Let devices specify transaction attributes when calling
dma_buf_read().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-13-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_buf_write().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-12-philmd@redhat.com>
Rename qbus_create_inplace() to qbus_init(); this is more in line
with our usual naming convention for functions that in-place
initialize objects.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20210923121153.23754-5-peter.maydell@linaro.org
Currently, FUSED operations are not supported by QEMU. As per the 1.4 SPEC,
controller should abort the command that requested a fused operation with
an INVALID FIELD error code if they are not supported.
Changes from v1:
Added FUSE flag check also to the admin cmd processing as the FUSED
operations are mentioned in the general SQE section in the SPEC.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Fix is added to check for reserved value in select field for
namespace attachment
CC: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Address 0x0 is a valid address. Fix the admin submission and completion
queue address validation to not error out on this.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Coverity found that 'uuid', 'csi' and 'eui64' are uninitialized. While
we set most of the fields, we do not explicitly set the rsvd2 field in
the NvmeIdNsDescr header.
Fix this by explicitly zero-initializing the variables.
Reported-by: Coverity (CID 1458835, 1459295 and 1459580)
Fixes: 6870cfb814 ("hw/nvme: namespace parameter for EUI-64")
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The new PMR test unearthed a long-standing issue with MMIO reads on
big-endian hosts.
Fix this by unconditionally storing all controller registers in little
endian.
Cc: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Peter noticed that mmio access may read into the NvmeParams member in
the NvmeCtrl struct.
Fix the bounds check.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Add the NvmeBarRegs enum and use these instead of explicit register
offsets.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The specification uses a set of 32 bit PMRMSCL and PMRMSCU registers to
make up the 64 bit logical PMRMSC register.
Make it so.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch the nvme-ns devices are always children of the
NvmeBus owned by the NvmeCtrl. This causes the namespaces to be
unrealized when the parent device is removed. However, when subsystems
are involved, this is not what we want since the namespaces may be
attached to other controllers as well.
This patch adds an additional NvmeBus on the subsystem device. When
nvme-ns devices are realized, if the parent controller device is linked
to a subsystem, the parent bus is set to the subsystem one instead. This
makes sure that namespaces are kept alive and not unrealized.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
If the number of PRP/SGL mappings exceed 1024, reads and writes will
fail because of an internal QEMU limitation of max 1024 vectors.
Signed-off-by: Padmakar Kalghatgi <p.kalghatgi@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
[k.jensen: changed the error message to be more generic]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Make sure the controller is unregistered from the subsystem when device
is removed.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The nvme_ns_setup and nvme_ns_check_constraints should not depend on the
controller state. Refactor and remove it.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Jakub noticed[1] that, when using pin-based interrupts, the device will
unconditionally deasssert when any CQEs are acknowledged. However, the
pin should not be deasserted if other completion queues still holds
unacknowledged CQEs.
The bug is an artifact of commit ca247d3509 ("hw/block/nvme: fix
pin-based interrupt behavior") which fixed one bug but introduced
another. This is the third time someone tries to fix pin-based
interrupts (see commit 5e9aa92eb1 ("hw/block: Fix pin-based interrupt
behaviour of NVMe"))...
Third time's the charm, so fix it, again, by keeping track of how many
CQs have unacknowledged CQEs and only deassert when all are cleared.
[1]: <20210610114624.304681-1-jakub.jermar@kernkonzept.com>
Cc: qemu-stable@nongnu.org
Fixes: ca247d3509 ("hw/block/nvme: fix pin-based interrupt behavior")
Reported-by: Jakub Jermář <jakub.jermar@kernkonzept.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Qiang Liu reported that an access on an unknown address is triggered in
memory_region_set_enabled because a check on CAP.PMRS is missing for the
PMRCTL register write when no PMR is configured.
