checkfilename() doesn't always set $acpi_testexpected. Fix the following
warning:
Use of uninitialized value $acpi_testexpected in string eq at
./scripts/checkpatch.pl line 1529.
Fixes: d2f1af0e41 ("checkpatch: don't emit warning on newly created acpi data files")
Cc: isaku.yamahata@intel.com
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <161786467973.295167.5612704777283969903.stgit@bahia.lan>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Place all files that can be useful to rebuild the Coverity
configuration in scripts/coverity-scan: the existing model
file, and the components setup.
The Markdown syntax was tested with Pandoc (but in any case
is meant more as a human-readable reference than as a part
of documentation).
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an option to drop caches before each test run. It may probably
improve reliability of results when testing in cached mode.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Add arguments to set number of test runs per table cell and to disable
initial run that is not counted in results.
It's convenient to set --count 1 --no-initial-run to fast run test
onece, and to set --count to some large enough number for good
precision of the results.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Add support for qcow2 source. New option says to use test-source.qcow2
instead of test-source. Of course, test-source.qcow2 should be
precreated.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
We should not report success if there is an error in final event.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Allow benchmark with different kinds of target cache.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
statistics.stdev raises if sequence length is less than two. Support
that case by hand.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Sometimes one of cells in a testing table runs too slow. And we really
don't want to wait so long. Limit number of runs in this case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
This patch fixes the update-binfmts templates being used in the script
scripts/qemu-binfmt-conf.sh when the option --debian is used.
Fixed issues are:
- Typo in flag 'credentials' (previously 'credential').
- Missing flags 'preserve' and 'fix_binary'.
Reference: https://manpages.debian.org/buster/binfmt-support/update-binfmts.8.en.html#FORMAT_FILES
Signed-off-by: Silvano Cirujano Cuesta <silvano.cirujano-cuesta@siemens.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210323123457.23747-1-silvano.cirujano-cuesta@siemens.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Rather than force all structure members to be 'int',
allow the type of the member to be specified.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow '64' to be specified for the instruction width command line params
and use the appropriate extract and deposit functions in that case.
This will be used to implement the new 64-bit Power ISA 3.1 instructions.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Message-Id: <CP2PR80MB3668E123E2EFDB0ACD3A46F1DA759@CP2PR80MB3668.lamprd80.prod.outlook.com>
[rth: Drop the change to the field type; use bitop_width instead of separate
variables for extract/deposit; use "ull" for 64-bit constants.]
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Form a hex constant of the appropriate insnwidth.
Begin using f-strings on changed lines.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No functional change.
Note: QAPISourceError's info parameter is Optional[] because schema.py
treats the info property of its various classes as Optional to
accommodate built-in types, which have no source. See prior commit
'qapi/error: assert QAPISourceInfo is not None'.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Keeping it in error.py will create some cyclic import problems when we
add types to the QAPISchemaParser. Callers don't need to know the
details of QAPIParseError unless they are parsing or dealing directly
with the parser, so this won't create any harsh new requirements for
callers in the general case.
Update error.py with a little docstring that gives a nod to where the
error may now be found.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Built-in stuff is not parsed from a source file, and therefore have no
QAPISourceInfo. If such None info was used for reporting an error,
built-in stuff would be broken. Programming error. Instead of reporting
a confusing error with bogus source location then, we better crash.
We currently crash only if self.col was set. Assert that self.info is
not None in order to crash reliably.
We can not yet change the type of the initializer to prove this cannot
happen at static analysis time before the remainder of the code is fully
typed.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It's already treated as optional, with one direct caller and some
subclass callers passing 'None'. Make it officially optional, which
requires moving the position of the argument to come after all required
parameters.
QAPISemError becomes functionally identical to QAPISourceError. Keep the
name to preserve its semantic meaning and avoid code churn, but remove
the now-useless __init__ wrapper.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-4-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Missed in commit 2cae67bcb5 "qapi: Use super() now we have Python 3".
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210421192233.3542904-3-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename QAPIError to QAPISourceError, and then create a new QAPIError
class that serves as the basis for all of our other custom exceptions,
without specifying any class properties.
This leaves QAPIError as a package-wide error class that's suitable for
any current or future errors.
(Right now, we don't have any errors that DON'T also want to specify a
Source location, but this MAY change. In these cases, a common abstract
ancestor would be desired.)
Add docstrings to explain the intended function of each error class.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421192233.3542904-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-18-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It is -- maybe -- possibly -- three nanoseconds faster.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-17-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now with more :words:!
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-16-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Per list review: qapi-code-gen.txt reserves suffixes Kind and
List only for type names, but the code rejects them for events and
commands, too.
It turns out we reject them earlier anyway: In check_name_upper() for
event names, and in check_name_lower() for command names.
Still, adjust the code for clarity over what precisely we are guarding
against.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-15-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-13-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is a small rewrite to address some minor style nits.
Don't compare against the empty list to check for the empty condition, and
move the normalization forward to unify the check on the now-normalized
structure.
With the check unified, the local nested function isn't needed anymore
and can be brought down into the normal flow of the function. With the
nesting level changed, shuffle the error strings around a bit to get
them to fit in 79 columns.
