Move mon->error handling to its caller handle_qmp_command().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
All QMP commands use the "new" handler interface (mhandler.cmd_new).
Most HMP commands still use the traditional interface (mhandler.cmd),
but a few use the "new" one. Complicates handle_user_command() for no
gain, so I'm converting these to the traditional interface.
For device_add, that's easy: just wrap the obvious hmp_device_add()
around do_device_add().
monitor_user_noop() is now unused, drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Protocol must be spice, vnc isn't implemented. Fix up documentation.
Attempts to use vnc or any other unknown protocol yield the misleading
error message "Invalid parameter 'protocol'". Improve it to
"Parameter 'protocol' expects spice".
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by. Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Inline qmp_call_cmd() along with its helper handler_audit() into its
only caller handle_qmp_command(), and simplify the result.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
The asynchronous monitor command interface goes back to commit 940cc30
(Jan 2010). Added a third case to command execution. The hope back
then according to the commit message was that all commands get
converted to the asynchronous interface, killing off the other two
cases. Didn't happen.
The initial asynchronous commands balloon and info balloon were
converted back to synchronous long ago (commit 96637bc and d72f32),
with commit messages calling the asynchronous interface "not fully
working" and "deprecated". The only other user went away in commit
3b5704b.
New code generally uses synchronous commands and asynchronous events.
What exactly is still "not fully working" with asynchronous commands?
Well, here's a bug that defeats actual asynchronous use pretty
reliably: the reply's ID is wrong (and has always been wrong) unless
you use the command synchronously! To reproduce, we need an
asynchronous command, so we have to go back before commit 3b5704b.
Run QEMU with spice:
$ qemu-system-x86_64 -nodefaults -S -spice port=5900,disable-ticketing -qmp stdio
{"QMP": {"version": {"qemu": {"micro": 94, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}}
Connect a spice client in another terminal:
$ remote-viewer spice://localhost:5900
Set up a migration destination dummy in a third terminal:
$ socat TCP-LISTEN:12345 STDIO
Now paste the following into the QMP monitor:
{ "execute": "qmp_capabilities", "id": "i0" }
{ "execute": "client_migrate_info", "id": "i1", "arguments": { "protocol": "spice", "hostname": "localhost", "port": 12345 } }
{ "execute": "query-kvm", "id": "i2" }
Produces two replies immediately, one to qmp_capabilities, and one to
query-kvm:
{"return": {}, "id": "i0"}
{"return": {"enabled": false, "present": true}, "id": "i2"}
Both are correct. Two lines of debug output from libspice-server not
shown.
Now EOF socat's standard input to make it close the connection. This
makes the asynchronous client_migrate_info complete. It replies:
{"return": {}}
Bug: "id": "i1" is missing. Two lines of debug output from
libspice-server not shown. Cherry on top: storage for the missing ID
is leaked.
Get rid of this stuff before somebody hurts himself with it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVUFj/AAoJECgfDbjSjVRpteQH+gKoOMKilM6qvgdQS9vduFJ+
lDHNnmfgzWjVMEetiUOc9hImfEEyTyDFrkSI3wf4a8RZ7UnnDKD8hZR1nToySJPd
SuDP/EdtXYtInIMjc1MUUrJEP6qtjjgM+IbikVzHDxCeekrTMFz2w05MZ+V+hxI5
8b8ndPNfjX3ciIRjHKZ2u6hKEemhzxr1yyKTnJVGDN07hmfMbCyLsiWnFfShZwfv
g7USgiXjFfpvU5Q7QWpiCapfAaEpevRqieGzRjSbPy5Frm3XT7v+hWbFnvIJqUPj
5/SMV8I4qtKQe15Qah292HB//oaFM/AvRtHWvQkre3YIqFwyCYimQtjqoRCYC1E=
=x0ub
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, virtio enhancements
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon May 11 08:23:43 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
acpi: update expected files for memory unplug
virtio-scsi: Move DEFINE_VIRTIO_SCSI_FEATURES to virtio-scsi
virtio-net: Move DEFINE_VIRTIO_NET_FEATURES to virtio-net
pci: Merge pci_nic_init() into pci_nic_init_nofail()
acpi: add a missing backslash to the \_SB scope.
qmp-event: add event notification for memory hot unplug error
acpi: add hardware implementation for memory hot unplug
acpi: fix "Memory device control fields" register
acpi: extend aml_field() to support UpdateRule
acpi, mem-hotplug: add unplug cb for memory device
acpi, mem-hotplug: add unplug request cb for memory device
acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus
docs: update documentation for memory hot unplug
virtio: coding style tweak
pci: remove hard-coded bar size in msix_init_exclusive_bar()
virtio-pci: speedup MSI-X masking and unmasking
virtio: introduce vector to virtqueues mapping
virtio-ccw: using VIRTIO_NO_VECTOR instead of 0 for invalid virtqueue
monitor: check return value of qemu_find_net_clients_except()
monitor: replace the magic number 255 with MAX_QUEUE_NUM
...
