commit_top_bs never requests or unshares any permissions. There is no
reason to make this so explicit here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We cannot use bdrv_child_try_set_perm() to give up all restrictions on
the child edge, and still have bdrv_mirror_top_child_perm() request
BLK_PERM_WRITE. Fix this by making bdrv_mirror_top_child_perm() return
0/BLK_PERM_ALL when we want to give up all permissions, and replacing
bdrv_child_try_set_perm() by bdrv_child_refresh_perms().
The bdrv_child_try_set_perm() before removing the node with
bdrv_replace_node() is then unnecessary. No permissions have changed
since the previous invocation of bdrv_child_try_set_perm().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
raw_check_perm() + raw_set_perm() can change the flags associated with
the current FD. If so, we have to update BDRVRawState.open_flags
accordingly. Otherwise, we may keep reopening the FD even though the
current one already has the correct flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drop remaining users of bs->job:
1. assertions actually duplicated by assert(!bs->refcnt)
2. trace-point seems not enough reason to change stream_start to return
BlockJob pointer
3. Restricting creation of two jobs based on same bs is bad idea, as
3.1 Some jobs creates filters to be their main node, so, this check
don't actually prevent creating second job on same real node (which
will create another filter node) (but I hope it is restricted by
other mechanisms)
3.2 Even without bs->job we have two systems of permissions:
op-blockers and BLK_PERM
3.3 We may want to run several jobs on one node one day
And finally, drop bs->job pointer itself. Hurrah!
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to remove bs->job pointer. Drop it's usage in
blk_iostatus_reset.
blk_iostatus_reset() has only two callers:
1. blk_attach_dev(). This doesn't have anything to do with jobs and
attaching a new guest device won't solve any problem the job
encountered, so no reason to reset the iostatus for the job.
2. qmp_cont(). This resets the iostatus for everything. We can just
call block_job_iostatus_reset() for all block jobs instead of going
through BlockBackend.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to remove bs->job pointer. Drop it's usage in replication
code. Additionally we have to return job pointer from some mirror APIs.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Together with @iotypes and @sector, this can be used to trap e.g. the
first read or write access to a certain sector without having to know
what happens internally in the block layer, i.e. which "real" events
happen right before such an access.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This new error option allows users of blkdebug to inject errors only on
certain kinds of I/O operations. Users usually want to make a very
specific operation fail, not just any; but right now they simply hope
that the event that triggers the error injection is followed up with
that very operation. That may not be true, however, because the block
layer is changing (including blkdebug, which may increase the number of
types of I/O operations on which to inject errors).
The new option's default has been chosen to keep backwards
compatibility.
Note that similar to the internal representation, we could choose to
expose this option as a list of I/O types. But there is no practical
use for this, because as described above, users usually know exactly
which kind of operation they want to make fail, so there is no need to
specify multiple I/O types at once. In addition, exposing this option
as a list would require non-trivial changes to qemu_opts_absorb_qdict().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190507203508.18026-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
No reason to keep it separate, it differs from others block driver
behavior and therefore confuses. Instead of generic
'state = (State*)bs->opaque' we have to use special helper.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190611102720.86114-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
No reason for keeping driver handlers realization separate from driver
structure. We can get rid of extra header file.
While being here, fix comments style, restore forgotten comments for
NBD_FOREACH_REPLY_CHUNK and nbd_reply_chunk_iter_receive, remove extra
includes.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190611102720.86114-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Drop one on failure path (we have errp) and turn two others into trace
points.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190611102720.86114-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add missing 'falloc' among the allowed values of 'preallocation'
option; show it and 'full' only when they are supported.
('falloc' is supported if defined CONFIG_GLUSTERFS_FALLOCATE,
'full' is supported if defined CONFIG_GLUSTERFS_ZEROFILL)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190524075848.23781-4-sgarzare@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Show 'falloc' among the allowed values of 'preallocation'
option, only when it is supported (if defined CONFIG_POSIX_FALLOCATE)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190524075848.23781-3-sgarzare@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This fixes at least one overflow in qcow2_process_discards, which
passes 64bit region length to bdrv_pdiscard where bytes (or sectors in
the past) parameter is int since its introduction in 0b919fae.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Let's at least trace ignored failure.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The mirror and commit block jobs use bdrv_set_aio_context() to move
their filter node into the right AioContext before hooking it up in the
graph. Similarly, bdrv_open_backing_file() explicitly moves the backing
file node into the right AioContext first.
This isn't necessary any more, they get automatically moved into the
right context now when attaching them.
However, in the case of bdrv_open_backing_file() with a node reference,
it's actually not only unnecessary, but even wrong: The unchecked
bdrv_set_aio_context() changes the AioContext of the child node even if
other parents require it to retain the old context. So this is not only
a simplification, but a bug fix, too.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1684342
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
So far, we only made sure that updating the AioContext of a node
affected the whole subtree. However, if a node is newly attached to a
new parent, we also need to make sure that both the subtree of the node
and the parent are in the same AioContext. This tries to move the new
child node to the parent AioContext and returns an error if this isn't
possible.
