hmp() passes its string argument through the sprintf() family;
with a proper attribute, gcc -Wformat warns us when we do something
dangerous like passing a non-constant format string. Fortunately,
all our strings were safe, but checking whether the string can
contain an unintended % is easy to avoid and therefore worth doing.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Prior to commit 063c23d9, we were tracking a list of parallel
qtest objects, in order to safely clean up a SIGABRT handler
only after the last connection quits. But when we switched to
more of glib's infrastructure, the list became dead code that
is never assigned to.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Don't open-code something that has a convenient helper available.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Back when the test was introduced, in commit 62c39b307, the
test was set up to run qemu-ga directly on the host performing
the test, and defaults to limiting itself to safe commands. At
the time, it was envisioned that setting QGA_TEST_SIDE_EFFECTING
in the environment could cover a few more commands, while noting
the potential danger of those side effects running in the host.
But this has NEVER been tested: if you enable the environment
variable, the test WILL fail. One obvious reason: if you are not
running as root, you'll probably get a permission failure when
trying to freeze the file systems, or when changing system time.
Less obvious: if you run the test as root (wow, you're brave), you
could end up hanging if the test tries to log things to a
temporarily frozen filesystem. But the cutest reason of all: if
you get past the above hurdles, the test uses invalid JSON in
test_qga_fstrim() (missing '' around the dictionary key 'minimum'),
and will thus fail an assertion in qmp_fd().
Rather than leave this untested time-bomb in place, rip it out.
Hopefully, as originally envisioned, we can find an opportunity
to test an actual sandboxed guest where the guest-agent has
full permissions and will not unduly affect the host running
the test - if so, 'git revert' can be used if desired, for
salvaging any useful parts of this attempt.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Broken with commit b4ba67d9a7 ("libqos: Change PCI accessors to take
opaque BAR handle") a while ago, but nobody noticed since the tests are
not run by default: The msix_pba_bar is not correctly initialized
anymore if bir_pba has the same value as bir_table. With this fix,
"make check SPEED=slow" should work fine again.
Fixes: b4ba67d9a7
Tested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The user can currently still cause an abort() if running certain tests
(like the prom-env-test) without setting the QTEST_QEMU_BINARY first.
A similar problem has been fixed with commit 7c933ad61b
already, but forgot to also take care of the qtest_get_arch() function,
so let's introduce a proper wrapper around getenv("QTEST_QEMU_BINARY")
that can be used in both locations now.
Buglink: https://bugs.launchpad.net/qemu/+bug/1713434
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The problem with puv3 has been fixed with 0ac241bcf9
('unicore32: abort when entering "x 0" on the monitor') and the problem
with tricore_testboard has been fixed with b190f477e2
('qemu-system-tricore: segfault when entering "x 0" on the monitor').
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A lot of tests provide code for adding and removing a device via the
device_add and device_del QMP commands. Maintaining this code in so many
places is cumbersome and error-prone (some of the code parts check the
responses for device deletion in an incorrect way, for example, we've got
to deal with both, error code and DEVICE_DEL event here). So let's provide
some proper generic functions for adding and removing a device instead.
The code for correctly unplugging a device has been taken from a patch
from Peter Xu.
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
and add a test case of dump-guest-memory without
"[begin length]" parameters.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20170913142036.2469-5-lvivier@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit e10e798c85 switched to libvhost-user which lacked support
for resuming the avail_idx based on used_idx.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1485867
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Daniel P. Berrange: [0/2] Fix / skip recent iotests with LUKS driver
- Eric Blake: [0/3] nbd: Use common read/write-all qio functions
-----BEGIN PGP SIGNATURE-----
Comment: Public key at http://people.redhat.com/eblake/eblake.gpg
iQEcBAABCAAGBQJZsBGjAAoJEKeha0olJ0NqVRoH/iiNEB2SlZFFl5W++wf3Ekq/
