The idea is simple - backup is "written-once" data. It is written block
by block and it is large enough. It would be nice to save storage
space and compress it.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The idea is simple - backup is "written-once" data. It is written block
by block and it is large enough. It would be nice to save storage
space and compress it.
The patch adds a flag to the qmp/hmp drive-backup command which enables
block compression. Compression should be implemented in the format driver
to enable this feature.
There are some limitations of the format driver to allow compressed writes.
We can write data only once. Though for backup this is perfectly fine.
These limitations are maintained by the driver and the error will be
reported if we are doing something wrong.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we can support boxed commands, use it to greatly reduce the
number of parameters (and likelihood of getting out of sync) when
adjusting blockdev-backup parameters.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that we can support boxed commands, use it to greatly reduce the
number of parameters (and likelihood of getting out of sync) when
adjusting drive-backup parameters.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no reason why an NBD server couldn't be started for any node,
even if it's not on the top level. This converts nbd-server-add to
accept a node-name.
Note that there is a semantic difference between using a BlockBackend
name and the node name of its root: In the former case, the NBD server
is closed on eject; in the latter case, the NBD server doesn't drop its
reference and keeps the image file open this way.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
drive-mirror to accept a node-name without lifting the restriction that
we're operating at a root node.
In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
drive-backup and the corresponding transaction action to accept a
node-name without lifting the restriction that we're operating at a root
node.
In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
change-backing-file to accept a node-name without lifting the
restriction that we're operating at a root node.
In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
blockdev-snapshot-internal-sync to accept a node-name without lifting
the restriction that we're operating at a root node.
In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
blockdev-snapshot-delete-internal-sync to accept a node-name without
lifting the restriction that we're operating at a root node.
In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
blockdev-mirror to accept a node-name without lifting the restriction
that we're operating at a root node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
blockdev-backup and the corresponding transaction action to accept a
node-name without lifting the restriction that we're operating at a root
node.
In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
block-commit to accept a node-name without lifting the restriction that
we're operating at a root node.
As libvirt makes use of the DeviceNotFound error class, we must add
explicit code to retain this behaviour because qmp_get_root_bs() only
returns GenericErrors.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
In order to remove the necessity to use BlockBackend names in the
external API, we want to allow node-names everywhere. This converts
block-stream to accept a node-name without lifting the restriction that
we're operating at a root node.
In case of an invalid device name, the command returns the GenericError
error class now instead of DeviceNotFound, because this is what
qmp_get_root_bs() returns.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Commit 0d978913 changed blockdev-backup to accept arbitrary node names
instead of device names (i.e. root nodes) for the backup target.
However, it forgot to make the same change in transactions and to update
the documentation. This patch fixes these omissions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The qemu-img info command has the ability to expose format
specific metadata about volumes. Wire up this facility for
the LUKS driver to report on cipher configuration and key
slot usage.
$ qemu-img info ~/VirtualMachines/demo.luks
image: /home/berrange/VirtualMachines/demo.luks
file format: luks
virtual size: 98M (102760448 bytes)
disk size: 100M
encrypted: yes
Format specific information:
ivgen alg: plain64
hash alg: sha1
cipher alg: aes-128
uuid: 6ddee74b-3a22-408c-8909-6789d4fa2594
cipher mode: xts
slots:
[0]:
active: true
iters: 572706
key offset: 4096
stripes: 4000
[1]:
active: false
key offset: 135168
[2]:
active: false
key offset: 266240
[3]:
active: false
key offset: 397312
[4]:
active: false
key offset: 528384
[5]:
active: false
key offset: 659456
[6]:
active: false
key offset: 790528
[7]:
active: false
key offset: 921600
payload offset: 2097152
master key iters: 142375
One somewhat undesirable artifact is that the data fields are
printed out in (apparently) random order. This will be addressed
later by changing the way the block layer pretty-prints the
image specific data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1469192015-16487-3-git-send-email-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When creating new block encryption volumes, we accept a list of
parameters to control the formatting process. It is useful to
be able to query what those parameters were for existing block
devices. Add a qcrypto_block_get_info() method which returns a
QCryptoBlockInfo instance to report this data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1469192015-16487-2-git-send-email-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds a way to specify multiple volfile servers to the gluster
block backend of QEMU with tcp|rdma transport types and their port numbers.
