This commit ports command handlers that receive three arguments to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This commit ports command handlers that receive two arguments to use
the new monitor's dictionary.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Ensure that packets enqueued for delayed delivery are dequeued in FIFO
order. At least one simplistic guest TCP/IP stack became unhappy due to
sporadically reordered packet streams.
At this chance, switch the send queue implementation to TAILQ.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The error message for an unknown network device given to
monitor command set_link looks better with a terminating
linefeed.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Unless a virtual server address was explicitly defined (which is
impossible with the legacy -net channel format), guestfwd did not
properly forwarded host->guest packets. This patch fixes it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows a program to initialize a host networking device using a
file descriptor passed over a unix monitor socket.
The program must first pass the file descriptor using SCM_RIGHTS
ancillary data with the getfd monitor command. It then may do
"host_net_add tap fd=name" to use the named file descriptor.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This got broken between a13a4126c8 and c92ef6a22d: old slirp code used
255.255.255.0.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If no tap,sndbuf= arg is supplied, we use a default value. If
TUNSETSNDBUF fails in this case, we should not abort.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On reflection, perhaps it does make sense to set a default value for
the sndbuf= tap parameter.
For best effect, sndbuf= should be set to just below the capacity of
the physical NIC.
Setting it higher will cause packets to be dropped before the limit
is hit. Setting it much lower will not cause any problems unless
you set it low enough such that the guest cannot queue up new packets
before the NIC has emptied its queue.
In Linux, txqueuelen=1000 by default for ethernet NICs. Given a 1500
byte MTU, 1Mb is a good choice for sndbuf.
If it turns out that txqueuelen is actually much lower than this, then
sndbuf is essentially disabled. In the event that txqueuelen is much
higher, it's unlikely that the NIC will be able to empty a 1Mb queue.
Thanks to Herbert Xu for this logic.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Cc: Herbert Xu <herbert.xu@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Extend the syntax of hostfwd_add/remove to optionally take a tuple of
VLAN ID and slirp stack name. If those are omitted, the commands will
continue to work on the first registered slirp stack.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce qemu_find_vlan_client_by_name for VLANClientState lookup based
on VLAN ID and client name. This is useful for monitor commands.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Push the smb state, smb_dir, into SlirpState and construct it in a way
that allows multiple smb instances (one per slirp stack). Remove the smb
directory on slirp cleanup instead of qemu termination. As VLAN clients
are also cleaned up on process termination, no feature is lost.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make sure for invocations from the monitor that slirp_smb properly
reports errors and doesn't terminate qemu.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of open-coding this, we can use the power of the shell to remove
the smb_dir on exit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Once again this was a long journey to reach the destination: Allow to
instantiate slirp multiple times. But as in the past, the journey was
worthwhile, cleaning up, fixing and enhancing various parts of the user
space network stack along the way.
What is this particular change good for? Multiple slirps instances
allow separated user space networks for guests with multiple NICs. This
is already possible, but without any slirp support for the second
network, ie. without a chance to talk to that network from the host via
IP. We have a legacy guest system here that benefits from this slirp
enhancement, allowing us to run both of its NICs purely over
unprivileged user space IP stacks.
Another benefit of this patch is that it simply removes an artificial
restriction of the configuration space qemu is providing, avoiding
another source of surprises that users may face when playing with
possible setups.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allocate the internal slirp state dynamically and provide and call
slirp_cleanup to properly release it after use. This patch finally
unbreaks slirp release and re-instantiation via host_net_* monitor
commands.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This now also exports the internal state to the slirp users in qemu,
returning it from slirp_init and expecting it along with service
invocations. Additionally provide an opaque value interface for the
callbacks from slirp into the qemu core.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Slirp doesn't invoke slirp[_can]_output before it is initialized. The
motivation for these checks (3b7f5d479c) no longer applies. So drop
them.