lvtZjK3rxpvRXvy6LiRsYVs27Etc8E9aSw2UK6aaqgA3qR8g3zdmwUZb9w3slkeI
OXedt0fS5IpQ4UP0ORUBb/LgyOgW3uA0UjHBTEAKl0SyvFPx+TrTZXxqQUqlAc9A
lFaA0g71xvfqWWhXmt0PQjRr9bBEpe+4L4NgOypa+Z3xbBAektx390S8N/b/P8fC
FNwAqBPTY5XAgJGnEhL9EUOdUWnVgoyG1MR63puJzULYi+2+TlpR2w030qRif75b
h7TqYUvwKLnoqMyhBb5LmyhcqwNdphz/1DsEudk18XGuvC94WYkopC3rT7TPWLs=
=vGUc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2017-09-06' into staging
nbd patches for 2017-09-06
- Daniel P. Berrange: [0/2] Fix / skip recent iotests with LUKS driver
- Eric Blake: [0/3] nbd: Use common read/write-all qio functions
# gpg: Signature made Wed 06 Sep 2017 16:17:55 BST
# gpg: using RSA key 0xA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2017-09-06:
nbd: Use new qio_channel_*_all() functions
io: Add new qio_channel_read{, v}_all_eof functions
io: Yield rather than wait when already in coroutine
iotests: blacklist 194 with the luks driver
iotests: rewrite 192 to use _launch_qemu to fix LUKS support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJZsEDbAAoJEAUWMx68W/3nxcwQAKNhcpoAKbcwQn5s9aOcR1Nd
9pTV/5ucfPI9rMo0cC1JKgVoJVhx1rXwyVuohC/+jZBLHjgTrN8yivo4WLiCEyFx
0DH4v1Lp/cnvhpNOUisda17lD9Josroi0GF13bbjvyKnyCnOOTEDwn/3YJZdwH2u
AkWVS+WwRPPqmqHfvjUiEfDyO8SXpk635eoHqLVrS1I5+uykPKxSqJAwZmEGnf5Y
y+k+VnIq1pVRt/6C/mw4tm1ZVjzeKm77AGMlnMIAvT9/n5TfolMlpSha9RG86avf
4QgJIA5duaWNj8Kt7LsnGmBUKndNgY2eFDV3IJA9ke5x9FkrO3S02W4LT1/4N4MU
P/art2z+jtKWVzxvdmz9S1fEKnmE44ULCbLJRVucoK5lYEgDdAfapO6Duq/hf+JW
jWeaiNlF/oJrMZH89HdJt25iGYBcYuwg1vc6QlGMQ0zHzFYw2xV2z3V3raHUUQD8
74iJeSM7O2oVTzgfeOBNpKVpVqQLPEY2B9vK8slZtUNsiziQjaWufuzYfn7Mi7kU
JZ29vfLx+3mK6Ateq/diQgHuJsWxM2LDe2DlhwBgmSjEFzWK/q8Eg/AzX+O4xDvv
Kd5KVpc+N7nFwiWRScplibPgFmzSHzAack8Kwi5s1JPj63kJcuR56hWQaJ9d4uA7
k5SN9mduPLVP2zkDGH53
=lrj8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170906a' into staging
migration pull 2017-09-06
# gpg: Signature made Wed 06 Sep 2017 19:39:23 BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20170906a:
migration: dump str in migrate_set_state trace
snapshot/tests: Try loadvm twice
migration: Reset rather than destroy main_thread_load_event
runstate/migrate: Two more transitions
host-utils: Simplify pow2ceil()
host-utils: Proactively fix pow2floor(), switch to unsigned
xbzrle: Drop unused cache_resize()
migration: Report when bdrv_inactivate_all fails
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than open-coding our own read/write-all functions, we
can make use of the recently-added qio code. It slightly
changes the error message in one of the iotests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170905191114.5959-4-eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
It's legal to loadvm twice, modify the existing save/loadvm test
to do it twice.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170825141940.20740-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just make sure that nr_tables is size_t not int.
Once there, do the assert in the right place and be sure that we don't
have a division by zero.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
--
Drop the s/g_new0/g_malloc0/ change.
Avoid division by zero with assert (danp)
We were using -1 instead of the real size because the functions check
what is bigger, size in bytes or the size of the iov. Recent gcc's
barf at this.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
--
Remove comments about this feature.
Fix missing -1.
The 194 test has a lot of code that assumes a simple image file. Rewriting
this to work with luks is possible, but non-trivial, so blacklist the
luks format for now.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170901105434.3288-3-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Fam Zheng <famz@redhat.com>
[eblake: commit message typo fixed]
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The LUKS driver requires extra args to QEMU to setup passwords.
The _launch_qemu function takes care of this, so convert the
test to use this function and use correct -drive syntax
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20170901105434.3288-2-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
tests/vhost-user-test keeps failing on build-system since Aug 15:
ERROR:tests/vhost-user-test.c:835:test_flags_mismatch: child process (/i386/vhost-user/flags-mismatch/subprocess [4836]) failed unexpectedly
...
ERROR:tests/vhost-user-test.c:807:test_connect_fail: child process (/x86_64/vhost-user/connect-fail/subprocess [58910]) failed unexpectedly
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170905180602.28698-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ThrottleGroup is converted to an object. This will allow the future
throttle block filter drive easy creation and configuration of throttle
groups in QMP and cli.
