Now that we have everything in place, make the machine description
aware of the fact that we can now handle 15 virtual CPUs!
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- Max cpus is 15 because of MPIC
With this patch, we generate CPU nodes in the machine initialization, giving
us the freedom to generate as many nodes as we want and as the machine supports,
but only those.
This is a first step towards a much cleaner device tree generation
infrastructure, where we would not require precompiled dtb blobs anymore.
Signed-off-by: Alexander Graf <agraf@suse.de>
The guest OS wants to know where the guest spins, so let's tell him while
updating the CPU nodes with the frequencies anyways.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- use new spin table address
CPUs that are not the boot CPU need to run in spinning code to check if they
should run off to execute and if so where to jump to. This usually happens
by leaving secondary CPUs looping and checking if some variable in memory
changed.
In an environment like Qemu however we can be more clever. We can just export
the spin table the primary CPU modifies as MMIO region that would event based
wake up the respective secondary CPUs. That saves us quite some cycles while
the secondary CPUs are not up yet.
So this patch adds a PV device that simply exports the spinning table into the
guest and thus allows the primary CPU to wake up secondary ones.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- change into MMIO scheme
- map the secondary NIP instead of 0 1:1
- only map 64MB for TLB, same as u-boot
- prepare code for 64-bit spinnings
v2 -> v3:
- remove r6
- set MAS2_M
- map EA 0
- use second TLB1 entry
v3 -> v4:
- change to memoryops
v4 -> v5:
- fix endianness bugs
v5 -> v6:
- add header
We should only keep CPU nodes in the device tree around that we really have
virtual CPUs for. So remove all superfluous entries that we just keep there
in case someone wants to create a lot of vCPUs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we can so nicely find out the host's frequencies, we should also
make sure that we get them into all virtual CPUs' device tree nodes.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have nice and shiny APIs to read out the host's clock and timebase
frequencies, let's use them in the bamboo code as well!
Signed-off-by: Alexander Graf <agraf@suse.de>
We don't need mpc8544_copy_soc_cell anymore, since we're explicitly reading
host values and writing guest values respectively.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have generic KVM functions to read out the host tb and clock
frequencies, let's use them in the e500 code!
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we can generate multiple envs for all our virtual CPUs, we
also need to tell the MPIC that we have multiple CPUs connected and
connect them all to the respective virtual interrupt lines.
Signed-off-by: Alexander Graf <agraf@suse.de>
When creating a VM, we should go through smp_cpus and create a virtual CPU for
every CPU the user requested. This patch adds support for that and moves some
code around to make that more convenient.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MPIC emulation is now capable of handling up to 32 CPUs. Reflect that in
the code exporting the numbers out and fix an integer overflow while at it.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- Max cpus is 15 due to cINT routing
- Report nb_cpus not MAX_CPUS in MPIC capabilities
The bit definitions for critical interrupt routing are in PowerPC order
(most significant bit is 0), while we end up shifting it with normal bit
order. Turn the numbers around so we actually end up fetching the
right ones.
Signed-off-by: Alexander Graf <agraf@suse.de>
The IPI dispatch registers are write only according to every MPIC
spec I have found. So instead of pretending you could read back something
from them, better not handle them at all.
Reported-by: Elie Richa <richa@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We use the IDE register with IPIs as a mask to keep track which processors
have already acknowledged the respective interrupt. So we need to initialize
it to 0 to make sure that it doesn't accidently fire an IPI on CPU0 when the
first IPI is triggered.
Reported-by: Elie Richa <richa@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v2 -> v3:
- fix IDE IPI reset
The current IPI support in the MPIC code is incomplete and doesn't work. This
code adds proper support for IPIs in MPIC by using the IDE register to remember
which CPUs IPIs are still outstanding to. New triggers through the IPI trigger
register only add to the list of CPUs we want to IPI.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- Use MAX_IPI instead of hardcoded 4
Signed-off-by: Alexander Graf <agraf@suse.de>
The MPIC exports a page for each CPU that it controls. To support more than
one CPU, we need to also reserve the MMIO space according to the amount of
CPUs we want to support.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MPIC exports a register set for each CPU connected to it. They can all
be accessed through specific registers or using a shadow page that is mapped
differently depending on which CPU accesses it.
This patch implements the shadow map, making it possible for guests to access
the CPU local registers using the same address on each CPU.
Signed-off-by: Alexander Graf <agraf@suse.de>
This also lets the user see the irq in "info qtree".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Restructure common properties for sPAPR devices so that IRQ definitions
can be added in one place.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Right now the spapr devices cannot be instantiated with -device,
because the IRQs need to be passed to the spapr_*_create functions.
Do this instead in the bus's init wrapper.
This is particularly important with the conversion from scsi-disk
to scsi-{cd,hd} that Markus made. After his patches, if you
specify a scsi-cd device attached to an if=none drive, the default
VSCSI controller will not be created and, without qdevification,
you will not be able to add yours.
NOTE from agraf: added small compile fix
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
We are mapping ESCC to a static (incorrect) address on machine init. This
overlaps with our vram, rendering the screen barely usable.
Since openBIOS is clever enough to map ESCC to where it needs to be, we can
just drop that invalid map and everyone's happy.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Missed during memory region conversion: The i8259 now depends on the ISA
bus being created first. Reorder the initialization.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This requires some amount of hoop-jumping, so that we don't
inadvertently claim port 0x3f6, which is used by ISA IDE.
The sysbus initialization path is as yet unconverted.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Slightly non-obvious with mips_jazz passing in the region
structure to populate.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
The only non-obvious part is pic_poll_read which used
"addr1 >> 7" to detect whether one referred to either
the master or slave PIC. Instead, test this directly.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
i8259 is an ISA device (or at least, depends on the ISA infrastructure to
register its ioport); and the ISA bus is supplied by piix4. Later patches
make this dependency explicit.
Use qemu_irq_proxy() to stop the cycle by adding an extra layer of
indirection.
Signed-off-by: Avi Kivity <avi@redhat.com>
In particular, the i8259 was being initialized before the ISA bus,
leading to a crash.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
To replace isa_init_ioport and isa_init_ioport_range
as the ISA devices are converted to the memory api.
[avi: use memory_region_size()]
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Not used yet, but at least we're provided with the correct region.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Returns the I/O address space. Useful for implementing
PCI-ISA bridge devices.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
In some cases we have a circular dependency involving irqs - the irq
controller depends on a bus, which in turn depends on the irq controller.
Add qemu_irq_proxy() which acts as a passthrough, except that the target
irq may be set later on.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The virtio code uses wmb() macros in several places, as required by the
SMP-aware virtio protocol. However the wmb() macro is locally defined
to be a compiler barrier only. This is probably sufficient on x86
due to its strong storage ordering model, but it certainly isn't on other
platforms, such as ppc.
In any case, qemu already has some globally defined memory barrier macros
in qemu-barrier.h. This patch, therefore converts virtio.c to use those
barrier macros. The macros in qemu-barrier.h are also wrong (or at least,
safe for x86 only) but this way at least there's only one place to fix
them.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Need to check that guest slot/device number is not > 31 or walk off
the devfn table when checking if a devfn is available or not in a guest.
before this fix, passing in an addr=abc or addr=34,
can crash qemu, sometimes fail gracefully if data past end
of devfn table fails the availability test.
with this fix, get clean error:
Property 'pci-assign.addr' doesn't take value '34'
also tested when no addr= param passed for guest (pcicfg) address,
and that worked as well.
Signed-off-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
