This patch adds support for cut+paste to the qemu vnc server, which
allows the vnc client exchange clipbaord data with qemu and other peers
like the qemu vdagent implementation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20210519053940.1888907-1-kraxel@redhat.com
Message-Id: <20210519053940.1888907-8-kraxel@redhat.com>
This patch add vnc_display_reload_certs() to support
update x509 certificates.
Signed-off-by: Zihao Chang <changzihao1@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210316075845.1476-3-changzihao1@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC ACL concept has been replaced by the pluggable "authz" framework
which does not use monitor commands.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A long time ago the VNC server code had some memory corruption
fixes done in:
commit bea60dd767
Author: Peter Lieven <pl@kamp.de>
Date: Mon Jun 30 10:57:51 2014 +0200
ui/vnc: fix potential memory corruption issues
One of the implications of the fix was that the VNC server would have a
thin black bad down the right hand side if the guest desktop width was
not a multiple of 16. In practice this was a non-issue since the VNC
server was always honouring a guest specified resolution and guests
essentially always pick from a small set of sane resolutions likely in
real world hardware.
We recently introduced support for the extended desktop resize extension
and as a result the VNC client has ability to specify an arbitrary
desktop size and the guest OS may well honour it exactly. As a result we
no longer have any guarantee that the width will be a multiple of 16,
and so when resizing the desktop we have a 93% chance of getting the
black bar on the right hand size.
The VNC server maintains three different desktop dimensions
1. The guest surface
2. The server surface
3. The client desktop
The requirement for the width to be a multiple of 16 only applies to
item 2, the server surface, for the purpose of doing dirty bitmap
tracking.
Normally we will set the client desktop size to always match the server
surface size, but that's not a strict requirement. In order to cope with
clients that don't support the desktop size encoding, we already allow
for the client desktop to be a different size that the server surface.
Thus we can trivially eliminate the black bar, but setting the client
desktop size to be the un-rounded server surface size - the so called
"true width".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210311182957.486939-5-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The WMVi message is supposed to provide the same width/height
information as the regular desktop resize and extended desktop
resize messages. There can be times where the client width and
height are different from the pixman surface dimensions.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210311182957.486939-4-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This adds trace points for desktop size and audio related messages.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210311182957.486939-2-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently when using VNC the "password" flag turns on password based
authentication. The actual password has to be provided separately via
the monitor.
This introduces a "password-secret" option which lets the password be
provided up front.
$QEMU --object secret,id=vncsec0,file=passwd.txt \
--vnc localhost:0,password-secret=vncsec0
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210311114343.439820-2-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ui/console used to accept NULL as graphic console surface, but its
semantics was inconsistent among displays:
- cocoa and gtk-egl perform NULL dereference.
- egl-headless, spice and spice-egl do nothing.
- gtk releases underlying resources.
- sdl2-2d and sdl2-gl destroys the window.
- vnc shows a message, "Display output is not active."
Fortunately, only virtio-gpu and virtio-gpu-3d assign NULL so
we can study them to figure out the desired behavior. They assign
NULL *except* for the primary display when the device is realized,
reset, or its scanout is disabled. This effectively destroys
windows for the (uninitialized) secondary displays.
To implement the consistent behavior of display device
realization/reset, this change embeds it to the operation
switching the surface. When NULL was given as a new surface when
switching, ui/console will instead passes a placeholder down
to each display listeners.
sdl destroys the window for a secondary console if its surface is a
placeholder. The other displays simply shows the placeholder.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210225101316.83940-2-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The surfaces created with former qemu_create_message_surface
did not display the content from the guest and always contained
simple messages describing the reason.
A display backend may want to hide the window showing such a
surface. This change renames the function to
qemu_create_placeholder_surface, and adds "placeholder" flag; the
display can check the flag to decide to do anything special like
hiding the window.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210225101316.83940-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Unlike other pseudo-encodings these don't break gtk-vnc
because older versions don't suport the extended desktop
resize extension in the first place.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210125104041.495274-3-kraxel@redhat.com>
This reverts commit 9e1632ad07.
Older gtk-vnc versions can't deal with non-incremental update
requests sending pseudo-encodings, so trying to send full server
state (including desktop size, cursor etc. which is done using
pseudo-encodings) doesn't fly. Return to old behavior to send
those only for new connects and when changes happen.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210125104041.495274-2-kraxel@redhat.com>
Use qemu_opts_parse_noisily now that HMP does not call
vnc_parse anymore.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210120144235.345983-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The extended desktop resize encoding adds support for (a) clients
sending resize requests to the server, and (b) multihead support.
This patch implements (a). All resize requests are rejected by qemu.
Qemu can't resize the framebuffer on its own, this is in the hands of
the guest, so all qemu can do is forward the request to the guest.
Should the guest actually resize the framebuffer we can notify the vnc
client later with a separate message.
