Default to false.
Tidy variable naming and inline cast uses while at it.
Tested-by: Jia Liu <proljc@gmail.com> (or32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
To avoid complication in code that otherwise would not need to
care about whether EL1 is AArch32 or AArch64, we should store
the interrupt mask bits (CPSR.AIF in AArch32 and PSTATE.DAIF
in AArch64) in one place consistently regardless of EL1's mode.
Since AArch64 has an extra enable bit (D for debug exceptions)
which isn't visible in AArch32, this means we need to keep
the enables in env->pstate. (This is also consistent with the
general approach we're taking that we handle 32 bit CPUs as
being like AArch64/ARMv8 CPUs but which only run in 32 bit mode.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The previous placement could result in duplicate logging while
still processing interrupts.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Replace growing numbers of inline x86_env_get_cpu() with x86_cpu variable.
Reviewed-by: Chen Fan <chen.fan@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This motion is preparing for refactoring vCPU APIC subsequently.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Local variable CPUClass *cc needs to be reloaded after return from longjmp,
too. (This fixes a mips-softmmu crash observed on FreeBSD when QEMU is
built with clang.)
Reported-by: Dimitry Andric <dim@FreeBSD.org>
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Prepares for changing cpu_single_step() argument to CPUState.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Where no extra implementation is needed, fall back to CPUClass::set_pc().
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since commit 878096eeb2 (cpu: Turn
cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no
longer needed.
Add documentation and make the functions available through qemu/log.h
outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h
was not yet possible due to convoluted include paths, so that some
devices grow an implicit and unneeded dependency on qom/cpu.h for now.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: Richard Henderson <rth@twiddle.net>
[AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'mingw' of git://qemu.weilnetz.de/qemu:
qemu-timer: move timeBeginPeriod/timeEndPeriod to os-win32
Release SMP restriction on Windows
Ensure good ordering of memory instruction in cpu_exec
Check effective suspension of TCG thread
The IO thread, when it senses cpu_single_env == 0, expects exit_request
to be checked later on. A compiler scheduling constraint is not strong
enough to ensure this on modern architecture. A memory fence is needed
as well.
Signed-off-by: Olivier Hainque <hainque@adacore.com>
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The CONFIG_DEBUG_EXEC define compiles out a single qemu_log_mask()
call, which is a pretty trivial cost even for something in the main
cpu_exec() loop. Having this be conditionally defined means that
'-d exec' on a non-debug build will silently do nothing. Drop the
define and the configure machinery that sets it, in favour of just
always allowing this log option to be enabled at runtime. As a
concession to the mainloopiness, we use qemu_loglevel_mask()+qemu_log()
rather than qemu_log_mask() to avoid the function call overhead.
Note that DEBUG_DISAS is always defined, so removing the
'|| defined(CONFIG_DEBUG_EXEC)' from those conditionals makes
no behavioural change for that logging.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We can compute the value in cpu_dump_state anyway, and gratuitous
modifications to eflags creates heisenbugs.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This removes a global per-target function and thus takes us one step
closer to compiling multiple targets into one executable.
It will also allow to override the interrupt handling for certain CPU
families.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Fix some of the nasty TCG race conditions and crashes by implementing
cpu_exit() as setting a flag which is checked at the start of each TB.
This avoids crashes if a thread or signal handler calls cpu_exit()
while the execution thread is itself modifying the TB graph (which
may happen in system emulation mode as well as in linux-user mode
with a multithreaded guest binary).
This fixes the crashes seen in LP:668799; however there are another
class of crashes described in LP:1098729 which stem from the fact
that in linux-user with a multithreaded guest all threads will
use and modify the same global TCG date structures (including the
generated code buffer) without any kind of locking. This means that
multithreaded guest binaries are still in the "unsupported"
category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
If tcg_qemu_tb_exec() returns a value whose low bits don't indicate a
link to an indexed next TB, this means that the TB execution never
started (eg because the instruction counter hit zero). In this case the
guest PC has to be reset to the address of the start of the TB.
Refactor the cpu-exec code to make all tcg_qemu_tb_exec() calls pass
through a wrapper function which does this restoration if necessary.