A new QAPI struct, ThrottleLimits, is introduced to provide a shared
struct for all throttle configuration needs in QMP.
ThrottleGroups can be created via CLI as
-object throttle-group,id=foo,x-iops-total=100,x-..
where x-* are individual limit properties. Since we can't add non-scalar
properties in -object this interface must be used instead. However,
setting these properties must be disabled after initialization because
certain combinations of limits are forbidden and thus configuration
changes should be done in one transaction. The individual properties
will go away when support for non-scalar values in CLI is implemented
and thus are marked as experimental.
ThrottleGroup also has a `limits` property that uses the ThrottleLimits
struct. It can be used to create ThrottleGroups or set the
configuration in existing groups as follows:
{ "execute": "object-add",
"arguments": {
"qom-type": "throttle-group",
"id": "foo",
"props" : {
"limits": {
"iops-total": 100
}
}
}
}
{ "execute" : "qom-set",
"arguments" : {
"path" : "foo",
"property" : "limits",
"value" : {
"iops-total" : 99
}
}
}
This also means a group's configuration can be fetched with qom-get.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
timer_cb() needs to know about the current Aio context of the throttle
request that is woken up. In order to make ThrottleGroupMember backend
agnostic, this information is stored in an aio_context field instead of
accessing it from BlockBackend.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit eliminates the 1:1 relationship between BlockBackend and
throttle group state. Users will be able to create multiple throttle
nodes, each with its own throttle group state, in the future. The
throttle group state cannot be per-BlockBackend anymore, it must be
per-throttle node. This is done by gathering ThrottleGroup membership
details from BlockBackendPublic into ThrottleGroupMember and refactoring
existing code to use the structure.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The TLS I/O channel test had mistakenly used && instead
of || when checking for handshake completion. As a
result it could terminate the handshake process before
it had actually completed. This was harmless before but
changes in GNUTLS 3.6.0 exposed this bug and caused the
test suite to fail.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
These functions wait until they are able to read / write the full
requested data buffer(s).
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Switch from atexit.register() to a more elegant idiom of declaring
resources in a with statement:
with FilePath('monitor.sock') as monitor_path,
VM() as vm:
...
The files and VMs will be automatically cleaned up whether the test
passes or fails.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170824072202.26818-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The scratch/ (TEST_DIR) directory is not automatically cleaned up after
test execution. It is the responsibility of tests to remove any files
they create.
A nice way of doing this is to declare files at the beginning of the
test and automatically remove them with a context manager:
with iotests.FilePath('test.img') as img_path:
qemu_img(...)
qemu_io(...)
# img_path is guaranteed to be deleted here
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170824072202.26818-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that all usages have been converted to user lookup helpers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-14-marcandre.lureau@redhat.com>
[Rebased, superfluous local variable dropped, missing
check-qom-proplist.c update added]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-17-git-send-email-armbru@redhat.com>
Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.
The sentinel will be dropped next.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
The next commit will put it to use. May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Currently, the FOO_lookup[] generated for QAPI enum types are
terminated by a NULL sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, replace "have we reached the sentinel?"
predicates by "have we reached the FOO__MAX value?" predicates.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-12-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The lookup tables have a sentinel, no need to make callers pass their
size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-3-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Rebased, commit message corrected]
We check that all members of the QLit list are also in the QList. We
neglect to check the other direction. Fix that.
While there, use QLIST_FOREACH_ENTRY() to simplify the code and break
the loop on the first mismatch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170825105913.4060-13-marcandre.lureau@redhat.com>
[Commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We check that all members of the QLit dictionary are also in the
QDict. We neglect to check the other direction.
Comparing the number of members suffices, because QDict can't
contain duplicate members, and putting duplicates in a QLit is a
programming error.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170825105913.4060-12-marcandre.lureau@redhat.com>
[Commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make it more obvious about the expected return values.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170825105913.4060-7-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
compare_litqobj_to_qobj() lacks a qlit_ prefix. Moreover, "compare"
suggests -1, 0, +1 for less than, equal and greater than. The
function actually returns non-zero for equal, zero for unequal.
Rename to qlit_equal_qobject().
Its return type will be cleaned up in the next patch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170825105913.4060-6-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rename from LiteralQ to QLit.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170825105913.4060-4-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix code style issues while at it, to please checkpatch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170825105913.4060-3-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A command is a query if it has no side effect and yields a result.