Note: slirp_vc will become invalid if the slirp stack is removed during
runtime. But this is no new bug and will be fixed later.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid the need for slirp_is_inited by refactoring the protected
slirp_select_* functions. This also avoids the clearing of all fd sets
on select errors.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As agreed on the mailing list, there is no interest in keeping the
usually disabled slirp statistics in the tree. So this patch removes
them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Break out sockstats from the slirp statistics and present them under the
new info category "usernet". This patch also improves the current output
/wrt proper reporting connection source and destination.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Prevent that the users accidentally shoots down dynamic sockets. This
allows to remove looping for removals as there can now only be one
match.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Extend the hostfwd rule format so that the user can specify on which
host interface qemu should listen for incoming connections. If omitted,
binding will takes place against all interfaces.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Improve the monitor interface for adding and removing host forwarding
rules by splitting it up in two commands and rename them to hostfwd_add
and hostfwd_remove. Also split up the paths taken for legacy -redir
support and the monitor add command as the latter will be extended later
on.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With the internal IP configuration made more flexible, we can now
enhance the user interface. This patch adds a number of new options to
"-net user": net (address and mask), host, dhcpstart, dns and smbserver.
It also renames "redir" to "hostfwd" and "channel" to "guestfwd" in
order to (hopefully) clarify their meanings. The format of guestfwd is
extended so that the user can define not only the port but also the
virtual server's IP address the forwarding starts from.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
So far a couple of slirp-related parameters were expressed via
stand-alone command line options. This it inconsistent and unintuitive.
Moreover, it prevents both dynamically reconfigured (host_net_add/
delete) and multi-instance slirp.
This patch refactors the configuration by turning -smb, -redir, -tftp
and -bootp as well as -net channel into options of "-net user". The old
stand-alone command line options are still processed, but no longer
advertised. This allows smooth migration of management applications to
to the new syntax and also the extension of that syntax later in this
series.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 1c6ed9f337.
It's redundant to slirp statistics, which are going to be split up /
reworked later on.
Conflicts:
monitor.c
net.c
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add an option to specify the number of MSI-X vectors for PCI NIC cards. This
can also be used to disable MSI-X, for compatibility with old qemu. This
option currently only affects virtio cards.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
virtio-net needs this - for the same purpose that it currently uses the
return value from qemu_sendv_packet().
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2.6.30 adds a new TUNSETSNDBUF ioctl() which allows a send buffer limit
for the tap device to be specified. When this limit is reached, a tap
write() will return EAGAIN and poll() will indicate the fd isn't
writable.
This allows people to tune their setups so as to avoid e.g. UDP packet
loss when the sending application in the guest out-runs the NIC in the
host.
There is no obviously sensible default setting - a suitable value
depends mostly on the capabilities of the physical NIC through which the
packets are being sent.
Also, note that when using a bridge with netfilter enabled, we currently
never get EAGAIN because netfilter causes the packet to be immediately
orphaned. Set /proc/sys/net/bridge/bridge nf-call-iptables to zero to
disable this behaviour.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
net_tap_fd_init() already returns TAPState, so this is a sensible
cleanup in its own right.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a write() on tapfd returns EAGAIN, return zero so that the packet
gets queued (in the case of async send) and enable polling tapfd for
writing.
When tapfd becomes writable, disable write polling and flush any queued
packets.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a helper to enable/disable the read polling on tapfd.
We need this, because we want to start write polling on the tapfd too
and enable/disable both types of polling independently.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If tap has any packets queued at host_net_remove time, it needs to purge
them in order to prevent a sent callback being invoked for it.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If net client sends packets asynchronously, it needs to purge its queued
packets in cleanup() so as to prevent sent callbacks being invoked with
a freed client.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make net_client_init() accept addr=, put the value into struct
NICinfo. Use it in pci_nic_init(), and remove arguments bus and
devfn.
Don't support addr= in third argument of monitor command pci_add,
because that clashes with its first argument. Admittedly unelegant.