Problem:
Currently VM Image on gluster volume is specified like this:
file=gluster[+tcp]://host[:port]/testvol/a.img
Say we have three hosts in a trusted pool with replica 3 volume in action.
When the host mentioned in the command above goes down for some reason,
the other two hosts are still available. But there's currently no way
to tell QEMU about them.
Solution:
New way of specifying VM Image on gluster volume with volfile servers:
(We still support old syntax to maintain backward compatibility)
Basic command line syntax looks like:
Pattern I:
-drive driver=gluster,
volume=testvol,path=/path/a.raw,[debug=N,]
server.0.type=tcp,
server.0.host=1.2.3.4,
server.0.port=24007,
server.1.type=unix,
server.1.socket=/path/socketfile
Pattern II:
'json:{"driver":"qcow2","file":{"driver":"gluster",
"volume":"testvol","path":"/path/a.qcow2",["debug":N,]
"server":[{hostinfo_1}, ...{hostinfo_N}]}}'
driver => 'gluster' (protocol name)
volume => name of gluster volume where our VM image resides
path => absolute path of image in gluster volume
[debug] => libgfapi loglevel [(0 - 9) default 4 -> Error]
{hostinfo} => {{type:"tcp",host:"1.2.3.4"[,port=24007]},
{type:"unix",socket:"/path/sockfile"}}
type => transport type used to connect to gluster management daemon,
it can be tcp|unix
host => host address (hostname/ipv4/ipv6 addresses/socket path)
port => port number on which glusterd is listening.
socket => path to socket file
Examples:
1.
-drive driver=qcow2,file.driver=gluster,
file.volume=testvol,file.path=/path/a.qcow2,file.debug=9,
file.server.0.type=tcp,
file.server.0.host=1.2.3.4,
file.server.0.port=24007,
file.server.1.type=unix,
file.server.1.socket=/var/run/glusterd.socket
2.
'json:{"driver":"qcow2","file":{"driver":"gluster","volume":"testvol",
"path":"/path/a.qcow2","debug":9,"server":
[{"type":"tcp","host":"1.2.3.4","port":"24007"},
{"type":"unix","socket":"/var/run/glusterd.socket"}
]}}'
This patch gives a mechanism to provide all the server addresses, which are in
replica set, so in case host1 is down VM can still boot from any of the
active hosts.
This is equivalent to the backup-volfile-servers option supported by
mount.glusterfs (FUSE way of mounting gluster volume)
credits: sincere thanks to all the supporters
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1468947453-5433-6-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
this patch adds 'GlusterServer' related schema in qapi/block-core.json
[Jeff: minor fix-ups of comments and formatting, per patch reviews]
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1468947453-5433-5-git-send-email-prasanna.kalever@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Now that we can support boxed commands, use it to greatly
reduce the number of parameters (and likelihood of getting
out of sync) when adjusting drive-mirror parameters.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <1468535878-3760-1-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we can support boxed commands, use it to greatly
reduce the number of parameters (and likelihood of getting
out of sync) when adjusting throttle parameters.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <1468468228-27827-11-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This saves a lot of memory compared to a statically-sized array,
or at least 24kb could be considered a lot on an Atari ST.
It also makes the code more similar to QmpOutputVisitor.
This removes the limit on the depth of a QObject that can be processed
into a QAPI tree. This is not a problem because QObjects can be
considered trusted; the text received on the QMP wire is untrusted
input, but the JSON parser already takes pains to limit the QObject tree
it creates. We don't need the QMP input visitor to limit it again.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1467906798-5312-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message typo fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This saves a little memory compared to the doubly-linked QTAILQ.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1467906798-5312-2-git-send-email-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Comment tweaked to avoid long line]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
werror/rerror are now available as qdev options. The stats-* options are
removed without an existing replacement; they should probably be
configurable with a separate QMP command like I/O throttling settings.
Removing id is left for another day because this involves updating
qemu-iotests cases to use node-name for everything. Before we can do
that, however, all QMP commands must support node-name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The rerror/werror policies are implemented in the devices, so that's
where they should be configured. In comparison to the old options in
-drive, the qdev properties are only added to those devices that
actually support them.
If the option isn't given (or "auto" is specified), the setting of the
BlockBackend is used for compatibility with the old options. For block
jobs, "auto" is the same as "enospc".
