Move it to the actual users. There are still a few includes of
qemu/bswap.h in headers; removing them is left for future work.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now they are invalidated by the block layer, so it's not necessary to
do this in block drivers' implementations of .bdrv_invalidate_cache.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have several block drivers that understand BDRV_REQ_FUA,
and emulate it in the block layer for the rest by a full flush.
But without a way to actually request BDRV_REQ_FUA during a
pass-through blk_pwrite(), FUA-aware block drivers like NBD are
forced to repeat the emulation logic of a full flush regardless
of whether the backend they are writing to could do it more
efficiently.
This patch just wires up a flags argument; followup patches
will actually make use of it in the NBD driver and in qemu-io.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All callers of blk_new_open() either don't rely on the WCE bit set after
blk_new_open() because they explicitly set it anyway, or they pass
BDRV_O_CACHE_WB unconditionally.
This patch changes blk_new_open() so that it always enables writeback
mode and asserts that BDRV_O_CACHE_WB is clear. For those callers that
used to pass BDRV_O_CACHE_WB unconditionally, the flag is removed now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed. This replacement improves the readability and
understandability of code.
For example,
timer_mod(fdctrl->result_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));
NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.
Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before this patch, blk_new() automatically assigned a name to the new
BlockBackend and considered it referenced by the monitor. This patch
removes the implicit monitor_add_blk() call from blk_new() (and
consequently the monitor_remove_blk() call from blk_delete(), too) and
thus blk_new() (and related functions) no longer take a BB name
argument.
In fact, there is only a single point where blk_new()/blk_new_open() is
called and the new BB is monitor-owned, and that is in blockdev_init().
Besides thus relieving us from having to invent names for all of the BBs
we use in qemu-img, this fixes a bug where qemu cannot create a new
image if there already is a monitor-owned BB named "image".
If a BB and its BDS tree are created in a single operation, as of this
patch the BDS tree will be created before the BB is given a name
(whereas it was the other way around before). This results in minor
change to the output of iotest 087, whose reference output is amended
accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just specifying a custom string is simpler in basically all places that
used it, and in addition, specifying the BB or node name is something we
generally do not do in other error messages when opening a BDS, so we
should not do it here.
This changes the output for iotest 036 (to the better, in my opinion),
so the reference output needs to be changed accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit df9a681dc9.
Note that commit df9a681dc9 included some
unrelated hunks, possibly due to a merge failure or an overlooked
squash. This only reverts the qed .bdrv_drain() implementation.
The qed .bdrv_drain() implementation is unsafe and can lead to a double
request completion.
Paolo Bonzini reports:
"The problem is that bdrv_qed_drain calls qed_plug_allocating_write_reqs
unconditionally, but this is not correct if an allocating write is
queued. In this case, qed_unplug_allocating_write_reqs will restart the
allocating write and possibly cause it to complete. The aiocb however
is still in use for the L2/L1 table writes, and will then be completed
again as soon as the table writes are stable."
For QEMU 2.6 we can simply revert this commit. A full solution for the
qed need check timer may be added if the bdrv_drain() implementation is
extended.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1457431876-8475-1-git-send-email-stefanha@redhat.com
All users of the block layers are supposed to go through a BlockBackend.
The .bdrv_create() implementation is one such user, so this patch
converts it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The added parameter can be used to return the BDS pointer which the
valid offset is referring to. Its value should be ignored unless
BDRV_BLOCK_OFFSET_VALID in ret is set.
Until block drivers fill in the right value, let's clear it explicitly
right before calling .bdrv_get_block_status.
