* ITS: error reporting cleanup
* aspeed: improve documentation
* Fix STM32F2XX USART data register readout
* allow emulated GICv3 to be disabled in non-TCG builds
* fix exception priority for singlestep, misaligned PC, bp, etc
* Correct calculation of tlb range invalidate length
* npcm7xx_emc: fix missing queue_flush
* virt: Add VIOT ACPI table for virtio-iommu
* target/i386: Use assert() to sanity-check b1 in SSE decode
* Don't include qemu-common unnecessarily
-----BEGIN PGP SIGNATURE-----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=KuTi
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20211215' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* ITS: error reporting cleanup
* aspeed: improve documentation
* Fix STM32F2XX USART data register readout
* allow emulated GICv3 to be disabled in non-TCG builds
* fix exception priority for singlestep, misaligned PC, bp, etc
* Correct calculation of tlb range invalidate length
* npcm7xx_emc: fix missing queue_flush
* virt: Add VIOT ACPI table for virtio-iommu
* target/i386: Use assert() to sanity-check b1 in SSE decode
* Don't include qemu-common unnecessarily
# gpg: Signature made Wed 15 Dec 2021 02:39:37 AM PST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20211215' of https://git.linaro.org/people/pmaydell/qemu-arm: (33 commits)
tests/acpi: add expected blob for VIOT test on virt machine
tests/acpi: add expected blobs for VIOT test on q35 machine
tests/acpi: add test case for VIOT
tests/acpi: allow updates of VIOT expected data files
hw/arm/virt: Use object_property_set instead of qdev_prop_set
hw/arm/virt: Reject instantiation of multiple IOMMUs
hw/arm/virt: Remove device tree restriction for virtio-iommu
hw/arm/virt-acpi-build: Add VIOT table for virtio-iommu
hw/net: npcm7xx_emc fix missing queue_flush
target/arm: Correct calculation of tlb range invalidate length
hw/arm: Don't include qemu-common.h unnecessarily
target/rx/cpu.h: Don't include qemu-common.h
target/hexagon/cpu.h: don't include qemu-common.h
include/hw/i386: Don't include qemu-common.h in .h files
target/i386: Use assert() to sanity-check b1 in SSE decode
tests/tcg: Add arm and aarch64 pc alignment tests
target/arm: Suppress bp for exceptions with more priority
target/arm: Assert thumb pc is aligned
target/arm: Take an exception if PC is misaligned
target/arm: Split compute_fsr_fsc out of arm_deliver_fault
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
The aspeed machines connects backends with drive_get_next() in several
counting loops, one of them in a helper function, and a conditional.
Change it to use drive_get() directly. This makes the unit numbers
explicit in the code.
Cc: "Cédric Le Goater" <clg@kaod.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-13-armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "xlnx-zcu102" connects backends with drive_get_next() in two
counting loops, one of them in a helper function. Change it to use
drive_get() directly. This makes the unit numbers explicit in the
code.
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alistair Francis <alistair@alistair23.me>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-12-armbru@redhat.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "xlnx-zcu102" connects backends with drive_get_next() in
several counting loops. Change it to use drive_get() directly. This
makes the unit numbers explicit in the code.
Cc: Alistair Francis <alistair@alistair23.me>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-11-armbru@redhat.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
To propagate errors to the caller of the pre_plug callback, use the
object_poperty_set*() functions directly instead of the qdev_prop_set*()
helpers.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20211210170415.583179-5-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We do not support instantiating multiple IOMMUs. Before adding a
virtio-iommu, check that no other IOMMU is present. This will detect
both "iommu=smmuv3" machine parameter and another virtio-iommu instance.
Fixes: 70e89132c9 ("hw/arm/virt: Add the virtio-iommu device tree mappings")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20211210170415.583179-4-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtio-iommu is now supported with ACPI VIOT as well as device tree.
