Until now we used only the agent to change the monitor count and each
monitor resolution. This patch introduces the qemu part of using the
device as the mediator instead of the agent via virtio-serial.
Spice (>=0.11.5) calls the new QXLInterface::client_monitors_config,
which returns wether the interrupt is enabled, and if so and given a non
NULL monitors config will
generate an interrupt QXL_INTERRUPT_CLIENT_MONITORS_CONFIG with crc
checksum for the guest to verify a second call hasn't interfered.
The maximal number of monitors is limited on the QXLRom to 64.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add two new trace events:
qxl_send_events(int qid, uint32_t events) "%d %d"
qxl_set_guest_bug(int qid) "%d"
Change qxl_io_unexpected_vga_mode parameters to be equivalent to those
of qxl_io_write for easier grouping under a single systemtap probe.
Change d to qxl in one place.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add back a call to qxl_spice_destroy_surface_wait_complete() in qxl_spice_destroy_surface_wait(),
that was removed by commit c480bb7da4
It is needed to complete surface-removal cleanup, for non async.
For async, qxl_spice_destroy_surface_wait_complete is called upon operation completion.
Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The recent introduction of set_client_capabilities has broken
(seamless) migration by trying to call qxl_send_events pre (seamless
incoming) and post (*) migration, triggering the following assert:
qxl_send_events: Assertion `qemu_spice_display_is_running(&d->ssd)' failed.
The solution is easy, pre migration the guest will have already received
the client caps on the migration source side, and post migration there no
longer is a guest, so we can simply ignore the set_client_capabilities call
in both those scenarios.
*) Post migration, so not fatal for to the migration itself, but still a crash
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In preparation of stopping to flush coalesced MMIO unconditionally on
vmexits, mark VGA MMIO and PIO regions as synchronous /wrt coalesced
MMIO and flush the buffer explicitly on PIO accesses that do not use
generic memory regions yet.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* 'spice.v59' of git://anongit.freedesktop.org/spice/qemu:
Remove #ifdef QXL_COMMAND_FLAG_COMPAT_16BPP
qxl: Add set_client_capabilities() interface to QXLInterface
spice: make number of surfaces runtime-configurable.
configure: print spice-protocol and spice-server versions
qxl: add QXL_IO_MONITORS_CONFIG_ASYNC
qxl: disallow unknown revisions
qxl/update_area_io: guest_bug on invalid parameters
spice: increase the verbosity of spice section in "qemu --help"
spice: adding seamless-migration option to the command line
spice: add 'migrated' flag to spice info
spice migration: add QEVENT_SPICE_MIGRATE_COMPLETED
spice: notify on vm state change only via spice_server_vm_start/stop
spice: notify spice server on vm start/stop
spice: abort on invalid streaming cmdline params
All devices that register a screen dump callback via
graphic_console_init() are updated.
The new argument is not used in this commit. Error handling will
be added to each device individually later.
This change is a preparation to convert the screendump command
to the QAPI.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We require spice >= 0.8 now, so this flag is always present.
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This new interface lets spice server inform the guest whether
(a) a client is connected
(b) what capabilities the client has
There is a fixed number (464) of bits reserved for capabilities, and
when the capabilities bits change, the QXL_INTERRUPT_CLIENT interrupt
is generated.
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Revision bumped to 4 for new IO support, enabled for spice-server >=
0.11.1. New io enabled if revision is 4. Revision can be set to 4.
[ kraxel: 3 continues to be the default revision. Once we have a new
stable spice-server release and the qemu patches to enable
the new bits merged we'll go flip the switch and make rev4
the default ]
This io calls the corresponding new spice api
spice_qxl_monitors_config_async to let spice-server read a new guest set
monitors config and notify the client.
On migration reissue spice_qxl_monitors_config_async.
RHBZ: 770842
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
fixup
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Old size: 8 MB (traditional upstream qemu value).
New size: 16 MB (traditional qemu-kvm value).
Also adds compat properties so old machine types
keep the old default values.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In preperation for supporting a larger framebuffer for multiple monitors
on a single card, add a property to qxl vgamem_size_mb, and corresponding
byte sized vgamem_size, and use instead of VGA_RAM_SIZE.
