We assumes the iommu_ops were attached to the root region of address
space. This may not be true for all kinds of IOMMU implementation and
especially after commit 3716d5902d ("pci: introduce a bus master
container"). So fix this by not assuming as->root has iommu_ops,
instead depending on the regions reported by memory listener through:
- register a memory listener to dma_as
- during region_add, if it's a region of IOMMU, register a specific
IOMMU notifier, and store all notifiers in a list.
- during region_del, compare and delete the IOMMU notifier from the list
This is also a must for making vhost device IOTLB works for all types
of IOMMUs. Note, since we register one notifier during each
.region_add, the IOTLB may be flushed more than one times, this is
suboptimal and could be optimized in the future.
Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Fixes: 3716d5902d ("pci: introduce a bus master container")
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
If, once the kernel has booted, we try to remove a memory
hotplugged while the kernel was not started, QEMU crashes on
an assert:
qemu-system-ppc64: hw/virtio/vhost.c:651:
vhost_commit: Assertion `r >= 0' failed.
...
#4 in vhost_commit
#5 in memory_region_transaction_commit
#6 in pc_dimm_memory_unplug
#7 in spapr_memory_unplug
#8 spapr_machine_device_unplug
#9 in hotplug_handler_unplug
#10 in spapr_lmb_release
#11 in detach
#12 in set_allocation_state
#13 in rtas_set_indicator
...
If we take a closer look to the guest kernel log, we can see when
we try to unplug the memory:
pseries-hotplug-mem: Attempting to hot-add 4 LMB(s)
What happens:
1- The kernel has ignored the memory hotplug event because
it was not started when it was generated.
2- When we hot-unplug the memory,
QEMU starts to remove the memory,
generates an hot-unplug event,
and signals the kernel of the incoming new event
3- as the kernel is started, on the QEMU signal, it reads
the event list, decodes the hotplug event and tries to
finish the hotplugging.
4- QEMU receive the the hotplug notification while it
is trying to hot-unplug the memory. This moves the memory
DRC to an invalid state
This patch prevents this by not allowing to set the allocation
state to USABLE while the DRC is awaiting release.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1432382
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
long is 32-bits on 64-bit windows, which caused the top half of the
address to be truncated; this patch changes it to use the
QEMU_ALIGN_UP macro which does not suffer the same problem
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This reverts commit 07bfa35477.
The global variable is only read as part of a
apic_reset_irq_delivered();
qemu_irq_raise(s->irq);
if (!apic_get_irq_delivered()) {
sequence, so the value never matters at migration time.
Reported-by: Dr. David Alan Gilbert <dglibert@redhat.com>
Cc: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The multithreaded TCG implementation exposed deadlocks in the win32
condition variables: as implemented, qemu_cond_broadcast waited on
receivers, whereas the pthreads API it was intended to emulate does
not. This was causing a deadlock because broadcast was called while
holding the IO lock, as well as all possible waiters blocked on the
same lock.
This patch replaces all the custom synchronisation code for mutexes
and condition variables with native Windows primitives (SRWlocks and
condition variables) with the same semantics as their POSIX
equivalents. To enable that, it requires a Windows Vista or newer host
OS.
Signed-off-by: Andrey Shedel <ashedel@microsoft.com>
[AB: edited commit message]
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-Id: <20170324220141.10104-1-Andrew.Baumann@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio_input_send buffers input events until it sees a SYNC. Then it
either sends or drops the entire batch, depending on whether eventq
has enough space available. The case to avoid here is partial sends
where only part of the batch would get to the guest.
Using virtqueue_get_avail_bytes to check the state of eventq was not
correct. The queue may have a smaller number of larger buffers
available so bytes may be enough but the batch would still not be
possible to send, leading to the "Huh? No vq elem available" error.
Instead of checking available bytes, this patch optimistically pops
buffers from the queue and puts them back in case it runs out of
space and the batch needs to be dropped.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1490365490-4854-3-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
They will be used in virtio-scsi-dataplane.c as well, so move them to
header.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170317061447.16243-2-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just a single bugfix in this batch. It's not strictly in ppc code,
though it's for the pseries machine's benefit. Eduardo suggested it
go through my tree however.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=jFKm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170323' into staging
ppc patch queue for 2017-03-23
Just a single bugfix in this batch. It's not strictly in ppc code,
though it's for the pseries machine's benefit. Eduardo suggested it
go through my tree however.