Note: although ifcond is typed as Sequence[str] elsewhere, we *know* that
the parser will produce real, bona-fide lists. It's okay to check
isinstance(ifcond, list) here.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-12-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Annotations do not change runtime behavior.
This commit *only* adds annotations.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is a minor adjustment that lets parameters @required and
@optional take tuple arguments, in particular (). Later patches will
make use of that.
(Iterable would also have worked, but Iterable also includes things like
generator expressions which are consumed upon iteration, which would
require a rewrite to make sure that each input was only traversed
once. Collection implies the "can re-iterate" property.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-10-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Casts are instructions to the type checker only, they aren't "safe" and
should probably be avoided in general. In this case, when we perform
type checking on a nested structure, the type of each field does not
"stick".
(See PEP 647 for an example of "type narrowing" that does "stick".
It is available in Python 3.10, so we can't use it yet.)
We don't need to assert that something is a str if we've already checked
or asserted that it is -- use a cast instead for these cases.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Prior to this commit, specifying a non-object value here causes the QAPI
parser to crash in expr.py with a stack trace with (likely) an
AttributeError when we attempt to call that value's items() method.
This member needs to be an object (Dict), and not anything else. Add a
check for this with a nicer error message, and formalize that check with
new test cases that exercise that error.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For readability purposes only, shimmy the early return upwards to the
top of the function, so cases proceed in order from least to most
complex.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
mypy isn't fond of allowing you to check for bool membership in a
collection of str elements. Guard this lookup for precisely when we were
given a name.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
mypy does not know the types of values stored in Dicts that masquerade
as objects. Help the type checker out by constraining the type.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
OrderedDict is a subtype of dict, so we can check for a more general
form. These functions do not themselves depend on it being any
particular type.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-4-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The function can just use the argument from the scope above. Otherwise,
we get shadowed argument errors because the parameter name clashes with
the name of a variable already in-scope.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210421182032.3521476-3-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The linter yaps after 0825f62c84. Fix this trivial issue to restore the
linter baseline.
(Yes, ideally -- and soon -- the linter will be part of CI so we don't
clutter up the log with fixups. For now, though, the baseline is useful
for testing intermediate commits as types are added to the QAPI
library.)
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210421182032.3521476-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Recent QEMU versions now sometimes exit cleanly with an error message
that a bus is not available for a specified device. Don't flag those
as an error in the device-crash-test script.
Message-Id: <20210323164718.1393792-1-thuth@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some packaged versions of Sphinx (fedora33/alpine so far) have issues
with the annotated C code that kernel-doc spits out. Without knowing
about things like QEMU_PLUGIN_EXPORT it chokes trying to understand
the code. Evidently this is a problem for the kernel as well as the
long stream of regex substitutions we add to in this patch can attest.
Fortunately we have a fairly common format for all our compiler
shenanigans as applied to functions so lets just filter them all out.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323165308.15244-2-alex.bennee@linaro.org>
Union branch names should use '-', not '_'. Enforce this. The only
offenders are in tests/. Fix them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-29-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message typo fixed]
Enum members should use '-', not '_'. Enforce this. Fix the fixable
offenders (all in tests/), and add the remainder to pragma
member-name-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Struct members, including command arguments, event data, and union
inline base members, should use '-', not '_'. Enforce this. Fix the
fixable offenders (all in tests/), and add the remainder to pragma
member-name-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-27-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Command names should be lower-case. Enforce this. Fix the fixable
offenders (all in tests/), and add the remainder to pragma
command-name-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-25-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Feature names should use '-', not '_'. Enforce this.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Command names and member names within a type should be all lower case
with words separated by a hyphen. We also accept underscore. Rework
check_name_lower() to optionally reject underscores, but don't use
that option, yet.
Update expected test output for the changed error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-23-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Rename pragma returns-whitelist to command-returns-exceptions, and
name-case-whitelist to member-name-case-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-20-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-17-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Type names should be CamelCase. Enforce this. The only offenders are
in tests/. Fix them. Add test type-case to cover the new error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Regexp simplified, new test made more robust]
Event names should be ALL_CAPS with words separated by underscore.
Enforce this. The only offenders are in tests/. Fix them. Existing
test event-case covers the new error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-14-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We require lowercase __RFQDN_ downstream prefixes only where we
require the prefixed name to be lowercase. Don't; permit any case in
__RFQDN_ prefixes anywhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-13-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
check_name_lower() is the only user of check_name_str() using
permit_upper=False. Move the associated code from check_name_str() to
check_name_lower(), and drop the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-12-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Naming rules differ for the various kinds of names. To prepare
enforcing them, define functions to check them: check_name_upper(),
check_name_lower(), and check_name_camel(). For now, these merely
wrap around check_name_str(), but that will change shortly. Replace
the other uses of check_name_str() by appropriate uses of the
wrappers. No change in behavior just yet.
check_name_str() now returns the name without downstream and x-
prefix, for use by the wrappers in later patches. Requires tweaking
regexp @valid_name. It accepts the same strings as before.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-11-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message improved]
check_name_str() masks leading digits when passed enum_member=True.
Only check_enum() does. Lift the masking into check_enum().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-10-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Flat union branch names match the tag enum's member names. Omitted
branches default to "no members for this tag value".
Branch names starting with a digit get rejected like "'data' member
'0' has an invalid name". However, omitting the branch works.