This requires support in the display device. Works with virtio-gpu.
https://github.com/rfbproto/rfbproto/blob/master/rfbproto.rst#extendeddesktopsize-pseudo-encoding
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210112134120.2031837-4-kraxel@redhat.com
qemu sends various state info like current cursor shape to newly connected
clients in response to a set_encoding message. This is not correct according
to the rfb spec. Send that information in response to a full (incremental=0)
framebuffer update request instead. Also send the resize information
unconditionally, not only in case of an actual server-side change.
This makes the qemu vnc server conform to the spec and allows clients to
request the complete vnc server state without reconnect.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210112134120.2031837-3-kraxel@redhat.com
Move the check whenever a cursor exists into the vnc_cursor_define()
function so callers don't have to do it.
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210112134120.2031837-2-kraxel@redhat.com
The "XVP" (Xen VNC Proxy) extension defines a mechanism for a VNC client
to issue power control requests to trigger graceful shutdown, reboot, or
hard reset.
This option is not enabled by default, since we cannot assume that users
with VNC access implicitly have administrator access to the guest OS.
Thus is it enabled with a boolean "power-control" option e.g.
-vnc :1,power-control=on
While, QEMU can easily support shutdown and reset, there's no easy way
to wire up reboot support at this time. In theory it could be done by
issuing a shutdown, followed by a reset, but there's no convenient
wiring for such a pairing in QEMU. It also isn't possible to have the
VNC server directly talk to QEMU guest agent, since the agent chardev is
typically owned by an external mgmt app.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[ kraxel: rebase to master ]
[ kraxel: add missing break ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In vnc_display_open(), if tls-creds is enabled, do object_ref(object
ref 1->2) for tls-creds. While in vnc_display_close(), object_unparent
sets object ref to 1(2->1) and unparent the object for root.
Problem:
1. the object can not be found from the objects_root, while the object
is not finalized.
2. the qemu_opts of tls-creds(id: creds0) is not deleted, so new tls
object with the same id(creds0) can not be delete & add.
Signed-off-by: Zihao Chang <changzihao1@huawei.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210111131911.805-1-changzihao1@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
vnc_write() should be locked after the RFB protocol is initialized.
Fixes: 0c426e4534 ("vnc: Add support for color map")
Cc: qemu-stable@nongnu.org
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Message-id: 20201116141338.148911-1-liangpeng10@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is a new vnc extension for cursors with an alpha channel. Use
it if supported by the vnc client, prefer it over the "rich cursor"
extension which supports only a bitmask for transparency.
This is a visible improvement especially on modern desktops which
actually use the alpha channel when defining cursors.
https://github.com/rfbproto/rfbproto/blob/master/rfbproto.rst#cursor-with-alpha-pseudo-encoding
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20201208115737.18581-7-kraxel@redhat.com
vnc stopped using the copyrect pseudo encoding in 2017, in commit
50628d3479 ("cirrus/vnc: zap bitblit support from console code.")
So we can drop the now unused copyrect feature bit.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20201208115737.18581-5-kraxel@redhat.com
When we connect to vnc by websocket channel, and disconnect
(maybe by some network exception) before handshake,
qemu will left CLOSE_WAIT socket and never close it
After 04d2529da2 ("ui: convert VNC server to use QIOChannelSocket")
and dd154c4d9f ("io: fix handling of EOF / error conditions in websock GSource"),
the vnc call qio_channel_add_watch only care about G_IO_IN,
but mising G_IO_HUP and G_IO_ERR.
When the websocket channel get EOF or error, it cannot callback,
because the caller ignore the event, that leads to resource leak
We need handle G_IO_HUP and G_IO_ERR event, then cleanup the channel
Fixes: 04d2529da2 ("ui: convert VNC server to use QIOChannelSocket")
Fixes: dd154c4d9f ("io: fix handling of EOF / error conditions in websock GSource")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Message-id: 20201029032241.11040-1-dinghui@sangfor.com.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pass &error_abort instead of NULL where the returned value is
dereferenced or asserted to be non-null. Drop a now redundant
assertion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-24-armbru@redhat.com>
vnc_display_print_local_addr() leaks the Error object when
qio_channel_socket_get_local_address() fails. Seems unlikely. Called
when we create a VNC display with vnc_display_open(). Plug the leak
by passing NULL to ignore the error.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-12-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Receiving the error in a local variable only to free it is less clear
(and also less efficient) than passing NULL. Clean up.
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Jerome Forissier <jerome@forissier.org>
CC: Greg Kurz <groug@kaod.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200630090351.1247703-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The buffer is the captured input to pass to backends.
As we should not modify it, mark the argument const.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200505132603.8575-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In my investigation, ZRLE always compresses better than ZLIB so
prioritize ZRLE over ZLIB, even if the client hints that ZLIB is
preferred.
zlib buffer is always reset in zrle_compress_data(), so using offset to
calculate next_out and avail_out is useless.
