MX PIC comes out of reset with IRQ routing registers set to 0, thus
not delivering any external IRQ to any connected CPU by default.
Fix the model to match the hardware.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Create clock input for the xtensa CPU device and initialize its
frequency to the default core frequency specified in the config.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This is the core used in e.g. ESP8266 chips. Importing them
using import_core.sh, with the required files sourced from
https://github.com/espressif/xtensa-overlays
core-lx106.c was generated by the script; the only change is removing
the reference to core-matmap.h which doesn't seem to be available.
Signed-off-by: Simon Safar <simon@simonsafar.com>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20220423040835.29254-1-simon@simonsafar.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- gen_jumpi passes target PC to the helper;
- gen_callw_slot uses callinc (1..3);
- gen_brcondi passes immediate field (less than 32 different possible
values) to the helper;
- disas_xtensa_insn passes PC to the helpers;
- translate_entry passes PC, stack register number (0..15) and stack
frame size to the helper;
- gen_check_exclusive passes PC and boolean flag to the helper;
- test_exceptions_retw passes PC to the helper;
- gen_check_atomctl passes PC to the helper;
- translate_ssai passes immediate shift amount (0..31) to the helper;
- gen_waiti passes next PC and an immediate (0..15) to the helper;
use tcg_constant_* for the constants listed above. Fold gen_waiti body
into the translate_waiti as it's the only user.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
FPU conversion opcodes pass scale (range 0..15) and rounding mode to
their helpers. Use tcg_constant_* for them.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Numbered special registers are small arrays of consecutive SRs. Use
tcg_constant_* for the SR index.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
dtlb is a boolean flag, use tcg_constant_* for it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use tcg_contant_* for exception number, exception cause, debug cause
code and exception PC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Replace tcg_const_* for numeric literals with tcg_constant_*.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
pc and w are allocated with tcg_const_i32 but not freed in
gen_window_check. Use tcg_constant_i32 for them both.
Fixes: 2db59a76c4 ("target-xtensa: record available window in TB flags")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Rename VFIOGuestIOMMU iommu field into iommu_mr. Then it becomes clearer
it is an IOMMU memory region.
no functional change intended
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20220502094223.36384-4-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Using a VFIODevice handle local variable to improve the code readability.
no functional change intended
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20220502094223.36384-3-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
"%m" format specifier is not interpreted by the trace infrastructure
and thus "%m" is output instead of the actual errno string. Fix it by
outputting strerror(errno).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20220502094223.36384-2-yi.l.liu@intel.com
[aw: replace commit log as provided by Eric]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The CRB command buffer currently is a RAM MemoryRegion and given
its base address alignment, it causes an error report on
vfio_listener_region_add(). This region could have been a RAM device
region, easing the detection of such safe situation but this option
was not well received. So let's add a helper function that uses the
memory region owner type to detect the situation is safe wrt
the assignment. Other device types can be checked here if such kind
of problem occurs again.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20220506132510.1847942-3-eric.auger@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In a subsequent patch, VFIO will need to recognize if
a memory region owner is a TPM CRB device. Hence VFIO
needs to use TPM_IS_CRB() even if CONFIG_TPM is unset. So
let's add a stub function.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linnux.ibm.com>
Link: https://lore.kernel.org/r/20220506132510.1847942-2-eric.auger@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
It uses [offset, offset + size - 1] to indicate that the length of range is
size in most places in vfio trace code (such as
trace_vfio_region_region_mmap()) execpt trace_vfio_region_sparse_mmap_entry().
So change it for trace_vfio_region_sparse_mmap_entry(), but if size is zero,
the trace will be weird with an underflow, so move the trace and trace it
only if size is not zero.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1650100104-130737-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In migration resume phase, all unmasked msix vectors need to be
setup when loading the VF state. However, the setup operation would
take longer if the VM has more VFs and each VF has more unmasked
vectors.
The hot spot is kvm_irqchip_commit_routes, it'll scan and update
all irqfds that are already assigned each invocation, so more
vectors means need more time to process them.
vfio_pci_load_config
vfio_msix_enable
msix_set_vector_notifiers
for (vector = 0; vector < dev->msix_entries_nr; vector++) {
vfio_msix_vector_do_use
vfio_add_kvm_msi_virq
kvm_irqchip_commit_routes <-- expensive
}
We can reduce the cost by only committing once outside the loop.
The routes are cached in kvm_state, we commit them first and then
bind irqfd for each vector.
The test VM has 128 vcpus and 8 VF (each one has 65 vectors),
we measure the cost of the vfio_msix_enable for each VF, and
we can see 90+% costs can be reduce.
VF Count of irqfds[*] Original With this patch
1st 65 8 2
2nd 130 15 2
3rd 195 22 2
4th 260 24 3
5th 325 36 2
6th 390 44 3
7th 455 51 3
8th 520 58 4
Total 258ms 21ms
[*] Count of irqfds
How many irqfds that already assigned and need to process in this
round.