This is because flat union tag values get checked twice: as enum
member name, and as union branch name. The former accepts leading
digits, the latter doesn't.
Branches whose names start with a digit therefore cannot have members.
Feels wrong. Get rid of the restriction by skipping the latter check.
This can expose c_name() to input it can't handle: a name starting
with a digit. Improve it to return a valid C identifier for any
input.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message rewritten]
check_type() fails to reject optional members with reserved names,
because it neglects to strip off the leading '*'. Fix that.
The stripping in check_name_str() is now useless. Drop.
Also drop the "no leading '*'" assertion, because valid_name.match()
ensures it can't fail.
Fixes: 9fb081e0b9
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-8-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This policy rejects deprecated input, and thus permits "testing the
future". Implement it for QMP command arguments: reject commands with
deprecated ones. Example: when QEMU is run with -compat
deprecated-input=reject, then
{"execute": "eject", "arguments": {"device": "cd"}}
fails like this
{"error": {"class": "GenericError", "desc": "Deprecated parameter 'device' disabled by policy"}}
When the deprecated parameter is removed, the error will change to
{"error": {"class": "GenericError", "desc": "Parameter 'device' is unexpected"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-11-armbru@redhat.com>
This policy rejects deprecated input, and thus permits "testing the
future". Implement it for QMP commands: make deprecated ones fail.
Example: when QEMU is run with -compat deprecated-input=reject, then
{"execute": "query-cpus"}
fails like this
{"error": {"class": "CommandNotFound", "desc": "Deprecated command query-cpus disabled by policy"}}
When the deprecated command is removed, the error will change to
{"error": {"class": "CommandNotFound", "desc": "The command query-cpus has not been found"}}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-10-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP event data: suppress
deprecated members.
No QMP event data is deprecated right now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-6-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP events: suppress
deprecated ones.
No QMP event is deprecated right now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-5-armbru@redhat.com>
This policy suppresses deprecated bits in output, and thus permits
"testing the future". Implement it for QMP command results. Example:
when QEMU is run with -compat deprecated-output=hide, then
{"execute": "query-cpus-fast"}
yields
{"return": [{"thread-id": 9805, "props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "qom-path": "/machine/unattached/device[0]", "cpu-index": 0, "target": "x86_64"}]}
instead of
{"return": [{"arch": "x86", "thread-id": 22436, "props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "qom-path": "/machine/unattached/device[0]", "cpu-index": 0, "target": "x86_64"}]}
Note the suppression of deprecated member "arch".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210318155519.1224118-4-armbru@redhat.com>
The 'scsi-hd' and 'scsi-cd' devices provide suitable alternatives.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'ide-hd' and 'ide-cd' devices provide suitable alternatives.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, bash and C crash reproducers are be built manually. This is a
problem, as we want to integrate reproducers into the tree, for
regression testing. This patch adds a script that converts a sequence of
QTest commands into a pasteable Bash reproducer, or a libqtest-based C
program. This will try to wrap pasteable reproducers to 72 chars, but
the generated C code will not have nice formatting. Therefore, the C
output of this script should be piped through an auto-formatter, such as
clang-format
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The pvrdma code relies on the pvrdma_ring.h kernel header for some
basic ring buffer handling. The content of that header isn't very
exciting, but contains some (q)atomic_*() invocations that (a)
cause manual massaging when doing a headers update, and (b) are
an indication that we probably should not be importing that header
at all.
Let's reimplement the ring buffer handling directly in the pvrdma
code instead. This arguably also improves readability of the code.
Importing the header can now be dropped.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Tested-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add --preserve-argv0 in qemu-binfmt-conf.sh to configure the preserve-argv0
flag.
This patch allows to use new flag in AT_FLAGS to detect if
preserve-argv0 is configured for this interpreter:
argv[0] (the full pathname provided by binfmt-misc) is removed and
replaced by argv[1] (the original argv[0] provided by binfmt-misc when
'P'/preserve-arg[0] is set)
For instance with this patch and kernel support for AT_FLAGS:
$ sudo chroot m68k-chroot sh -c 'echo $0'
sh
without this patch:
$ sudo chroot m68k-chroot sh -c 'echo $0'
/usr/bin/sh
The new flag is available in kernel (v5.12) since:
2347961b11d4 ("binfmt_misc: pass binfmt_misc flags to the interpreter")
This can be tested with something like:
# cp ..../qemu-ppc /chroot/powerpc/jessie
# qemu-binfmt-conf.sh --qemu-path / --systemd ppc --credential yes \
--persistent no --preserve-argv0 yes
# systemctl restart systemd-binfmt.service
# cat /proc/sys/fs/binfmt_misc/qemu-ppc
enabled
interpreter //qemu-ppc
flags: POC
offset 0
magic 7f454c4601020100000000000000000000020014
mask ffffffffffffff00fffffffffffffffffffeffff
# chroot /chroot/powerpc/jessie sh -c 'echo $0'
sh
# qemu-binfmt-conf.sh --qemu-path / --systemd ppc --credential yes \
--persistent no --preserve-argv0 no
# systemctl restart systemd-binfmt.service
# cat /proc/sys/fs/binfmt_misc/qemu-ppc
enabled
interpreter //qemu-ppc
flags: OC
offset 0
magic 7f454c4601020100000000000000000000020014
mask ffffffffffffff00fffffffffffffffffffeffff
# chroot /chroot/powerpc/jessie sh -c 'echo $0'
/bin/sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210222105004.1642234-1-laurent@vivier.eu>
Follow the inclusive terminology from the "Conscious Language in your
Open Source Projects" guidelines [*] and replace the words "whitelist"
appropriately.