The "bs->file" condition in bdrv_co_get_block_status is kept now to keep iotest
case 102 passing, and will be fixed once all drivers return the right file
pointer.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1453780743-16806-2-git-send-email-famz@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of covering only the state of images on the migration
destination before the migration is completed, the flag will also cover
the state of images on the migration source after completion. This
common state implies that the image is technically still open, but no
writes will happen and any cached contents will be reloaded from disk if
and when the image leaves this state.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Done with this Coccinelle semantic patch
@@
expression FMT, E1, E2;
expression list ARGS;
@@
- error_setg(E1, FMT, ARGS, error_get_pretty(E2));
+ error_propagate(E1, E2);/*###*/
+ error_prepend(E1, FMT/*@@@*/, ARGS);
followed by manual cleanup, first because I can't figure out how to
make Coccinelle transform strings, and second to get rid of now
superfluous error_propagate().
We now use or propagate the original error whole instead of just its
message obtained with error_get_pretty(). This avoids suppressing its
hint (see commit 50b7b00), but I can't see how the errors touched in
this commit could come with hints. It also improves the message
printed with &error_abort when we screw up (see commit 1e9b65b).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The "need_check_timer" is used to clear the "NEED_CHECK" flag in the
image header after a grace period once metadata update has finished. In
compliance to the bdrv_drain semantics we should make sure it remains
deleted once .bdrv_drain is called.
We cannot reuse qed_need_check_timer_cb because here it doesn't satisfy
the assertion. Do the "plug" and "flush" calls manually.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1447064214-29930-10-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_swap() is unused now. Remove it and all functions that have
no other users than bdrv_swap(). In particular, this removes the
.bdrv_rebind callbacks from block drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the final step in converting all of the BlockDriverState
pointers that block drivers use to BdrvChild.
After this patch, bs->children contains the full list of child nodes
that are referenced by a given BDS, and these children are only
referenced through BdrvChild, so that updating the pointer in there is
enough for changing edges in the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch removes the temporary duplication between bs->file and
bs->file_child by converting everything to BdrvChild.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that this parameter is effectively unused, we can drop it and just
pass NULL on to bdrv_open_inherit().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
There are several error messages that identify a BlockDriverState by
its device name. However those errors can be produced in nodes that
don't have a device name associated.
In those cases we should use bdrv_get_device_or_node_name() to fall
back to the node name and produce a more meaningful message. The
messages are also updated to use the more generic term 'node' instead
of 'device'.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 9823a1f0514fdb0692e92868661c38a9e00a12d6.1428485266.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit was generated mechanically by coccinelle from the following
semantic patch:
@@
expression val;
@@
- (ffs(val) - 1)
+ ctz32(val)
The call sites have been audited to ensure the ffs(0) - 1 == -1 case
never occurs (due to input validation, asserts, etc). Therefore we
don't need to worry about the fact that ctz32(0) == 32.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Header size is denoted in clusters. The maximum cluster size is 64 MB
but there is no limit on header size. Check for uint32_t overflow in
case the header size field has a whacky value.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1421065893-18875-2-git-send-email-stefanha@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use it with block backends shortly, and the name is going to fit
badly there. It's a block layer thing anyway, not just a block driver
thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there. It's a block layer thing anyway, not just a
block driver thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
device_name[] can become non-empty only in bdrv_new_root() and
bdrv_move_feature_fields(). The latter is used only to undo damage
done by bdrv_swap(). The former is called only by blk_new_with_bs().
Therefore, when a BlockDriverState's device_name[] is non-empty, then
it's been created with a BlockBackend, and vice versa. Furthermore,
blk_new_with_bs() keeps the two names equal.
Therefore, device_name[] is redundant. Eliminate it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently the file size requested by user is rounded down to nearest
sector, causing the actual file size could be a bit less than the size
user requested. Since some formats (like qcow2) record virtual disk
size in bytes, this can make the last few bytes cannot be accessed.
This patch fixes it by rounding up file size to nearest sector so that
the actual file size is no less than the requested file size.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the qed block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
If a QED image has a shorter backing file and a read request to
unallocated clusters goes across EOF of the backing file, the backing
file sees a shortened request and the rest is filled with zeros.
However, the original too long qiov was used with the shortened request.
This patch makes the qiov size match the request size, avoiding a
potential buffer overflow in raw-posix.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add 'nocow' option so that users could have a chance to set NOCOW flag to
newly created files. It's useful on btrfs file system to enhance performance.