# gpg: Signature made Thu 23 Mar 2017 10:09:17 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170323:
numa,spapr: align default numa node memory size to 256MB
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow block backends to forward drain requests to their devices/users.
The initial intended purpose for this patch is to allow BBs to forward
requests along to BlockJobs, which will want to pause if their associated
BB has entered a drained region.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20170316212351.13797-3-jsnow@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
A system with multiple VMGENID devices is undefined in the VMGENID spec by
omission.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ben Warren <ben@skyportsystems.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
The WRITE_POINTER linker/loader command that underlies VMGENID depends on
commit baf2d5bfba ("fw-cfg: support writeable blobs", 2017-01-12), which
in turn depends on fw_cfg DMA.
DMA for fw_cfg is enabled in 2.5+ machine types only (see commit
e6915b5f3a, "fw_cfg: unbreak migration compatibility for 2.4 and earlier
machines", 2016-02-18).
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ben Warren <ben@skyportsystems.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com <mailto:ben@skyportsystems.com>>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Since commit 224245b ("spapr: Add LMB DR connectors"), NUMA node
memory size must be aligned to 256MB (SPAPR_MEMORY_BLOCK_SIZE).
But when "-numa" option is provided without "mem" parameter,
the memory is equally divided between nodes, but 8MB aligned.
This can be not valid for pseries.
In that case we can have:
$ ./ppc64-softmmu/qemu-system-ppc64 -m 4G -numa node -numa node -numa node
qemu-system-ppc64: Node 0 memory size 0x55000000 is not aligned to 256 MiB
With this patch, we have:
(qemu) info numa
3 nodes
node 0 cpus: 0
node 0 size: 1280 MB
node 1 cpus:
node 1 size: 1280 MB
node 2 cpus:
node 2 size: 1536 MB
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qemu-ga's socket activation support was not obeying the LISTEN_PID
environment variable, which avoids that a process uses a socket-activation
file descriptor meant for its parent.
Mess can for example ensue if a process forks a children before consuming
the socket-activation file descriptor and therefore setting O_CLOEXEC
on it.
Luckily, qemu-nbd also got socket activation code, and its copy does
support LISTEN_PID. Some extra fixups are needed to ensure that the
code can be used for both, but that's what this patch does. The
main change is to replace get_listen_fds's "consume" argument with
the FIRST_SOCKET_ACTIVATION_FD macro from the qemu-nbd code.
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
bdrv_child_set_perm alone is not very usable because the caller must
call bdrv_child_check_perm first. This is already encapsulated
conveniently in bdrv_child_try_set_perm, so remove the other prototypes
from the header and fix the one wrong caller, block/mirror.c.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
More fixes missed in the previous pull request.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYyfidAAoJECgfDbjSjVRp1yYIAKC52EwDVcJxL2CEGncCQTVT
i9x04TYmzLOO+dERsO7Z+jphoB1cxpVxZVrvG5wfZo07gcGheNk524ABM2c9tNqa
7OZFcdBmN/l5C9ynL6aCdgu/bns5sEMUXf3By3l8iWKupc1C8URWGrfMVypFDumZ
AOSD/4bbvXxZlZjOENq5LsRHYU68KBK07C1fDRJA7b7ChXHS6qefeq6fbOvI9zJ7
24MltJMsNS36l//namD2HFPnO1eD3HXc57yBn5QBTTn5FERIghxYSsluAY7irKMp
UurF1D0pUL1sU2fjaLwFRBJL15tz6syjYOkna9cGmOT8m1D7CYnKjCRErxtqAmE=
=4pMp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci: fixes
More fixes missed in the previous pull request.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 16 Mar 2017 02:29:49 GMT
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio-serial-bus: Delete timer from list before free it
hw/virtio: fix Power Management Control Register for PCI Express virtio devices
hw/virtio: fix Link Control Register for PCI Express virtio devices
hw/virtio: fix error enabling flags in Device Control register
hw/pcie: fix Extended Configuration Space for devices with no Extended Capabilities
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a helper to say whether a RAMBlock was created as a
shared mapping.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Quoting cirrus source code:
Follow real hardware, cirrus card emulated has 4 MB video memory.
Also accept 8 MB/16 MB for backward compatibility.
So just use 4MB by default. We decided to leave that at 8MB by default
a while ago, for live migration compatibility reasons. But we have
compat properties to handle that, so that isn't a compeling reason.