Cc: qemu-stable@nongnu.org
Fixes: 75c3c9de96 ("hw/block/nvme: disable PMR at boot up")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/362
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
In the documentation of the '-detached' param "be" and "not" has been
used side by side, fix that.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add the controller identifiers list CNS 0x13, available list of ctrls
in NVM Subsystem that may or may not be attached to namespaces.
In Identify Ctrl List of the CNS 0x12 and 0x13 no endian conversion
for the nsid field.
These two CNS values shows affect when there exists a Subsystem.
Added condition if there is no Subsystem return invalid field in
command.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This partially reverts commit 98f84f5a4e.
Since all "multi aio" commands are now reimplemented to properly track
the nested aiocbs, we can revert the "hack" that was introduced to make
sure all requests we're properly drained upon sq deletion.
The revert is partial since we keep the assert that no outstanding
requests remain on the submission queue after the explicit cancellation.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, the aios associated with broadcast format are
submitted anonymously (no aiocb reference saved from the blk_aio call).
Fix this by formatting the namespaces one after another, saving a
reference to the aiocb for each.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, the aios associated with zone reset are submitted
anonymously (no reference saved to the aiocb from the blk_aio call).
Fix this by resetting the zones one after another, saving a reference to
the aiocb for each reset.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Before this patch the code would issue several aios simultaneously
without saving a reference to the aiocb. Without the aiocb reference the
individual copies cannot be canceled.
Fix this by issuing copies of the ranges one after another.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Some commands report additional useful information in dw0 and dw1 of the
completion queue entry.
Add them to the trace.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The nvme_check_prinfo() and nvme_dif_check() functions operate on the
16 bit "control" member of the NvmeCmd. These functions do not otherwise
operate on an NvmeCmd or an NvmeRequest, so change them to expect the
actual 4 bit PRINFO field and add constants that work on this field as
well.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Make nvme_get_zone_by_slba() return NULL if the slba is out of range.
This allows the function to be used without guarding the call with a
call to nvme_check_bounds(), in preparation for the next patch.
Add asserts after calling nvme_get_zone_by_slba() instead.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prepare nvme_dif_pract_generate_dif() and nvme_dif_check() to be
callable in smaller increments by making the reftag a pointer parameter
updated by the function.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, a loop was used to issue multiple "fire and forget"
aios for each range in the command. Without a reference to the aiocb
returned from the blk_aio_pdiscard calls, the aios cannot be canceled.
Fix this by processing the ranges one after another.
As a bonus, this fixes how metadata is cleared (i.e. we only zero it out
if the data was succesfully discarded).
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Pull the gist of nvme_check_dulbe() into a helper function. This is in
preparation for dsm refactoring.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch, a broadcast flush would result in submitting
multiple "fire and forget" aios (no reference saved to the aiocbs
returned from the blk_aio_flush calls).
Fix this by issuing the flushes one after another.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The EUI-64 field is the only identifier for NVMe namespaces in UEFI device
paths. Add a new namespace property "eui64", that provides the user the
option to specify the EUI-64.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
As per the TP 4056d Namespace types CNS 0x00 and CNS 0x11
CSI field shouldn't use but it is being used for these two
Identify command CNS values, fix that.
Remove 'nvme_csi_has_nvm_support()' helper as suggested by
Klaus we can safely assume NVM command set support for all
namespaces.
Suggested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
In the Zoned Namespace Command Set Specification, chapter
2.5.1 Managing resources
"The controller may transition zones in the ZSIO:Implicitly Opened state
to the ZSC:Closed state for resource management purposes."
The word may in this sentence means that automatically transitioning
an implicitly opened zone to closed is completely optional.
Add a new parameter so that the user can control if this automatic
transitioning should be performed or not.
Being able to control this can help with verifying that e.g. a user-space
program behaves properly even without this optional ZNS feature.
The default value is set to true, in order to not change the existing
behavior.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
[k.jensen: moved parameter to controller]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
With the introduction of the nvme-subsystem device we are really
cluttering up the hw/block directory.
As suggested by Philippe previously, move the nvme emulation to hw/nvme.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
