It is not needed, because s->bs is already stored in SCSIDevice, and
can be reached from the conf.bs member.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Flush does not go anymore through scsi_disk_emulate_command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested by the Windows Logo Kit SCSI Compliance test. From SBC-3, paragraph
5.25: "The LOGICAL BLOCK ADDRESS field shall be set to zero if the PMI
bit is set to zero. If the PMI bit is set to zero and the LOGICAL BLOCK
ADDRESS field is not set to zero, then the device server shall terminate
the command with CHECK CONDITION status with the sense key set to ILLEGAL
REQUEST and the additional sense code set to INVALID FIELD IN CDB".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This also requires little more than adding the new argument to
scsi_device_find, and the qdev property. All devices by default
end up on channel 0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This only requires changes in two places: in SCSIBus, we need to look
for a free LUN if somebody creates a device with a pre-existing scsi-id
but the default LUN (-1, meaning "search for a free spot"); in vSCSI,
we need to actually parse the LUN according to the SCSI spec.
For vSCSI, max_target/max_lun are set according to the logical unit
addressing format in SAM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change the devs array into a linked list, and add a scsi_device_find
function to navigate the children list instead. This lets the SCSI
bus use more complex addressing, and HBAs can talk to the correct device
when there are multiple LUNs per target.
scsi_device_find may return another LUN on the same target if none is
found that matches exactly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
SCSI buses will need to read the children list first-to-last. This
requires using a QTAILQ, because hell breaks loose if you just try
inserting at the tail (thus reversing the order of all existing
visits from last-to-first to first-to-tail).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds support for media change notification via the GET EVENT STATUS
NOTIFICATION command, used by Linux versions 2.6.38 and newer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds to scsi-disk the missing mode page 0x01 for both disk
and CD-ROM drives, and mode page 0x0e for CD drives only.
A few offsets were wrong in atapi.c. Also change the 2Ah mode page to
expose DVD media read capabilities in the IDE cdrom. This lets you run
dvd+rw-mediainfo on the virtual DVD drives.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A small refactoring of the MODE SENSE implementation in scsi-disk.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a few stub implementations for MMC commands to
scsi-disk, to be filled in later in the series. It also adds to
scsi-defs.h constants for commands implemented by ide/atapi.c,
when missing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Building on the previous patch, this one adds a media change callback
to scsi-disk.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reporting media change events via unit attention sense codes requires
a small state machine: first report "NO MEDIUM", then report "MEDIUM MAY
HAVE CHANGED". Unfortunately there is no good hooking point for the
device to notice that its pending unit attention condition has been
reported. This patch reworks the generic machinery to add one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The first two bytes (after the 8-byte ATAPI header) are the mode page
number and the number of bytes after the length field itself. Make
this clear in the code.
The AUDIO_CTL page was filled with wrong values. It is not anymore in
MMC, but at least keep the values sane.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As a complement to the previous patch, move definitions for GET EVENT
STATUS NOTIFICATION from the two functions to scsi-defs.h.
The NCR_* constants are just bit values corresponding to the ENC_*
values, with no offsets even, so keep just one copy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The definitions in ide/internal.h are duplicates, since ATAPI commands
actually come from SCSI. Use the ones in scsi-defs.h and move the
missing ones there. Two exceptions:
- MODE_PAGE_WRITE_PARMS conflicts with the "flexible disk geometry"
page in scsi-disk.c. It is unused, so pick the latter.
- GPCMD_* is left in ide/internal.h, at least for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Windows 7 may use the same stream number for input and output.
Current code will confuse streams.
Changes since v1:
- keep running_compat[] for migration version 1
- add running_real[] for migration version 2
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Windows 7 may use the same stream number for input and output.
That will result in lot of garbage on playback.
The hardcoded value of 4 needs to be in sync with GCAP streams
description and IN/OUT registers.
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Fix incorrect order of arguments, letting writes to NVRAM succeed.
It looks like guests never write to the device, only read from it, since the bug
originates back to 819385c58b.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit 63ffb564 broke floppy devices specified on the command line like
-drive file=...,if=none,id=floppy -global isa-fdc.driveA=floppy because it
relies on drive_get() which works only with -fda/-drive if=floppy.
This patch resembles what we're already doing for IDE, i.e. remember the floppy
device that was created and use that to extract the BlockDriverStates where
needed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
The floppy device was broken by commit 212ec7ba (fdc: Convert to
isa_register_portio_list). While the old interface provided the port number
relative to the floppy drive's io_base, the new one provides the real port
number, so we need to apply a bitmask now to get the register number.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The synchronous .bdrv_flush callback doesn't exist any more and a device really
shouldn't poke into the block layer internals anyway. All drivers are supposed
to have a correctly working bdrv_flush, so let's just hard-code this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
irq_target array saving/loading is in the wrong loop.
Version bump.
Signed-off-by: Dmitry Koshelev <karaghiozis@gmail.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
The OMAP2430 version of the omap-gpio device has five GPIO modules,
not four like the other OMAP2 versions; wire up the fifth module's
IRQ line correctly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Now the function returned errno, so it is better the new name.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
QEMUFile * is only intended for migration nowadays. Using it for
anything else just adds pain and a layer of buffers for no good
reason.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
