- Use spaces instead of tabs on cpu_x86_cpuid().
- Use braces on 'if' statement cpu_x86_find_by_name().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
SSSE3 support has been added to TCG more than 4 years ago in commit
4242b1bd8a. It has been disabled by
mistake in commit 551a2dec8f.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
When adding the Haswell CPU model, I intended to make it a superset of the
features present on the SandyBridge model, but I have removed the SEP and
RDTSCP features from the feature list by mistake. This patch adds the
missing SEP and RDTSCP features (that are present on SandyBridge) to
Haswell.
Reported-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* afaerber/qom-cpu:
target-i386: Add Haswell CPU model
target-i386/cpu: Add new Opteron CPU model
target-i386/cpu: Name new CPUID bits
qapi-types.h: Don't include qemu-common.h
osdep: Move qemu_{open,close}() prototypes
qemu-config.h: Include headers it needs
vnc-palette.h: Include <stdbool.h>
qemu-fsdev-dummy.c: Include module.h
qdev: Split up header so it can be used in cpu.h
Move qemu_irq typedef out of qemu-common.h
qemu-common.h: Comment about usage rules
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a new base CPU model called Opteron_G5 to model the latest
Opteron CPUs. This increases the model value and model numbers and
adds TBM, F16C and FMA over the latest G4 model.
Signed-off-by: Andre Przywara <osp@andrep.de>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
[ehabkost: edited commit message]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Update QEMU's knowledge of CPUID bit names. This allows to
enable/disable those new features on QEMU's command line when
using KVM and prepares future feature enablement in QEMU.
This adds F16C, RDRAND, LWP, TBM, TopoExt, PerfCtr_Core, PerfCtr_NB,
FSGSBASE, BMI1, AVX2, BMI2, ERMS, PCID, InvPCID, RTM, RDSeed and ADX.
Sources where the AMD BKDG for Family 15h/Model 10h, Intel Software
Developer Manual, and the Linux kernel for the leaf 7 bits.
Signed-off-by: Andre Przywara <osp@andrep.de>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
[ehabkost: added CPUID_EXT_PCID]
[ehabkost: edited commit message]
[ehabkost: rebased against latest qemu.git master]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
This fixes the following:
target-i386/cpu.o: In function `kvm_cpu_fill_host':
target-i386/cpu.c:783: undefined reference to `kvm_state'
I didn't notice the problem before because GCC was optimizing the entire
kvm_cpu_fill_host() function out (because all calls are conditional on
kvm_enabled()).
* cpu_x86_fill_model_id() is used only if CONFIG_KVM is set, so #ifdef it
entirely to avoid compiler warnings.
* kvm_cpu_fill_host() should be called only if KVM is enabled, so
use #ifdef CONFIG_KVM around the entire function body.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* qemu-kvm/uq/master: (28 commits)
update-linux-headers.sh: Handle new kernel uapi/ directories
target-i386: kvm_cpu_fill_host: use GET_SUPPORTED_CPUID
target-i386: cpu: make -cpu host/check/enforce code KVM-specific
target-i386: make cpu_x86_fill_host() void
Emulate qemu-kvms -no-kvm option
Issue warning when deprecated -tdf option is used
Issue warning when deprecated drive parameter boot=on|off is used
Use global properties to emulate -no-kvm-pit-reinjection
Issue warning when deprecated -no-kvm-pit is used
Use machine options to emulate -no-kvm-irqchip
cirrus_vga: allow configurable vram size
target-i386: Add missing kvm cpuid feature name
i386: cpu: add missing CPUID[EAX=7,ECX=0] flag names
i386: kvm: filter CPUID leaf 7 based on GET_SUPPORTED_CPUID, too
i386: kvm: reformat filter_features_for_kvm() code
i386: kvm: filter CPUID feature words earlier, on cpu.c
i386: kvm: mask cpuid_ext4_features bits earlier
i386: kvm: mask cpuid_kvm_features earlier
i386: kvm: x2apic is not supported without in-kernel irqchip
i386: kvm: set CPUID_EXT_TSC_DEADLINE_TIMER on kvm_arch_get_supported_cpuid()
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For target-mips also change the return type to bool.
Make include paths for cpu-qom.h consistent for alpha and unicore32.