[*] https://github.com/conscious-lang/conscious-lang-docs/blob/main/faq.md
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210303184644.1639691-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This includes both input parameters (project id and commit) in the
message so to make it easier to debug returned API calls.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210222193240.921250-4-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When an HTTP GET request fails, it's useful to go beyond the "not
successful" message, and show the code returned by the server.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210222193240.921250-3-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This simply splits out the code that does an HTTP GET so that it
can be used for other API requests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210222193240.921250-2-crosa@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
"make check SPEED=slow" got lost in the conversion of the build
system to meson - the tests were always running in "quick" mode.
Fix it by passing the "-m" parameter to the test harness at the
right spot in scripts/mtest2make.py.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210218172313.2217440-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 9d55380b5a "qapi: Remove null from schema language" (v4.2.0)
neglected to update two error messages. Do that now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210224101442.1837475-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
* target/i386: Add bus lock debug exception support (Chenyi)
* update documentation for preferred boolean option syntax (Daniel)
* make SCSI io_timeout configurable (Hannes)
* fix handling of guest recoverable SCSI errors (myself)
* misc fixes (Pavel, Zheng Zhan Liang, Zihao)
* fix installation of binaries with entitlements (Akihiko)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmA3tzQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMsngf+OkbgTDouxq3qnn1K89n6j2wKlAj0
qPP+57o1sv5u5MjX0BkawXCMJfvTKJaOt/Cs8S0FaPTehfR5H0T2tL76KZBEdlEP
/+V3EC0Qmd1S47LKIOuDkV15szvnccyjpgwaL7Osjb0Eh0SxeXd4pBTc3yYtkacu
zb/srZ63U2iJZr93QwGmEJjuW57WNym6QWXF3Mrg9PFXybkXFTGumB2vZMlQc+MN
RWPTUKZKAiIr/HfdvpIETXY+HzJhylvIQ8OVWtM3XDorl48OWcOat/jyeNEVYgG3
o+gxIRnfvIL+42GkmUFbOKLzT5SV6p9EYYGLTuE1kU7nc6HWoD0CdPxA3A==
=UBVO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* fix --enable-fuzzing linker failures (Alexander)
* target/i386: Add bus lock debug exception support (Chenyi)
* update documentation for preferred boolean option syntax (Daniel)
* make SCSI io_timeout configurable (Hannes)
* fix handling of guest recoverable SCSI errors (myself)
* misc fixes (Pavel, Zheng Zhan Liang, Zihao)
* fix installation of binaries with entitlements (Akihiko)
# gpg: Signature made Thu 25 Feb 2021 14:41:56 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (29 commits)
tcg/i386: rdpmc: fix the the condtions
chardev: do not use short form boolean options in non-QemuOpts character device descriptions
vl: deprecate -writeconfig
target/i386: Add bus lock debug exception support
qom/object.c: Fix typo
target/i386: update to show preferred boolean syntax for -cpu
docs: update to show preferred boolean syntax for -cpu
docs: update to show preferred boolean syntax for -vnc
docs: update to show preferred boolean syntax for -chardev
qemu-options: update to show preferred boolean syntax for -vnc
qemu-options: update to show preferred boolean syntax for -incoming
qemu-options: update to show preferred boolean syntax for -netdev
qemu-options: update to show preferred boolean syntax for -spice
qemu-options: update to show preferred boolean syntax for -chardev
gdbstub: use preferred boolean option syntax
char: don't fail when client is not connected
scsi: drop 'result' argument from command_complete callback
scsi-disk: pass guest recoverable errors through even for rerror=stop
scsi-disk: pass SCSI status to scsi_handle_rw_error
scsi: introduce scsi_sense_from_errno()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-8-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before this change, the code signed during the build was installed
directly.
However, the signature gets invalidated because meson modifies the code
to fix dynamic library install names during the install process.
It also prevents meson to strip the code because the pre-signed file is
not marked as an executable (although it is somehow able to perform the
modification described above).
With this change, the unsigned code will be installed and modified by
meson first, and a script signs it later.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210225000614.46919-1-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no particular reason to keep this on it's own in the root of
the tree. Move it into the rest of the fine developer manual and fixup
any links to it. The only tweak I've made is to fix the code-block
annotations to mention the language C.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210223095931.16908-1-alex.bennee@linaro.org>
Newly created acpi data files(tests/data/acpi/) cause false positive
warning.
If file names are acpi expected file, don't emit warning.
