$ ~/usr/bin/qemu-system-x86_64 -enable-kvm -m 1024 -drive if=none,id=drive0,cache=none,aio=native,format=raw,file=/root/Image/centos-6.4.raw -device virtio-blk-pci,drive=drive0,scsi=off,x-data-plane=on,config-wce=on # make dataplane fail to initialize
qemu-system-x86_64: -device virtio-blk-pci,drive=drive0,scsi=off,x-data-plane=on,config-wce=on: device is incompatible with x-data-plane, use config-wce=off
*** glibc detected *** /root/usr/bin/qemu-system-x86_64: free(): invalid pointer: 0x00007f001fef12f8 ***
======= Backtrace: =========
/lib64/libc.so.6(+0x7d776)[0x7f00153a5776]
/root/usr/bin/qemu-system-x86_64(+0x2c34ec)[0x7f001cf5b4ec]
/root/usr/bin/qemu-system-x86_64(+0x342f9a)[0x7f001cfdaf9a]
/root/usr/bin/qemu-system-x86_64(+0x33694e)[0x7f001cfce94e]
....................
(gdb) bt
#0 0x00007f3bf3a12015 in raise () from /lib64/libc.so.6
#1 0x00007f3bf3a1348b in abort () from /lib64/libc.so.6
#2 0x00007f3bf3a51a4e in __libc_message () from /lib64/libc.so.6
#3 0x00007f3bf3a57776 in malloc_printerr () from /lib64/libc.so.6
#4 0x00007f3bfb60d4ec in free_and_trace (mem=0x7f3bfe0129f8) at vl.c:2786
#5 0x00007f3bfb68cf9a in virtio_cleanup (vdev=0x7f3bfe0129f8) at /root/Develop/QEMU/qemu/hw/virtio.c:900
#6 0x00007f3bfb68094e in virtio_blk_device_init (vdev=0x7f3bfe0129f8) at /root/Develop/QEMU/qemu/hw/virtio-blk.c:666
#7 0x00007f3bfb68dadf in virtio_device_init (qdev=0x7f3bfe0129f8) at /root/Develop/QEMU/qemu/hw/virtio.c:1092
#8 0x00007f3bfb50da46 in device_realize (dev=0x7f3bfe0129f8, err=0x7fff479c9258) at hw/qdev.c:176
.............................
In virtio_blk_device_init(), the memory which vdev point to is a static
member of "struct VirtIOBlkPCI", not heap memory, and it does not
get freed. So we shoule use virtio_common_cleanup() to clean this VirtIODevice
rather than virtio_cleanup(), which attempts to free the vdev.
This error was introduced by commit 05ff686536
recently.
Signed-off-by: Dunrong Huang <huangdr@cloud-times.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qdev field is no longer needed, just drop it.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1363624648-16906-12-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use QOM casts inside virtio-blk.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1363624648-16906-11-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As all virtio-blk-* are switched to the new API, we can remove the separate
init/exit for the old API.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1363624648-16906-10-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-blk which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1363624648-16906-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The configuration field must not be a pointer as it will be used for virtio-blk
properties. So *blk is replaced by blk in VirtIOBlock structure.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1363624648-16906-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These structures must be made public to avoid two memory allocations for
refactored virtio devices.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1363624648-16906-2-git-send-email-fred.konrad@greensocs.com
Changes V4 <- V3:
* Rebased on current git.
Changes V3 <- V2:
* Style correction spotted by Andreas (virtio-scsi.h).
* Style correction for virtio-net.h.
Changes V2 <- V1:
* Move the dataplane include into the header (virtio-blk).
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/hw-dirs:
sh: move files referencing CPU to hw/sh4/
ppc: move more files to hw/ppc
ppc: move files referencing CPU to hw/ppc/
m68k: move files referencing CPU to hw/m68k/
i386: move files referencing CPU to hw/i386/
arm: move files referencing CPU to hw/arm/
hw: move boards and other isolated files to hw/ARCH
ppc: express FDT dependency of pSeries and e500 boards via default-configs/
build: always link device_tree.o into emulators if libfdt available
hw: include hw header files with full paths
ppc: do not use ../ in include files
vt82c686: vt82c686 is not a PCI host bridge
virtio-9p: remove PCI dependencies from hw/9pfs/
virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX
hw: move device-hotplug.o to toplevel, compile it once
hw: move qdev-monitor.o to toplevel directory
hw: move fifo.[ch] to libqemuutil
hw: move char backends to backends/
Conflicts:
backends/baum.c
backends/msmouse.c
hw/a15mpcore.c
hw/arm/Makefile.objs
hw/arm/pic_cpu.c
hw/dataplane/event-poll.c
hw/dataplane/virtio-blk.c
include/char/baum.h
include/char/msmouse.h
qemu-char.c
vl.c
Resolve conflicts caused by header movements.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
virtio-blk registers a vmstate change handler. Unfortunately this
handler is not unregistered on unplug, leading to some random
crashes if the system is restarted, e.g. via virsh reboot.