Such commands are typically named query-FOO, but there are exceptions.
The basic idea is to find candidates with query-qmp-schema, filter out
the ones that aren't queries with an explicit blacklist, and test the
remaining ones against a QEMU with no special arguments.
The current blacklist is just add-fd.
The test can't do queries with arguments, because it knows nothing
about the arguments. No coverage for query-cpu-model-baseline,
query-cpu-model-comparison, query-cpu-model-expansion, query-rocker,
query-rocker-ports, query-rocker-of-dpa-flows, and
query-rocker-of-dpa-groups.
Most tested commands are expected to succeed. The test does not check
the return value then.
query-balloon and query-vm-generation-id are expected to fail because
they need a virtio-balloon / vmgenid device to succeed, and this test
is too dumb to set one up. Could be addressed later.
query-acpi-ospm-status and query-hotpluggable-cpus are expected to
fail because they require features provided only by special machine
types, and this test is too dumb to set that up. Could also be
addressed later.
Several commands may either be functional or stubs that always fail,
depending on build configuration. Ideally, the stubs shouldn't be in
query-qmp-schema, but that requires QAPI schema compile-time
configuration, which we don't have, yet. Until we do, we need to
figure out whether a command is a stub. When we have a suitable
CONFIG_FOO preprocessor symbol is available, use that. Else,
simply blacklist the command for now.
We get basic test coverage for the following commands, except as
noted:
qom-list-types
query-acpi-ospm-status (expected to fail)
query-balloon (expected to fail)
query-block
query-block-jobs
query-blockstats
query-chardev
query-chardev-backends
query-command-line-options
query-commands
query-cpu-definitions (blacklisted for now)
query-cpus
query-dump
query-dump-guest-memory-capability
query-events
query-fdsets
query-gic-capabilities (blacklisted for now)
query-hotpluggable-cpus (expected to fail)
query-iothreads
query-kvm
query-machines
query-memdev
query-memory-devices
query-mice
query-migrate
query-migrate-cache-size
query-migrate-capabilities
query-migrate-parameters
query-name
query-named-block-nodes
query-pci (blacklisted for now)
query-qmp-schema
query-rx-filter
query-spice
query-status
query-target
query-tpm
query-tpm-models
query-tpm-types
query-uuid
query-version
query-vm-generation-id (expected to fail)
query-vnc
query-vnc-servers
query-xen-replication-status
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1502461148-10154-1-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Typos in code under #ifndef and in the commit message fixed]
The test-io-channel-tls test was mistakenly using two of the
same directories as test-crypto-tlssession. This causes a
sporadic failure when using make -j$BIGNUM.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
GNUTLS 3.6.0 marked SHA1 as untrusted for certificates.
Unfortunately the gnutls_x509_crt_sign() method we are
using to create certificates in the test suite is fixed
to always use SHA1. We must switch to a different method
and explicitly ask for SHA256.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
$ make check-speed
tests/benchmark-crypto-hash.c: In function 'test_hash_speed':
tests/benchmark-crypto-hash.c:44:5: error: format '%ld' expects argument of type 'long int', but argument 2 has type 'size_t' [-Werror=format=]
g_print("Testing chunk_size %ld bytes ", chunk_size);
^
tests/benchmark-crypto-hash.c: In function 'main':
tests/benchmark-crypto-hash.c:62:9: error: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' [-Werror=format=]
snprintf(name, sizeof(name), "/crypto/hash/speed-%lu", i);
^
cc1: all warnings being treated as errors
rules.mak:66: recipe for target 'tests/benchmark-crypto-hash.o' failed
make: *** [tests/benchmark-crypto-hash.o] Error 1
Reviewed-by: Longpeng(Mike) <longpeng@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The conflict check added by commit c0644771 ("qapi: Reject
alternates that can't work with keyval_parse()") doesn't work
with the following declaration:
{ 'alternate': 'Alt',
'data': { 'one': 'bool',
'two': 'str' } }
It crashes with:
Traceback (most recent call last):
File "./scripts/qapi-types.py", line 295, in <module>
schema = QAPISchema(input_file)
File "/home/ehabkost/rh/proj/virt/qemu/scripts/qapi.py", line 1468, in __init__
self.exprs = check_exprs(parser.exprs)
File "/home/ehabkost/rh/proj/virt/qemu/scripts/qapi.py", line 958, in check_exprs
check_alternate(expr, info)
File "/home/ehabkost/rh/proj/virt/qemu/scripts/qapi.py", line 830, in check_alternate
% (name, key, types_seen[qtype]))
KeyError: 'QTYPE_QSTRING'
This happens because the previously-seen conflicting member
('one') can't be found at types_seen[qtype], but at
types_seen['QTYPE_BOOL'].