The optimization can be applied to msi type too.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220326060226.1892-6-longpeng2@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Commit ecebe53fe9 ("vfio: Avoid disabling and enabling vectors
repeatedly in VFIO migration") avoids inefficiently disabling and
enabling vectors repeatedly and lets the unmasked vectors be enabled
one by one.
But we want to batch multiple routes and defer the commit, and only
commit once outside the loop of setting vector notifiers, so we
cannot enable the vectors one by one in the loop now.
Revert that commit and we will take another way in the next patch,
it can not only avoid disabling/enabling vectors repeatedly, but
also satisfy our requirement of defer to commit.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220326060226.1892-5-longpeng2@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
It's unnecessary to test against the specific return value of
VFIO_DEVICE_SET_IRQS, since any positive return is an error
indicating the number of vectors we should retry with.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Link: https://lore.kernel.org/r/20220326060226.1892-2-longpeng2@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The star of the show in this PR is the 'Remove hidden usages of *env'
work done by Víctor, which impacts a lot of target/ppc code and we want
to get it landed ASAP so future target/ppc contributions can be based on
it.
Other changes:
- XIVE fixes in guest interrupt handling
- BookE debug interrupt fix
- vhost-user TARGET_PPC64 macro fix
- valgrind fixes in kvmppc functions
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYnQbpgAKCRA82cqW3gMx
ZM1ZAQChjU/oBVDlhrlfInGjOcdXlM4l0R0pDQZ6dm1NYVqcvgD/WRNWj+tQ2H1V
xmKXSzrGlDyYFu1uozfU8kvYJeHaKgw=
=eRrg
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220505' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2022-05-05:
The star of the show in this PR is the 'Remove hidden usages of *env'
work done by Víctor, which impacts a lot of target/ppc code and we want
to get it landed ASAP so future target/ppc contributions can be based on
it.
Other changes:
- XIVE fixes in guest interrupt handling
- BookE debug interrupt fix
- vhost-user TARGET_PPC64 macro fix
- valgrind fixes in kvmppc functions
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCYnQbpgAKCRA82cqW3gMx
# ZM1ZAQChjU/oBVDlhrlfInGjOcdXlM4l0R0pDQZ6dm1NYVqcvgD/WRNWj+tQ2H1V
# xmKXSzrGlDyYFu1uozfU8kvYJeHaKgw=
# =eRrg
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 05 May 2022 01:47:02 PM CDT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20220505' of https://gitlab.com/danielhb/qemu: (30 commits)
target/ppc: Change MSR_* to follow POWER ISA numbering convention
target/ppc: Add unused msr bits FIELDs
target/ppc: Remove msr_de macro
target/ppc: Remove msr_hv macro
target/ppc: Remove msr_ts macro
target/ppc: Remove msr_fe0 and msr_fe1 macros
target/ppc: Remove msr_ep macro
target/ppc: Remove msr_dr macro
target/ppc: Remove msr_ir macro
target/ppc: Remove msr_cm macro
target/ppc: Remove msr_fp macro
target/ppc: Remove msr_gs macro
target/ppc: Remove msr_me macro
target/ppc: Remove msr_pow macro
target/ppc: Remove msr_ce macro
target/ppc: Remove msr_ee macro
target/ppc: Remove msr_ile macro
target/ppc: Remove msr_ds macro
target/ppc: Remove msr_le macro
target/ppc: Remove msr_pr macro
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Today we have the issue where MSR_* values are the 'inverted order'
bit numbers from what the ISA specifies. e.g. MSR_LE is bit 63 but
is defined as 0 in QEMU.
Add a macro to be used to convert from QEMU order to ISA order.
This solution requires less changes than to use the already defined
PPC_BIT macro, which would turn MSR_* in masks instead of the numbers
itself.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-23-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add FIELDs macros for msr bits that had an unused msr_* before.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-22-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_de macro hides the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-21-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_hv macro hides the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-20-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ts macro hides the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-19-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_fe0 and msr_fe1 macros hide the usage of env->msr, which is a bad
behavior. Substitute it with FIELD_EX64 calls that explicitly use
env->msr as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-18-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ep macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-17-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_dr macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-16-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ir macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-15-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_cm macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-14-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_fp macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-13-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_gs macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-12-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_me macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-11-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_pow macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-10-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ce macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-9-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ee macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-8-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ile macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-7-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_ds macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-6-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_le macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-5-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
msr_pr macro hides the usage of env->msr, which is a bad behavior
Substitute it with FIELD_EX64 calls that explicitly use env->msr
as a parameter.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220504210541.115256-4-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some msr_* macros are not used anywhere. Remove them as part of
the work to remove all hidden usage of *env.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220504210541.115256-3-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
fpscr_* defined macros are hiding the usage of *env behind them.
Substitute the usage of these macros with `env->fpscr & FP_*` to make
the code cleaner.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Message-Id: <20220504210541.115256-2-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When pulling or pushing an OS context from/to a CPU, we should
re-evaluate the state of the External interrupt signal. Otherwise, we
can end up catching the External interrupt exception in hypervisor
mode, which is unexpected.