Lets unregister the vmstate change handler if the device is removed.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Done with this script:
cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `find . -type f`
This is so that paths remain valid as files are moved.
Instead, files in hw/dataplane are referenced with the relative path.
We know they are not going to move to include/, and they are the only
include files that are in subdirectories _and_ move.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The viostor virtio-blk driver for Windows does not use the
VIRTIO_CONFIG_S_DRIVER bit. It only sets the VIRTIO_CONFIG_S_DRIVER_OK
bit.
The viostor driver refreshes the virtio-pci status byte sometimes while
the guest is running. We misinterpret 0x4 (VIRTIO_CONFIG_S_DRIVER_OK)
as an indication that virtio-blk-data-plane should be stopped since 0x2
(VIRTIO_CONFIG_S_DRIVER) is missing. The result is that the device
becomes unresponsive.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, all unknown requests are treated as VIRTIO_BLK_T_IN
Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-blk-data-plane feature is easy to integrate into
hw/virtio-blk.c. The data plane can be started and stopped similar to
vhost-net.
Users can take advantage of the virtio-blk-data-plane feature using the
new -device virtio-blk-pci,x-data-plane=on property.
The x-data-plane name was chosen because at this stage the feature is
experimental and likely to see changes in the future.
If the VM configuration does not support virtio-blk-data-plane an error
message is printed. Although we could fall back to regular virtio-blk,
I prefer the explicit approach since it prompts the user to fix their
configuration if they want the performance benefit of
virtio-blk-data-plane.
Limitations:
* Only format=raw is supported
* Live migration is not supported
* Block jobs, hot unplug, and other operations fail with -EBUSY
* I/O throttling limits are ignored
* Only Linux hosts are supported due to Linux AIO usage
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Two slightly different versions of a patch to conditionally set
VIRTIO_BLK_F_CONFIG_WCE through the "config-wce" qdev property have been
applied (ea776abca and eec7f96c2). David Gibson
<david@gibson.dropbear.id.au> noticed that the "config-wce"
property is broken as a result and fixed it recently.
The fix sets the host_features VIRTIO_BLK_F_CONFIG_WCE bit from a qdev
property. Unfortunately, the virtio device then has no chance to test
for the presence of the feature bit during virtio_blk_init().
Therefore, reinstate the VirtIOBlkConf->config_wce flag. Drop the
duplicate qdev property to set the host_features bit. The
VirtIOBlkConf->config_wce flag will be used by virtio-blk-data-plane in
a later patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move the common part of IDE/SCSI/virtio error handling to the block
layer. The new function bdrv_error_action subsumes all three of
bdrv_emit_qmp_error_event, vm_stop, bdrv_iostatus_set_err.
The same scheme will be used for errors in block jobs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Do this while we are touching this part of the code, before introducing
more uses of "int is_read".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will let block-stream reuse the enum. Places that used the enums
are renamed accordingly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to remove knowledge of BLOCK_ERR_STOP_ENOSPC from drivers;
drivers should only be told whether to stop/report/ignore the error.
On the other hand, we want to keep using the nicer BlockErrorAction
name in the drivers. So rename the enums, while leaving aside the
names of the enum values for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU has a policy of keeping a stable guest device ABI. When new guest device
features are introduced they must not change hardware info seen by existing
guests. This is important because operating systems or applications may
"fingerprint" the hardware and refuse to run when the hardware changes. To
always get the latest guest device ABI, run with x86 machine type "pc".
This patch hides the new VIRTIO_BLK_F_CONFIG_WCE virtio feature bit from
existing machine types. Only pc-1.2 and later will expose this feature
by default.
For more info on the VIRTIO_BLK_F_CONFIG_WCE feature bit, see:
commit 13e3dce068
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Thu Aug 9 16:07:19 2012 +0200
virtio-blk: support VIRTIO_BLK_F_CONFIG_WCE
Also rename VIRTIO_BLK_F_WCACHE to VIRTIO_BLK_F_WCE for consistency with
the spec.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Anthony Liguori <aliguori@us.ibm.com> reported:
This broke qemu-test because it changed the pc-1.0 machine type:
Setting guest RANDOM seed to 47167
*** Running tests ***
Running test /tests/finger-print.sh... OK
--- fingerprints/pc-1.0.x86_64 2011-12-18 13:08:40.000000000 -0600
+++ fingerprint.txt 2012-08-12 13:30:48.000000000 -0500
@@ -55,7 +55,7 @@
/sys/bus/pci/devices/0000:00:06.0/subsystem_device=0x0002
/sys/bus/pci/devices/0000:00:06.0/class=0x010000
/sys/bus/pci/devices/0000:00:06.0/revision=0x00
-/sys/bus/pci/devices/0000:00:06.0/virtio/host-features=0x710006d4
+/sys/bus/pci/devices/0000:00:06.0/virtio/host-features=0x71000ed4
/sys/class/dmi/id/bios_vendor=Bochs
/sys/class/dmi/id/bios_date=01/01/2007
/sys/class/dmi/id/bios_version=Bochs
Guest fingerprint changed for pc-1.0!