Fix the bug by moving the error check to the same loop that adds
new items to types_seen, raising an exception if types_seen[qt]
is already set.
Add two additional test cases that can detect the bug.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170717180926.14924-1-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>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=jCiK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/tidy-pull-request' into staging
# gpg: Signature made Thu 31 Aug 2017 11:29:33 BST
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/tidy-pull-request: (29 commits)
eepro100: replace g_malloc()+memcpy() with g_memdup()
test-iov: replace g_malloc()+memcpy() with g_memdup()
i386: replace g_malloc()+memcpy() with g_memdup()
i386: introduce ELF_NOTE_SIZE macro
decnumber: use DIV_ROUND_UP
kvm: use DIV_ROUND_UP
i386/dump: use DIV_ROUND_UP
ppc: use DIV_ROUND_UP
msix: use DIV_ROUND_UP
usb-hub: use DIV_ROUND_UP
q35: use DIV_ROUND_UP
piix: use DIV_ROUND_UP
virtio-serial: use DIV_ROUND_UP
console: use DIV_ROUND_UP
monitor: use DIV_ROUND_UP
virtio-gpu: use DIV_ROUND_UP
vga: use DIV_ROUND_UP
ui: use DIV_ROUND_UP
vnc: use DIV_ROUND_UP
vvfat: use DIV_ROUND_UP
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
iQEcBAABAgAGBQJZp8cdAAoJEJykq7OBq3PIyeQIALXlHMTJM+I2dfUZfkIYFrEk
Euf0z1URMJ9k5hKy1kIhAVlmGWs2fB1snTCm9tZjCtPqMjH5EDWb8z+zrqmorpcQ
LyIccYdT/XrFeU1x+n4PlhaubQKXiAfZbUbgZpbkZwGgX0k51gx3V9z1smHme6AX
CIODhgotqbJ0Hy2kuAP8TM2OPgx1tcyel34GuT5e3Rrb8nL0QfHfG4nxcpWBB0q8
iipoJfBvKWpRV0azSg+s51x1FFcB3iDKr81uBVABOyLtVW13nF6EMRIP76rqy5qp
relNDo6kdmh0W19motNPjOa4BhnPQakEfF+bdARBOJPbXsFzd5X193yQBKW+nq4=
=5ltA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Thu 31 Aug 2017 09:21:49 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
qcow2: allocate cluster_cache/cluster_data on demand
qemu-doc: Add UUID support in initiator name
tests: migration/guestperf Python 2.6 argparse compatibility
docker.py: Python 2.6 argparse compatibility
scripts: add argparse module for Python 2.6 compatibility
misc: Remove unused Error variables
oslib-posix: Print errors before aborting on qemu_alloc_stack()
throttle: Test the valid range of config values
throttle: Make burst_length 64bit and add range checks
throttle: Make LeakyBucket.avg and LeakyBucket.max integer types
throttle: Remove throttle_fix_bucket() / throttle_unfix_bucket()
throttle: Make throttle_is_valid() a bit less verbose
throttle: Update the throttle_fix_bucket() documentation
throttle: Fix wrong variable name in the header documentation
nvme: Fix get/set number of queues feature, again
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I found these pattern via grepping the source tree. I don't have a
coccinelle script for it!
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Refactor nbd_read_eof to return 1 on success, 0 on eof, when no
data was read and <0 for other cases, because returned size of
read data is not actually used.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-3-vsementsov@virtuozzo.com>
[eblake: tweak function comments, rebase to test 083 enhancements]
Signed-off-by: Eric Blake <eblake@redhat.com>
083 only tests TCP. Some failures might be specific to UNIX domain
sockets.
A few adjustments are necessary:
1. Generating a port number and waiting for server startup is
TCP-specific. Use the new nbd-fault-injector.py startup protocol to
fetch the address. This is a little more elegant because we don't
need netstat anymore.
2. The NBD filter does not work for the UNIX domain sockets URIs we
generate and must be extended.
3. Run all tests twice: once for TCP and once for UNIX domain sockets.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170829122745.14309-4-stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently 083 waits for the nbd-fault-injector.py server to start up by
looping until netstat shows the TCP listen socket.
The startup protocol can be simplified by passing a 0 port number to
nbd-fault-injector.py. The kernel will allocate a port in bind(2) and
the final port number can be printed by nbd-fault-injector.py.
