Add LoongArch flatted device tree, adding cpu device node, firmware cfg node,
pcie node into it, and create fdt rom memory region. Now fdt info is not
full since only uefi bios uses fdt, linux kernel does not use fdt.
Loongarch Linux kernel uses acpi table which is full in qemu virt
machine.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220712083206.4187715-7-yangxiaojuan@loongson.cn>
[rth: Set TARGET_NEED_FDT, add fdt to meson.build]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We should result zero when exception is invalid and operation is nan
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20220716085426.3098060-4-gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We should config cpucfg[20] to set value for the scache's ways, sets,
and size arguments when loongarch cpu init. However, the old code
wirte 'sets argument' twice, so we change one of them to 'size argument'.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220715064829.1521482-1-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The boundary size of cpucfg array should be 0 to ARRAY_SIZE(cpucfg)-1.
So, using index bigger than max boundary to access cpucfg[] must be
forbidden.
Fix coverity CID: 1489760
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220715060740.1500628-6-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix out-of-bounds errors when access excp_names[] array. the valid
boundary size of excp_names should be 0 to ARRAY_SIZE(excp_names)-1.
However, the general code do not consider the max boundary.
Fix coverity CID: 1489758
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220715060740.1500628-4-yangxiaojuan@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The cpu_model argument may already have the '-loongarch-cpu' suffix,
e.g. when using the default for the LS7A1000 machine. If that fails,
try again with the suffix. Validate that the object created by the
function is derived from the proper base class.
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220715060740.1500628-2-yangxiaojuan@loongson.cn>
[rth: Try without and then with the suffix, to avoid testsuite breakage.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
According to PowerISA 3.1B, Book III 6.7.6 programming note, the
page directory base addresses are expected to be aligned to their
size. Real hardware seems to rely on that and will access the
wrong address if they are misaligned. This results in a
translation failure even if the page tables seem to be properly
populated.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220628133959.15131-4-leandro.lupori@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Check if the number and size of Radix levels are valid on
POWER9/POWER10 CPUs, according to the supported Radix Tree
Configurations described in their User Manuals.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220628133959.15131-3-leandro.lupori@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Check if partition and process tables are properly aligned, in
their size, according to PowerISA 3.1B, Book III 6.7.6 programming
note. Hardware and KVM also raise an exception in these cases.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220628133959.15131-2-leandro.lupori@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When using "-machine none", env->tb_env is not allocated, causing the
segmentation fault reported in issue #85 (launchpad bug #811683). To
avoid this problem, check if the pointer != NULL before calling the
methods to print TBU/TBL/DECR.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/85
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220714172343.80539-1-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Equivalent to CHK_SV and CHK_HV, but can be used in decodetree methods.
Reviewed-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Lucas Coutinho <lucas.coutinho@eldorado.org.br>
Message-Id: <20220701133507.740619-3-lucas.coutinho@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
GEN_PRIV and related CHK_* macros just assumed that variable named
"ctx" would be in scope when they are used, and that it would be a
pointer to DisasContext. Change these macros to receive the pointer
explicitly.
Reviewed-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Lucas Coutinho <lucas.coutinho@eldorado.org.br>
Message-Id: <20220701133507.740619-2-lucas.coutinho@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This initial version supports the invalidation of one or all
TLB entries. Flush by PID/LPID, or based in process/partition
scope is not supported, because it would make using the
generic QEMU TLB implementation hard. In these cases, all
entries are flushed.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220712193741.59134-3-leandro.lupori@eldorado.org.br>
[danielhb: moved 'set' declaration to TLBIE_RIC_PWC block]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Also decode RIC, PRS and R operands.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220712193741.59134-2-leandro.lupori@eldorado.org.br>
[danielhb: mark bit 31 in @X_tlbie pattern as ignored]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The 'error' argument of gen_inval_exception will be or-ed with
POWERPC_EXCP_INVAL, so it should always be a constant prefixed with
POWERPC_EXCP_INVAL_. No functional change is intended,
spr_write_excp_vector is only used by register_BookE_sprs, and
powerpc_excp_booke ignores the lower 4 bits of the error code on
POWERPC_EXCP_INVAL exceptions.