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The 'device' field in all BLOCK_JOB_* events and 'block-job-*' command
is no longer the device name, but the ID of the job. This patch
updates the documentation to clarify that.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a new optional 'job-id' parameter to 'block-commit',
allowing the user to specify the ID of the block job to be created.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a new optional 'job-id' parameter to 'block-stream',
allowing the user to specify the ID of the block job to be created.
The HMP 'block_stream' command remains unchanged.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a new optional 'job-id' parameter to 'blockdev-backup'
and 'drive-backup', allowing the user to specify the ID of the block
job to be created.
The HMP 'drive_backup' command remains unchanged.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a new optional 'job-id' parameter to 'blockdev-mirror'
and 'drive-mirror', allowing the user to specify the ID of the block
job to be created.
The HMP 'drive_mirror' command remains unchanged.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BgpV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-07-06' into staging
QAPI patches for 2016-07-06
# gpg: Signature made Wed 06 Jul 2016 10:00:51 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2016-07-06:
replay: Use new QAPI cloning
sockets: Use new QAPI cloning
qapi: Add new clone visitor
qapi: Add new visit_complete() function
tests: Factor out common code in qapi output tests
tests: Clean up test-string-output-visitor
qmp-output-visitor: Favor new visit_free() function
string-output-visitor: Favor new visit_free() function
qmp-input-visitor: Favor new visit_free() function
string-input-visitor: Favor new visit_free() function
opts-visitor: Favor new visit_free() function
qapi: Add new visit_free() function
qapi: Add parameter to visit_end_*
qemu-img: Don't leak errors when outputting JSON
qapi: Improve use of qmp/types.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have a couple places in the code base that want to deep-clone
one QAPI object into another, and they were resorting to serializing
the struct out to QObject then reparsing it. A much more efficient
version can be done by adding a new clone visitor.
Since cloning is still relatively uncommon, expose the use of the
new visitor via a QAPI_CLONE() macro that takes care of type-punning
the underlying function pointer, rather than generating lots of
unused functions for types that won't be cloned. And yes, we're
relying on the compiler treating all pointers equally, even though
a strict C program cannot portably do so - but we're not the first
one in the qemu code base to expect it to work (hello, glib!).
The choice of adding a fourth visitor type deserves some explanation.
On the surface, the clone visitor is mostly an input visitor (it
takes arbitrary input - in this case, another QAPI object - and
creates a new QAPI object during the course of the visit). But
ever since commit da72ab0 consolidated enum visits based on the
visitor type, using VISITOR_INPUT would cause us to run
visit_type_str(), even though for cloning there is nothing to do
(we just copy the enum value across, without regards to its mapping
to strings). Also, since our input happens to be a QAPI object,
we can also satisfy the internal checks for VISITOR_OUTPUT. So in
the end, I settled with a new VISITOR_CLONE, and chose its value
such that many internal checks can use 'v->type & mask', sticking
to 'v->type == value' where the difference matters.
Note that we can only clone objects (including alternates) and lists,
not built-ins or enums. The visitor core hides integer width from
the actual visitor (since commit 04e070d), and as long as that's the
case, we can't clone top-level integers. Then again, those can
always be cloned by direct copy, since they are not objects with
deep pointers, so it's no real loss. And restricting cloning to
just objects and lists is cleaner than restricting it to non-integers.
As such, I documented that the clone visitor is for direct use only
by code internal to QAPI, and should not be used on incomplete objects
(other than a hack to work around the fact that we allow NULL in place
of "" in visit_type_str() in other output visitors). Note that as
written, the clone visitor will never fail on a complete object.
Scalars (including enums) not at the root of the clone copy just fine
with no additional effort while visiting the scalar, by virtue of a
g_memdup() each time we push another struct onto the stack. Cloning
a string requires deduplication of a pointer, which means it can also
provide the guarantee of an input visitor of never producing NULL
even when still accepting NULL in place of "" the way the QMP output
visitor does.
Cloning an 'any' type could be possible by incrementing the QObject
refcnt, but it's not obvious whether that is better than implementing
a QObject deep clone. So for now, we document it as unsupported,
and intentionally omit the .type_any() callback to let a developer
know their usage needs implementation.
Add testsuite coverage for several different clone situations, to
ensure that the code is working. I also tested that valgrind was
happy with the test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Making each output visitor provide its own output collection
function was the only remaining reason for exposing visitor
sub-types to the rest of the code base. Add a polymorphic
visit_complete() function which is a no-op for input visitors,
and which populates an opaque pointer for output visitors. For
maximum type-safety, also add a parameter to the output visitor
constructors with a type-correct version of the output pointer,
and assert that the two uses match.