This also removes some sanity check inconsistencies in the cirrus code.
Some places check against the allocated video memory, some places check
against the 4MB physical hardware has. Guest code can trigger asserts
because of that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489494514-15606-1-git-send-email-kraxel@redhat.com
There is a special code path (dpy_gfx_copy) to allow graphic emulation
notify user interface code about bitblit operations carryed out by
guests. It is supported by cirrus and vnc server. The intended purpose
is to optimize display scrolls and just send over the scroll op instead
of a full display update.
This is rarely used these days though because modern guests simply don't
use the cirrus blitter any more. Any linux guest using the cirrus drm
driver doesn't. Any windows guest newer than winxp doesn't ship with a
cirrus driver any more and thus uses the cirrus as simple framebuffer.
So this code tends to bitrot and bugs can go unnoticed for a long time.
See for example commit "3e10c3e vnc: fix qemu crash because of SIGSEGV"
which fixes a bug lingering in the code for almost a year, added by
commit "c7628bf vnc: only alloc server surface with clients connected".
Also the vnc server will throttle the frame rate in case it figures the
network can't keep up (send buffers are full). This doesn't work with
dpy_gfx_copy, for any copy operation sent to the vnc client we have to
send all outstanding updates beforehand, otherwise the vnc client might
run the client side blit on outdated data and thereby corrupt the
display. So this dpy_gfx_copy "optimization" might even make things
worse on slow network links.
Lets kill it once for all.
Oh, and one more reason: Turns out (after writing the patch) we have a
security bug in that code path ...
Fixes: CVE-2016-9603
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1489494419-14340-1-git-send-email-kraxel@redhat.com
In function cpu_physical_memory_sync_dirty_bitmap, file
include/exec/ram_addr.h:
if (src[idx][offset]) {
unsigned long bits = atomic_xchg(&src[idx][offset], 0);
unsigned long new_dirty;
new_dirty = ~dest[k];
dest[k] |= bits;
new_dirty &= bits;
num_dirty += ctpopl(new_dirty);
}
After these codes executed, only the pages not dirtied in bitmap(dest),
but dirtied in dirty_memory[DIRTY_MEMORY_MIGRATION] will be calculated.
For example:
When ram_list.dirty_memory[DIRTY_MEMORY_MIGRATION] = 0b00001111,
and atomic_rcu_read(&migration_bitmap_rcu)->bmap = 0b00000011,
the new_dirty will be 0b00001100, and this function will return 2 but not
4 which is expected.
the dirty pages in dirty_memory[DIRTY_MEMORY_MIGRATION] are all new,
so these should be calculated also.
Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
As the pci ahci can be hotplug and unplug, in the ahci unrealize
function it should free all the resource once allocated in the
realized function. This patch add ide_exit to free the resource.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 1488449293-80280-3-git-send-email-liqiang6-s@360.cn
Signed-off-by: John Snow <jsnow@redhat.com>
Make Power Management State flag writable to conform
with the PCI Express spec.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make several Link Control Register flags writable to conform
with the PCI Express spec.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the virtio devices are PCI Express, make error-enabling flags
writable to respect the PCIe spec.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Absence of any Extended Capabilities is required to be
indicated by an Extended Capability header with a Capability ID of
0000h, a Capability Version of 0h, and a Next Capability Offset of 000h.
Instead of inserting a 'NULL' capability is simpler to mark the start
of the Extended Configuration Space as read-only to achieve the same
behaviour.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
96a8821d21 ("virtio: unbreak virtio-pci with IOMMU after caching ring
translations") tries to make IOMMU works with virtio memory region
cache, but it requires IOMMU to be created before any virtio
devices. This is sub optimal, fixing this by introduce a bus master
container to make sure address space can be initialized during device
registering, and then we can safely set alias and make
bus_master_enable_region as its subregion during bus master
initialization.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
icount has become much slower after tcg_cpu_exec has stopped
using the BQL. There is also a latent bug that is masked by
the slowness.
The slowness happens because every occurrence of a QEMU_CLOCK_VIRTUAL
timer now has to wake up the I/O thread and wait for it. The rendez-vous
is mediated by the BQL QemuMutex:
- handle_icount_deadline wakes up the I/O thread with BQL taken
- the I/O thread wakes up and waits on the BQL
- the VCPU thread releases the BQL a little later
- the I/O thread raises an interrupt, which calls qemu_cpu_kick
- the VCPU thread notices the interrupt, takes the BQL to
process it and waits on it
All this back and forth is extremely expensive, causing a 6 to 8-fold
slowdown when icount is turned on.
