img_convert() and img_amend() use qemu_opts_do_parse(), which reports
errors with qerror_report_err(). Its error messages aren't helpful
here, the caller reports one that actually makes sense. Reproducer:
$ qemu-img convert -o backing_format=raw in.img out.img
qemu-img: Invalid parameter 'backing_format'
qemu-img: Invalid options for file format 'raw'
To fix, propagate errors through qemu_opts_do_parse(). This lifts the
error reporting into callers. Drop it from img_convert() and
img_amend(), keep it in qemu_chr_parse_compat(), bdrv_img_create().
Since I'm touching qemu_opts_do_parse() anyway, write a function
comment for it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().
Most of its users assume the function can't fail. Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.
Just two users remain, in util/qemu-config.c. Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err() in legacy chardev parser
qemu_chr_parse_compat(). Legacy chardev syntax is not to be used in
QMP.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The monitor's auto-completion feature stopped working when stdio is used
as an input and qemu was resumed after it was suspended (using ctrl-z).
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
tcp_get_fds API discards fds if there's more than 1 of these.
It's tricky to fix this without API changes in the generic case.
However, this API is only used by tests ATM, and tests know how
many fds they expect.
So let's not waste cycles trying to fix this properly:
simply assume at most 16 fds (tests use at most 8 now).
assert if some test tries to get more.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If reconnect was set, errors wouldn't always be reported.
Fix that and also only report a connect error once until a
connection has been made.
The primary purpose of this is to tell the user that a
connection failed so they can know they need to figure out
what went wrong. So we don't want to spew too much
out here, just enough so they know.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An error value here would be quite handy and more consistent
with the rest of the code.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
[Make sure SO_ERROR value is passed to error_setg_errno. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It seems that it might be a good idea to know what is at the remote
end of a socket for tracking down issues. So add that to the
socket filename.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds a "reconnect" option to socket backends that gives a reconnect
timeout. This only applies to client sockets. If the other end
of a socket closes the connection, qemu will attempt to reconnect
after the given number of seconds.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This way we can tell if the socket is connected or not. It also splits
the string conversions out into separate functions to make this more
convenient.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This keeps them from having to be passed around and makes them
available for later functions, like printing and reconnecting.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move all socket configuration to qmp_chardev_open_socket().
qemu_chr_open_socket_fd() just opens the socket. This is getting ready
for the reconnect code, which will call open_sock_fd() on a reconnect
attempt.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When more than one is used, the terminal settings aren't restored
correctly on exit. Fixable. However, such usage makes no sense,
because the users race for input, so outlaw it instead.
If you want to connect multiple things to stdio, use the mux
chardev.
Signed-off-by: Li Liu <john.liuli@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Now we have removed the legacy register_char_driver() we can
rename register_char_driver_qapi() to the more obvious and
shorter name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-6-git-send-email-peter.maydell@linaro.org
Now that all the char backends have been converted to the QAPI
framework we can remove the machinery for handling old style
backends.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-5-git-send-email-peter.maydell@linaro.org
Convert the socket char backend to the new style QAPI framework;
this allows it to return an Error ** to callers who might not
want it to print directly about socket failures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-2-git-send-email-peter.maydell@linaro.org
When trying to print data to the pty, we first check if it is connected.
If not, we try to reconnect, but we drop the pending data even if we
have successfully reconnected; this makes us lose the first byte of the very
first transmission.
This small fix addresses the issue by checking once more if the pty is connected
after having tried to reconnect.
Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT7j2XAAoJEJykq7OBq3PIUL4H/11PwoUewF5hXqbsaTVbxLWK
RdufFsy+31+FjM2JaGbJnGyuzRFOevx3SLllnASkltsC7AV+MlQw0qDfQ9MSvsT4
wotQKEfwApleq7u4wp/zTCyNCDRyPTvIDboG2NB/BqHMjsaar2EX3yacSZ+Bv+WJ
cj2OOK9OlHHy0fycx9POgx3RB+OSNvzPcJ2DaNMuDY/0/ss5i6r2aQOT5bgHFTNU
JCAGYB1MJ1dMBqHnfWdsBHXTliPnYoGyYGTLcE2lHO9VBj1hOw867Iemz9mNLWg5
LTWHLnYZLiUZIzGWlBrtnv4lgLsu2xtZCBuiMgDfl6zZtFhIR36SA1M8pdS2yMA=
=3PII
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Fri 15 Aug 2014 18:04:23 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (55 commits)
qcow2: fix new_blocks double-free in alloc_refcount_block()
image-fuzzer: Reduce number of generator functions in __init__
image-fuzzer: Add generators of L1/L2 tables
image-fuzzer: Add fuzzing functions for L1/L2 table entries
docs: Expand the list of supported image elements with L1/L2 tables
image-fuzzer: Public API for image-fuzzer/runner/runner.py
image-fuzzer: Generator of fuzzed qcow2 images
image-fuzzer: Fuzzing functions for qcow2 images
image-fuzzer: Tool for fuzz tests execution
docs: Specification for the image fuzzer
ide: only constrain read/write requests to drive size, not other types
virtio-blk: Correct bug in support for flexible descriptor layout
libqos: Change free function called in malloc
libqos: Correct mask to align size to PAGE_SIZE in malloc-pc
libqtest: add QTEST_LOG for debugging qtest testcases
ide: Fix segfault when flushing a device that doesn't exist
qemu-options: add missing -drive discard option to cmdline help
parallels: 2TB+ parallels images support
parallels: split check for parallels format in parallels_open
parallels: replace tabs with spaces in block/parallels.c
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Technically, fcntl(soc, F_SETFL, O_NONBLOCK)
is incorrect since it clobbers all other file flags.