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Message-Id: <b5d129895d08a90d0a2a6183b95875bacfa998b8.1579582674.git.dirty@apple.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit de3f7de7f4.
Remove VNC optimization to reencode framebuffer update as raw if it's
smaller than the default encoding.
QEMU's implementation was naive and didn't account for the ZLIB z_stream
mutating with each compression. Because of the mutation, simply
resetting the output buffer's offset wasn't sufficient to "rewind" the
operation. The mutated z_stream would generate future zlib blocks which
referred to symbols in past blocks which weren't sent. This would lead
to artifacting.
Considering that ZRLE is never larger than raw and even though ZLIB can
occasionally be fractionally larger than raw, the overhead of
implementing this optimization correctly isn't worth it.
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We don't need Error **, as all callers pass local Error object, which
isn't used after the call, or NULL. Use Error * instead.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191205174635.18758-6-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Currently when qemu receives a vnc connect, it creates a 'VncState' to
represent this connection. In 'vnc_worker_thread_loop' it creates a
local 'VncState'. The connection 'VcnState' and local 'VncState' exchange
data in 'vnc_async_encoding_start' and 'vnc_async_encoding_end'.
In 'zrle_compress_data' it calls 'deflateInit2' to allocate the libz library
opaque data. The 'VncState' used in 'zrle_compress_data' is the local
'VncState'. In 'vnc_zrle_clear' it calls 'deflateEnd' to free the libz
library opaque data. The 'VncState' used in 'vnc_zrle_clear' is the connection
'VncState'. In currently implementation there will be a memory leak when the
vnc disconnect. Following is the asan output backtrack:
Direct leak of 29760 byte(s) in 5 object(s) allocated from:
0 0xffffa67ef3c3 in __interceptor_calloc (/lib64/libasan.so.4+0xd33c3)
1 0xffffa65071cb in g_malloc0 (/lib64/libglib-2.0.so.0+0x571cb)
2 0xffffa5e968f7 in deflateInit2_ (/lib64/libz.so.1+0x78f7)
3 0xaaaacec58613 in zrle_compress_data ui/vnc-enc-zrle.c:87
4 0xaaaacec58613 in zrle_send_framebuffer_update ui/vnc-enc-zrle.c:344
5 0xaaaacec34e77 in vnc_send_framebuffer_update ui/vnc.c:919
6 0xaaaacec5e023 in vnc_worker_thread_loop ui/vnc-jobs.c:271
7 0xaaaacec5e5e7 in vnc_worker_thread ui/vnc-jobs.c:340
8 0xaaaacee4d3c3 in qemu_thread_start util/qemu-thread-posix.c:502
9 0xffffa544e8bb in start_thread (/lib64/libpthread.so.0+0x78bb)
10 0xffffa53965cb in thread_start (/lib64/libc.so.6+0xd55cb)
This is because the opaque allocated in 'deflateInit2' is not freed in
'deflateEnd'. The reason is that the 'deflateEnd' calls 'deflateStateCheck'
and in the latter will check whether 's->strm != strm'(libz's data structure).
This check will be true so in 'deflateEnd' it just return 'Z_STREAM_ERROR' and
not free the data allocated in 'deflateInit2'.
The reason this happens is that the 'VncState' contains the whole 'VncZrle',
so when calling 'deflateInit2', the 's->strm' will be the local address.
So 's->strm != strm' will be true.
To fix this issue, we need to make 'zrle' of 'VncState' to be a pointer.
Then the connection 'VncState' and local 'VncState' exchange mechanism will
work as expection. The 'tight' of 'VncState' has the same issue, let's also turn
it to a pointer.
Reported-by: Ying Fang <fangying1@huawei.com>
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-id: 20190831153922.121308-1-liq3ea@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Audio functions no longer access glob_audio_state, instead they get an
AudioState as a parameter. This is required in order to support
multiple backends.
glob_audio_state is also gone, and replaced with a tailq so we can store
more than one states.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 67aef54f9e729a7160fe95c465351115e392164b.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
docs/devel/tracing.txt explains "since many source files include
trace.h, [the generated trace.h use] a minimum of types and other
header files included to keep the namespace clean and compile times
and dependencies down."
Commit 4815185902 "trace: Add per-vCPU tracing states for events with
the 'vcpu' property" made them all include qom/cpu.h via
control-internal.h. qom/cpu.h in turn includes about thirty headers.
Ouch.
Per-vCPU tracing is currently not supported in sub-directories'
trace-events. In other words, qom/cpu.h can only be used in
trace-root.h, not in any trace.h.