One may think that the issue is that the VCPU thread is too dependent
on the BQL, but then the latent bug comes in. I first tried removing
the BQL completely from the x86 cpu_exec, only to see everything break.
The only way to fix it (and make everything slow again) was to add a dummy
BQL lock/unlock pair.
This is because in -icount mode you really have to process the events
before the CPU restarts executing the next instruction. Therefore, this
series moves the processing of QEMU_CLOCK_VIRTUAL timers straight in
the vCPU thread when running in icount mode.
The required changes include:
- make the timer notification callback wake up TCG's single vCPU thread
when run from another thread. By using async_run_on_cpu, the callback
can override all_cpu_threads_idle() when the CPU is halted.
- move handle_icount_deadline after qemu_tcg_wait_io_event, so that
the timer notification callback is invoked after the dummy work item
wakes up the vCPU thread
- make handle_icount_deadline run the timers instead of just waking the
I/O thread.
- stop processing the timers in the main loop
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no change for now, because the callback just invokes
qemu_notify_event.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This dependency is the wrong way, and we will need util/qemu-timer.h from
sysemu/cpus.h in the next patch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using "-mem-prealloc" option for a large guest leads to higher guest
start-up and migration time. This is because with "-mem-prealloc" option
qemu tries to map every guest page (create address translations), and
make sure the pages are available during runtime. virsh/libvirt by
default, seems to use "-mem-prealloc" option in case the guest is
configured to use huge pages. The patch tries to map all guest pages
simultaneously by spawning multiple threads. Currently limiting the
change to QEMU library functions on POSIX compliant host only, as we are
not sure if the problem exists on win32. Below are some stats with
"-mem-prealloc" option for guest configured to use huge pages.
------------------------------------------------------------------------
Idle Guest | Start-up time | Migration time
------------------------------------------------------------------------
Guest stats with 2M HugePage usage - single threaded (existing code)
------------------------------------------------------------------------
64 Core - 4TB | 54m11.796s | 75m43.843s
64 Core - 1TB | 8m56.576s | 14m29.049s
64 Core - 256GB | 2m11.245s | 3m26.598s
------------------------------------------------------------------------
Guest stats with 2M HugePage usage - map guest pages using 8 threads
------------------------------------------------------------------------
64 Core - 4TB | 5m1.027s | 34m10.565s
64 Core - 1TB | 1m10.366s | 8m28.188s
64 Core - 256GB | 0m19.040s | 2m10.148s
-----------------------------------------------------------------------
Guest stats with 2M HugePage usage - map guest pages using 16 threads
-----------------------------------------------------------------------
64 Core - 4TB | 1m58.970s | 31m43.400s
64 Core - 1TB | 0m39.885s | 7m55.289s
64 Core - 256GB | 0m11.960s | 2m0.135s
-----------------------------------------------------------------------
Changed in v2:
- modify number of memset threads spawned to min(smp_cpus, 16).
- removed 64GB memory restriction for spawning memset threads.
Changed in v3:
- limit number of threads spawned based on
min(sysconf(_SC_NPROCESSORS_ONLN), 16, smp_cpus)
- implement memset thread specific siglongjmp in SIGBUS signal_handler.
Changed in v4
- remove sigsetjmp/siglongjmp and SIGBUS unblock/block for main thread
as main thread no longer touches any pages.
- simplify code my returning memset_thread_failed status from
touch_all_pages.
Signed-off-by: Jitendra Kolhe <jitendra.kolhe@hpe.com>
Message-Id: <1487907103-32350-1-git-send-email-jitendra.kolhe@hpe.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'name' parameter to memory_region_init_* had been marked as debug
only, however vmstate_region_ram uses it as a parameter to
qemu_ram_set_idstr to set RAMBlock names and these form part of the
migration stream.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170309152708.30635-1-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This set has a handful og bugfixes to go into qemu-2.9. This includes
an update to the dtc/libfdt submodule which will fix the build errors
seen on some distributions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=dxrH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170314' into staging
ppc patch queue for 2017-03-14
This set has a handful og bugfixes to go into qemu-2.9. This includes
an update to the dtc/libfdt submodule which will fix the build errors
seen on some distributions.