This should make it slightly nicer and less TCP-specific to wait for
server startup. This patch changes nbd-fault-injector.py, the next one
will rewrite server startup in 083.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170829122745.14309-3-stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This is the follow-up patch that was discussed[*] as part of feedback to
qemu-iotest 194.
Changes in this patch:
- Supply 'job-id' parameter to `drive-mirror` invocation.
- Once migration completes, issue QMP `block-job-cancel` command on
the source QEMU to gracefully complete `drive-mirror` operation.
- Once the BLOCK_JOB_COMPLETED event is emitted, stop the NBD server
on the destination QEMU.
- Check for both the events: MIGRATION and BLOCK_JOB_COMPLETED.
With the above, the test will also be (almost) in sync with the
procedure outlined in the document 'live-block-operations.rst'[+]
(section: "QMP invocation for live storage migration with
``drive-mirror`` + NBD").
[*] https://lists.nongnu.org/archive/html/qemu-devel/2017-08/msg04820.html
-- qemu-iotests: add 194 non-shared storage migration test
[+] https://git.qemu.org/gitweb.cgi?p=qemu.git;a=blob;f=docs/interop/live-block-operations.rst
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20170829165058.8229-1-kchamart@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
With some small modifications, we can also use the the netfilter,
the filter-mirror and the filter-redirector tests on s390x.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502951113-4246-3-git-send-email-thuth@redhat.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This way we can get rid of the ugly #ifdefs in the code which makes
it easier to extend later.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502951113-4246-2-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that we've got a firmware that can do TFTP booting on s390x (i.e.
the pc-bios/s390-netboot.img), we can enable the PXE tester for this
architecture, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502431076-22849-3-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Re-using the boot_sector code buffer from x86 for other architectures
is not very nice, especially if we add more architectures later. It's
also ugly that the test uses a huge pre-initialized array at all - the
size of the executable is very huge due to this array. So let's use a
separate buffer for each architecture instead, allocated from the heap,
so that we really just use the memory that we need.
Suggested-by: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1502431076-22849-2-git-send-email-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Add the scripts/ directory to sys.path so Python 2.6 will be able to
import argparse.
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Message-id: 20170825155732.15665-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add the scripts/ directory to sys.path so Python 2.6 will be able to
import argparse.
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Message-id: 20170825155732.15665-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Both the throttling limits set with the throttling.iops-* and
throttling.bps-* options and their QMP equivalents defined in the
BlockIOThrottle struct are integer values.
Those limits are also reported in the BlockDeviceInfo struct and they
are integers there as well.
Therefore there's no reason to store them internally as double and do
the conversion everytime we're setting or querying them, so this patch
uses uint64_t for those types. Let's also use an unsigned type because
we don't allow negative values anyway.
LeakyBucket.level and LeakyBucket.burst_level do however remain double
because their value changes depending on the fraction of time elapsed
since the previous I/O operation.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: f29b840422767b5be2c41c2dfdbbbf6c5f8fedf8.1503580370.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Non-shared storage migration with NBD and drive-mirror is currently not
tested by qemu-iotests. This test case covers the basic migration
scenario.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Based-on: <20170823134242.12080-1-famz@redhat.com>
Message-Id: <20170823140506.28723-1-stefanha@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Prefer to use the tcg accelarator if it is available: This is our only
real smoke test for tcg, and fast enough to use it for that.
Fixes: 480bc11e6 ("boot-serial-test: fallback to kvm accelerator")
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 093 throttling test submits twice as many requests as the throttle
limit in order to ensure that we reach the limit. The remaining
requests are left in-flight at the end of each test iteration.
Commit 452589b6b4 ("vl.c/exit: pause cpus
before closing block devices") exposed a hang in 093. This happens
because requests are still in flight when QEMU terminates but
QEMU_CLOCK_VIRTUAL time is frozen. bdrv_drain_all() hangs forever since
throttled requests cannot complete.
Step the clock at the end of each test iteration so in-flight requests
actually finish. This solves the hang and is cleaner than leaving tests
in-flight.
Note that this could also be "fixed" by disabling throttling when drives
are closed in QEMU. That approach has two issues:
1. We must drain requests before disabling throttling, so the hang
cannot be easily avoided!
2. Any time QEMU disables throttling internally there is a chance that
malicious users can abuse the code path to bypass throttling limits.
