In preparation of finer grained throttling.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1444921716-9511-6-git-send-email-armbru@redhat.com>
In preparation of turning monitor_qapi_event_state[] into a hash table
for finer grained throttling.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1444921716-9511-5-git-send-email-armbru@redhat.com>
We don't actually care for the scale, so we can just as well use the
simpler interface.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1444921716-9511-4-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The event throttling state machine is hard to understand. I'm not
sure it's entirely correct. Rewrite it in a more straightforward
manner:
State 1: No event sent recently (less than evconf->rate ns ago)
Invariant: evstate->timer is not pending, evstate->qdict is null
On event: send event, arm timer, goto state 2
State 2: Event sent recently, no additional event being delayed
Invariant: evstate->timer is pending, evstate->qdict is null
On event: store it in evstate->qdict, goto state 3
On timer: goto state 1
State 3: Event sent recently, additional event being delayed
Invariant: evstate->timer is pending, evstate->qdict is non-null
On event: store it in evstate->qdict, goto state 3
On timer: send evstate->qdict, clear evstate->qdict,
arm timer, goto state 2
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1444921716-9511-3-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Make the variables holding the event QDict instead of QObject.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1444921716-9511-2-git-send-email-armbru@redhat.com>
blk_bs() will not necessarily return a non-NULL value any more (unless
blk_is_available() is true or it can be assumed to otherwise, e.g.
because it is called immediately after a successful blk_new_with_bs() or
blk_new_open()).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
monitor_fprintf and mon_get_cpu will be used in the target-specific monitor,
so it is advisable to make it external.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1442927901-1084-6-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Not only it makes sense, but it gets rid of checkpatch warning:
WARNING: consider using qemu_strtosz in preference to strtosz
Also remove get rid of tabs to please checkpatch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1442419377-9309-1-git-send-email-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qapi/introspect.json defines the introspection schema. It's designed
for QMP introspection, but should do for similar uses, such as QGA.
The introspection schema does not reflect all the rules and
restrictions that apply to QAPI schemata. A valid QAPI schema has an
introspection value conforming to the introspection schema, but the
converse is not true.
Introspection lowers away a number of schema details, and makes
implicit things explicit:
* The built-in types are declared with their JSON type.
All integer types are mapped to 'int', because how many bits we use
internally is an implementation detail. It could be pressed into
external interface service as very approximate range information,
but that's a bad idea. If we need range information, we better do
it properly.
* Implicit type definitions are made explicit, and given
auto-generated names:
- Array types, named by appending "List" to the name of their
element type, like in generated C.
- The enumeration types implicitly defined by simple union types,
named by appending "Kind" to the name of their simple union type,
like in generated C.
- Types that don't occur in generated C. Their names start with ':'
so they don't clash with the user's names.
* All type references are by name.
* The struct and union types are generalized into an object type.
* Base types are flattened.
* Commands take a single argument and return a single result.
Dictionary argument or list result is an implicit type definition.
The empty object type is used when a command takes no arguments or
produces no results.
The argument is always of object type, but the introspection schema
doesn't reflect that.
The 'gen': false directive is omitted as implementation detail.
The 'success-response' directive is omitted as well for now, even
though it's not an implementation detail, because it's not used by
QMP.
* Events carry a single data value.
Implicit type definition and empty object type use, just like for
commands.
The value is of object type, but the introspection schema doesn't
reflect that.
* Types not used by commands or events are omitted.
Indirect use counts as use.
* Optional members have a default, which can only be null right now
Instead of a mandatory "optional" flag, we have an optional default.
No default means mandatory, default null means optional without
default value. Non-null is available for optional with default
(possible future extension).
* Clients should *not* look up types by name, because type names are
not ABI. Look up the command or event you're interested in, then
follow the references.
TODO Should we hide the type names to eliminate the temptation?
New generator scripts/qapi-introspect.py computes an introspection
value for its input, and generates a C variable holding it.
It can generate awfully long lines. Marked TODO.
A new test-qmp-input-visitor test case feeds its result for both
tests/qapi-schema/qapi-schema-test.json and qapi-schema.json to a
QmpInputVisitor to verify it actually conforms to the schema.
