blob and the extensions are
128 bytes in size.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-3-kraxel@redhat.com
EDID is a metadata format to describe monitors. On physical hardware
the monitor has an eeprom with that data block which can be read over
i2c bus.
On a linux system you can usually find the EDID data block in
/sys/class/drm/$card/$connector/edid. xorg ships a edid-decode utility
which you can use to turn the blob into readable form.
I think it would be a good idea to use EDID for virtual displays too.
Needs changes in both qemu and guest kms drivers. This patch is the
first step, it adds an generator for EDID blobs to qemu. Comes with a
qemu-edid test tool included.
With EDID we can pass more information to the guest. Names and serial
numbers, so the guests display configuration has no boring "Unknown
Monitor". List of video modes. Display resolution, pretty important
in case we want add HiDPI support some day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180925075646.25114-2-kraxel@redhat.com
This is necessary for efficient block-status export, for clients which
support it. (qemu is not yet such a client, but could become one.)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180704112302.471456-3-vsementsov@virtuozzo.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
We named these using underscores instead of the preferred dash,
document this nearby so we cannot possibly forget to rectify this
when we remove the 'x-' prefixes when the feature becomes stable.
We do not implement the change ahead of time to avoid more work
for libvirt to do in order to figure out how to use the beta version
of the API needlessly.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20180919190934.16284-1-jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: typo fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
Taking the address of a field in a packed struct is a bad idea, because
it might not be actually aligned enough for that pointer type (and
thus cause a crash on dereference on some host architectures). Newer
versions of clang warn about this:
migration/ram.c:651:19: warning: taking address of packed member 'magic' of class or structure 'MultiFDInit_t' may result in an unaligned pointer value [-Waddress-of-packed-member]
migration/ram.c:652:19: warning: taking address of packed member 'version' of class or structure 'MultiFDInit_t' may result in an unaligned pointer value [-Waddress-of-packed-member]
migration/ram.c:737:19: warning: taking address of packed member 'magic' of class or structure 'MultiFDPacket_t' may result in an unaligned pointer value [-Waddress-of-packed-member]
migration/ram.c:745:19: warning: taking address of packed member 'version' of class or structure 'MultiFDPacket_t' may result in an unaligned pointer value [-Waddress-of-packed-member]
migration/ram.c:755:19: warning: taking address of packed member 'size' of class or structure 'MultiFDPacket_t' may result in an unaligned pointer value [-Waddress-of-packed-member]
Avoid the bug by not using the "modify in place" byteswapping
functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180925161924.7832-1-peter.maydell@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add judgement in compress_threads_save_cleanup() to check whether the
static CompressParam *comp_param has been allocated. If not, just
return; or else segmentation fault will occur when using the NULL
comp_param's parameters. One test case can reproduce this is: set
the compression on and migrate to a wrong nonexistent host IP address.
Our current code does not judge before handling comp_param[idx]'s quit
and cond that whether they have been initialized. If not initialized,
"qemu_mutex_lock_impl: Assertion `mutex->initialized' failed." will
occur. Fix this by squashing the terminate_compression_threads() into
compress_threads_save_cleanup() and employing the existing judgement
condition. One test case can reproduce this error is: set the
compression on and fail to fully setup the default eight compression
thread in compress_threads_save_setup().
Signed-off-by: Fei Li <fli@suse.com>
Message-Id: <20180925091440.18910-1-fli@suse.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Spotted by ASAN while running:
$ tests/migration-test -p /x86_64/migration/postcopy/recovery
=================================================================
==18034==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 33864 byte(s) in 1 object(s) allocated from:
#0 0x7f3da7f31e50 in calloc (/lib64/libasan.so.5+0xeee50)
#1 0x7f3da644441d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5241d)
#2 0x55af9db15440 in qemu_fopen_channel_input /home/elmarco/src/qemu/migration/qemu-file-channel.c:183
#3 0x55af9db15413 in channel_get_output_return_path /home/elmarco/src/qemu/migration/qemu-file-channel.c:159
#4 0x55af9db0d4ac in qemu_file_get_return_path /home/elmarco/src/qemu/migration/qemu-file.c:78
#5 0x55af9dad5e4f in open_return_path_on_source /home/elmarco/src/qemu/migration/migration.c:2295
#6 0x55af9dadb3bf in migrate_fd_connect /home/elmarco/src/qemu/migration/migration.c:3111
#7 0x55af9dae1bf3 in migration_channel_connect /home/elmarco/src/qemu/migration/channel.c:91
#8 0x55af9daddeca in socket_outgoing_migration /home/elmarco/src/qemu/migration/socket.c:108
#9 0x55af9e13d3db in qio_task_complete /home/elmarco/src/qemu/io/task.c:158
#10 0x55af9e13ca03 in qio_task_thread_result /home/elmarco/src/qemu/io/task.c:89
#11 0x7f3da643b1ca in g_idle_dispatch gmain.c:5535
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180925092245.29565-1-marcandre.lureau@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The SLOF boot process is always quite slow ... but we can speed it up
a little bit by specifying "-nodefaults" and by using the "nvramrc"
variable instead of "boot-command" (since "nvramrc" is evaluated earlier
in the SLOF boot process than "boot-command").
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1537204330-16076-1-git-send-email-thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There's a couple of error paths in qemu_loadvm_state
which happen early on but after we've initialised the
load state; that needs to be cleaned up otherwise
we can hit asserts if the state gets reinitialised later.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180914170430.54271-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Clear have_listen_thread when we exit the thread.
The fallout from this was that various things thought there was
an ongoing postcopy after the postcopy had finished.
The case that failed was postcopy->savevm->loadvm.
This corresponds to RH bug https://bugzilla.redhat.com/show_bug.cgi?id=1608765
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180914170430.54271-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The TCG backend uses LOWREGMASK to get the low 3 bits of register numbers.
This was defined as no-op for 32-bit x86, with the assumption that we have
eight registers anyway. This assumption is not true once we have xmm regs.
Since LOWREGMASK was a no-op, xmm register indidices were wrong in opcodes
and have overflown into other opcode fields, wreaking havoc.
To trigger these problems, you can try running the "movi d8, #0x0" AArch64
instruction on 32-bit x86. "vpxor %xmm0, %xmm0, %xmm0" should be generated,
but instead TCG generated "vpxor %xmm0, %xmm0, %xmm2".
Fixes: 770c2fc7bb ("Add vector operations")
Signed-off-by: Roman Kapl <rka@sysgo.com>
Message-Id: <20180824131734.18557-1-rka@sysgo.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Precomputing the hash values allows us to perform more frequent
accesses to the hash table, thereby reaching higher throughputs.
We keep the old behaviour by default, since (1) we might confuse
users if they measured a speedup without changing anything in
the QHT implementation, and (2) benchmarking the hash function
"on line" is also valuable.
Before:
$ taskset -c 0 tests/qht-bench -n 1
Throughput: 38.18 MT/s
After:
$ taskset -c 0 tests/qht-bench -n 1
Throughput: 38.16 MT/s
After (with precomputing):
$ taskset -c 0 tests/qht-bench -n 1 -p
Throughput: 50.87 MT/s
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These functions do not modify their @ht or @bucket arguments.
Constify those arguments.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
seqlock_read_begin takes a const param since c04649eeea
("seqlock: constify seqlock_read_begin", 2018-08-23), so
we can constify the entire lookup.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Accessing the HT from an iterator results almost always
in a deadlock. Given that only one qht-internal function
uses this argument, drop it from the interface.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