Note that the apparent change in cpu_exec_nocache() from calling
cpu_pc_from_tb() with the old TB to calling it with the TB returned by
do_tcg_qemu_tb_exec() is safe, because in the nocache case we can
guarantee that the TB we try to execute is not linked to any others,
so the only possible returned TB is the one we started at. That is,
we should arguably previously have included in cpu_exec_nocache() an
assert(next_tb & ~TB_EXIT_MASK) == tb), since the API requires restore
from next_tb but we were using tb.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Document tcg_qemu_tb_exec(). In particular, its return value is a
combination of a pointer to the next translation block and some
extra information in the low two bits. Provide some #defines for
the values passed in these bits to improve code clarity.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The setjmp() function doesn't specify whether signal masks are saved and
restored; on Linux they are not, but on BSD (including MacOSX) they are.
We want to have consistent behaviour across platforms, so we should
always use "don't save/restore signal mask" (this is also generally
going to be faster). This also works around a bug in MacOSX where the
signal-restoration on longjmp() affects the signal mask for a completely
different thread, not just the mask for the thread which did the longjmp.
The most visible effect of this was that ctrl-C was ignored on MacOSX
because the CPU thread did a longjmp which resulted in its signal mask
being applied to every thread, so that all threads had SIGINT and SIGTERM
blocked.
The POSIX-sanctioned portable way to do a jump without affecting signal
masks is to siglongjmp() to a sigjmp_buf which was created by calling
sigsetjmp() with a zero savemask parameter, so change all uses of
setjmp()/longjmp() accordingly. [Technically POSIX allows sigsetjmp(buf, 0)
to save the signal mask; however the following siglongjmp() must not
restore the signal mask, so the pair can be effectively considered as
"sigjmp/longjmp which don't touch the mask".]
For Windows we provide a trivial sigsetjmp/siglongjmp in terms of
setjmp/longjmp -- this is OK because no user will ever pass a non-zero
savemask.
The setjmp() uses in tests/tcg/test-i386.c and tests/tcg/linux-test.c
are left untouched because these are self-contained singlethreaded
test programs intended to be run under QEMU's Linux emulation, so they
have neither the portability nor the multithreading issues to deal with.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Explictly NULL it on CPU reset since it was located before breakpoints.
Change vapic_report_tpr_access() argument to CPUState. This also
resolves the use of void* for cpu.h independence.
Change vAPIC patch_instruction() argument to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
It's worth to clean-up translation blocks variables and move them
into one context as was suggested by Swirl.
Also if we use this context directly inside tcg_ctx, then it
speeds up code generation a bit.
Signed-off-by: Evgeny Voevodin <evgenyvoevodin@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
For target-mips also change the return type to bool.
Make include paths for cpu-qom.h consistent for alpha and unicore32.
Signed-off-by: Andreas Färber <afaerber@suse.de>
[AF: Updated new target-openrisc function accordingly]
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
Move the DUMP_FPU and DUMP_CCOP flags for cpu_dump_state() from being
x86-specific flags to being generic ones. This allows us to drop some
TARGET_I386 ifdefs in various places, and means that we can (potentially)
be more consistent across architectures about which monitor commands or
debug abort printouts include FPU register contents and info about
QEMU's condition-code optimisations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch provides a way to optionally suppress spurious interrupts,
as a workaround for systems described below:
Some old operating systems do not handle spurious interrupts well,
and qemu tends to generate them significantly more often than
real hardware.
Examples:
- Microport UNIX System V/386 v 2.1 (ca 1987)
(The main problem I'm fixing: Without this patch, it panics
sporadically when accessing the hard disk.)
- AT&T UNIX System V/386 Release 4.0 Version 2.1a (ca 1991)
See screenshot in "QEMU Official OS Support List":
http://www.claunia.com/qemu/objectManager.php?sClass=application&iId=9
(I don't have this system to test.)
- A report about OS/2 boot lockup from 2004 by Hampa Hug:
http://lists.nongnu.org/archive/html/qemu-devel/2004-09/msg00367.html
(My patch was partially inspired by his.)
Also: http://lists.nongnu.org/archive/html/qemu-devel/2005-06/msg00243.html
(I don't have this system to test.)
Signed-off-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: malc <av1474@comtv.ru>
This patch initializes the cpuid to exactly correct value because
linux kernel will check it.
In addition, the exception types are specified in proper situations.
Then it could make exceptions generated correctly and timely.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'x86cpu_qom_tcg_v2' of git://github.com/imammedo/qemu:
target-i386: move tcg initialization into x86_cpu_initfn()
cleanup cpu_set_debug_excp_handler
target-xtensa: drop usage of prev_debug_excp_handler
target-i386: drop usage of prev_debug_excp_handler