Machines "malta" and "r2d" have a default NIC with a well-known PCI
address. Deal with that the same way as the NIC model: make
pci_nic_init() take an optional default to be used when the user
doesn't specify one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix the pcap dumps on Win32 and other systems where O_BINARY is required.
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The code how it is today, is totally painful to read and keep.
To begin with, the code is duplicated with the option rom loading
code that linux_boot and vga are already using.
This patch introduces a "bootable" state in NICInfo structure,
that we can use to keep track of whether or not a given nic should
be bootable, avoiding the introduction of yet another global state.
With that in hands, we move the code in vl.c to hw/pc.c, and use
the already existing infra structure to load those option roms.
Error checking code suggested by Mark McLoughlin
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Type casts removing the const attribute are bad because
they hide the fact that the argument remains const.
They also result in a compiler warning (at least with MS-C).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Work around buffer and ioctlsocket argument type signedness problems
Suppress a prototype which is unused on mingw32
Expand a macro to avoid warnings from some GCC versions
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
If a packet is queued by qemu_send_packet(), remove I/O
handler for the tap fd until we get notification that the
packet has been sent.
A not insignificant side effect of this is we can now
drain the tap send queue in one go without fear of packets
being dropped.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Add a qemu_send_packet() variant which will queue up the packet
if it cannot be sent when all client queues are full. It later
invokes the supplied callback when the packet has been sent.
If qemu_send_packet_async() returns zero, the caller is expected
to not send any more packets until the queued packet has been
sent.
Packets are queued iff a receive() handler returns zero (indicating
queue full) and the caller has provided a sent notification callback
(indicating it will stop and start its own queue).
We need the packet sending API to support queueing because:
- a sending client should process all available packets in one go
(e.g. virtio-net emptying its tx ring)
- a receiving client may not be able to handle the packet
(e.g. -EAGAIN from write() to tapfd)
- the sending client could detect this condition in advance
(e.g. by select() for writable on tapfd)
- that's too much overhead (e.g. a select() call per packet)
- therefore the sending client must handle the condition by
dropping the packet or queueing it
- dropping packets is poor form; we should queue.
However, we don't want queueing to be completely transparent. We
want the sending client to stop sending packets as soon as a
packet is queued. This allows the sending client to be throttled
by the receiver.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
VLANClientState's fd_read() handler doesn't read from file
descriptors, it adds a buffer to the client's receive queue.
Re-name the handlers to make things a little less confusing.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
This, apparently, is the style we prefer - all VLANClientState
should be an argument to qemu_new_vlan_client().
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Reduce the number of packets dropped under heavy network
traffic by only reading a packet from the tapfd when a
client can actually handle it.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
If a vlan client has no fd_can_read(), that means it can
always receive packets. The current code assumes it can *never*
receive packets.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
KVM uses a 64k buffer for reading from tapfd (for GSO support)
and allocates the buffer with TAPState rather than on the stack.
Not allocating it on the stack probably makes sense for qemu
anyway, so merge it in advance of GSO support.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
This patch reorders the initialization of slirp itself as well as its
associated features smb and redirection. So far the first reference to
slirp triggered the initialization, independent of the actual -net user
option which may carry additional parameters. Now we save any request to
add a smb export or some redirections until the actual initialization of
the stack. This also allows to move a few parameters that were passed
via global variable into the argument list of net_slirp_init.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
As host network devices can also be instantiated via the monitor, errors
should then be reported to the related monitor instead of stderr. This
requires larger refactoring, so this patch starts small with introducing
a helper to catch both cases and convert net_client_init as well as
net_slirp_redir.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
A small bit of confusion between buffers is causing errors like:
qemu: invalid parameter '10' in 'script=/etc/qemu-ifup,fd=10'
instead of:
qemu: invalid parameter 'script' in 'script=/etc/qemu-ifup,fd=10'
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
OK, last try: 8e4416af45 broke -net socket, ffad4116b9 tried to fix it
but broke error reporting of invalid parameters. So this patch widely
reverts ffad4116b9 again and intead fixes those callers of check_params
that originally suffered from overwritten buffers by using separate
ones.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
This reverts commit 8cf07dcbe7.