Also, take the opportunity to replace printf with qemu_log_mask.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220627141104.669152-7-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A call to "gen_(hv)priv_exception" should use POWERPC_EXCP_PRIV_* as the
'error' argument instead of POWERPC_EXCP_INVAL_*, and POWERPC_EXCP_FU is
an exception type, not an exception error code. To correctly set
FSCR[IC], we should raise Facility Unavailable with this exception type
and IC value as the error code.
Fixes: 565cb10967 ("target/ppc: add user read/write functions for MMCR0")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220627141104.669152-6-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
POWERPC_EXCP_INVAL should only be or-ed with other constants prefixed
with POWERPC_EXCP_INVAL_. Also, take the opportunity to move both
helpers under #if !defined(CONFIG_USER_ONLY) as the instructions that
use them are privileged.
No functional change is intended, the lower 4 bits of the error code are
ignored by all powerpc_excp_* methods on POWERPC_EXCP_INVAL exceptions.
Reported-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220627141104.669152-5-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The only PowerPC implementations with these insns were the 460 and 460F,
which had their definitions removed in [1].
[1] 7ff26aa6c6 ("target/ppc: Remove unused PPC 460 and 460F definitions")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220627141104.669152-4-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Testing on a POWER9 DD2.3, we observed that the Linux kernel delivers a
signal with si_code ILL_PRVOPC (5) when a userspace application tries to
use slbfee. To obtain this behavior on linux-user, we should use
POWERPC_EXCP_PRIV with POWERPC_EXCP_PRIV_OPC.
No functional change is intended for softmmu targets as
gen_hvpriv_exception uses the same 'exception' argument
(POWERPC_EXCP_HV_EMU) for raise_exception_*, and the powerpc_excp_*
methods do not use lower bits of the exception error code when handling
POWERPC_EXCP_{INVAL,PRIV}.
Reported-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220627141104.669152-3-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The code in linux-user/ppc/cpu_loop.c expects POWERPC_EXCP_PRIV
exception with error POWERPC_EXCP_PRIV_OPC or POWERPC_EXCP_PRIV_REG,
while POWERPC_EXCP_INVAL_SPR is expected in POWERPC_EXCP_INVAL
exceptions. This mismatch caused an EXCP_DUMP with the message "Unknown
privilege violation (03)", as seen in [1].
[1] https://gitlab.com/qemu-project/qemu/-/issues/588
Fixes: 9b2fadda3e ("ppc: Rework generation of priv and inval interrupts")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/588
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220627141104.669152-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some systems have /proc/device-tree/cpus/../clock-frequency. However,
this is not the expected path for a CPU device tree directory.
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220712210810.35514-1-muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The architecture requires that for faults on loads and stores which
do writeback, the syndrome information does not have the ISS
instruction syndrome information (i.e. ISV is 0). We got this wrong
for the load and store instructions covered by disas_ldst_reg_imm9().
Calculate iss_valid correctly so that if the insn is a writeback one
it is false.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1057
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220715123323.1550983-1-peter.maydell@linaro.org
In regime_tcr() we return the appropriate TCR register for the
translation regime. For Secure EL2, we return the VSTCR_EL2 value,
but in this translation regime some fields that control behaviour are
in VTCR_EL2. When this code was originally written (as the comment
notes), QEMU didn't care about any of those fields, but we have since
added support for features such as LPA2 which do need the values from
those fields.
Synthesize a TCR value by merging in the relevant VTCR_EL2 fields to
the VSTCR_EL2 value.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1103
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-8-peter.maydell@linaro.org
Change the representation of the TCR_EL* registers in the CPU state
struct from struct TCR to uint64_t. This allows us to drop the
custom vmsa_ttbcr_raw_write() function, moving the "enforce RES0"
checks to their more usual location in the writefn
vmsa_ttbcr_write(). We also don't need the resetfn any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-7-peter.maydell@linaro.org
Change the representation of the VSTCR_EL2 and VTCR_EL2 registers in
the CPU state struct from struct TCR to uint64_t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-6-peter.maydell@linaro.org
We have a bug in our handling of accesses to the AArch32 VTCR
register on big-endian hosts: we were not adjusting the part of the
uint64_t field within TCR that the generated code would access. That
can be done with offsetoflow32(), by using an ARM_CP_STATE_BOTH cpreg
struct, or by defining a full set of read/write/reset functions --
the various other TCR cpreg structs used one or another of those
strategies, but for VTCR we did not, so on a big-endian host VTCR
accesses would touch the wrong half of the register.