This approach was considered superior to either passing the
output parameter only during construction (action at a distance
during visit_free() feels awkward) or only during visit_complete()
(defeating type safety makes it easier to use incorrectly).
Most callers were function-local, and therefore a mechanical
conversion; the testsuite was a bit trickier, but the previous
cleanup patch minimized the churn here.
The visit_complete() function may be called at most once; doing
so lets us use transfer semantics rather than duplication or
ref-count semantics to get the just-built output back to the
caller, even though it means our behavior is not idempotent.
Generated code is simplified as follows for events:
|@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP
| QDict *qmp;
| Error *err = NULL;
| QMPEventFuncEmit emit;
|- QmpOutputVisitor *qov;
|+ QObject *obj;
| Visitor *v;
| q_obj_ACPI_DEVICE_OST_arg param = {
| info
|@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP
|
| qmp = qmp_event_build_dict("ACPI_DEVICE_OST");
|
|- qov = qmp_output_visitor_new();
|- v = qmp_output_get_visitor(qov);
|+ v = qmp_output_visitor_new(&obj);
|
| visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err);
| if (err) {
|@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP
| goto out;
| }
|
|- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov));
|+ visit_complete(v, &obj);
|+ qdict_put_obj(qmp, "data", obj);
| emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err);
and for commands:
| {
| Error *err = NULL;
|- QmpOutputVisitor *qov = qmp_output_visitor_new();
| Visitor *v;
|
|- v = qmp_output_get_visitor(qov);
|+ v = qmp_output_visitor_new(ret_out);
| visit_type_AddfdInfo(v, "unused", &ret_in, &err);
|- if (err) {
|- goto out;
|+ if (!err) {
|+ visit_complete(v, ret_out);
| }
|- *ret_out = qmp_output_get_qobject(qov);
|-
|-out:
| error_propagate(errp, err);
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
qmp_output_visitor_cleanup(); however, we still need to
expose the subtype for qmp_output_get_qobject().
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-10-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
string_output_visitor_cleanup(); however, we still need to
expose the subtype for string_output_get_string().
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-9-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
qmp_input_visitor_cleanup(); which in turn means we no longer
need to return a subtype from qmp_input_visitor_new() nor a
public upcast function.
Generated code changes to qmp-marshal.c look like:
|@@ -52,11 +52,10 @@ void qmp_marshal_add_fd(QDict *args, QOb
| {
| Error *err = NULL;
| AddfdInfo *retval;
|- QmpInputVisitor *qiv = qmp_input_visitor_new(QOBJECT(args), true);
| Visitor *v;
| q_obj_add_fd_arg arg = {0};
|
|- v = qmp_input_get_visitor(qiv);
|+ v = qmp_input_visitor_new(QOBJECT(args), true);
| visit_start_struct(v, NULL, NULL, 0, &err);
| if (err) {
| goto out;
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-8-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
string_input_visitor_cleanup(); which in turn means we no longer
need to return a subtype from string_input_visitor_new() nor a
public upcast function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-7-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
opts_visitor_cleanup(); which in turn means we no longer need
to return a subtype from opts_visitor_new() nor a public upcast
function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-6-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Making each visitor provide its own (awkwardly-named) FOO_cleanup()
is unusual, when we can instead have a polymorphic visit_free()
interface. Over the next few patches, we can use the polymorphic
functions to eliminate the need for a FOO_get_visitor() function
for accessing specific visitor functionality, once everything can
be accessed directly through the Visitor* interfaces.
The dealloc visitor is the first one converted to completely use
the new entry point, since qapi_dealloc_visitor_cleanup() was the
only reason that qapi_dealloc_get_visitor() existed, and only
generated and testsuite code was even using it. With the new
visit_free() entry point in place, we no longer need to expose
the QapiDeallocVisitor subtype through qapi_dealloc_visitor_new(),
and can get by with less generated code, with diffs that look like:
| void qapi_free_ACPIOSTInfo(ACPIOSTInfo *obj)
| {
|- QapiDeallocVisitor *qdv;
| Visitor *v;
|
| if (!obj) {
| return;
| }
|
|- qdv = qapi_dealloc_visitor_new();
|- v = qapi_dealloc_get_visitor(qdv);
|+ v = qapi_dealloc_visitor_new();
| visit_type_ACPIOSTInfo(v, NULL, &obj, NULL);
|- qapi_dealloc_visitor_cleanup(qdv);
|+ visit_free(v);
|}
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-5-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rather than making the dealloc visitor track of stack of pointers
remembered during visit_start_* in order to free them during
visit_end_*, it's a lot easier to just make all callers pass the
same pointer to visit_end_*. The generated code has access to the
same pointer, while all other users are doing virtual walks and
can pass NULL. The dealloc visitor is then greatly simplified.