This is a sorry saga.
This commit:
8e4416af45 net: Add parameter checks for VLAN clients
broken '-net socket' and this commit:
ffad4116b9 net: Fix -net socket parameter checks
fixed the problem but introduced another problem which
this commit:
8cf07dcbe7 Fix output of uninitialized strings
fixed that final problem, but causing us to lose some
error reporting information in the process.
Meanwhile Jan posted a patch to mostly re-do ffad4116b9
in a way that fixes the original issue, but without
losing the error reporting information. So, let's revert
8cf07dcbe7 and apply Jan's patch.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Slirp uses fork_exec for spawning service processes, and QEMU uses this
for running smbd. As SIGCHLD is not handled, these processes become
zombies on termination. Fix this by installing a proper signal handler,
but also make sure we disable the signal while waiting on forked network
setup/shutdown scripts.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Fix a race in qemu_send_packet when delivering deferred packets and
add proper deferring also to qemu_sendv_packet.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
In case you're wondering what connections exactly you have open
or maybe redir'ed in the past, you can't really find out from qemu
right now.
This patch enables you to see all current connections the host
only networking holds open, so you can kill them using the previous
patch.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Using the new host_net_redir command you can easily create redirections
on the fly while your VM is running.
While that's great, it's missing the removal of redirections, in case you
want to have a port closed again at a later point in time.
This patch adds support for removal of redirections.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit ffad4116b9 removed the "scratch buffer"
from check_params, but didn't care for the error messages which actually
included this string to tell the user which option was wrong. Now this string
is uninitialized, so this patch removes it from the message.
This means that the user is only told the whole parameter string and has to
pick the wrong option by himself as the callers of check_params can't know this
value any more. An alternative approach would be to revert that commit and do
whatever is needed to fix the original problem without changing check_params.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
My commit ea053add70 broke -net socket by
overwriting an intermediate buffer in the added check_param. Fix this
by switching check_param to automatic buffer allocation and release, ie.
callers no longer have to worry about providing a scratch buffer.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
>> + if (net_client_init(device, opts ? : "") < 0) {
>
> Is this a gcc extension? Do we want to introduce this construct to the
> code base.
Valid remark, fix below.
Thanks,
Jan
-------->
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix net.c compile warning:
CC net.o
net.c: In function net_slirp_redir:
net.c:623: warning: format not a string literal and no format arguments
Signed-off-by: Robert Reif <reif@earthlink.net>
The slirp stack is full of global variables which prevents instantiating
it more than once. Catch this during net_slirp_init to prevent more harm
later on.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7208 c046a42c-6fe2-441c-8c8c-71466251a162
Allow to establish a TCP/UDP connection redirection also via a monitor
command 'host_net_redir'. Moreover, assume TCP as connection type if
that parameter is omitted.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7204 c046a42c-6fe2-441c-8c8c-71466251a162
Queue packets that are send during an ongoing packet delivery. This
ensures that packets will always arrive in their logical order at each
client of a VLAN. Currently, slirp generates such immediate relies, and
e.g. packet-sniffing clients on the same VLAN may get confused.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7203 c046a42c-6fe2-441c-8c8c-71466251a162
Fix the documentation of the host_net_add monitor command and allow the
user to pass no options at all. Moreover, inform the user on the
monitor terminal if a request failed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7201 c046a42c-6fe2-441c-8c8c-71466251a162
This patch is derived from Tristan Gingold's patch. It adds a new VLAN
client type that writes all traffic on the VLAN it is attached to into a
pcap file. Such a file can then be analyzed offline with Wireshark or
tcpdump.
