There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122913.19561-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Checks for UNDEF cases should go before the "is VFP enabled?" access
check, except in special cases. Move a stray UNDEF check in the VTBL
trans function up above the access check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201109145324.2859-1-peter.maydell@linaro.org
The helper function did not get updated when we reorganized
the vector register file for SVE. Since then, the neon dregs
are non-sequential and cannot be simply indexed.
At the same time, make the helper function operate on 64-bit
quantities so that we do not have to call it twice.
Fixes: c39c2b9043
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: use aa32_vfp_dreg() rather than opencoding]
Message-id: 20201105171126.88014-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can use proper widening loads to extend 32-bit inputs,
and skip the "widenfn" step.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-12-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In both cases, we can sink the write-back and perform
the accumulate into the normal destination temps.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace all uses of neon_load/store_reg64 within translate-neon.c.inc.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Model these off the aa64 read/write_vec_element functions.
Use it within translate-neon.c.inc. The new functions do
not allocate or free temps, so this rearranges the calling
code a bit.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will shortly have users outside of translate-neon.c.inc.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function makes it clear that we're talking about the whole
register, and not the 32-bit piece at index 0. This fixes a bug
when running on a big-endian host.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030022618.785675-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VCMLA and VCADD insns have a size field which is 0 for fp16
and 1 for fp32 (note that this is the reverse of the Neon 3-same
encoding!). Convert it to MO_* values in decode for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200903133209.5141-4-peter.maydell@linaro.org
Convert the insns using the 2reg_vcvt and 2reg_vcvt_f16 formats
to pass the size through to the trans function as a MO_* value
rather than the '0==f32, 1==f16' used in the fp 3-same encodings.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200903133209.5141-3-peter.maydell@linaro.org
In the Neon instructions, some instruction formats have a 2-bit size
field which corresponds exactly to QEMU's MO_8/16/32/64. However the
floating-point insns in the 3-same group have a 1-bit size field
which is "0 for 32-bit float and 1 for 16-bit float". Currently we
pass these values directly through to trans_ functions, which means
that when reading a particular trans_ function you need to know if
that insn uses a 2-bit size or a 1-bit size.
Move the handling of the 1-bit size to the decodetree file, so that
all these insns consistently pass a size to the trans_ function which
is an MO_8/16/32/64 value.
In this commit we switch over the insns using the 3same_fp and
3same_fp_q0 formats.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200903133209.5141-2-peter.maydell@linaro.org
Convert the Neon floating-point VMUL, VMLA and VMLS to use gvec,
and use this to implement fp16 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-45-peter.maydell@linaro.org
Convert the Neon VRINTX insn to use gvec, and use this to implement
fp16 support for it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-42-peter.maydell@linaro.org
Convert the Neon VRINT-with-specified-rounding-mode insns to gvec,
and use this to implement the fp16 versions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-41-peter.maydell@linaro.org
Convert the Neon VCVT with-specified-rounding-mode instructions
to gvec, and use this to implement fp16 support for them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-40-peter.maydell@linaro.org
Implement fp16 for the Neon VCVT insns which convert between
float and fixed-point.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-39-peter.maydell@linaro.org
Convert the Neon VCVT float<->fixed-point insns to a
gvec style, in preparation for adding fp16 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-38-peter.maydell@linaro.org
Convert the Neon float-integer VCVT insns to gvec, and use this
to implement fp16 support for them.
Note that unlike the VFP int<->fp16 VCVT insns we converted
earlier and which convert to/from a 32-bit integer, these
Neon insns convert to/from 16-bit integers. So we can use
the existing vfp conversion helpers for the f32<->u32/i32
case but need to provide our own for f16<->u16/i16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-37-peter.maydell@linaro.org
Convert the Neon pairwise fp ops to use a single gvic-style
helper to do the full operation instead of one helper call
for each 32-bit part. This allows us to use the same
framework to implement the fp16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-36-peter.maydell@linaro.org
Convert the Neon VRSQRTS insn to using a gvec helper,
and use this to implement the fp16 case.
As with VRECPS, we adjust the phrasing of the new implementation
slightly so that the fp32 version parallels the fp16 one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-35-peter.maydell@linaro.org
Convert the Neon VRECPS insn to using a gvec helper, and
use this to implement the fp16 case.
The phrasing of the new float32_recps_nf() is slightly different from
the old recps_f32() so that it parallels the f16 version; for f16 we
can't assume that flush-to-zero is always enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-34-peter.maydell@linaro.org
Convert the neon floating-point vector compare-vs-0 insns VCEQ0,
VCGT0, VCLE0, VCGE0 and VCLT0 to use a gvec helper, and use this to
implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-33-peter.maydell@linaro.org
Convert the neon floating-point vector operations VFMA and VFMS
to use a gvec helper, and use this to implement the fp16 case.
This is the last use of do_3same_fp() so we can now delete
that function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-32-peter.maydell@linaro.org
Convert the Neon floating-point VMLA and VMLS insns over to using a
gvec helper, and use this to implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-31-peter.maydell@linaro.org
Convert the Neon floating point VMAXNM and VMINNM insns to
using a gvec helper and use this to implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-30-peter.maydell@linaro.org
Convert the Neon float-point VMAX and VMIN insns over to using
a gvec helper, and use this to implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-29-peter.maydell@linaro.org
Convert the neon floating-point vector absolute comparison ops
VACGE and VACGT over to using a gvec hepler and use this to
implement the fp16 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-28-peter.maydell@linaro.org
Convert the Neon floating-point vector comparison ops VCEQ,
VCGE and VCGT over to using a gvec helper and use this to
implement the fp16 case.
(We put the float16_ceq() etc functions above the DO_2OP()
macro definition because later when we convert the
compare-against-zero instructions we'll want their
definitions to be visible at that point in the source file.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-27-peter.maydell@linaro.org
Rewrite Neon VABS/VNEG of floats to use gvec logical AND and XOR, so
that we can implement the fp16 version of the insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-26-peter.maydell@linaro.org
We already have gvec helpers for floating point VRECPE and
VRQSRTE, so convert the Neon decoder to use them and
add the fp16 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-25-peter.maydell@linaro.org
Implement FP16 support for the Neon insns which use the DO_3S_FP_GVEC
macro: VADD, VSUB, VABD, VMUL.
For VABD this requires us to implement a new gvec_fabd_h helper
using the machinery we have already for the other helpers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-24-peter.maydell@linaro.org
When we implemented the VCMLA and VCADD insns we put in the
code to handle fp16, but left it using the standard fp status
flags. Correct them to use FPST_STD_F16 for fp16 operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200806104453.30393-5-peter.maydell@linaro.org
Make A32/T32 code use the new fpstatus_ptr() API:
get_fpstatus_ptr(0) -> fpstatus_ptr(FPST_FPCR)
get_fpstatus_ptr(1) -> fpstatus_ptr(FPST_STD)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200806104453.30393-3-peter.maydell@linaro.org
With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.
Alternatively you can use a fine-grained dependency, e.g.
target/arm/translate.o: target/arm/decode-neon-shared.inc.c
With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.
The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.
Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files. The editorconfig
file is adjusted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