All three visit_end_*() functions intentionally take a void**,
even though the visit_start_*() functions differ between void**,
GenericList**, and GenericAlternate**. This is done for several
reasons: when doing a virtual walk, passing NULL doesn't care
what the type is, but when doing a generated walk, we already
have to cast the caller's specific FOO* to call visit_start,
while using void** lets us use visit_end without a cast. Also,
an upcoming patch will add a clone visitor that wants to use
the same implementation for all three visit_end callbacks,
which is made easier if all three share the same signature.
For visitors with already track per-object state (the QMP visitors
via a stack, and the string visitors which do not allow nesting),
add an assertion that the caller is indeed passing the same
pointer to paired calls.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-4-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
'qjson.h' is not a QObject subtype; include this file directly in
.c files that are using it, rather than abusing qmp/types.h for
that purpose.
Meanwhile, for files that include a list of individual QObject
subtypes, it's easier to just use qmp/types.h for that purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-2-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
iommus can not be added with -device.
cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXe4l4AAoJECgfDbjSjVRpIz4IALye7mKG61/POA4Gqmhalc3d
HnlNSZ2YcKAuvPg7WWkBuRacrQvVY/MbW1mLloG1lY0tdFgZG8Cy+CY6wJg1NE4c
cXd+77vHkIyrnl+Nil+QOgTFiAsMnD+mXHHsnCDw2jGn3JbgVNuCMi7V34fGkQd2
PDkZyYfwTqO3HytuG0/j2Somc9du1gjYdn+9qigfZVgP96jGDojBuJWuuU5flCB3
Kj5xrOuI01XlbdTk71tVjBJBektQurWr6r7GECDqZIpUfc+BI70FU9jPh+OlLTO/
92yi29ncjyStz4tRnf18xoQ8uBgH/tD1xigEUPRtnm1+0i/tgONBL8cAdBF9FBE=
=ABGE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, pci, virtio: new features, cleanups, fixes
iommus can not be added with -device.
cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 05 Jul 2016 11:18:32 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (30 commits)
vmw_pvscsi: remove unnecessary internal msi state flag
e1000e: remove unnecessary internal msi state flag
vmxnet3: remove unnecessary internal msi state flag
mptsas: remove unnecessary internal msi state flag
megasas: remove unnecessary megasas_use_msi()
pci: Convert msi_init() to Error and fix callers to check it
pci bridge dev: change msi property type
megasas: change msi/msix property type
mptsas: change msi property type
intel-hda: change msi property type
usb xhci: change msi/msix property type
change pvscsi_init_msi() type to void
tests: add APIC.cphp and DSDT.cphp blobs
tests: acpi: add CPU hotplug testcase
log: Permit -dfilter 0..0xffffffffffffffff
range: Replace internal representation of Range
range: Eliminate direct Range member access
log: Clean up misuse of Range for -dfilter
pci_register_bar: cleanup
Revert "virtio-net: unbreak self announcement and guest offloads after migration"
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to eventually stick request_alignment alongside other
BlockLimits, but first, we must ensure it is populated at the
same time as all other limits, rather than being a special case
that is set only when a block is first opened.
Note that when the user does not provide "align", then we were
defaulting to bs->request_alignment - but at this stage in the
initialization, that was always 512. We were also rejecting an
explicit "align":0 from the user; this patch now allows that,
as an explicit request for the default alignment (which may not
always be 512 in the future).
qemu-iotests 77 is particularly sensitive to the fact that we
can specify an artificial alignment override in blkdebug, and
that override must continue to work even when limits are
refreshed on an already open device.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Wire up the nettle and gcrypt hash backends so that they can
support the sha224, sha384, sha512 and ripemd160 hash algorithms.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Users of struct Range mess liberally with its members, which makes
refactoring hard. Create a set of methods, and convert all users to
call them instead of accessing members. The methods have carefully
worded contracts, and use assertions to check them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