Besides rebasing and some minor cleanups, the major differences to the
original version are:
- support for enabling/disabling via the monitor (host_net_add/remove)
- no special ordering of VLAN client list, qemu_send_packet now takes
care of properly ordered packets
- 64k default capturing limit (I hate tcpdump's default)
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7200 c046a42c-6fe2-441c-8c8c-71466251a162
This aims at helping the user to find typos or other mistakes in
parameter lists passed for VLAN client initialization. The existing
parsing infrastructure does not allow a leaner approach, but this is
better than nothing IMHO.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7197 c046a42c-6fe2-441c-8c8c-71466251a162
In case no symbolic name is provided when requesting VLAN connection via
listening TCP socket ('-net socket,listen=...'), qemu crashes. This
fixes the cause.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7196 c046a42c-6fe2-441c-8c8c-71466251a162
Make sure that we do not delete guest NICs via host_net_remove.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7195 c046a42c-6fe2-441c-8c8c-71466251a162
It's allocated using qemu_mallocz(), so ...
The name and model strings are strdup() allocated, so free()
is still appropriate for them.
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7151 c046a42c-6fe2-441c-8c8c-71466251a162
We're currently leaking memory and file descriptors on device
hot-unplug.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7150 c046a42c-6fe2-441c-8c8c-71466251a162
Now that we abort() on malloc, neither qemu_find_vlan() nor
net_tap_fd_init() can fail.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7146 c046a42c-6fe2-441c-8c8c-71466251a162
We weren't freeing the name string everywhere.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7144 c046a42c-6fe2-441c-8c8c-71466251a162
struct iovec is now defined in qemu-common.h if needed, so we don't need
the tap code to handle !defined(HAVE_IOVEC).
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7143 c046a42c-6fe2-441c-8c8c-71466251a162
There is no need to check for valid prefixes on the the device name
when removing it. If the device name is found on the vlan client list,
it can be removed, regardless of the prefix used on its name.
To reproduce the bug, just run this on the monitor:
(qemu) host_net_add user name=foobar
(qemu) host_net_remove 0 foobar
invalid host network device foobar
(qemu)
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6891 c046a42c-6fe2-441c-8c8c-71466251a162
We want to globally define WIN_LEAN_AND_MEAN and WINVER to particular values so
let's do it in OS_CFLAGS.
Then, we can pepper in windows.h includes where using #includes that require it.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6783 c046a42c-6fe2-441c-8c8c-71466251a162
Refactor the monitor API and prepare it for decoupled terminals:
term_print functions are renamed to monitor_* and all monitor services
gain a new parameter (mon) that will once refer to the monitor instance
the output is supposed to appear on. However, the argument remains
unused for now. All monitor command callbacks are also extended by a mon
parameter so that command handlers are able to pass an appropriate
reference to monitor output services.
For the case that monitor outputs so far happen without clearly
identifiable context, the global variable cur_mon is introduced that
shall once provide a pointer either to the current active monitor (while
processing commands) or to the default one. On the mid or long term,
those use case will be obsoleted so that this variable can be removed
again.
Due to the broad usage of the monitor interface, this patch mostly deals
with converting users of the monitor API. A few of them are already
extended to pass 'mon' from the command handler further down to internal
functions that invoke monitor_printf.
At this chance, monitor-related prototypes are moved from console.h to
a new monitor.h. The same is done for the readline API.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
net socket oversized packet
This is a patch being carried by Ubuntu against kvm/qemu.
Verify packet size before performing memcpy().
Signed-off-by: Dustin Kirkland <kirkland@canonical.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6647 c046a42c-6fe2-441c-8c8c-71466251a162
Add monitor command to hot-add PCI devices (nic and storage).
Syntax is:
pci_add pci_addr=[[<domain>:]<bus>:]<slot> nic|storage params
It returns the domain, bus and slot for the newly added device on success.
It is possible to attach a disk to a device after PCI initialization via
the drive_add command. If so, a manual scan of the SCSI bus on the guest
is necessary.
Save QEMUMachine necessary for drive_init.