Btrfs has low performance when hosting VM images, even more when the guest
in those VM are also using btrfs as file system. One way to mitigate this bad
performance is to turn off COW attributes on VM files. Generally, there are
two ways to turn off NOCOW on btrfs: a) by mounting fs with nodatacow, then
all newly created files will be NOCOW. b) per file. Add the NOCOW file
attribute. It could only be done to empty or new files.
This patch tries the second way, according to the option, it could add NOCOW
per file.
For most block drivers, since the create file step is in raw-posix.c, so we
can do setting NOCOW flag ioctl in raw-posix.c only.
But there are some exceptions, like block/vpc.c and block/vdi.c, they are
creating file by calling qemu_open directly. For them, do the same setting
NOCOW flag ioctl work in them separately.
[Fixed up 082.out due to the new 'nocow' creation option
--Stefan]
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since we parse backing.* options to add a backing file from the command
line when the driver didn't assign one, it has been possible to have a
backing file for e.g. raw images (it just was never accessed).
This is obvious nonsense and should be rejected.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
One extra change is to define QED_DEFAULT_CLUSTER_SIZE = 65536 instead
of 64 * 1024; because:
according to existing create_options, "cluster size" has default value =
QED_DEFAULT_CLUSTER_SIZE, after switching to create_opts, this has to be
stringized and set to .def_value_str. That is,
.def_value_str = stringify(QED_DEFAULT_CLUSTER_SIZE),
so the QED_DEFAULT_CLUSTER_SIZE could not be a expression.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Change block layer to support both QemuOpts and QEMUOptionParameter.
After this patch, it will change backend drivers one by one. At the end,
QEMUOptionParameter will be removed and only QemuOpts is kept.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. Convert
qemu_bh_new() to aio_bh_new() and qemu_aio_wait() to aio_poll() so we're
using the BlockDriverState's AioContext.
Implement .bdrv_detach/attach_aio_context() interfaces to move the
QED_F_NEED_CHECK timer from the old AioContext to the new one.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch converts fprintf() calls to error_setg() in block/qed.c:bdrv_qed_create()
(error_setg() is part of error reporting API in include/qapi/error.h)
Signed-off-by: Aakriti Gupta <aakritty@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If it returns an error, the migrated VM will not be started, but qemu
exits with an error message.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
After migration has completed, we call bdrv_invalidate_cache() so that
drivers which cache some data drop their stale copy of the data and
reread it from the image file to get a new version of data that the
source modified while the migration was running.
Reloading metadata from the image file is useless, though, if the size
of the image file stays stale (this is a value that is cached for all
image formats in block.c). Reads from (meta)data after the old EOF
return only zeroes, causing image corruption.
We need to update bs->total_sectors in all layers that could potentially
have changed their size (i.e. backing files are not a concern - if they
are changed, we're in bigger trouble)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Returning "Wrong medium type" for an image that does not have a valid
header is a bit weird. Improve the error by mentioning what format
was trying to open it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the bdrv_open() option BDRV_O_PROTOCOL which results in passing the
call to bdrv_file_open(). Additionally, make bdrv_file_open() static and
therefore bdrv_open() the only way to call it.
Consequently, all existing calls to bdrv_file_open() have to be adjusted
to use bdrv_open() with the BDRV_O_PROTOCOL flag instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The QED .bdrv_make_empty() implementation does nothing but return
-ENOTSUP, which causes problems in bdrv_commit(). Since the function
stub exists for QED, it is called, which then always returns an error.
The proper way to not support an optional driver function stub is to
just not implement it, so let's remove the stub.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This function separates filling the BlockLimits from bdrv_open(), which
allows it to call it from other operations which may change the limits
(e.g. modifications to the backing file chain or bdrv_reopen)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Allow specifying a reference to an existing block device (by name) for
bdrv_file_open() instead of a filename and/or options.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will let misaligned but large requests use zero clusters. This
is important because the cluster size is not guest visible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