Reported-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If the guest does not support flushes, we should run in writethrough mode.
The setting is temporary until the next reset, so that for example the
BIOS will run in writethrough mode while Linux will run with a writeback
cache.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Also rename VIRTIO_BLK_F_WCACHE to VIRTIO_BLK_F_WCE for consistency with
the spec.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The scsi passthrough handler falls through after completing a
request into the failure path, resulting in a use after free.
Reproducible by running a guest with aio=native on a block device.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Geometry needs to be qdev properties, because it belongs to the
disk's guest part.
Maintain backward compatibility exactly like for serial: fall back to
DriveInfo's geometry, set with -drive cyls=...
Bonus: info qtree now shows the geometry.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Best to use the same type, to avoid unwanted truncation or sign
extension.
BlockConf can't use plain int for cyls, heads and secs, because
integer properties require an exact width.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
hd_geometry_guess() picks geometry and translation. Callers can get
the geometry directly, via parameters, but for translation they need
to go through the block layer.
Add a parameter for translation, so it can optionally be gotten just
like geometry. In preparation of purging translation from the block
layer, which will happen later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit f3d54fc4 factored it out of hw/ide.c for reuse. Sensible,
except it was put into block.c. Device-specific functionality should
be kept in device code, not the block layer. Move it to
hw/hd-geometry.c, and make stylistic changes required to keep
checkpatch.pl happy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently the sector value for the geometry is masked, even if the
user usesa command line parameter that explicitely gives a number.
This breaks dasd devices on s390. A dasd device can have
a physical block size of 4096 (== same for logical block size)
and a typcial geometry of 15 heads and 12 sectors per cyl.
The ibm partition detection relies on a correct geometry
reported by the device. Unfortunately the current code changes
12 to 8. This would be necessary if the total size is
not a multiple of logical sector size, but for dasd this
is not the case.
This patch checks the device size and only applies sector
mask if necessary.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Christoph Hellwig <hch@lst.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The local variables ret, i are only used if __linux__ is defined.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VIRTIO_BLK_F_SCSI is supposed to mean whether the host can *parse*
SCSI requests, not *execute* them. You could run QEMU with scsi=on
and a file-backed disk, and QEMU would fail all SCSI requests even
though it advertises VIRTIO_BLK_F_SCSI.
Because we need to do this to fix a migration compatibility problem
related to how QEMU is invoked by management, we must do this
unconditionally even on older machine types. This more or less assumes
that no one ever invoked QEMU with scsi=off.
Here is how testing goes:
- old QEMU, scsi=on -> new QEMU, scsi=on
- new QEMU, scsi=on -> old QEMU, scsi=on
- old QEMU, scsi=off -> new QEMU, scsi=on
- new QEMU, scsi=off -> old QEMU, scsi=on
ok (new QEMU has VIRTIO_BLK_F_SCSI, adding host features is fine)
- old QEMU, scsi=off -> new QEMU, scsi=off
ok (new QEMU has VIRTIO_BLK_F_SCSI, adding host features is fine)
- old QEMU, scsi=on -> new QEMU, scsi=off
ok, bug fixed
- new QEMU, scsi=on -> old QEMU, scsi=off
doesn't work (same as: old QEMU, scsi=on -> old QEMU, scsi=off)
- new QEMU, scsi=off -> old QEMU, scsi=off
broken by the patch
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We will have to add another field to the virtio-blk configuration in
the next patch. Avoid a proliferation of arguments to virtio_blk_init.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move it from virtio_blk_exit_pci to virtio_blk_exit.
This is included here because the next patch removes proxy->block.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Linux really looks only at scsi->errors for SG_IO requests; it does
not look at the virtio request status at all. Because of this, when
a SG_IO request is failed early with virtio_blk_req_complete(req,
VIRTIO_BLK_S_UNSUPP), without writing hdr.status, it will look like
a success to the guest.
This is their bug, but we can make it safe for older guests now by
forcing scsi->errors to have a non-zero value whenever a request
has to be failed.