BlockBackends now actually apply their AioContext to their root node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a new parameter to blk_new() which requires its callers to
declare from which AioContext this BlockBackend is going to be used (or
the locks of which AioContext need to be taken anyway).
The given context is only stored and kept up to date when changing
AioContexts. Actually applying the stored AioContext to the root node
is saved for another commit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add an Error parameter to blk_set_aio_context() and use
bdrv_child_try_set_aio_context() internally to check whether all
involved nodes can actually support the AioContext switch.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Callback-based laio_submit() and laio_cancel() were left after
rewriting Linux AIO backend to coroutines in hope that they would be
used in other code that could bypass coroutines. They can be safely
removed because they have not been used since that time.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When ending a drained section, bdrv_do_drained_end() currently first
decrements the quiesce_counter, and only then actually ends the drain.
The bdrv_drain_invoke(bs, false) call may cause graph changes. Say the
graph change involves replacing an existing BB's ("blk") BDS
(blk_bs(blk)) by @bs. Let us introducing the following values:
- bs_oqc = old_quiesce_counter
(so bs->quiesce_counter == bs_oqc - 1)
- obs_qc = blk_bs(blk)->quiesce_counter (before bdrv_drain_invoke())
Let us assume there is no blk_pread_unthrottled() involved, so
blk->quiesce_counter == obs_qc (before bdrv_drain_invoke()).
Now replacing blk_bs(blk) by @bs will reduce blk->quiesce_counter by
obs_qc (making it 0) and increase it by bs_oqc-1 (making it bs_oqc-1).
bdrv_drain_invoke() returns and we invoke bdrv_parent_drained_end().
This will decrement blk->quiesce_counter by one, so it would be -1 --
were there not an assertion against that in blk_root_drained_end().
We therefore have to keep the quiesce_counter up at least until
bdrv_drain_invoke() returns, so that bdrv_parent_drained_end() does the
right thing for the parents @bs got during bdrv_drain_invoke().
But let us delay it even further, namely until bdrv_parent_drained_end()
returns, because then it mirrors bdrv_do_drained_begin(): There, we
first increment the quiesce_counter, then begin draining the parents,
and then call bdrv_drain_invoke(). It makes sense to let
bdrv_do_drained_end() unravel this exactly in reverse.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drv_co_block_status digs bs->file for additional, more accurate search
for hole inside region, reported as DATA by bs since 5daa74a6eb.
This accuracy is not free: assume we have qcow2 disk. Actually, qcow2
knows, where are holes and where is data. But every block_status
request calls lseek additionally. Assume a big disk, full of
data, in any iterative copying block job (or img convert) we'll call
lseek(HOLE) on every iteration, and each of these lseeks will have to
iterate through all metadata up to the end of file. It's obviously
ineffective behavior. And for many scenarios we don't need this lseek
at all.
However, lseek is needed when we have metadata-preallocated image.
So, let's detect metadata-preallocation case and don't dig qcow2's
protocol file in other cases.
The idea is to compare allocation size in POV of filesystem with
allocations size in POV of Qcow2 (by refcounts). If allocation in fs is
significantly lower, consider it as metadata-preallocation case.
102 iotest changed, as our detector can't detect shrinked file as
metadata-preallocation, which don't seem to be wrong, as with metadata
preallocation we always have valid file length.
Two other iotests have a slight change in their QMP output sequence:
Active 'block-commit' returns earlier because the job coroutine yields
earlier on a blocking operation. This operation is loading the refcount
blocks in qcow2_detect_metadata_preallocation().
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add new optional parameter making possible to merge bitmaps from
different nodes. It is needed to maintain external snapshots during
incremental backup chain history.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190517152111.206494-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Valgrind detects multiple issues in QEMU iotests when the memory is
used without being initialized. Valgrind may dump lots of unnecessary
reports what makes the memory issue analysis harder. Particularly,
that is true for the aligned bitmap directory and can be seen while
running the iotest #169. Padding the aligned space with zeros eases
the pain.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-id: 1558961521-131620-1-git-send-email-andrey.shinkevich@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
If COW areas of the newly allocated clusters are zeroes on the backing
image, efficient bdrv_write_zeroes(flags=BDRV_REQ_NO_FALLBACK) can be
used on the whole cluster instead of writing explicit zero buffers later
in perform_cow().
iotest 060:
write to the discarded cluster does not trigger COW anymore.
Use a backing image instead.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Message-id: 20190516142749.81019-2-anton.nefedov@virtuozzo.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
A consequence of the previous patch is that bdrv_attach_child()
transfers the reference to child_bs from the caller to parent_bs,
which will drop it on bdrv_close() or when someone calls
bdrv_unref_child().
But this only happens when bdrv_attach_child() succeeds. If it fails
then the caller is responsible for dropping the reference to child_bs.
This patch makes bdrv_attach_child() take the reference also when
there is an error, freeing the caller for having to do it.