Signed-off-by: Andreas Färber <afaerber@suse.de>
[AF: Updated new target-openrisc function accordingly]
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
Change the kvm_cpu_fill_host() function to use
kvm_arch_get_supported_cpuid() instead of running the CPUID instruction
directly, when checking for supported CPUID features.
This should solve two problems at the same time:
* "-cpu host" was not enabling features that don't need support on
the host CPU (e.g. x2apic);
* "check" and "enforce" options were not detecting problems when the
host CPU did support a feature, but the KVM kernel code didn't
support it.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Rationale:
* "-cpu host" is available only when using KVM
* The current implementation of -cpu check/enforce
(check_features_against_host()) makes sense only when using KVM.
So this makes the functions check_features_against_host() and
cpu_x86_fill_host() KVM-specific, document them as such, and rename them
to kvm_check_features_against_host() and kvm_cpu_fill_host().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The return value of that function is always 0, and is always ignored.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Currently "-cpu host,-kvmclock,-kvm_nopiodelay,-kvm_mmu" does not
turn off all bits in CPUID 0x40000001 EAX.
The missing ones is KVM_FEATURE_STEAL_TIME.
This adds the name kvm_steal_time.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Now that CPUID leaf 7 features can be enabled/disabled on the
command-line, we need to filter them properly using GET_SUPPORTED_CPUID,
at the same place where other features are filtered out.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Cosmetic, but it will also help to make futher patches easier to review.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
cpu.c contains the code that will check if all requested CPU features
are available, so the filtering of KVM features must be there, so we can
implement "check" and "enforce" properly.
The only point where kvm_arch_init_vcpu() is called on i386 is:
- cpu_x86_init()
- x86_cpu_realize() (after cpu_x86_register() is called)
- qemu_init_vcpu()
- qemu_kvm_start_vcpu()
- qemu_kvm_thread_fn() (on a new thread)
- kvm_init_vcpu()
- kvm_arch_init_vcpu()
With this patch, the filtering will be done earlier, at:
- cpu_x86_init()
- cpu_x86_register() (before x86_cpu_realize() is called)
Also, the KVM CPUID filtering will now be done at the same place where
the TCG CPUID feature filtering is done. Later, the code can be changed
to use the same filtering code for the "check" and "enforce" modes, as
now the cpu.c code knows exactly which CPU features are going to be
exposed to the guest (and much earlier).
One thing I was worrying about when doing this is that
kvm_arch_get_supported_cpuid() depends on kvm_irqchip_in_kernel(), and
maybe the 'kvm_kernel_irqchip' global variable wasn't initialized yet at
CPU creation time. But kvm_kernel_irqchip is initialized during
kvm_init(), that is called very early (much earlier than the machine
init function), and kvm_init() is already a requirement to run the
GET_SUPPORTED_CPUID ioctl() (as kvm_init() initializes the kvm_state
global variable).
Side note: it would be nice to keep KVM-specific code inside kvm.c. The
problem is that properly implementing -cpu check/enforce code (that's
inside cpu.c) depends directly on the feature bit filtering done using
kvm_arch_get_supported_cpuid(). Currently -cpu check/enforce is broken
because it simply uses the host CPU feature bits instead of
GET_SUPPORTED_CPUID, and we need to fix that.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This way all the filtering by GET_SUPPORTED_CPUID is being done at the
same place in the code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of masking the KVM feature bits very late (while building the
KVM_SET_CPUID2 data), mask it out on env->cpuid_kvm_features, at the
same point where the other feature words are masked out.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This is necessary so that x2apic is not improperly enabled when the
in-kernel irqchip is disabled.
This won't generate a warning with "-cpu ...,check" because the current
check/enforce code is broken (it checks the host CPU data directly,
instead of using kvm_arch_get_supported_cpuid()), but it will be
eventually fixed to properly report the missing x2apic flag.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This moves the CPUID_EXT_TSC_DEADLINE_TIMER CPUID flag hacking from
kvm_arch_init_vcpu() to kvm_arch_get_supported_cpuid().