# gpg: Signature made Tue 14 Mar 2017 04:00:41 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170314:
dtc: Update submodule to avoid build errors
pseries: Don't expose PCIe extended config space on older machine types
target/ppc: fix cpu_ov setting for 32-bit
target/ppc: Fix wrong number of UAMR register
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The definition of the major() and minor() macros are moving within glibc to
<sys/sysmacros.h>. Include this header when it is available to avoid the
following sorts of build-stopping messages:
qga/commands-posix.c: In function ‘dev_major_minor’:
qga/commands-posix.c:656:13: error: In the GNU C Library, "major" is defined
by <sys/sysmacros.h>. For historical compatibility, it is
currently defined by <sys/types.h> as well, but we plan to
remove this soon. To use "major", include <sys/sysmacros.h>
directly. If you did not intend to use a system-defined macro
"major", you should undefine it after including <sys/types.h>. [-Werror]
*devmajor = major(st.st_rdev);
^~~~~~~~~~~~~~~~~~~~~~~~~~
qga/commands-posix.c:657:13: error: In the GNU C Library, "minor" is defined
by <sys/sysmacros.h>. For historical compatibility, it is
currently defined by <sys/types.h> as well, but we plan to
remove this soon. To use "minor", include <sys/sysmacros.h>
directly. If you did not intend to use a system-defined macro
"minor", you should undefine it after including <sys/types.h>. [-Werror]
*devminor = minor(st.st_rdev);
^~~~~~~~~~~~~~~~~~~~~~~~~~
The additional include allows the build to complete on Fedora 26 (Rawhide)
with glibc version 2.24.90.
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
bb9986452 "spapr_pci: Advertise access to PCIe extended config space"
allowed guests to access the extended config space of PCI Express devices
via the PAPR interfaces, even though the paravirtualized bus mostly acts
like plain PCI.
However, that patch enabled access unconditionally, including for existing
machine types, which is an unwise change in behaviour. This patch limits
the change to pseries-2.9 (and later) machine types.
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
glibc blacklists TSX on Haswell CPUs with model==60 and
stepping < 4. To make the Haswell CPU model more useful, make
those guests actually use TSX by changing CPU stepping to 4.
References:
* glibc commit 2702856bf45c82cf8e69f2064f5aa15c0ceb6359
https://sourceware.org/git/?p=glibc.git;a=commit;h=2702856bf45c82cf8e69f2064f5aa15c0ceb6359
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170309181212.18864-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488317230-26248-19-git-send-email-armbru@redhat.com>
The next few commits will put the errors to use where appropriate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488317230-26248-13-git-send-email-armbru@redhat.com>
The next few commits will put the errors to use where appropriate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-9-git-send-email-armbru@redhat.com>
Currently the QObjectInputVisitor assumes that all scalar values are
directly represented as the final types declared by the thing being
visited. i.e. it assumes an 'int' is using QInt, and a 'bool' is using
QBool, etc. This is good when QObjectInputVisitor is fed a QObject
that came from a JSON document on the QMP monitor, as it will strictly
validate correctness.
To allow QObjectInputVisitor to be reused for visiting a QObject
originating from keyval_parse(), an alternative mode is needed where
all the scalars types are represented as QString and converted on the
fly to the final desired type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1475246744-29302-8-git-send-email-berrange@redhat.com>
Rebased, conflicts resolved, commit message updated to refer to
keyval_parse(). autocast replaced by keyval in identifiers,
noautocast replaced by fail in tests.
Fix qobject_input_type_uint64_keyval() not to reject '-', for QemuOpts
compatibility: replace parse_uint_full() by open-coded
parse_option_number(). The next commit will add suitable tests.
Leave out the fancy ERANGE error reporting for now, but add a TODO
comment. Add it qobject_input_type_int64_keyval() and
qobject_input_type_number_keyval(), too.
Open code parse_option_bool() and parse_option_size() so we have to
call qobject_input_get_name() only when actually needed. Again, leave
out ERANGE error reporting for now.
QAPI/QMP downstream extension prefixes __RFQDN_ don't work, because
keyval_parse() splits them at '.'. This will be addressed later in
the series.
qobject_input_type_int64_keyval(), qobject_input_type_uint64_keyval(),
qobject_input_type_number_keyval() tweaked for style.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-5-git-send-email-armbru@redhat.com>
keyval_parse() parses KEY=VALUE,... into a QDict. Works like
qemu_opts_parse(), except:
* Returns a QDict instead of a QemuOpts (d'oh).
