See ISA, 4.3.7 for the details.
- add ACC and MR special registers;
- implement MAC16 and all inner MAC* opcode groups.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
QEMU timer is used to post CCOMPARE interrupt when the core is halted.
If that CCOMPARE interrupt is masked off then the timer must be rearmed
in the callback, otherwise it will be rearmed next time the core goes to
halt by the waiti instruction.
Add test case into timer testsuite.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- TLB opcode group;
- region protection option (ISA, 4.6.3);
- region translation option (ISA, 4.6.4);
- MMU option (ISA, 4.6.5).
Cache control attribute bits are not used by this implementation.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Specific xtensa processor overlay for GDB contains register map in
the gdb/xtensa-config.c. This description is used by the GDB to e.g.
parse 'g' response packets and it may be reused in the qemu's gdbstub
(only XTREG definitions for non-pseudoregisters are needed).
Currently mainline GDB does not support operations with privileged SRs
(see http://sourceware.org/ml/gdb/2011-07/msg00075.html). This support
may be enabled, see NUM_CORE_REGS comment in the gdbstub.c
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
See ISA, 4.4.3 for details.
Vector addresses recorded in core configuration are absolute values that
correspond to default VECBASE value.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
See ISA, 4.7.1.3 for details.
Window check is inserted before commands that push "used register
watermark" beyond its current level. Used register watermark is reset on
instructions that change WINDOW_BASE/WINDOW_START SRs.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
See ISA, 4.4.6 (interrupt option), 4.4.7 (high priority interrupt
option) and 4.4.8 (timer interrupt option) for details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Tensilica iss provides support for applications running in freestanding
environment through SIMCALL command. It is used by Tensilica libc to
access argc/argv, for file I/O, etc.
Note that simcalls that accept buffer addresses expect virtual addresses.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
See ISA, 4.4.4 for details.
Correct (aligned as per ISA) address for unaligned access is generated
in case this option is not enabled.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
See ISA, 4.3.3 for details.
TB flag XTENSA_TBFLAG_LITBASE is used to track enable bit of LITBASE SR.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
See ISA, 4.3.2 for details.
Operations that change LEND SR value invalidate TBs at the old and at
the new LEND. LEND value at TB compilation time is considered constant
and loop instruction is generated based on this value.
Invalidation may be avoided for the TB at the old LEND address, since
looping code verifies actual LEND value.
Invalidation may be avoided for the TB at the new LEND address if
there's a way to associate LEND address with TB at compilation time and
later verify that it doesn't change.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
See ISA, 4.7.1 for details.
Physical registers and currently visible window are separate fields in
CPUEnv. Only current window is accessible to TCG. On operations that
change window base helpers copy current window to and from physical
registers.
Window overflow check described in 4.7.1.3 is in separate patch.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- mark privileged opcodes with ring check;
- make debug exception on exception handler entry.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All operations in this group are no-ops, because cache ought to be
transparent to applications. However cache may be abused, then we'll
need to actually implement these opcodes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All operations in this group are no-ops, because there are no delayed
side effects.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reserved opcodes must generate illegal instruction exception. Usually
they signal emulation quality problems.
Not implemented opcodes are good to see.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Special Registers hold the majority of the state added to the processor
by the options. See ISA, 5.3 for details.
User Registers hold state added in support of designer's TIE and in some
cases of options that Tensilica provides. See ISA, 5.4 for details.
Only registers mapped in sregnames or uregnames are considered valid.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- BZ (comparison to zero);
- BI0 (comparison to signed immediate);
- BI1 (comparison to unsigned immediate);
- B (two registers comparison, bit sets comparison);
- BEQZ.N/BNEZ.N (narrow comparison to zero).
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Instructions with op0 >= 8 are 2 bytes long, others are 3 bytes long.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Set up disas_xtensa_insn switch structure, mark required options on high
level groups. Implement arithmetic/bit logic/jump/call0.
Implement code generation loop with single step/breakpoint checking.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