Full git grep for kvm_arch_get_supported_cpuid:
kvm.h:uint32_t kvm_arch_get_supported_cpuid(KVMState *env, uint32_t function,
target-i386/cpu.c: x86_cpu_def->cpuid_7_0_ebx_features = kvm_arch_get_supported_cpuid(kvm_state, 0x7, 0, R_EBX);
target-i386/cpu.c: *eax = kvm_arch_get_supported_cpuid(s, 0xA, count, R_EAX);
target-i386/cpu.c: *ebx = kvm_arch_get_supported_cpuid(s, 0xA, count, R_EBX);
target-i386/cpu.c: *ecx = kvm_arch_get_supported_cpuid(s, 0xA, count, R_ECX);
target-i386/cpu.c: *edx = kvm_arch_get_supported_cpuid(s, 0xA, count, R_EDX);
target-i386/cpu.c: *eax = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EAX);
target-i386/cpu.c: *ebx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EBX);
target-i386/cpu.c: *ecx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_ECX);
target-i386/cpu.c: *edx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EDX);
target-i386/kvm.c:uint32_t kvm_arch_get_supported_cpuid(KVMState *s, uint32_t function,
target-i386/kvm.c: cpuid_1_edx = kvm_arch_get_supported_cpuid(s, 1, 0, R_EDX);
target-i386/kvm.c: env->cpuid_features &= kvm_arch_get_supported_cpuid(s, 1, 0, R_EDX);
* target-i386/kvm.c: env->cpuid_ext_features &= kvm_arch_get_supported_cpuid(s, 1, 0, R_ECX);
target-i386/kvm.c: env->cpuid_ext2_features &= kvm_arch_get_supported_cpuid(s, 0x80000001,
target-i386/kvm.c: env->cpuid_ext3_features &= kvm_arch_get_supported_cpuid(s, 0x80000001,
target-i386/kvm.c: env->cpuid_svm_features &= kvm_arch_get_supported_cpuid(s, 0x8000000A,
target-i386/kvm.c: kvm_arch_get_supported_cpuid(s, KVM_CPUID_FEATURES, 0, R_EAX);
target-i386/kvm.c: kvm_arch_get_supported_cpuid(s, 0xC0000001, 0, R_EDX);
Note that there is only one call for CPUID[1].ECX above (*), and it is
the one that gets hacked to include CPUID_EXT_TSC_DEADLINE_TIMER, so we
can simply make kvm_arch_get_supported_cpuid() set it, to let the rest
of the code know the flag can be safely set by QEMU.
One thing I was worrying about when doing this is that now
kvm_arch_get_supported_cpuid() depends on kvm_irqchip_in_kernel(). But
the 'kvm_kernel_irqchip' global variable is initialized during
kvm_init(), that is called very early, and kvm_init() is already a
requirement to run the GET_SUPPORTED_CPUID ioctl() (as kvm_init() is the
function that initializes the 'kvm_state' global variable).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Additional fixups will be added, and making them a single 'if/else if'
chain makes it clearer than two nested switch statements.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The reg switch will be moved to a separate function, so store the entry
pointer in a variable.
No behavior change, just code movement.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of a function-specific has_kvm_features variable, simply use a
"found" variable that will be checked in case we have to use the legacy
get_para_features() interface.
No behavior change, just code cleanup.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The for loop will become a separate function, so clean it up so it can
become independent from the bit hacking for R_EDX.
No behavior change[1], just code movement.
[1] Well, only if the kernel returned CPUID leafs 1 or 0x80000001 as
unsupported, but there's no kernel version that does that.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Change return type to bool, move to include/qemu/cpu.h and
add documentation.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
[AF: Updated new caller qemu_in_vcpu_thread()]
Simplifies the call in apic_sipi() again and needed for moving halted
field to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Prepares for using a link<> property to connect APIC with CPU and for
changing the CPU APIs to CPUState.
Resolve Coding Style warnings by moving the closing parenthesis of
foreach_apic() macro to next line.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This prepares for changing the variable type from void*.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
(L)APIC is a part of cpu [1] so move APIC initialization inside of
x86_cpu object. Since cpu_model and override flags currently specify
whether APIC should be created or not, APIC creation&initialization is
moved into x86_cpu_apic_init() which is called from x86_cpu_realize().
[1] - all x86 cpus have integrated APIC if we overlook existence of i486,
and it's more convenient to model after majority of them.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Enable KVM PV EOI by default. You can still disable it with
-kvm_pv_eoi cpu flag. To avoid breaking cross-version migration,
enable only for qemu 1.3 (or in the future, newer) machine type.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I removed a line by mistake on commit
3b671a40ca, containing the flags lm/i64,
3dnow, and 3dnowext. This patch restores the removed line.
Reviewed-by: Don Slutz <Don@cloudswitch.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