A similar situation happens with bdrv_root_attach_child(), so the
changes on this patch affect both functions.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 20dfb3d9ccec559cdd1a9690146abad5d204a186.1557754872.git.berto@igalia.com
[mreitz: Removed now superfluous BdrvChild * variable in
bdrv_open_child()]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Split out cluster_size calculation. Move copy-bitmap creation above
block-job creation, as we are going to share it with upcoming
backup-top filter, which also should be created before actual block job
creation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190429090842.57910-6-vsementsov@virtuozzo.com
[mreitz: Dropped a paragraph from the commit message that was left over
from a previous version]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Do full, top and incremental mode copying all in one place. This
unifies the code path and helps further improvements.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190429090842.57910-5-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Split allocation checking to separate function and reduce nesting.
Consider bdrv_is_allocated() fail as allocated area, as copying more
than needed is not wrong (and we do it anyway) and seems better than
fail the whole job. And, most probably we will fail on the next read,
if there are real problem with source.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190429090842.57910-4-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to share this bitmap between backup and backup-top filter
driver, so let's share something more meaningful. It also simplifies
some calculations.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190429090842.57910-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Simplify backup_incremental_init_copy_bitmap using the function
bdrv_dirty_bitmap_next_dirty_area.
Note: move to job->len instead of bitmap size: it should not matter but
less code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190429090842.57910-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Do encryption/decryption in threads, like it is already done for
compression. This improves asynchronous encrypted io.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190506142741.41731-9-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Encryption will be done in threads, to take benefit of it, we should
move it out of the lock first.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190506142741.41731-8-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Background: decryption will be done in threads, to take benefit of it,
we should move it out of the lock first.
But let's go further: it turns out, that only
qcow2_get_cluster_offset() needs locking, so reduce locking to it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190506142741.41731-7-vsementsov@virtuozzo.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Move generic part out of qcow2_co_do_compress, to reuse it for
encryption and rename things that would be shared with encryption path.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190506142741.41731-6-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Drop dependence on AioContext lock.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190506142741.41731-5-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use thread_pool_submit_co, instead of reinventing it here. Note, that
thread_pool_submit_aio() never returns NULL, so checking it was an
extra thing.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190506142741.41731-4-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Move compression-on-threads to separate file. Encryption will be in it
too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190506142741.41731-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
qcow2.h depends on block_int.h. Compilation isn't broken currently only
due to block_int.h always included before qcow2.h. Though, it seems
better to directly include block_int.h in qcow2.h.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190506142741.41731-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, qemu crashes whenever someone queries the block status of an
unaligned image tail of an O_DIRECT image:
$ echo > foo
$ qemu-img map --image-opts driver=file,filename=foo,cache.direct=on
Offset Length Mapped to File
qemu-img: block/io.c:2093: bdrv_co_block_status: Assertion `*pnum &&
QEMU_IS_ALIGNED(*pnum, align) && align > offset - aligned_offset'
failed.
This is because bdrv_co_block_status() checks that the result returned
by the driver's implementation is aligned to the request_alignment, but
file-posix can fail to do so, which is actually mentioned in a comment
there: "[...] possibly including a partial sector at EOF".
Fix this by rounding up those partial sectors.
There are two possible alternative fixes:
(1) We could refuse to open unaligned image files with O_DIRECT
altogether. That sounds reasonable until you realize that qcow2
does necessarily not fill up its metadata clusters, and that nobody
runs qemu-img create with O_DIRECT. Therefore, unpreallocated qcow2
files usually have an unaligned image tail.
(2) bdrv_co_block_status() could ignore unaligned tails. It actually
throws away everything past the EOF already, so that sounds
reasonable.
Unfortunately, the block layer knows file lengths only with a
granularity of BDRV_SECTOR_SIZE, so bdrv_co_block_status() usually
would have to guess whether its file length information is inexact
or whether the driver is broken.
Fixing what raw_co_block_status() returns is the safest thing to do.
There seems to be no other block driver that sets request_alignment and
does not make sure that it always returns aligned values.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block jobs require that all of the nodes the job is using are in the
same AioContext. Therefore all BdrvChild objects of the job propagate
.(can_)set_aio_context to all other job nodes, so that the switch is
checked and performed consistently even if both nodes are in different
subtrees.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some users (like block jobs) can tolerate an AioContext change for their
BlockBackend. Add a function that tells the BlockBackend that it can
allow changes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_try_set_aio_context() currently fails if a BlockBackend is attached
to a node because it doesn't implement the BdrvChildRole callbacks for
AioContext management.
We can allow changing the AioContext of monitor-owned BlockBackends as
long as no device is attached to them.
When setting the AioContext of the root node of a BlockBackend, we now
need to pass blk->root as an ignored child because we don't want the
root node to recursively call back into BlockBackend and execute
blk_do_set_aio_context() a second time.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are a few places in which we turn a number of bytes into sectors
in order to compare the result against BDRV_REQUEST_MAX_SECTORS
instead of using BDRV_REQUEST_MAX_BYTES directly.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When an L2 table entry points to a compressed cluster the space used
by the data is specified in 512-byte sectors. This size is independent
from BDRV_SECTOR_SIZE and is specific to the qcow2 file format.
The QCOW2_COMPRESSED_SECTOR_SIZE constant defined in this patch makes
this explicit.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