New QMP command query-qmp-schema takes its return value from that
variable. Its reply is some 85KiBytes for me right now.
If this turns out to be too much, we have a couple of options:
* We can use shorter names in the JSON. Not the QMP style.
* Optionally return the sub-schema for commands and events given as
arguments.
Right now qmp_query_schema() sends the string literal computed by
qmp-introspect.py. To compute sub-schema at run time, we'd have to
duplicate parts of qapi-introspect.py in C. Unattractive.
* Let clients cache the output of query-qmp-schema.
It changes only on QEMU upgrades, i.e. rarely. Provide a command
query-qmp-schema-hash. Clients can have a cache indexed by hash,
and re-query the schema only when they don't have it cached. Even
simpler: put the hash in the QMP greeting.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
These functions marshal both input and output.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-17-git-send-email-armbru@redhat.com>
This header is non-needed anymore and wont work in multi-arch where
this service is not provided to core code.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <4e96622ab5320603829b6f94b8c4e94d573d34fc.1441614289.git.crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move target-specific code out of /monitor.c to /target-*/monitor.c,
this will avoid code cluttering and using random ifdeffery. The solution
is quite simple, but solves the issue of the separation of target-specific
code from monitor.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For moving target- and device-specific code from monitor.c,
to beginning we move info_cmds content to hmp-commands-info.hx
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-2-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make "info iothreads" available on the HMP monitor.
For example, the results are as follows when executing qemu
command with "-object iothread,id=iothread-1 -object
iothread,id=iothread-2".
(qemu) info iothreads
iothread-1: thread_id=123
iothread-2: thread_id=456
Signed-off-by: Ting Wang <kathy.wangting@huawei.com>
Message-Id: <1435306033-58372-1-git-send-email-kathy.wangting@huawei.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Amos Jianjun Kong <kongjianjun@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add completion for the trace event names in the hmp trace-event
command.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1439548063-18410-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Provide an info skeys hmp sub-command to allow the end user to dump a storage
key for a given address. This is useful for guest operating system developers.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add dump-skeys command to the human monitor.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Provide a dump-skeys qmp command to allow the end user to dump storage
keys. This is useful for debugging problems with guest storage key support
within Qemu and for guest operating system developers.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu_printf is an ancient remnant which has been a simple #define to
printf for over a decade, and is used in only a few places. Expand
it out in those places and remove the #define.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Remove it except for two things in qerror.h:
* Two #include to be cleaned up separately to avoid cluttering this
patch.
* The QERR_ macros. Mark as obsolete.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
The traditional QMP command handler interface
int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data);
doesn't provide for returning an Error object. Instead, the handler
is expected to stash it in the monitor with qerror_report().
When we rebased QMP on top of QAPI, we didn't change this interface.
Instead, commit 776574d introduced "middle mode" as a temporary aid
for converting existing QMP commands to QAPI one by one. More than
three years later, we're still using it.
Middle mode has two effects:
* Instead of the native input marshallers
static void qmp_marshal_input_FOO(QDict *, QObject **, Error **)
it generates input marshallers conforming to the traditional QMP
command handler interface.
* It suppresses generation of code to register them with
qmp_register_command()
This permits giving them internal linkage.
As long as we need qmp-commands.hx, we can't use the registry behind
qmp_register_command(), so the latter has to stay for now.
The former has to go to get rid of qerror_report(). Changing all QMP
commands to fit the QAPI mold in one go was impractical back when we
started, but by now there are just a few stragglers left:
do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(),
qmp_netdev_add(), do_device_add().
Switch middle mode to generate native input marshallers, and adapt the
stragglers. Simplifies both the monitor code and the stragglers.
Rename do_qmp_capabilities() to qmp_capabilities(), and
do_device_add() to qmp_device_add, because that's how QMP command
handlers are named today.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere.
The only remaining user in qemu-option.c is qemu_opts_parse(). Is it
used in QMP context? If not, we can simply replace
qerror_report_err() by error_report_err().