But if we fix the bug in the guest driver, we will have another problem
because QEMU returns VIRTIO_BLK_S_IOERR if the status is non-zero, and
Linux translates that to -EIO. Rather, the guest should succeed the
request and pass the non-zero status via the userspace-provided SG_IO
structure. So, remove the case where virtio_blk_handle_scsi can
return VIRTIO_BLK_S_IOERR.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
They are QMP events, not monitor events. Rename them accordingly.
Also, move bdrv_emit_qmp_error_event() up in the file. A new event will
be added soon and it's good to have them next each other.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
There already exists a virtio_blk_handle_write trace event as well as
completion events. Add the virtio_blk_handle_read event so it's easy to
trace virtio-blk requests for both read and write operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU does have a "scsi" option (to be used like -device
virtio-blk-pci,drive=foo,scsi=off). However, it only
masks the feature bit, and does not reject the command
if a malicious guest disregards the feature bits and
issues a request.
Without this patch, using scsi=off does not protect you
from CVE-2011-4127.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace
error_report("DEVICE-NAME: MESSAGE");
by just
error_report("MESSAGE");
in block device init functions.
DEVICE-NAME is bogus in some cases: it's "scsi-disk" for device
scsi-hd and scsi-cd, "virtio-blk-pci" for virtio-blk-s390, and
"usb-msd" for usb-storage.
There is no real need to put a device name in the message, because
error_report() points to the offending command line option already:
$ qemu-system-x86_64 --nodefaults --enable-kvm -vnc :0 -S -monitor stdio -usb -device virtio-blk-pci
upstream-qemu: -device virtio-blk-pci: virtio-blk-pci: drive property not set
upstream-qemu: -device virtio-blk-pci: Device 'virtio-blk-pci' could not be initialized
And for a monitor command, it's obvious anyway:
$ qemu-system-x86_64 --nodefaults --enable-kvm -vnc :0 -S -monitor stdio -usb
(qemu) device_add virtio-blk-pci
virtio-blk-pci: drive property not set
Device 'virtio-blk-pci' could not be initialized
Reported-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Initially done with the following semantic patch:
@ rule1 @
expression E;
statement S;
@@
E =
(
bdrv_aio_readv
| bdrv_aio_writev
| bdrv_aio_flush
| bdrv_aio_discard
| bdrv_aio_ioctl
)
(...);
(
- if (E == NULL) { ... }
|
- if (E)
{ <... S ...> }
)
which however missed the occurrence in block/blkverify.c
(as it should have done), and left behind some unused
variables.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Many places in QEMU call qemu_aio_flush() to complete all pending
asynchronous I/O. Most of these places actually want to drain all block
requests but there is no block layer API to do so.
This patch introduces the bdrv_drain_all() API to wait for requests
across all BlockDriverStates to complete. As a bonus we perform checks
after qemu_aio_wait() to ensure that requests really have finished.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When SCSI passthrough is being used by the guest with virtio-blk, the
guest is not able to detect disk failures. This is because the status
field is expected by the guest driver to include also the msg_status,
host_status and driver_status fields, but the device is only passing
down the SCSI status.
The patch fixes this, and also makes sure that the guest always sees a
CHECK_CONDITION status when there is valid sense data.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Next commit will convert the query-status command to use the
RunState type as generated by the QAPI.
In order to "transparently" replace the current enum by the QAPI
one, we have to make some changes to some enum values.
As the changes are simple renames, I'll do them in one shot. The
changes are:
- Rename the prefix from RSTATE_ to RUN_STATE_
- RUN_STATE_SAVEVM to RUN_STATE_SAVE_VM
- RUN_STATE_IN_MIGRATE to RUN_STATE_INMIGRATE
- RUN_STATE_PANICKED to RUN_STATE_INTERNAL_ERROR
- RUN_STATE_POST_MIGRATE to RUN_STATE_POSTMIGRATE
- RUN_STATE_PRE_LAUNCH to RUN_STATE_PRELAUNCH
- RUN_STATE_PRE_MIGRATE to RUN_STATE_PREMIGRATE
- RUN_STATE_RESTORE to RUN_STATE_RESTORE_VM
- RUN_STATE_PRE_MIGRATE to RUN_STATE_FINISH_MIGRATE
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Today, when notifying a VM state change with vm_state_notify(),
we pass a VMSTOP macro as the 'reason' argument. This is not ideal
because the VMSTOP macros tell why qemu stopped and not exactly
what the current VM state is.
One example to demonstrate this problem is that vm_start() calls
vm_state_notify() with reason=0, which turns out to be VMSTOP_USER.
This commit fixes that by replacing the VMSTOP macros with a proper
state type called RunState.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Device models should be able to set it without an unclean include of
block_int.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's convenience stuff for block device models, so block.h isn't the
ideal home either, but better than block_int.h.
Permits moving some #include "block_int.h" from device model .h into
.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