Therefore it makes more sense to fix the test case than to modify QEMU.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170815130502.8736-1-stefanha@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This ease rebase/cherry-pick, also it is faster to visually find if a package
is here.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20170728233316.13352-2-f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Currently if you do "make check-help" in a fresh checkout, only an error
is printed which is not nice:
$ make check-help V=1
cc -nostdlib -o check-help.mo
cc: fatal error: no input files
compilation terminated.
rules.mak:115: recipe for target 'check-help.mo' failed
make: *** [check-help.mo] Error 1
Move the config-host.mak condition into the body of
tests/Makefile.include and always include the rule for check-help.
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170810085025.14076-1-famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
The check script contains a commented out root user requirement,
probably because of its xfstests heritage. This requirement doesn't
apply to qemu-iotests, so it better be gone.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The variables FULL_MKFS_OPTIONS and FULL_MOUNT_OPTIONS are commented
out, never used, and even refer to functions that do exist. The last
time these were touched was around 8 years ago, so I guess it's safe
to assume outputting such information on test execution is still on the
radar.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Although this function is used, its implementation does nothing
besides echoing a variable name. There's no need to wrap this
functionality in a function, and based on the one usage it has, it's
not even required to adhere to a convention or code style.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
s/continuosly/continuously/
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, at least x86_64 and s390x support building with --disable-tcg.
Instead of forcing tcg (which causes the test to fail on such builds),
allow to use kvm as well.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
185 can sometimes produce wrong output like this:
185 2s ... - output mismatch (see 185.out.bad)
--- /work/src/qemu/master/tests/qemu-iotests/185.out 2017-07-14 \
15:14:29.520343805 +0300
+++ 185.out.bad 2017-08-07 16:51:02.231922900 +0300
@@ -37,7 +37,7 @@
{"return": {}}
{"return": {}}
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, \
"event": "SHUTDOWN", "data": {"guest": false}}
-{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, \
"event": "BLOCK_JOB_CANCELLED", "data": {"device": "disk", \
"len": 4194304, "offset": 4194304, "speed": 65536, "type": \
"mirror"}}
+{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, \
"event": "BLOCK_JOB_CANCELLED", "data": {"device": "disk", \
"len": 0, "offset": 0, "speed": 65536, "type": "mirror"}}
=== Start backup job and exit qemu ===
Failures: 185
Failed 1 of 1 tests
This is because, under heavy load, the quit can happen before the first
iteration of the mirror request has occurred. To make sure we've had
time to iterate, let's just add a sleep for 0.5 seconds before quitting.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit b43671f8 accidentally broke run_test.sh within tests/multiboot;
due to a subtle change in whitespace.
These two commands produce theh same output (at least, for sane $IFS
of space-tab-newline):
echo -e "...$@..."
echo -e "...$*..."
But that's only because echo inserts spaces between multiple arguments
(the $@ case), while the $* form gives a single argument to echo with
the spaces already present.
But when converting to printf %b, there are no automatic spaces between
multiple arguments, so we HAVE to use $*.
It doesn't help that run_test.sh isn't part of 'make check'.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170809160212.29976-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently abort handlers only work for the first test function
in a testcase, because the list of abort handlers is not properly
cleared when qtest_quit() is called.
qtest_quit() only deletes the kill_qemu_hook but doesn't completely
clear the abrt_hooks list. The effect is that abrt_hooks.is_setup is
never set to false and in a following test the abrt_hooks list is not
initialized and setup_sigabrt_handler() is not called.
One way to solve this is to clear the list in qtest_quit(), but
that means only asserts between qtest_start and qtest_quit will
be catched by the abort handler.
We can make abort handlers work in all cases if we always setup the
signal handler for SIGABRT in qtest_init.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This serves as a regression test for the bugs that were just fixed for
bdrv_reopen() between read-only and read-write mode.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This option was only added to allow 'null-co://' and 'null-aio://' as
filenames, its value never served any actual purpose and was ignored.
Nevertheless it was accepted as '-drive driver=null,filename=foo'.
The correct way to enable the protocol prefixes (and that without adding
a useless -drive option) is implementing .bdrv_parse_filename. This is
what this patch does.
Technically, this is an incompatible change, but the null block driver
is only used for benchmarking, testing and debugging, and an option
without effect isn't likely to be used by anyone anyway, so no bad
effects are to be expected.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
A race condition is currently present between the clean up attempt of
the QEMU process and the execution of qemu-img. The actual (bad)
output is:
-Warning: Image size mismatch!
-Images are identical.
+qemu-img: Could not open '<build_dir>/tests/qemu-iotests/scratch/t.raw': Failed to get "consistent read" lock
+Is another process using the image?
A KILL signal is sent to the QEMU process, but qemu-img may begin to
run before the QEMU process is really gone. qemu-img will then
attempt to open the TEST_IMG file before it can secure a lock on it.