* Supports nesting, unlike QemuOpts: a KEY is split into key
fragments at '.' (dotted key convention; the block layer does
something similar on top of QemuOpts). The key fragments are QDict
keys, and the last one's value is updated to VALUE.
* Each key fragment may be up to 127 bytes long. qemu_opts_parse()
limits the entire key to 127 bytes.
* Overlong key fragments are rejected. qemu_opts_parse() silently
truncates them.
* Empty key fragments are rejected. qemu_opts_parse() happily
accepts empty keys.
* It does not store the returned value. qemu_opts_parse() stores it
in the QemuOptsList.
* It does not treat parameter "id" specially. qemu_opts_parse()
ignores all but the first "id", and fails when its value isn't
id_wellformed(), or duplicate (a QemuOpts with the same ID is
already stored). It also screws up when a value contains ",id=".
* Implied value is not supported. qemu_opts_parse() desugars "foo" to
"foo=on", and "nofoo" to "foo=off".
* An implied key's value can't be empty, and can't contain ','.
I intend to grow this into a saner replacement for QemuOpts. It'll
take time, though.
Note: keyval_parse() provides no way to do lists, and its key syntax
is incompatible with the __RFQDN_ prefix convention for downstream
extensions, because it blindly splits at '.', even in __RFQDN_. Both
issues will be addressed later in the series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1488317230-26248-4-git-send-email-armbru@redhat.com>
When adding an Error parameter, bdrv_replace_in_backing_chain() would
become nothing more than a wrapper around change_parent_backing_link().
So make the latter public, renamed as bdrv_replace_node(), and remove
bdrv_replace_in_backing_chain().
Most of the callers just remove a node from the graph that they just
inserted, so they can use &error_abort, but completion of a mirror job
with 'replaces' set can actually fail.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
change_parent_backing_link() will need to update multiple BdrvChild
objects at once. Checking permissions reference by reference doesn't
work because permissions need to be consistent only with all parents
moved to the new child.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJYvOJVAAoJEO8Ells5jWIRQwEH/32qzm0gLSZnxmrmvn3iizA1
t5lYfy0mpf2kdP4U58OqcgBYoGZmL0i316ZyIn2i9k9i2NXX/1LHp3to31p/msg3
0dFwdajfSkMCZROrbU9XJZRoCSD4+DeDKa/NBA+jbQSZgscRoBjM4bjYB/U72Swp
edRp/ZwD5BTO5Hpm3NDqBxmLNGqFxaeNamgx7eCrZ7OBAHFqmkNhdYH7WVKA31tU
KH1KaB24POKAr6hItR4Qcs2ZDA1zPBPblKVpmZ9AisQChg/lFphMQjqyJunRRuOk
OKV7fMWvfVrhqVR+IR9+J8EDS9lMI/2VA3hhs/umcmsao7uqixX57G8NmDLR6Tw=
=0Lht
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 06 Mar 2017 04:15:17 GMT
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net/filter-mirror: Follow CODING_STYLE
COLO-compare: Fix icmp and udp compare different packet always dump bug
COLO-compare: Optimize compare_common and compare_tcp
COLO-compare: Rename compare function and remove duplicate codes
filter-rewriter: skip net_checksum_calculate() while offset = 0
net/colo: fix memory double free error
vmxnet3: VMStatify rx/tx q_descr and int_state
vmxnet3: Convert ring values to uint32_t's
net/colo-compare: Fix memory free error
colo-compare: Fix removing fds been watched incorrectly in finalization
char: remove the right fd been watched in qemu_chr_fe_set_handlers()
colo-compare: kick compare thread to exit after some cleanup in finalization
colo-compare: use g_timeout_source_new() to process the stale packets
NetRxPkt: Remove code duplication in net_rx_pkt_pull_data()
NetRxPkt: Account buffer with ETH header in IOV length
NetRxPkt: Do not try to pull more data than present
NetRxPkt: Fix memory corruption on VLAN header stripping
eth: Extend vlan stripping functions
net: Remove useless local var pkt
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make VLAN stripping functions return number of bytes
copied to given Ethernet header buffer.
This information should be used to re-compose
packet IOV after VLAN stripping.
Cc: qemu-stable@nongnu.org
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