Split trace/control-vcpu.h off trace/control.h and
trace/control-internal.h. Have the generated trace.h include
trace/control.h (which no longer includes qom/cpu.h), and trace-root.h
include trace/control-vcpu.h (which includes it).
The resulting improvement is a bit disappointing: in my "build
everything" tree, some 1100 out of 6600 objects (not counting tests
and objects that don't depend on qemu/osdep.h) depend on a trace.h,
and about 600 of them no longer depend on qom/cpu.h. But more than
1300 others depend on trace-root.h. More work is clearly needed.
Left for another day.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-8-armbru@redhat.com>
Use a better interface for random numbers than rand().
Fail gracefully if for some reason we cannot use the crypto system.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There were 3 copies of this code, one of which used the wrong
data size for the failure indicator.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
I had to include an enum for audio sampling formats into qapi, but that
meant duplicating the audfmt_e enum. This patch replaces audfmt_e and
associated values with the qapi generated AudioFormat enum.
This patch is mostly a search-and-replace, except for switches where the
qapi generated AUDIO_FORMAT_MAX caused problems.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 01251b2758a1679c66842120b77c0fb46d7d0eaf.1552083282.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The VNC server has historically had support for ACLs to check both the
SASL username and the TLS x509 distinguished name. The VNC server was
responsible for creating the initial ACL, and the client app was then
responsible for populating it with rules using the HMP 'acl_add' command.
This is not satisfactory for a variety of reasons. There is no way to
populate the ACLs from the command line, users are forced to use the
HMP. With multiple network services all supporting TLS and ACLs now, it
is desirable to be able to define a single ACL that is referenced by all
services.
To address these limitations, two new options are added to the VNC
server CLI. The 'tls-authz' option takes the ID of a QAuthZ object to
use for checking TLS x509 distinguished names, and the 'sasl-authz'
option takes the ID of another object to use for checking SASL usernames.
In this example, we setup two authorization rules. The first allows any
client with a certificate issued by the 'RedHat' organization in the
'London' locality. The second ACL allows clients with either the
'joe@REDHAT.COM' or 'fred@REDHAT.COM' kerberos usernames. Both checks
must pass for the user to be allowed.
$QEMU -object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\
endpoint=server,verify-peer=yes \
-object authz-simple,id=authz0,policy=deny,\
rules.0.match=O=RedHat,,L=London,rules.0.policy=allow \
-object authz-simple,id=authz1,policy=deny,\
rules.0.match=fred@REDHAT.COM,rules.0.policy=allow \
rules.0.match=joe@REDHAT.COM,rules.0.policy=allow \
-vnc 0.0.0.0:1,tls-creds=tls0,tls-authz=authz0,
sasl,sasl-authz=authz1 \
...other QEMU args...
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20190227145755.26556-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vnc aborts display update jobs on video mode switches and page flips.
That can cause vnc update stalls in case an unfinished vnc job gets
aborted. The vnc client will never receive the requested update then.
Fix that by copying the state from job_update back to update in that
case.
Reports complain about stalls with two or more clients being connected
at the same time, on some but not all connections. I suspect it can
also happen with a single connection, multiple connections only make
this more much likely to happen.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1662260
Reported-by: Ying Fang <fangying1@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ying Fang <fangying1@huawei.com>
Message-id: 20190305130930.24516-1-kraxel@redhat.com
The 'qemu_acl' type was a previous non-QOM based attempt to provide an
authorization facility in QEMU. Because it is non-QOM based it cannot be
created via the command line and requires special monitor commands to
manipulate it.
The new QAuthZ subclasses provide a superset of the functionality in
qemu_acl, so the latter can now be deleted. The HMP 'acl_*' monitor
commands are converted to use the new QAuthZSimple data type instead
in order to provide temporary backwards compatibility.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Having to include qapi-events.h just for QAPIEvent is suboptimal, but
quite tolerable now. It'll become problematic when we have events
conditional on the target, because then qapi-events.h won't be usable
from target-independent code anymore. Avoid that by generating it
into separate files.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-6-armbru@redhat.com>
It is possible that the modifier state on keyup is different from the
modifier state on keydown. In that case the keycode lookup can end up
with different keys in case multiple keysym -> keycode mappings exist,
because it picks the mapping depending on modifier state.
To fix that change the lookup logic for keyup events. Instead of
looking at the modifier state check the key state and prefer a keycodes
where the key is in "down" state right now.
Fixes: abb4f2c965 keymap: consider modifier state when picking a mapping
Buglink: https://bugs.launchpad.net/bugs/1738283
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1658676
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-9-kraxel@redhat.com
Pass the keyboard state tracker handle down to keysym2scancode(),
so the code can fully inspect the keyboard state as needed. No
functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-8-kraxel@redhat.com
Use the new keyboard state tracked for vnc. Allows to drop the
vnc-specific modifier state tracking code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190122092814.14919-7-kraxel@redhat.com