Conflicts:
hw/s390x/s390-virtio-bus.c
[PMM: fixed conflict in s390_virtio_scsi_properties and
s390_virtio_net_properties arrays; since the result of the
two conflicting patches is to empty the property arrays
completely, the conflict resolution is to remove them entirely.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the hmp interface to tune and query the parameters used in
live migration.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The functions ringbuf_read_completion() and monitor_get_rs()
are not used anywhere anymore, so let's remove them.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
* memory system updates to support transaction attributes
* set user-mode and secure attributes for accesses made by ARM CPUs
* rename c1_coproc to cpacr_el1
* adjust id_aa64pfr0 when has_el3 CPU property disabled
* allow ARMv8 SCR.SMD updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hDRI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150427' into staging
target-arm queue:
* memory system updates to support transaction attributes
* set user-mode and secure attributes for accesses made by ARM CPUs
* rename c1_coproc to cpacr_el1
* adjust id_aa64pfr0 when has_el3 CPU property disabled
* allow ARMv8 SCR.SMD updates
# gpg: Signature made Mon Apr 27 16:14:30 2015 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150427:
Allow ARMv8 SCR.SMD updates
target-arm: Adjust id_aa64pfr0 when has_el3 CPU property disabled
target-arm: rename c1_coproc to cpacr_el1
target-arm: Check watchpoints against CPU security state
target-arm: Use attribute info to handle user-only watchpoints
target-arm: Add user-mode transaction attribute
target-arm: Use correct memory attributes for page table walks
target-arm: Honour NS bits in page tables
Switch non-CPU callers from ld/st*_phys to address_space_ld/st*
exec.c: Capture the memory attributes for a watchpoint hit
exec.c: Add new address_space_ld*/st* functions
exec.c: Make address_space_rw take transaction attributes
exec.c: Convert subpage memory ops to _with_attrs
Add MemTxAttrs to the IOTLB
Make CPU iotlb a structure rather than a plain hwaddr
memory: Replace io_mem_read/write with memory_region_dispatch_read/write
memory: Define API for MemoryRegionOps to take attrs and return status
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_find_net_clients_except() may return a value which is greater
than the size of array we provided. So we should check this value
before using it, otherwise this may cause unexpected memory access.
This patch fixes the net related command completion when we have a
virtio-net nic with more than 255 queues.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch replace the magic number 255, and increase it to
MAX_QUEUE_NUM which is maximum number of queues supported by a nic.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Live migration with spice works like this today:
(1) client_migrate_info monitor cmd
(2) spice server notifies client, client connects to target host.
(3) qemu waits until spice client connect is finished.
(4) send over vmstate (i.e. main part of live migration).
(5) spice handover to target host.
(3) is implemented by making client_migrate_info a async monitor
command. This is the only async monitor command we have.
The original reason to implement this dance was that qemu did not accept
new tcp connections while the incoming migration was running, so (2) and
(4) could not be done in parallel. That issue was fixed long ago though.
Qemu version 1.3.0 (released Dec 2012) and newer happily accept tcp
connects while the incoming migration runs.
Time to drop step (3). This patch does exactly that, by making the
monitor command synchronous and removing the code needed to handle the
async monitor command in ui/spice-core.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Switch all the uses of ld/st*_phys to address_space_ld/st*,
except for those cases where the address space is the CPU's
(ie cs->as). This was done with the following script which
generates a Coccinelle patch.
A few over-80-columns lines in the result were rewrapped by
hand where Coccinelle failed to do the wrapping automatically,
as well as one location where it didn't put a line-continuation
'\' when wrapping lines on a change made to a match inside
a macro definition.