The problem is best illustrated with the following scenario:
1. an External interrupt is raised while the guest is on the CPU.
2. before the guest can ack the External interrupt, an hypervisor
interrupt is raised, for example the Hypervisor Decrementer or
Hypervisor Virtualization interrupt. The hypervisor interrupt forces
the guest to exit while the External interrupt is still pending.
3. the hypervisor handles the hypervisor interrupt. At this point, the
External interrupt is still pending. So it's very likely to be
delivered while the hypervisor is running. That's unexpected and can
result in an infinite loop where the hypervisor catches the External
interrupt, looks for an interrupt in its hypervisor queue, doesn't
find any, exits the interrupt handler with the External interrupt
still raised, repeat...
The fix is simply to always lower the External interrupt signal when
pulling an OS context. It means it needs to be raised again when
re-pushing the OS context. Fortunately, it's already the case, as we
now always call xive_tctx_ipb_update(), which will raise the signal if
needed.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220429071620.177142-3-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The Post Interrupt Priority Register (PIPR) is not restored like the
other OS-context related fields of the TIMA when pushing an OS context
on the CPU. It's not needed because it can be calculated from the
Interrupt Pending Buffer (IPB), which is saved and restored. The PIPR
must therefore always be recomputed when pushing an OS context.
This patch fixes a path on P9 and P10 where it was not done. If there
was a pending interrupt when the OS context was pulled, the IPB was
saved correctly. When pushing back the context, the code in
xive_tctx_need_resend() was checking for a interrupt raised while the
context was not on the CPU, saved in the NVT. If one was found, then
it was merged with the saved IPB and the PIPR updated and everything
was fine. However, if there was no interrupt found in the NVT, then
xive_tctx_ipb_update() was not being called and the PIPR was not
updated. This patch fixes it by always calling xive_tctx_ipb_update().
Note that on P10 (xive2.c) and because of the above, there's no longer
any need to check the CPPR value so it can go away.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220429071620.177142-2-fbarrat@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The correct name of the macro is TARGET_PPC64.
Fixes: 27598393a2 ("Lift max memory slots limit imposed by vhost-user")
Reported-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Cc: Raphael Norwitz <raphael.norwitz@nutanix.com>
Cc: Peter Turschmid <peter.turschm@nutanix.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20220503180108.34506-1-muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Per E500 core reference manual [1], chapter 8.4.4 "Branch Taken Debug
Event" and chapter 8.4.5 "Instruction Complete Debug Event":
"A branch taken debug event occurs if both MSR[DE] and DBCR0[BRT]
are set ... Branch taken debug events are not recognized if MSR[DE]
is cleared when the branch instruction executes."
"An instruction complete debug event occurs when any instruction
completes execution so long as MSR[DE] and DBCR0[ICMP] are both
set ... Instruction complete debug events are not recognized if
MSR[DE] is cleared at the time of the instruction execution."
Current codes do not check MSR.DE bit before setting HFLAGS_SE and
HFLAGS_BE flag, which would cause the immediate debug interrupt to
be generated, e.g.: when DBCR0.ICMP bit is set by guest software
and MSR.DE is not set.
[1] https://www.nxp.com/docs/en/reference-manual/E500CORERM.pdf
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br>
Message-Id: <20220421011729.1148727-1-bmeng.cn@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Init the struct to avoid Valgrind complaints about unitialized bytes,
such as this one:
==39549== Syscall param ioctl(generic) points to uninitialised byte(s)
==39549== at 0x55864E4: ioctl (in /usr/lib64/libc.so.6)
==39549== by 0xD1F7EF: kvm_vm_ioctl (kvm-all.c:3035)
==39549== by 0xAF8F5B: kvm_get_radix_page_info (kvm.c:276)
==39549== by 0xB00533: kvmppc_host_cpu_class_init (kvm.c:2369)
==39549== by 0xD3DCE7: type_initialize (object.c:366)
==39549== by 0xD3FACF: object_class_foreach_tramp (object.c:1071)
==39549== by 0x502757B: g_hash_table_foreach (in /usr/lib64/libglib-2.0.so.0.7000.5)
==39549== by 0xD3FC1B: object_class_foreach (object.c:1093)
==39549== by 0xB0141F: kvm_ppc_register_host_cpu_type (kvm.c:2613)
==39549== by 0xAF87E7: kvm_arch_init (kvm.c:157)
==39549== by 0xD1E2A7: kvm_init (kvm-all.c:2595)
==39549== by 0x8E6E93: accel_init_machine (accel-softmmu.c:39)
==39549== Address 0x1fff00e208 is on thread 1's stack
==39549== in frame #2, created by kvm_get_radix_page_info (kvm.c:267)
==39549== Uninitialised value was created by a stack allocation
==39549== at 0xAF8EE8: kvm_get_radix_page_info (kvm.c:267)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220331001717.616938-5-danielhb413@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