Fixes: e625ba2a41 ("checkpatch: fix acpi check with multiple file name")
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <6899f9ad54cab8e7deca94ff0eeab641680e2b5e.1613615732.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Some other small gitlab-CI improvements
* Some qtest fixes
-----BEGIN PGP SIGNATURE-----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=SDf2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2021-02-19' into staging
* Always build the container images in the gitlab-CI
* Some other small gitlab-CI improvements
* Some qtest fixes
# gpg: Signature made Fri 19 Feb 2021 06:10:20 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2021-02-19:
travis.yml: Limit simultaneous jobs to 3
gitlab-ci.yml: Run check-tcg with TCI
tests/qtest/boot-sector: Check that the guest did not panic
gitlab-ci: Disable vhost-kernel in build-disable job
scripts/checkpatch: Improve the check for authors mangled by the mailing list
gitlab-ci: Display Avocado log content when tests timeout
gitlab: fix inconsistent indentation
gitlab: add fine grained job deps for all build jobs
gitlab: always build container images
tests/qtest/boot-serial-test: Test Virt machine with 'max'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There were recently some patches on the list which had their "From:"
line mangled like this:
From: qemu_oss--- via <qemu-devel@nongnu.org>
Since our test in the checkpatch.pl script did not trigger here, the
patches finally also ended up in a pull request, with the wrong author
set. So let's improve the regular expression to also complain on
these new patterns, too.
Message-Id: <20210216071512.1199827-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace "whitelist" in the device-crash-test script with
"rule list".
I'm using "rule list" instead of "allow list" or "pass list"
because the list is not used only for expected/allowed errors.
It also contain rules specifying which errors shouldn't be
ignored and/or should be fatal.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210202191207.4103973-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We don't need to create an empty, mutable list to pass to _gen_tree;
since it is now typed as a Sequence, we can use the empty tuple as a
default and omit the argument.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-19-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Optional[List] is clunky; an empty sequence can more elegantly convey
"no variants". By downgrading "List" to "Sequence", we can also accept
tuples; this is useful for the empty tuple specifically, which we may
use as a default parameter because it is immutable.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-18-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Doc string touched up]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
To reflect the work that went into strictly typing introspect.py,
punish myself by claiming credit.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-17-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
NB: The type aliases (SchemaInfo et al) declare intent for some of the
"dictly-typed" objects we pass around in introspect.py. They do not
enforce the shape of those objects, and cannot, until Python 3.7 or
later. (And even then, it may not be "worth it".)
Annotations are also added to the QAPISchemaEntity __init__ method in
schema.py to allow mypy to statically prove the type of typ.name,
needed to prove the return type of
QAPISchemaGenIntrospectVisitor._use_type().
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-15-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Note on QAPISchemaEntity.__init__() squashed into commit message,
Comment wrapped to conform to PEP 8]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It is easier to give a name to all of the dictly-typed objects we pass
around in introspect.py by removing this helper, as it does not return
an object that has any knowable type by itself.
Inline it into its only caller instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-14-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Subjective, but I find getting rid of the comprehensions helps. Also,
divide the sections into scalar and non-scalar sections, and remove
old-style string formatting.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-13-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Trivial; make the error message just a pinch more explicit in case we
trip this by accident in the future.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-12-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Presently, we use a tuple to attach a dict containing annotations
(comments and compile-time conditionals) to a tree node. This is
undesirable because dicts are difficult to strongly type; promoting it
to a real class allows us to name the values and types of the
annotations we are expecting.
In terms of typing, the Annotated<T> type serves as a generic container
where the annotated node's type is preserved, allowing for greater
specificity than we'd be able to provide without a generic.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The types will be used in forthcoming patches to add typing. These types
describe the layout and structure of the objects passed to
_tree_to_qlit, but lack the power to describe annotations until the next
commit.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-10-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This mimics how a typed object works, where 'if' and 'comment' are
always set, regardless of if they have a value set or not.
It is safe to do this because of the way that _tree_to_qlit processes
these values (using dict.get with a default of None), resulting in no
change of output from _tree_to_qlit. There are no other users of this
data.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is only used to pass in a dictionary with a comment already set, so
skip the runaround and just accept the (optional) comment.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Returning two different types conditionally can be complicated to
type. Return one type for consistency.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
_tree_to_qlit is called recursively on dict values (isolated from their
keys); at such a point in generating output it is too late to apply an
ifcond. Similarly, comments do not necessarily have a "tidy" place they
can be printed in such a circumstance.
Forbid this usage by renaming "suppress_first_indent" to "dict_value" to
emphasize that indents are suppressed only for the benefit of dict
values; then add an assertion assuring we do not pass ifcond/comments
in this case.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Comment wrapped to conform to PEP 8]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
_make_tree might receive a dict (a SchemaInfo object) or some other type
(usually, a string) for its obj parameter. Adding features information
should arguably be performed by the caller at such a time when we know
the type of the object and don't have to re-interrogate it.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
At present, we open-code this in _make_tree itself; but if the structure
of the tree changes, this is brittle. Use an explicit recursive call to
_make_tree when appropriate to help keep the interior node typing
consistent.
A consequence of doing this is that the 'ifcond' key of the features
dict will be omitted when ifcond is false-ish, just like it is omitted
in top-level calls to _make_tree. This also increases consistency in our
handling of this property.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-4-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The introspect visitor is stateful, but expects that it will have a
schema to refer to. Add assertions that state this.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-3-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add file to default-configs
Add hexagon to meson.build
Add hexagon to target/meson.build
Add target/hexagon/meson.build
Change scripts/qemu-binfmt-conf.sh
We can build a hexagon-linux-user target and run programs on
the Hexagon scalar core. With hexagon-linux-clang installed,
"make check-tcg" will pass.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-35-git-send-email-tsimpson@quicinc.com>
[rth: Use top-level python variable]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It does happen to be a list (as of now), but we can describe it in more
general terms with no loss in accuracy to allow tuples and other
constructs.