This attempts a more graceful shutdown, and waits for the QEMU process
to exit.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Learn to compile out vhost-user (net, scsi & upcoming users). Keep it
enabled by default on non-win32, that is assumed to be POSIX. Fail if
trying to enable it on win32.
When trying to make a vhost-user netdev, it gives the following error:
-netdev vhost-user,id=foo,chardev=chr-test: Parameter 'type' expects a netdev backend type
And similar error with the HMP/QMP monitors.
While at it, rename CONFIG_VHOST_NET_TEST CONFIG_VHOST_USER_NET_TEST
since it's a vhost-user specific variable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
testchardev2 is not a valid chardev id here. Use testchardev1
instead which has been created with chardev-add right before
the 'chardev-send-break' line.
And while we're at it, add the test-hmp.c file to the MAINTAINERS
file, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1501149097-19071-1-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some fixes all over the place. Notably vhost-user gained a new message
to set endian-ness. Borderline for 2.10 but seems to be the only way to
fix legacy guests. Also pc tests are run on kvm now. Not a fix at all
but doesn't touch qemu itself, so I merged it since I had to run these a
lot and I just got tired of waiting for these to finish.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZgPRvAAoJECgfDbjSjVRpUKAH/RE1PohaH/klzEVFLPZUdISN
/1zOdFN0BgVOUxS2udLVdZBUrWBiJWt11fbzASeGtOu3ruTpVfp69C7HUH8z4MOB
cyBWgtcf7qQc9cqE0VGO1kLU+ujSyPlkZonjWVfeCrf298SElIXUNVXcihqVsglA
VAL+tIUFT2Bbc3SH5xGsqHCMAy1hNRkEuF5t7enphOoxm7CdqghDLMfUEW65igYg
XNt3DELfFDQVnwGP8DWSWjgLVAvGAGWGNHQ9QD/FO5mdVrXh1lukV8ZtXf6K2VJc
svR670n3ZbMOkEIOGJYcYUFEKMgJXLNEpQX8WRM+vjnuEpDML6bBROtA8hckRv8=
=9TSs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, acpi, virtio: fixes, test speedup for rc1
Some fixes all over the place. Notably vhost-user gained a new message
to set endian-ness. Borderline for 2.10 but seems to be the only way to
fix legacy guests. Also pc tests are run on kvm now. Not a fix at all
but doesn't touch qemu itself, so I merged it since I had to run these a
lot and I just got tired of waiting for these to finish.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 01 Aug 2017 22:36:47 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
pc: acpi: force FADT rev1 for 440fx based machine types
pc: make 'pc.rom' readonly when machine has PCI enabled
vhost-user: fix watcher need be removed when vhost-user hotplug
tests/bios-tables-test: Compiler warning fix
accel: cleanup error output
intel_iommu: use access_flags for iotlb
intel_iommu: fix iova for pt
vhost-user: fix legacy cross-endian configurations
vhost: fix a memory leak
tests: switch pxe and vm gen id tests to use kvm
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gcc 7.1.1 in fedora 26 moans about the:
tables = g_new0(uint32_t, tables_nr)
because it can't convince itself that tables_nr is positive.
This is fallout from g_assert_cmpint no longer necessarily being
no-return; replace it with a plain g_assert.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Speed up tests on host systems with kvm support.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-iotests 059 left a whole lot of image files behind in the scratch
directory because VMDK creates additional files for extents and cleaning
them up requires the original image intact (it parses qemu-img info
output to find all extent files), but the image overwrote it many times
like it works for all other image formats.
In addition, _use_sample_img overwrites the TEST_IMG variable, causing
new images created afterwards to reuse the name of the sample file
rather than the usual t.IMGFMT.
This patch adds an intermediate _cleanup_test_img after each subtest
that created an image file with additional extent files, and also after
each use of a sample image. _cleanup_test_img is also changed so that it
resets TEST_IMG after a sample image is cleaned up.
Note that this test was failing before this commit and continues to do
so after it. This failure was introduced in commit 9877860 ('block/vmdk:
Report failures in vmdk_read_cid()') and needs to be dealt with
separately.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 063 left t.raw.raw1 behind in the scratch directory because
it used the wrong suffix. Make sure to clean it up after completing the
test.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 162 left qemu-nbd.pid behind in the scratch directory, and
potentially a file called '42' in the current directory. Make sure to
clean it up after completing the tests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests 153 left t.qcow2.c behind in the scratch directory. Make
sure to clean it up after completing the tests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