We can use F_GETFL to get the current flags, set or
clear the O_NONBLOCK flag, then use F_SETFL to set the flags.
Using the qemu_set_nonblock() wrapper.
Signed-off-by: Wangxin <wangxinxin.wang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
imitate nearby code about using '!value' or 'value == NULL'
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
From: Paolo Bonzini <pbonzini@redhat.com>
chr-testdev enables a virtio serial channel to be used for guest
initiated qemu exits. hw/misc/debugexit already enables guest
initiated qemu exits, but only for PC targets. chr-testdev supports
any virtio-capable target. kvm-unit-tests/arm is already making use
of this backend.
Currently there is a single command implemented, "q". It takes a
(prefix) argument for the exit code, thus an exit is implemented by
writing, e.g. "1q", to the virtio-serial port.
It can be used as:
$QEMU ... \
-device virtio-serial-device \
-device virtserialport,chardev=ctd -chardev testdev,id=ctd
or, use:
$QEMU ... \
-device virtio-serial-device \
-device virtconsole,chardev=ctd -chardev testdev,id=ctd
to bind it to virtio-serial port0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After commit f702e62 (serial: change retry logic to avoid concurrency,
2014-07-11), guest boot hangs if the backend is an unconnected PTY.
The reason is that PTYs do not support G_IO_HUP, and serial_xmit is
never called. To fix this, simply invoke serial_xmit immediately
(via g_idle_source_new) when this happens.
Tested-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_chr_be_generic_open cannot be called with the write lock taken,
because it calls client code that may call qemu_chr_fe_write. This
actually happens for the monitor:
0x00007ffff27dbf79 in __GI_raise (sig=sig@entry=6)
0x00007ffff27df388 in __GI_abort ()
0x00005555555ef489 in error_exit (err=<optimized out>, msg=msg@entry=0x5555559796d0 <__func__.5959> "qemu_mutex_lock")
0x00005555558f9080 in qemu_mutex_lock (mutex=mutex@entry=0x555556248a30)
0x0000555555713936 in qemu_chr_fe_write (s=0x555556248a30, buf=buf@entry=0x5555563d8870 "QEMU 2.0.90 monitor - type 'help' for more information\r\n", len=56)
0x00005555556217fd in monitor_flush_locked (mon=mon@entry=0x555556251fd0)
0x0000555555621a12 in monitor_flush_locked (mon=0x555556251fd0)
monitor_puts (mon=mon@entry=0x555556251fd0, str=0x55555634bfa7 "", str@entry=0x55555634bf70 "QEMU 2.0.90 monitor - type 'help' for more information\n")
0x0000555555624359 in monitor_vprintf (mon=0x555556251fd0, fmt=<optimized out>, ap=<optimized out>)
0x0000555555624414 in monitor_printf (mon=<optimized out>, fmt=fmt@entry=0x5555559105a0 "QEMU %s monitor - type 'help' for more information\n")
0x0000555555629806 in monitor_event (opaque=0x555556251fd0, event=<optimized out>)
0x000055555571343c in qemu_chr_be_generic_open (s=0x555556248a30)
To avoid this, defer the call to an idle callback, which will be
called as soon as the main loop is re-entered. In order to simplify
the cleanup and do it in one place only, change pty_chr_close to
call pty_chr_state.
To reproduce, run with "-monitor pty", then try to read from the
slave /dev/pts/FOO that it creates.
Fixes: 9005b2a758
Reported-by: Li Liang <liangx.z.li@intel.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Forward chr_add_watch call from mux chardev to underlying
implementation.
This should fix bug #1335444
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since commit cdaa86a54b
("Add G_IO_HUP handler for socket chardev")
GLib limitation results in a bug on Windows host. Steps to reproduce:
Start qemu: qemu-system-i386 -qmp tcp:127.0.0.1:4444:server:nowait
Connect with telnet: telnet 127.0.0.1 4444
Try sending some data from telnet.
Expected result: answers from QEMU.
Observed result: no answers (actually tcp_chr_read is not called at all).
Due to GLib limitations it is not possible to create several watches on one
channel on Windows hosts. See bug #338943 in GNOME bugzilla for details:
https://bugzilla.gnome.org/show_bug.cgi?id=338943
This reimplements commit cdaa86a54b
("Add G_IO_HUP handler for socket chardev") using a single watch:
Handle G_IO_HUP in tcp_chr_read instead. It is already watched by a
corresponding watch. Remove the second watch with its handler.