In the future, we can write "ifcond: Sequence[str] = ()" as a default
parameter, which we could not do safely with a Mutable type like a List.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210216021809.134886-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Implementation of Linux user emulation for Hexagon
Some common files modified in addition to new files in linux-user/hexagon
Acked-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-31-git-send-email-tsimpson@quicinc.com>
[rth: Fix termbits.h on review by Laurent]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Similarly to commit 8cdb2cef3f, move the gprof/gcov test to GitLab.
The coverage-summary.sh script is not Travis-CI specific, make it
generic.
[thuth: Add gcovr and bsdmainutils which are required for the
coverage-summary.sh script to the ubuntu docker file,
and use 'check' as test target]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20201108204535.2319870-10-philmd@redhat.com>
Message-Id: <20210211045455.456371-2-thuth@redhat.com>
Message-Id: <20210211122750.22645-2-alex.bennee@linaro.org>
qemu.org is running out of bandwidth and the QEMU project is moving
towards a gating CI on GitLab. Use the GitLab repos instead of qemu.org
(they will become mirrors).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210111115017.156802-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
v2
Dropped vmstate: Fix memory leak in vmstate_handle_alloc
Broke on Power
Added migration: only check page size match if RAM postcopy is enabled
-----BEGIN PGP SIGNATURE-----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=4tbe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210208a' into staging
Migration pull 2021-02-08
v2
Dropped vmstate: Fix memory leak in vmstate_handle_alloc
Broke on Power
Added migration: only check page size match if RAM postcopy is enabled
# gpg: Signature made Mon 08 Feb 2021 11:28:14 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20210208a: (27 commits)
migration: only check page size match if RAM postcopy is enabled
migration: introduce snapshot-{save, load, delete} QMP commands
iotests: fix loading of common.config from tests/ subdir
iotests: add support for capturing and matching QMP events
migration: introduce a delete_snapshot wrapper
migration: wire up support for snapshot device selection
migration: control whether snapshots are ovewritten
block: rename and alter bdrv_all_find_snapshot semantics
block: allow specifying name of block device for vmstate storage
block: add ability to specify list of blockdevs during snapshot
migration: stop returning errno from load_snapshot()
migration: Make save_snapshot() return bool, not 0/-1
block: push error reporting into bdrv_all_*_snapshot functions
migration: Display the migration blockers
migration: Add blocker information
migration: Fix a few absurdly defective error messages
migration: Fix cache_init()'s "Failed to allocate" error messages
migration: Clean up signed vs. unsigned XBZRLE cache-size
migration: Fix migrate-set-parameters argument validation
migration: introduce 'userfaultfd-wrlat.py' script
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Message-Id: <SYCPR01MB3502E9F6EB06DEDCD484F738FCBA9@SYCPR01MB3502.ausprd01.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the modules that we are checking so far, we can be stricter about the
difference between Optional[T] and T types. Enable that check.
Enabling it now will assist review on further typing and cleanup work.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-17-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For everything typed so far, type this parameter as
Optional[QAPISourceInfo].
In the most generic case, QAPISchemaEntity's info field may be None to
represent types that come from built-in definitions. Although some
Entity types may not currently have any built-in definitions, it is not
easily possible to constrain the type except on an ad-hoc basis using
assertions.
It's easier and simpler, then, to just say it's always an Optional type.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-16-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The previous commit removed the only user of QAPIGen(None). Tighten
the type hint.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-15-jsnow@redhat.com>
QAPISchemaGenCommandVisitor.visit_command() needs to generate the
marshalling function into the current module, and also generate its
registration into the ./init system module. The latter is done
somewhat awkwardly: .__init__() creates a QAPIGenCCode that will not
be written out, each .visit_command() adds its registration to it, and
.visit_end() copies its contents into the ./init module it creates.
Instead provide the means to temporarily switch to another module.
Create the ./init module in .visit_begin(), and generate its initial
part. Add registrations to it in .visit_command(). Finish it in
.visit_end().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-14-jsnow@redhat.com>
Many places assume they can access these fields without checking them
first to ensure they are defined. Eliminating the _genc and _genh fields
and replacing them with functional properties that check for correct
state can ease the typing overhead by eliminating the Optional[T] return
type.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-12-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use a constant to make it obvious we're referring to a very specific thing.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
With callers to _add_system_module now explicitly using the './' prefix
to indicate a system module, there is no longer any reason to have
separate interfaces for adding system vs user modules; use a unified
interface that differentiates based on the name.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-10-jsnow@redhat.com>
Use './builtin' as the built-in module name instead of
None. Clarify the typing that this is now always a string.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-9-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QAPISchemaModularCVisitor._add_system_module() prefixes './' to its name
argument to make it a module name. Pass the module name instead. This
will allow us to coalesce the methods to add modules later on.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-8-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message reworded]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QAPISchemaModularCVisitor._begin_system_module() is actually just for
the builtin module. Rename it to ._begin_builtin_module() and drop
its useless @name parameter.