Add monitor command to hot-remove devices, remove device data on _EJ0 notification.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6610 c046a42c-6fe2-441c-8c8c-71466251a162
Export net/drive add/remove functions for device hotplug usage.
Return the table index on add.
Return failure instead of exiting if limit has been reached
on drive_add.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6599 c046a42c-6fe2-441c-8c8c-71466251a162
Dynamically allocate nic info index, so to reuse indexes when devices are
removed.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6595 c046a42c-6fe2-441c-8c8c-71466251a162
If link is down, pretend that the packet has been successfully sent.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6444 c046a42c-6fe2-441c-8c8c-71466251a162
Kill off the hack that parses info_str for the tap interface
name to pass as the argument to the downscript and, instead,
just explicitly keep a copy of the string for later.
As reported by John Wong, this commit:
Add qemu_format_nic_info_str()
changed the invocation of downscript from e.g.
/path/kvm-ifdown "tap0"
to:
/path/kvm-ifdown "tap0,script=/path/kvm-ifup,downscript=/path/kvm-ifdown"
This fix restores the original behavior.
Reported-by: John Wong <johnw@wonghome.net>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6285 c046a42c-6fe2-441c-8c8c-71466251a162
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6256 c046a42c-6fe2-441c-8c8c-71466251a162
Add a monitor command to setting a given network device's link status
to 'up' or 'down'.
Allows simulation of network cable disconnect.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6247 c046a42c-6fe2-441c-8c8c-71466251a162
Expose new slirp capabilities to user through a command line options.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6242 c046a42c-6fe2-441c-8c8c-71466251a162
The model type used to be printed as part of the nic info. It was removed when
the name type was added. This adds back a model field for those that were
using it previously.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6239 c046a42c-6fe2-441c-8c8c-71466251a162
Allow the user to supply a vlan client name on the command line.
This is probably only useful for management tools so that they can
use their own names rather than parsing the output of 'info network'.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6220 c046a42c-6fe2-441c-8c8c-71466251a162
Factor out a simple little function for formatting a NIC's
info_str and make all NICs use it.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6218 c046a42c-6fe2-441c-8c8c-71466251a162
Automatically assign a name to each vlan client based on its model,
e.g. e1000.0, tap.3 or vde.1.
This name is intended to be used by the forthcoming 'set_link'
monitor command.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6217 c046a42c-6fe2-441c-8c8c-71466251a162
Don't lose track of what type/model a vlan client is so that we can
e.g. assign a global per-model id to clients.
The entire patch is basically a tedious excercise in making sure the
type/model string gets propagated down to qemu_new_vlan_client().
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6216 c046a42c-6fe2-441c-8c8c-71466251a162
Since the introduction of net.c in r5581 there had been 2 places where
the location of the TAP helper scripts and SMB daemon are defined.
The following patch move those definitions to net.h so they are accessible
for net.c and vl.c but defined only once
(Carlo Marcelo Arenas Belon)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6093 c046a42c-6fe2-441c-8c8c-71466251a162
This is adapted from kvm-userspace. It allows readv to be used with tap when
the host supports it.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6074 c046a42c-6fe2-441c-8c8c-71466251a162
This adds virtio-net support. This is based on the virtio-net driver
that exists in kvm-userspace. This also adds a new qemu_sendv_packet
which virtio-net requires.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6073 c046a42c-6fe2-441c-8c8c-71466251a162
when compiling on NetBSD:
warning: array subscript has type 'char'
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5727 c046a42c-6fe2-441c-8c8c-71466251a162
This will improve the build time.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5699 c046a42c-6fe2-441c-8c8c-71466251a162
Currently tap does not generate signals on I/O; this causes
network latency to be dependent on the timer tick (1ms without
dyntick, guest dependent with dyntick). By generating a signal
on I/O, we can inform the guest immediately that a packet has
arrived.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5688 c046a42c-6fe2-441c-8c8c-71466251a162