Remove the restriction that prevents from instantiating a virtio-iommu
device under ACPI.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20211210170415.583179-3-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a virtio-iommu is instantiated, describe it using the ACPI VIOT
table.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20211210170415.583179-2-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The rx_active boolean change to true should always trigger a try_read
call that flushes the queue.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20211203221002.1719306-1-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A lot of C files in hw/arm include qemu-common.h when they don't
need anything from it. Drop the include lines.
omap1.c, pxa2xx.c and strongarm.c retain the include because they
use it for the prototype of qemu_get_timedate().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-id: 20211129200510.1233037-5-peter.maydell@linaro.org
The TYPE_ARM_GICV3 device is an emulated one. When using
KVM, it is recommended to use the TYPE_KVM_ARM_GICV3 device
(which uses in-kernel support).
When using --with-devices-FOO, it is possible to build a
binary with a specific set of devices. When this binary is
restricted to KVM accelerator, the TYPE_ARM_GICV3 device is
irrelevant, and it is desirable to remove it from the binary.
Therefore introduce the CONFIG_ARM_GIC_TCG Kconfig selector
which select the files required to have the TYPE_ARM_GICV3
device, but also allowing to de-select this device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20211115223619.2599282-3-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gicv3_set_gicv3state() is used by arm_gicv3_common.c in
arm_gicv3_common_realize(). Since we want to restrict
arm_gicv3_cpuif.c to TCG, extract gicv3_set_gicv3state()
to a new file. Add this file to the meson 'specific'
source set, since it needs access to "cpu.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20211115223619.2599282-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix issue where the data register may be overwritten by next character
reception before being read and returned.
Signed-off-by: Olivier Hériveaux <olivier.heriveaux@ledger.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211128120723.4053-1-olivier.heriveaux@ledger.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While trying to debug a GIC ITS failure I saw some guest errors that
had poor formatting as well as leaving me confused as to what failed.
As most of the checks aren't possible without a valid dte split that
check apart and then check the other conditions in steps. This avoids
us relying on undefined data.
I still get a failure with the current kvm-unit-tests but at least I
know (partially) why now:
Exception return from AArch64 EL1 to AArch64 EL1 PC 0x40080588
PASS: gicv3: its-trigger: inv/invall: dev2/eventid=20 now triggers an LPI
ITS: MAPD devid=2 size = 0x8 itt=0x40430000 valid=0
INT dev_id=2 event_id=20
process_its_cmd: invalid command attributes: invalid dte: 0 for 2 (MEM_TX: 0)
PASS: gicv3: its-trigger: mapd valid=false: no LPI after device unmap
SUMMARY: 6 tests, 1 unexpected failures
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20211112170454.3158925-1-alex.bennee@linaro.org
Cc: Shashi Mallela <shashi.mallela@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "petalogix-ml605" connects backends with drive_get_next() in a
counting loop. Change it to use drive_get() directly. This makes the
unit numbers explicit in the code.
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-10-armbru@redhat.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "xlnx-versal-virt" connects backends with drive_get_next() in
a counting loop. Change it to use drive_get() directly. This makes
the unit numbers explicit in the code.
Cc: Alistair Francis <alistair@alistair23.me>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-9-armbru@redhat.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "mcimx7d-sabre" connects backends with drive_get_next() in a
counting loop. Change it to use drive_get() directly. This makes the
unit numbers explicit in the code.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-8-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "mcimx6ul-evk" connects backends with drive_get_next() in a
counting loop. Change it to use drive_get() directly. This makes the
unit numbers explicit in the code.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-7-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "imx25-pdk" connects backends with drive_get_next() in a
counting loop. Change it to use drive_get() directly. This makes the
unit numbers explicit in the code.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-6-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
The versatile and vexpress machines ("versatileab", "versatilepb",
"vexpress-a9", "vexpress-a15") connect just one or two backends of a
type with drive_get_next(). Change them to use drive_get() directly.
This makes the unit numbers explicit in the code.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-5-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "quanta-gbs-bmc" connects just one backend with
drive_get_next(), but with a helper function. Change it to use
drive_get() directly. This makes the unit numbers explicit in the
code.
Cc: Havard Skinnemoen <hskinnemoen@google.com>
Cc: Tyrone Ting <kfting@nuvoton.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-4-armbru@redhat.com>
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
A number of machines connect just one backend with drive_get_next().
Change them to use drive_get() directly. This makes the (zero) unit
number explicit in the code.