The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are
clearly not in QMP context.
The uses in vl.c aren't either, because the only QMP command handlers
there are qmp_query_status() and qmp_query_machines(), and they don't
call it.
Remaining uses:
* drive_def(): Command line -drive and such, HMP drive_add and pci_add
* hmp_chardev_add(): HMP chardev-add
* monitor_parse_command(): HMP core
* tmp_config_parse(): Command line -tpmdev
* net_host_device_add(): HMP host_net_add
* net_client_parse(): Command line -net and -netdev
* qemu_global_option(): Command line -global
* vnc_parse_func(): Command line -display, -vnc, default display, HMP
change, QMP change. Bummer.
* qemu_pci_hot_add_nic(): HMP pci_add
* usb_net_init(): Command line -usbdevice, HMP usb_add
Propagate errors through qemu_opts_parse(). Create a convenience
function qemu_opts_parse_noisily() that passes errors to
error_report_err(). Switch all non-QMP users outside tests to it.
That leaves vnc_parse_func(). Propagate errors through it. Since I'm
touching it anyway, rename it to vnc_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
disas does not need to access the CPU env for any reason. Change the
APIs to accept CPU pointers instead. Small change pattern needs to be
applied to all target translate.c. This brings us closer to making
disas.o a common-obj and less architecture specific in general.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The monitor currently has one helper, mon_get_cpu() which will return
an env pointer. The target specific users of this API want an env, but
all the target agnostic users really just want the cpu pointer. These
users then need to use the target-specifically defined ENV_GET_CPU to
navigate back up to the CPU from the ENV. Split the API for the two
uses cases to remove all need for ENV_GET_CPU.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since the "S" argument type is only used with the "?" flag,
the bug can't bite.
Signed-off-by: Bandan Das <bsd@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When a command fails due to incorrect syntax or input, suggest using
the "help" command to get more information about the command. This
is only applicable for HMP.
Signed-off-by: Bandan Das <bsd@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There's too much going on in monitor_parse_command().
Split up the arguments parsing bits into a separate function
monitor_parse_arguments(). Let the original function check for
command validity and sub-commands if any and return data (*cmd)
that the newly introduced function can process and return a
QDict. Also, pass a pointer to the cmdline to track current
parser location.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The preferred solution is to use tracepoints and there
is good chance of bitrot with the debug prints not being
enabled at compile time. Remove them.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that qbool is fixed, let's fix getting and setting a bool
value to a qdict member to also use C99 bool rather than int.
I audited all callers to ensure that the changed return type
will not cause any changed semantics.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We require a C99 compiler, so let's use 'bool' instead of 'int'
when dealing with boolean values. There are few enough clients
to fix them all in one pass.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Setting QEMU_AUDIO_LOG_TO_MONITOR=1 can crash qemu (if qemu tries to log
to the monitor before it's being initialized), and also nothing else in
qemu logs to the monitor.
This log to monitor feature was the last thing that used the default_mon
variable, so I removed it too (as using it can cause problems).
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 65207c5 accidentally dropped a line of code we need along with
a comment that became wrong then. This made QMP reject "id":
{"execute": "system_reset", "id": "1"}
{"error": {"class": "GenericError", "desc": "QMP input object member 'id' is unexpected"}}
Put the lost line right back, so QMP again accepts and returns "id",
as promised by the ABI:
{"execute": "system_reset", "id": "1"}
{"return": {}, "id": "1"}
Reported-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Tested-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1433753070-12632-2-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
... and change return type to bool.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
While there, inline the pointless qmp_cmd_mode() wrapper.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Superfluous since commit 30f5041 removed it from HMP.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
While there, rename its type as well, from MonitorControl to
MonitorQMP.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
The previous commits narrowed use of QError to handle_qmp_command()
and its helpers monitor_protocol_emitter(), build_qmp_error_dict().
Narrow it further to just the command handler call: instead of
converting Error to QError throughout handle_qmp_command(), convert
the QError gotten from the command handler to Error, and switch the
helpers from QError to Error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Move mon->error handling to its caller handle_qmp_command().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