Cc: Antonios Motakis <a.motakis@virtualopensystems.com>
Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Nikita Belov <zodiac@ispras.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In addition to the on-line reporting added in the previous patch, allow
libvirt to query frontend state independently of events.
Libvirt's path to identify the guest agent channel it cares about differs
between the event added in the previous patch and the QMP response field
added here. The event identifies the frontend device, by "id". The
'query-chardev' QMP command identifies the backend device (again by "id").
The association is under libvirt's control.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1080376
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Otherwise, Windows fails with a deadlock.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1403679897-11480-1-git-send-email-pbonzini@redhat.com
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1403683241-20678-1-git-send-email-imammedo@redhat.com
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will let threads other than the I/O thread raise QMP events.
GIOChannel is thread-safe, and send and receive state is usually
well-separated. The only driver that requires some care is the
pty driver, where some of the state is shared by the read and write
sides. That state is protected with the chr_write_lock too.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Make the mux always go through qemu_chr_fe_write, so that we'll get
the mutex for the underlying chardev.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The next patch will modify this function to initialize state that is
common to all backends.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit c76bf6bb8f ("Add chardev API
qemu_chr_fe_get_msgfds") extended the get_msgfds API from one to
multiple file descriptors. It forgot to close unused file descriptors
before freeing the file descriptor array.
This patch prevents a file descriptor leak if the tcp_get_msgfds()
callers requests fewer file descriptors than are available.
Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit c76bf6bb8f ("Add chardev API
qemu_chr_fe_get_msgfds") broke qemu_chr_fe_get_msgfd() because it
changed the return value.
Callers expect -1 if no fd is available. The commit changed the return
value to 0 (which is a valid file descriptor number) so callers always
detected a file descriptor even if none was available.
This patch fixes qemu-iotests 045:
$ cd tests/qemu-iotests && ./check 045
[...]
+FAIL: test_add_fd_invalid_fd (__main__.TestFdSets)
+----------------------------------------------------------------------
+Traceback (most recent call last):
+ File "./045", line 123, in test_add_fd_invalid_fd
+ self.assert_qmp(result, 'error/class', 'GenericError')
+ File "/home/stefanha/qemu/tests/qemu-iotests/iotests.py", line 232, in assert_qmp
+ result = self.dictpath(d, path)
+ File "/home/stefanha/qemu/tests/qemu-iotests/iotests.py", line 211, in dictpath
+ self.fail('failed path traversal for "%s" in "%s"' % (path, str(d)))
+AssertionError: failed path traversal for "error/class" in "{u'return': {u'fdset-id': 2, u'fd': 0}}"
Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
move generic chardev APIs to sysemu/char.h, to make them available to
callers which can not depend on the whole of ui/console.h.
This fixes a build error on systems without pixman-devel:
./configure --disable-tools --disable-docs --target-list=arm-linux-user
...
pixman none
...
make
...
In file included from
/data/home/nchip/linaro/qemu/include/ui/console.h:4:0,
from /data/home/nchip/linaro/qemu/stubs/vc-init.c:2:
/data/home/nchip/linaro/qemu/include/ui/qemu-pixman.h:14:20: fatal
error: pixman.h: No such file or directory
#include <pixman.h>
^
compilation terminated.
Reported-by: Riku Voipio <riku.voipio@iki.fi>
Tested-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1403508500-32691-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is used to detect that the remote end has disconnected. Just call
tcp_char_disconnect on receiving this event.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This extends the existing qemu_chr_fe_get_msgfd by allowing to read a set
of fds. The function for receiving the fds - unix_process_msgfd is extended
to allocate the needed array size.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will set an array of file descriptors to the internal structures.
The next time a message is send the array will be send as ancillary
data. This feature works on the UNIX domain socket backend only.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This function will attempt to read data from the chardev trying
to fill the buffer up to the given length.
Add tcp_chr_disconnect to reuse disconnection code where needed.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When trying to use a ivshmem server with qemu, ivshmem init code tries to
create a CharDriverState object for each eventfd retrieved from the server.
To create this object, a call to qemu_chr_open_eventfd() is done.
Right after this, before adding a frontend, qemu_chr_fe_claim_no_fail() is
called.
qemu_chr_open_eventfd() does not set avail_connections to 1, so no frontend can
be associated because qemu_chr_fe_claim_no_fail() makes qemu stop right away.
This problem comes from 456d606923
"qemu-char: Call fe_claim / fe_release when not using qdev chr properties".
Fix this, by setting avail_connections to 1 in qemu_chr_open_eventfd().
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Export chr_is_ringbuf() function. Also remove left-over function prototypes
while at it.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Character backend open hasn't been fully converted to the Error API.
Some opens fail without setting an error. qmp_chardev_add() needs to
detect when that happens, and set a generic error. Explain that in a
comment, and inline error_is_set() for clarity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