[ kraxel: simplify property handling, add sanity checks ]
[ kraxel: fix mode copying ]
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Zap the global VGA_RAM_SIZE #define, make the vga ram size configurable
for standard vga and vmware vga. cirrus and qxl are left with a fixed
size (and private VGA_RAM_SIZE #define) for now.
qxl needs some non-trivial adjustments in the mode list handling deal
with a runtime-configurable size, which calls for a separate qxl patch.
cirrus emulates cards which have 2 MB (isa) and 4 MB (pci), so I guess
it would make sense to use these sizes. That change would break
migration though, so I left it fixed at 8 MB size. Making it
configurabls is pretty pointless for cirrus as we have to match real
hardware.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
soft_reset is called from any of:
* QXL_IO_RESET
* vga io
* pci reset handler
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested with linux guest. Not sure how to check actual performance affect
of this. Checked with the previously send traceevent that the kvm ioctl
to start/stop dirty logging is being called.
(KVM_SET_USER_MEMORY_REGION).
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
val is an uint64_t, therefore %d was not correct.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The addition of those values caused a regression where not specifying
any value for the vram bar size would result in a 4096 _byte_ surface
area. This is ok for the windows driver but causes the X driver to be
unusable. Also, it's a regression. This patch returns the default
behavior of having a 64 megabyte vram BAR.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix compilation failures on 32 bit hosts (cast from pointer to
integer of different size; %ld expects 'long int' not uint64_t).
Reported-by: Steve Langasek <steve.langasek@canonical.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
dprint is still used for qxl_init_common one time prints.
also switched parts of spice-display.c over, mainly all the callbacks to
spice server.
All qxl device trace events start with the qxl device id.
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If pipe creation fails, exit, don't log and continue. Fix indentation at
the same time.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds an 64bit pci bar for vram. It is turned off by default.
It can be enabled by setting the size of the 64bit bar to be larger than
the 32bit bar. Both 32bit and 64bit bar refer to the same memory. Only
the first part of the memory is available via 32bit bar.
The intention is to allow large vram sizes for 64bit guests, by allowing
the vram bar being mapped above 4G, so we don't have to squeeze it into
the pci I/O window below 4G.
With vram_size_mb=16 and vram64_size_mb=256 it looks like this:
00:02.0 VGA compatible controller: Red Hat, Inc. Device 0100 (rev 02) (prog-if 00 [VGA controller])
Subsystem: Red Hat, Inc Device 1100
Physical Slot: 2
Flags: fast devsel, IRQ 10
Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Memory at fd020000 (32-bit, non-prefetchable) [size=8K]
I/O ports at c5a0 [size=32]
Memory at ffe0000000 (64-bit, prefetchable) [size=256M]
Expansion ROM at fd000000 [disabled] [size=64K]
[ mapping above 4G needs patched seabios:
http://www.kraxel.org/cgit/seabios/commit/?h=pci64 ]
RHBZ# 747011
Removes the last user of QXL_SYNC when using update drivers that use the
_ASYNC io ports.
The last user is qxl_render_update, it is called both by qxl_hw_update
which is the vga_hw_update_ptr passed to graphic_console_init, and by
qxl_hw_screen_dump.
At the same time the QXLRect area being passed to the red_worker thread
is passed as a copy, as part of the QXLCookie.
The implementation uses interface_update_area_complete with a bh to make
sure dpy_update and qxl_flip are called from the io thread, otherwise
the vga->ds->surface.data can change under our feet.
With this patch sdl+spice works fine. But spice by itself doesn't
produce the expected screendumps unless repeated a few times, due to
ppm_save being called before update_area (rendering done in spice server
thread) having a chance to complete. Fixed by next patch, but see commit
message for problem introduced by it.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
drop all ifdefs on SPICE_INTERFACE_QXL_MINOR >= 1 as a result,
any check for SPICE_SERVER_VERSION that is now always satisfied,
and SPICE_INTERFACE_CORE_MINOR >= 3 tests, because
0.8.2 has SPICE_INTERFACE_QXL_MINOR == 1 and
SPICE_INTERFACE_CORE_MINOR == 3.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
switch console only if needed, also pass down whenever the console was
switched or not because a displaysurface redraw is only needed in case
the console was switched.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add two properties to specify bar sizes in megabytes instead of bytes,
which is alot more user-friendly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