Clarify conditionals in visit_module to make this clear.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-7-jsnow@redhat.com>
Define what a module is and define what kind of a module it is once and
for all, in one place.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We assert _start_if is not None in end_if, but that's opaque to mypy.
By inlining _wrap_ifcond, that constraint becomes provable to mypy.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Mypy cannot understand that this match can never be None, so help it
along.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-4-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Actually, the arg_type can indeed be Optional.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-3-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When boxed is True, expr.py asserts that we must have
arguments. Ultimately, this should mean that if boxed is True that
arg_type should be defined. Mypy cannot infer this, and does not support
'stateful' type inference, e.g.:
```
if x:
assert y is not None
...
if x:
y.etc()
```
does not work, because mypy does not statefully remember the conditional
assertion in the second block. Help mypy out by creating a new local
that it can track more easily.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210201193747.2169670-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There are some places where the conditional makefile support is the
simplest solution. Now we don't expose CONFIG_TCG as a variable create
a new one that can be checked for the check-help output.
As check-tcg is a PHONY target we re-use check-softfloat to gate that
as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210202134001.25738-13-alex.bennee@linaro.org>
Commit 4e66c9ef64 "tracetool: add input filename and line number to
Event" forgot to add a line number and a filename argument at one
build method call site.
Traceback (most recent call last):
File "./scripts/simpletrace.py", line 261, in <module>
run(Formatter())
File "./scripts/simpletrace.py", line 236, in run
process(events, sys.argv[2], analyzer, read_header=read_header)
File "./scripts/simpletrace.py", line 177, in process
dropped_event =
Event.build("Dropped_Event(uint64_t num_events_dropped)")
TypeError: build() missing 2 required positional arguments:
'lineno' and 'filename'
Add the missing arguments.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210131173415.3392-1-vr_qemu@t-online.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Timestamps in tracing output can be distracting. Make it possible to
control tid/timestamp printing with -msg timestamp=on|off. The default
is no tid/timestamps. Previously they were always printed.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210125113507.224287-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
macro is not reset after use, so the format decoded is always the
one of the first "PRI" in the format string.
For instance:
vhost_vdpa_set_config(void *dev, uint32_t offset, uint32_t size, \
uint32_t flags) "dev: %p offset: %"PRIu32" \
size: %"PRIu32" flags: 0x%"PRIx32
generates:
printf("%d@%d vhost_vdpa_set_config dev: %p offset: %u size: %u \
flags: 0x%u\n", pid(), gettimeofday_ns(), dev, offset, \
size, flags)
for the "flags" parameter, we can see a "0x%u" rather than a "0x%x"
because the first macro was "PRIu32" (for offset).
In the loop, macro becomes "PRIu32PRIu32PRIx32", and c_macro_to_format()
returns always macro[3] ('u' in this case). This patch resets macro after
the format has been decoded.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210105191721.120463-3-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
-----BEGIN PGP SIGNATURE-----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=g6bC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange-gitlab/tags/misc-fixes-pull-request' into staging
* Replace --enable/disable-git-update with --with-git-submodules
to allow improved control over use of git submodules
* Deprecate the -enable-fips option
* Ensure docs use prefer format for bool options
* Clarify platform support rules
* Misc fixes to keymap conversions
* Fix misc problems on macOS
# gpg: Signature made Fri 29 Jan 2021 17:10:13 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange-gitlab/tags/misc-fixes-pull-request:
tests: Replace deprecated ASN1 code
tests: Fix runtime error in test-authz-pam
ui: update keycodemapdb submodule commit
crypto: Add spaces around operator
configure: replace --enable/disable-git-update with --with-git-submodules
docs: fix missing backslash in certtool shell example
docs: simplify and clarify the platform support rules
Prefer 'on' | 'off' over 'yes' | 'no' for bool options
os: deprecate the -enable-fips option and QEMU's FIPS enforcement
crypto: Fix memory leaks in set_loaded for tls-*
crypto: Forbid broken unloading of secrets
crypto: Move USER_CREATABLE to secret_common base class
crypto: Fix some code style problems, add spaces around operator
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace the --enable-git-update and --disable-git-update configure params
with the param --with-git-submodules=(update|validate|ignore) to
allow 3 options for building from a git repo.
This is needed because downstream packagers, e.g. Debian, Ubuntu, etc,
also keep the source code in git, but do not want to enable the
'git_update' mode; with the current code, that's not possible even
if the downstream package specifies --disable-git-update.
The previous parameters are deprecated but still available; the
--enable-git-update parameter maps to --with-git-submodules=update and
--disable-git-update parameter maps to --with-git-submodules=validate.
The configure script behavior is slightly modified, where previously
the dtc, capstone, and slirp submodules were not validated when
--disable-git-update was specified (but were updated with git-update
enabled), now they are validated when using --with-git-submodules=validate
and are only ignored when using --with-git-submodules=ignore.
Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In macOS 11, QEMU only gets access to Hypervisor.framework if it has the
respective entitlement. Add an entitlement template and automatically self
sign and apply the entitlement in the build.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210116214705.822267-22-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Kernel commit a85cbe6159ff ("uapi: move constants from
<linux/kernel.h> to <linux/const.h>") breaks our script
because of the unrecognized include. Let's add that to
our processing.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210104202057.48048-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Without this checkpatch keeps complaining about new/changed files even
when MAINTAINERS has been updated. Normal invocations of checkpatch on
patch files rather than commit IDs are unaffected.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210114165730.31607-13-alex.bennee@linaro.org>
When decodetree.py was added in commit 568ae7efae, QEMU was
using Python 2 which happily reads UTF-8 files in text mode.
