This patch adds the Vectory Polynomial Multiply Sum instructions
introduced in Power ISA Version 2.07:
- Vectory Polynomial Multiply Sum Byte (vpmsumb)
- Vectory Polynomial Multiply Sum Halfword (vpmsumh)
- Vectory Polynomial Multiply Sum Word (vpmsumw)
- Vectory Polynomial Multiply Sum Doubleword (vpmsumd)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Gather Bits by Bytes Doubleword (vgbbd)
instruction which is introduced in Power ISA Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Compare Doubleword instructions introduced
by Power ISA Version 2.07:
- Vector Compare Equal to Unsigned Doubleword (vcmpequd)
- Vector Compare Greater Than Signed Doubleword (vcmpgtsd)
- Vector Compare Greater Than Unsigned Doubleword (vcmpgtud)
These instructions are encoded with bit 31 set to 1 and so are duals with
vcmpeqfp, vcmpgtfp and vcmpbfp respectively.
The helper macro for integer compares is enhanced to account for 64-bit
operands.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Bit Permute Quadword (vbpermq) instruction
introduced in Power ISA Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the vector doublword rotate and shift instructions
introduced in Power ISA Version 2.07:
- Vector Rotate Left Doubleword instruction (vrld)
- Vector Shift Left Doubleword (vsld)
- Vector Shift Right Doubleword (vsrd)
- Vector Shift Right Algegbraic Doubleword (vsrad)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Merge Even Word (vmrgew) and Vector
Merge Odd Word (vmrgow) instructions introduced in Power ISA
Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Unpack Signed Word instructions introduced in
Power ISA Version 2.07:
- Vector Unpack High Signed Word (vupkusw)
- Vector Unpack Low Signed Word (vupklsw)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Pack Doubleword instructions introduced in
Power ISA Version 2.07:
- Vector Pack Signed Doubleword Signed Saturate (vpksdss)
- Vector Pack Signed Doubleword Unsigned Saturate (vpksdus)
- Vector Pack Unsigned Doubleword Unsigned Modulo (vpkudum)
- Vector Pack Unsigned Doubleword Unsigned Saturate (vpkudus)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Minimum and Maximum Doubleword instructions
that are introduced in Power ISA Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Population Count instructions introduced in Power
ISA Version 2.07: vpopcntb, vpopcnth, vpopcntw and vpopcntd.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Count Leading Zeroes instructions introduced
in Power ISA Version 2.07 - vclzb, vclzh, vclzw and vclzd.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Multiply Unsigned Word Modulo (vmuluwm)
instruction.
The existing VARITH_DO macro is re-used to (trivially) instantiate
the helper code.
Since bits 21-31 of any vmuluwm instruction is 137, the instruction
is coded as a dual to vmulouw (bits 21-31 = 136).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Multilpy Even/Odd Word instructions that are introduced
in Power ISA Version 2.07:
- Vector Multiply Even Unsigned Word (vmuleuw)
- Vector Multiply Even Signed Word (vmulesw)
- Vector Multiply Odd Unsigned Word (vmulouw)
- Vector Multiply Odd Signed Word (vmulosw)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds two Altivec unsigned doublword modulo instructions that
are introduced in Power ISA Version V2.07:
- vaddudm : Vector Add Unsigned Doubleword Modulo
- vsubudm : Vector Subtrace Unsigned Doubleword Modulo
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Logical Instructions that are introduced
in Power ISA Version 2.07: veqv, vnand and vorc.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Some Alitvec instructions introduced in Power ISA Version 2.07 use bit 31
(aka the "Rc" bit) as an opcode but also use bit 21 as an actual Rc
bit. QEMU for PowerPC typically uses bits 0-5 and 21-30 for opcodes.
This patch introduces a generator macro that injects an auxiliary handler
which decodes both bits 21 and 31 and invokes one of four standard
handlers. Since the instructions are not, in general, from the same version
of the ISA, two sets of PPC_*/PPC2_* flags are supported.
This patch also introduces a macro to insert two entries into the opcode
table -- one for bit 21 equal to 0 and one for bit 21 equal to 1.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a macro to insert an entry into the opcode table for Altivec
Power ISA Version 2.07 instructions. The macro is similar to the GEN_VXFORM macro
except that it tags the entry with the PPC2_ALTIVEC_207 flag rather than
PPC_ALTIVEC.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Some Alitvec instructions introduced in Power ISA Version 2.07 use bit 31
(aka the "Rc" bit) as an opcode bit. However, QEMU for PowerPC uses
bits 0-5 and 21-30 for opcodes and not bit 31.
This patch introduces macros that will handle this situation by injecting
an auxiliary handler which decodes bit 31 in invokes one of two standard
handlers. Since the instructions are not, in general, from the same version
of the ISA, two sets of PPC_*/PPC2_* instruction tags are supported.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds generator macro for Altivec instructions that have 3
source AVR operands. The macro is similar to the 2 operand form.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Store Quadword Conditionl (stqcx.) instruction
which is introduced in Power ISA 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: fix compile error when !TARGET_PPC64]
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load Quadword and Reserve (lqarx) instruction,
which is new in Power ISA 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds support for the Store Quadword instruction in user mode. Prior
to Power ISA 2.07, stq was legal only in privileged mode. Support for Little
Endian mode is also new in ISA 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Book I (user space) Load Quadword (lq) instruction.