Use offsetoflow32() in the VTCR register struct. This works even
though the field in the CPU struct is currently a struct TCR, because
the first field in that struct is the uint64_t raw_tcr.
None of the other TCR registers have this bug -- either they are
AArch64 only, or else they define resetfn, writefn, etc, and
expect to be passed the full struct pointer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-5-peter.maydell@linaro.org
The only caller of regime_tcr() is now regime_tcr_value(); fold the
two together, and use the shorter and more natural 'regime_tcr'
name for the new function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-4-peter.maydell@linaro.org
In get_level1_table_address(), instead of using precalculated values
of mask and base_mask from the TCR struct, calculate them directly
(in the same way we currently do in vmsa_ttbcr_raw_write() to
populate the TCR struct fields).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-3-peter.maydell@linaro.org
The regime_tcr() function returns a pointer to a struct TCR
corresponding to the TCR controlling a translation regime. The
struct TCR has the raw value of the register, plus two fields mask
and base_mask which are used as a small optimization in the case of
32-bit short-descriptor lookups. Almost all callers of regime_tcr()
only want the raw register value. Define and use a new
regime_tcr_value() function which returns only the raw 64-bit
register value.
This is a preliminary to removing the 32-bit short descriptor
optimization -- it only saves a handful of bit operations, which is
tiny compared to the overhead of doing a page table walk at all, and
the TCR struct is awkward and makes fixing
https://gitlab.com/qemu-project/qemu/-/issues/1103 unnecessarily
difficult.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220714132303.1287193-2-peter.maydell@linaro.org
The documentation for PROT_MTE says that it cannot be cleared
by mprotect. Further, the implementation of the VM_ARCH_CLEAR bit,
contains PROT_BTI confiming that bit should be cleared.
Introduce PAGE_TARGET_STICKY to allow target/arch/cpu.h to control
which bits may be reset during page_set_flags. This is sort of the
opposite of VM_ARCH_CLEAR, but works better with qemu's PAGE_* bits
that are separate from PROT_* bits.
Reported-by: Vitaly Buka <vitalybuka@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220711031420.17820-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were only checking for SVE disabled and not taking into
account PSTATE.SM to check SME disabled, which resulted in
vectors being incorrectly truncated.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220713045848.217364-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When PSTATE.SM, VL = SVL even if SVE is disabled.
This is visible in kselftest ssve-test.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220713045848.217364-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass through RDPID and RDTSCP support in CPUID if host supports it.
Correctly detect if CPU_BASED_TSC_OFFSET and CPU_BASED2_RDTSCP would
be supported in primary and secondary processor-based VM-execution
controls. Enable RDTSCP in secondary processor controls if RDTSCP
support is indicated in CPUID.
Signed-off-by: Cameron Esfahani <dirty@apple.com>
Message-Id: <20220214185605.28087-7-f4bug@amsat.org>
Tested-by: Silvio Moioli <moio@suse.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1011
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Inline these macros into the only two callers.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220628111701.677216-9-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
With semihosting_get_arg, we already have a check vs argc, so
there's no point replicating it -- just check the result vs NULL.
Merge copy_argn_to_target into its caller.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-8-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Always log the assert locally. Do not report_fault, but
instead include the fact of the fault in the assertion.
Don't bother freeing allocated strings before the abort().
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-6-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use semihost_sys_write and/or qemu_semihosting_console_write
for implementing plog. When using gdbstub, copy the temp
string below the stack so that gdb has a guest address from
which to perform the log.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-5-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This separates guest file descriptors from host file descriptors,
and utilizes shared infrastructure for integration with gdbstub.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220628111701.677216-4-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