Python 3 requires either UTF-8 locale or an explicit encoding
passed to open(). Now that Python 3 is required, explicit
UTF-8 encoding for decodetree source files.
To avoid further problems with the user locale, also explicit
UTF-8 encoding for the generated C files.
Explicit both input/output are plain text by using the 't' mode.
This fixes:
$ /usr/bin/python3 scripts/decodetree.py test.decode
Traceback (most recent call last):
File "scripts/decodetree.py", line 1397, in <module>
main()
File "scripts/decodetree.py", line 1308, in main
parse_file(f, toppat)
File "scripts/decodetree.py", line 994, in parse_file
for line in f:
File "/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 80:
ordinal not in range(128)
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210110000240.761122-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This script first runs the regular gdb's 'bt' command, and then if we are in a
coroutine it prints the coroutines backtraces in the order in which they
were called.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201217155436.927320-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code that dumps the stack frame works like that:
* save current registers
* overwrite current registers (including rip/rsp) with coroutine snapshot
in the jmpbuf
* print backtrace
* restore the saved registers.
If the user has currently selected a non topmost stack frame in gdb,
the above code will still restore the selected frame registers,
but the gdb will then lose the selected frame index, which makes it impossible
to switch back to frame 0, to continue debugging the executable.
Therefore switch temporarily to the topmost frame of the stack
for the above code.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201217155436.927320-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If previous write commands write the same length of data with the same step,
we view it as a hint.
Signed-off-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <SYCPR01MB3502480AD07811A6A49B8FEAFCAB0@SYCPR01MB3502.ausprd01.prod.outlook.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
-M1: remove IO commands iteratively
-M2: try setting bits in operand of write/out to zero
Signed-off-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <SYCPR01MB350204C52E7A39E6B0EEC870FCAB0@SYCPR01MB3502.ausprd01.prod.outlook.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Simplifying the crash cases by opportunistically setting bits in operands of
out/write to zero may help to debug, since usually bit one means turn on or
trigger a function while zero is the default turn-off setting.
Tested bug https://bugs.launchpad.net/qemu/+bug/1908062
Signed-off-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <SYCPR01MB3502C84B6346A3E3DE708C7BFCAB0@SYCPR01MB3502.ausprd01.prod.outlook.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now we use a one-time scan and remove strategy in the minimizer,
which is not suitable for timing dependent instructions.
For example, instruction A will indicate an address where the config
chunk locates, and instruction B will make the configuration active.
If we have the following instruction sequence:
...
A1
B1
A2
B2
...
A2 and B2 are the actual instructions that trigger the bug.
If we scan from top to bottom, after we remove A1, the behavior of B1
might be unknowable, including not to crash the program. But we will
successfully remove B1 later cause A2 and B2 will crash the process
anyway:
...
A1
A2
B2
...
Now one more trimming will remove A1.
In the perfect case, we would need to be able to remove A and B (or C!) at
the same time. But for now, let's just add a loop around the minimizer.
Since we only remove instructions, this iterative algorithm is converging.
Tested with Bug 1908062.
Signed-off-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <SYCPR01MB350263004448040ACCB9A9F1FCAB0@SYCPR01MB3502.ausprd01.prod.outlook.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, we split the write commands' data from the middle. If it does not
work, try to move the pivot left by one byte and retry until there is no
space.
But, this method has two flaws:
1. It may fail to trim all unnecessary bytes on the right side.
For example, there is an IO write command:
write addr uuxxxxuu
u is the unnecessary byte for the crash. Unlike ram write commands, in most
case, a split IO write won't trigger the same crash, So if we split from the
middle, we will get:
write addr uu (will be removed in next round)
write addr xxxxuu
For xxxxuu, since split it from the middle and retry to the leftmost byte
won't get the same crash, we will be stopped from removing the last two
bytes.
2. The algorithm complexity is O(n) since we move the pivot byte by byte.
To solve the first issue, we can try a symmetrical position on the right if
we fail on the left. As for the second issue, instead moving by one byte, we
can approach the boundary exponentially, achieving O(log(n)).
Give an example:
xxxxuu len=6
+
|
+
xxx,xuu 6/2=3 fail
+
+--------------+-------------+
| |
+ +
xx,xxuu 6/2^2=1 fail xxxxu,u 6-1=5 success
+ +
+------------------+----+ |
| | +-------------+ u removed
+ +
xx,xxu 5/2=2 fail xxxx,u 6-2=4 success
+
|
+-----------+ u removed
In some rare cases, this algorithm will fail to trim all unnecessary bytes:
xxxxxxxxxuxxxxxx
xxxxxxxx-xuxxxxxx Fail
xxxx-xxxxxuxxxxxx Fail
xxxxxxxxxuxx-xxxx Fail
...
I think the trade-off is worth it.
Signed-off-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <SYCPR01MB3502D26F1BEB680CBBC169E5FCAB0@SYCPR01MB3502.ausprd01.prod.outlook.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