This instruction was introduced into Book I in Power ISA V2.07. Previous
versions of the architecture supported this as a privileged instruction.
Previous versions of the architecture also did not support Little Endian
mode.
Note that this patch also adds the PPC_64BX flag to the Power8 model,
which enables the lq instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a boolean function is_user_mode that can be re-used
in translation code that is sensitive to the MSR[PR] (user-mode)
state.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Branch Conditional to Address Register (bctar)
instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The existing implementation of xxpermdi is defective if the target
VSR is also a source VSR. This patch fixes the defect in this case
but also preserves the simpler, two TCG operation implementation
when the target is not once of the two sources.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Load Floating Point as Integer Word and
Zero Indexed (lfiwzx) instruction which was introduced in
Power ISA 2.06.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Floating Point Test for Square Root instruction
which was introduced in Power ISA 2.06.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Floating Point Test for Divide instruction which
was introduced in Power ISA 2.06B.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the fcfids, fcfidu and fcfidus instructions which
were introduced in Power ISA 2.06B. A common macro is provided to
eliminate repetitious code, and the existing fcfid instruction is
refactored to use this macro.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the four floating point to integer conversion instructions
introduced by Power ISA V2.06:
- Floating Convert to Integer Word Unsigned (fctiwu)
- Floating Convert to Integer Word Unsigned with Round Toward
Zero (fctiwuz)
- Floating Convert to Integer Doubleword Unsigned (fctidu)
- Floating Convert to Integer Doubleword Unsigned with Round
Toward Zero (fctiduz)
A common macro is developed to eliminate repetitious code. Existing instructions
are also refactoried to use this macro (fctiw, fctiwz, fctid, fctidz).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the byte and halfword variants of the Store Conditional
instructions. A common macro is introduced and the existing implementations
of stwcx. and stdcx. are refactored to use this macro.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the byte and halfword variants of the Load and
Reserve instructions. Since there is much commonality among
all forms of Load and Reserve, a macro is provided and the existing
implementations of lwarx and ldarx are refactoried to use this
macro.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch addes the signed Divide Word Extended instructions
which were introduced in Power ISA 2.06B.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch addes the Unsigned Divide Word Extended instructions
which were introduced in Power ISA 2.06B.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Divide Doubleword Extended instructions.
The implementation builds on the unsigned helper provided in
the previous patch.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Divide Doubleword Extended Unsigned
instructions. This instruction requires dividing a 128-bit
value by a 64 bit value. Since 128 bit integer division is
not supported in TCG, a helper is used. An architecture
independent 128-bit division routine is added to host-utils.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[agraf: use ||]
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Bit Permute Doubleword (bpermd) instruction,
which was introduced in Power ISA 2.06 as part of the base 64-bit
architecture.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the non-signalling scalar conversion instructions:
- VSX Scalar Convert Single Precision to Double Precision
Non-Signalling (xscvspdpn)
- VSX Scalar Convert Double Precision to Single Precision
Non-Signalling (xscvdpspn)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Round to Single Precision (xsrsp)
instruction.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Floating Merge Even Word (fmrgew) and Floating
Merge Odd Word (fmrgow) instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Move To VSR instructions (mfvsrd, mfvsrwz)
and Move From VSR instructions (mtvsrd, mtvsrwa, mtvsrwz). These
instructions are unusual in that they are considered a floating
point instruction if the indexed VSR is in the first half of the
array (0-31) but they are considered vector instructions if the
indexed VSR is in the second half of the array (32-63).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patchs adds the VSX Logical instructions that are new with
ISA V2.07:
- VSX Logical Equivalence (xxleqv)
- VSX Logical NAND (xxlnand)
- VSX Logical ORC (xxlorc)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Convert Unsigned Integer Doubleword
to Floating Point Format and Round to Single Precision (xscvuxdsp)
and VSX Scalar Convert Signed Integer Douglbeword to Floating Point
Format and Round to Single Precision (xscvsxdsp) instructions.
The existing integer to floating point conversion macro (VSX_CVT_INT_TO_FP)
is modified to support the rounding of the intermediate floating point
result to single precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Single Precision VSX Scalar Fused Multiply-Add
instructions: xsmaddasp, xsmaddmsp, xssubasp, xssubmsp, xsnmaddasp,
xsnmaddmsp, xsnmsubasp, xsnmsubmsp.
The existing VSX_MADD() macro is modified to support rounding of the
intermediate double precision result to single precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Reciprocal Square Root Estimate
Single Precision (xsrsqrtesp) instruction.
The existing VSX_RSQRTE() macro is modified to support rounding
of the intermediate double-precision result to single precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Square Root Single Precision (xssqrtsp)
instruction.
The existing VSX_SQRT() macro is modified to support rounding of the
intermediate double-precision result to single-precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the VSX Scalar Reciprocal Estimate Single Precision
(xsresp) instruction.
The existing VSX_RE macro is modified to support rounding of the
intermediate double precision result to single precision.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