===begin===
#!/bin/sh -e
# Usage:
# ./ldst-phys.spatch.sh > ldst-phys.spatch
# spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch
# patch -p1 < out.patch
for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do
cat <<EOF
@ cpu_matches_ld_${FN} @
expression E1,E2;
identifier as;
@@
ld${FN}_phys(E1->as,E2)
@ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @
expression E1,E2;
@@
-ld${FN}_phys(E1,E2)
+address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
for FN in b w_le w_be l_le l_be q_le q_be w l q; do
cat <<EOF
@ cpu_matches_st_${FN} @
expression E1,E2,E3;
identifier as;
@@
st${FN}_phys(E1->as,E2,E3)
@ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @
expression E1,E2,E3;
@@
-st${FN}_phys(E1,E2,E3)
+address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
===endit===
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Pretending that QMP doesn't understand a command merely because
we are not in the right mode doesn't help first-time users figure
out what to do to correct things. Although the documentation for
QMP calls out capabilities negotiation, we should also make it
clear in our error messages what we were expecting. With this
patch, I now get the following transcript:
$ ./x86_64-softmmu/qemu-system-x86_64 -qmp stdio -nodefaults
{"QMP": {"version": {"qemu": {"micro": 93, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}}
{"execute":"huh"}
{"error": {"class": "CommandNotFound", "desc": "The command huh has not been found"}}
{"execute":"quit"}
{"error": {"class": "CommandNotFound", "desc": "Expecting capabilities negotiation with 'qmp_capabilities' before command 'quit'"}}
{"execute":"qmp_capabilities"}
{"return": {}}
{"execute":"qmp_capabilities"}
{"error": {"class": "CommandNotFound", "desc": "Capabilities negotiation is already complete, command 'qmp_capabilities' ignored"}}
{"execute":"quit"}
{"return": {}}
{"timestamp": {"seconds": 1429110729, "microseconds": 181935}, "event": "SHUTDOWN"}
Signed-off-by: Eric Blake <eblake@redhat.com>
Tested-By: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Paulo Vital <paulo.vital@profitbricks.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2ed1ebcf6 "timer: replace time() with QEMU_CLOCK_HOST" broke compile
when configured with --enable-profiler. Turned out the profiler has been
broken for a while.
This does s/qemu_time/tcg_time/ as the profiler only works in a TCG mode.
This also fixes the compile error.
This changes profile_getclock() to return nanoseconds rather than
CPU ticks as the "profile" HMP command prints seconds and there is no
platform-independent way to get ticks-per-second rate.
Since TCG is quite slow and get_clock() returns nanoseconds (fine
enough), this should not affect precision much.
This removes unused qemu_time_start and tlb_flush_time.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <1426478258-29961-1-git-send-email-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To complement qdev's bus-oriented info qtree, info qom-tree
prints a hierarchical view of the QOM composition tree.
By default, the machine composition tree is shown. This can be overriden
by supplying a path argument, such as "info qom-tree /".
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
monitor_read_bdrv_key_start() does several things:
1. If no key is needed, call completion_cb() and succeed
2. If we're in QMP context, call qerror_report_err() and fail
3. Start reading the key in the monitor.
This is two things too many. Inline 1. and 2. into its callers
monitor_read_block_device_key() and usb_msd_realize_storage().
Since monitor_read_block_device_key() only ever runs in HMP context,
drop 2. there.
The next commit will clean up the result in usb_msd_realize_storage().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Function is only called in HMP context since commit 333a96e "qapi:
Convert change".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* remotes/qmp-unstable/queue/qmp:
qapi-types: add C99 index names to arrays
monitor: Fix missing err = NULL in client_migrate_info()
balloon: Fix typo
hmp: Fix warning from smatch (wrong argument in function call)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Not all sysemu.h users need the NUMA declarations, and keeping them in a
separate file makes it easier to see what are the interfaces provided by
numa.c.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When SPICE isn't used, we either fail an assertion in error_set(),
or leak an error object. Broken in commit b25d81b.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.
Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.
Exceptions:
* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
sun4m_hmp_info_pic().
* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
lm32_hmp_info_pic().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.
Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.
Exceptions:
* do_device_add() and client_migrate_info() *not* renamed to
hmp_device_add(), hmp_client_migrate_info(), because they're also
QMP handlers. They still need to be converted to QAPI.
* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
hmp_i(), hmp_o(), because those names are too cryptic for my taste.
* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
because it only covers help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err() in HMP command handler
hmp_trace_event().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
monitor_handle_fd_param() is a wrapper around
monitor_handle_fd_param2() that feeds errors to qerror_report_err()
instead of returning them. qerror_report_err() is inappropriate in
many contexts. monitor_handle_fd_param() looks simpler than
monitor_handle_fd_param2(), which tempts use. Remove the temptation:
drop the wrapper and open-code the (trivial) error handling instead.
Replace the open-coded qerror_report_err() by error_report_err() in
places that already use error_report(). Turns out that's everywhere.
While there, rename monitor_handle_fd_param2() to monitor_fd_param().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1422524221-8566-4-git-send-email-armbru@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJU1MtgAAoJEJykq7OBq3PId6IH/2p7BZSEal1CqmxgmcAyRxrB
IZ3RkDKyCF3ELBozvJ9RLHEakARVBNBSc4YSiQTFIcE6QYe8rRWXthbo6k6MiCnC
5w3Yh1EdocKLNOU0jCl0yN0cqJyWp6ax//66K4iFn7Q1+LCRVs74JO7z9U7tEXuW
cz3fRzb2OsP2tjUDTsnaIQNs7zewn1w9DgSnhtt9KS6rF9V9qDHeX4pjIcdEM45w
S+YMUaLtTmyTJ55ldq7YCMjBU+3KxFQi8LuEPjCwBMLyLaF35Uy2N99NIHGa0696
P8WAL67SV4YR9KpKIjL3w82Fjx22cpe1cUuxVTkEzCTFKHgq2yzHTdy0I02nhkc=
=9OUs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging
# gpg: Signature made Fri 06 Feb 2015 14:10:40 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/net-pull-request:
monitor: more accurate completion for host_net_remove()
net: del hub port when peer is deleted
net: remove the wrong comment in net_init_hubport()
monitor: print hub port name during info network
rtl8139: simplify timer logic
MAINTAINERS: add Jason Wang as net subsystem maintainer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Current completion for host_net_remove will show hub ports and clients
that were not peered with hub ports. Fix this.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1422860798-17495-4-git-send-email-jasowang@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The QERR_ macros are leftovers from the days of "rich" error objects.
They're used with error_set() and qerror_report(), and expand into the
first *two* arguments. This trickiness has become pointless. Clean
this one up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Into qemu_using_spice(). For want of a better place, put it next the
existing monitor command handler dummies in qemu-spice.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
The monitor code for doing a memory_dump() was using ld*_raw() to do
target-CPU accesses out of a local buf[] array. The correct functions
for this purpose are ld*_p(), which take a host pointer, rather than
ld*_raw(), which take an integer representing a guest address and
are somewhat meaningless in softmmu configurations. Nobody noticed
because for softmmu the _raw functions are the same as ldl_p but
with some extra casts thrown in. Switch to using the correct functions
instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1421334118-3287-3-git-send-email-peter.maydell@linaro.org
It will be useful for checking when we change traditional
boot order dynamically and propagate error message
to the monitor.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Currently 'info jit' outputs half of the information to monitor and the
rest to qemu log. Dumping opcode counts to monitor as a part of 'info
jit' command doesn't sound useful. Add new monitor command 'info
opcount' that only dumps opcode counters.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Commands with multiple boolean flag options (like 'info block') didn't
provide correct completion because only the first one was skipped.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The optional parameter specifying a block device allows now to use a
node-name instead of a drive name (and therefore to inspect any node in
the graph). The new -n options allows listing all named nodes instead of
BlockBackends.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The commits:
- 6a1fa9f5 (monitor: add del completion for peripheral device)
- 66e56b13 (qdev: add qdev_build_hotpluggable_device_list helper)
cause a QEMU crash when trying to use HMP device_del auto-completion.
It can be easily reproduced by:
<qemu-bin> -enable-kvm ~/images/fedora.qcow2 -monitor stdio -device virtio-net-pci,id=vnet
(qemu) device_del
/home/mapfelba/git/upstream/qemu/hw/core/qdev.c:941:qdev_build_hotpluggable_device_list: Object 0x7f6ce04e4fe0 is not an instance of type device
Aborted (core dumped)
The root cause is qdev_build_hotpluggable_device_list going recursively over
all peripherals and their children assuming all are devices. It doesn't work
since PCI devices have at least on child which is a memory region (bus master).
Solved by observing that all devices appear as direct children of
/machine/peripheral container. No need of going recursively
over all the children.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reported-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1417002601-20799-1-git-send-email-marcel.a@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