Cc: Beniamino Galvani <b.galvani@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Cc: Niek Linnenbank <nieklinnenbank@gmail.com>
Cc: Andrew Baumann <Andrew.Baumann@microsoft.com>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Artyom Tarasenko <atar4qemu@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: qemu-arm@nongnu.org
Cc: qemu-riscv@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-3-armbru@redhat.com>
ssi_sd_realize() creates an "sd-card" device. This is inappropriate,
and marked FIXME.
Move it to the boards that create these devices. Prior art: commit
eb4f566bbb for device "generic-sdhci", and commit 26c607b86b for
device "pl181".
The device remains not user-creatable, because its users should (and
do) wire up its GPIO chip-select line.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Cc: qemu-arm@nongnu.org
Cc: qemu-riscv@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
in old times the domain range was defined by a domain_bits le32.
This was then converted into a domain_range struct. During the
upgrade the original value of '32' (bits) has been kept while
the end field now is the max value of the domain id (UINT32_MAX).
Fix that and also use UINT64_MAX for the input_range.end.
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211127072910.1261824-4-eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Endianess is not properly handled when populating
the returned config. Use the cpu_to_le* primitives
for each separate field. Also, while at it, trace
the domain range start.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211127072910.1261824-3-eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The spec says "the driver must not write to device configuration
fields". So remove the set_config() callback which anyway did
not do anything.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211127072910.1261824-2-eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add the SGXEPCSection list into SGXInfo to show the multiple
SGX EPC sections detailed info, not the total size like before.
This patch can enable numa support for 'info sgx' command and
QMP interfaces. The new interfaces show each EPC section info
in one numa node. Libvirt can use QMP interface to get the
detailed host SGX EPC capabilities to decide how to allocate
host EPC sections to guest.
(qemu) info sgx
SGX support: enabled
SGX1 support: enabled
SGX2 support: enabled
FLC support: enabled
NUMA node #0: size=67108864
NUMA node #1: size=29360128
The QMP interface show:
(QEMU) query-sgx
{"return": {"sgx": true, "sgx2": true, "sgx1": true, "sections": \
[{"node": 0, "size": 67108864}, {"node": 1, "size": 29360128}], "flc": true}}
(QEMU) query-sgx-capabilities
{"return": {"sgx": true, "sgx2": true, "sgx1": true, "sections": \
[{"node": 0, "size": 17070817280}, {"node": 1, "size": 17079205888}], "flc": true}}
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211101162009.62161-4-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The basic SGX did not enable numa for SGX EPC sections, which
result in all EPC sections located in numa node 0. This patch
enable SGX numa function in the guest and the EPC section can
work with RAM as one numa node.
The Guest kernel related log:
[ 0.009981] ACPI: SRAT: Node 0 PXM 0 [mem 0x180000000-0x183ffffff]
[ 0.009982] ACPI: SRAT: Node 1 PXM 1 [mem 0x184000000-0x185bfffff]
The SRAT table can normally show SGX EPC sections menory info in different
numa nodes.
The SGX EPC numa related command:
......
-m 4G,maxmem=20G \
-smp sockets=2,cores=2 \
-cpu host,+sgx-provisionkey \
-object memory-backend-ram,size=2G,host-nodes=0,policy=bind,id=node0 \
-object memory-backend-epc,id=mem0,size=64M,prealloc=on,host-nodes=0,policy=bind \
-numa node,nodeid=0,cpus=0-1,memdev=node0 \
-object memory-backend-ram,size=2G,host-nodes=1,policy=bind,id=node1 \
-object memory-backend-epc,id=mem1,size=28M,prealloc=on,host-nodes=1,policy=bind \
-numa node,nodeid=1,cpus=2-3,memdev=node1 \
-M sgx-epc.0.memdev=mem0,sgx-epc.0.node=0,sgx-epc.1.memdev=mem1,sgx-epc.1.node=1 \
......
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211101162009.62161-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the "Arm Generic Interrupt Controller Architecture
Specification GIC architecture version 3 and 4" (version G: page 345
for aarch64 or 509 for aarch32):
LRENP bit of ICH_MISR is set when ICH_HCR.LRENPIE==1 and
ICH_HCR.EOIcount is non-zero.
When only LRENPIE was set (and EOI count was zero), the LRENP bit was
wrongly set and MISR value was wrong.
As an additional consequence, if an hypervisor set ICH_HCR.LRENPIE,
the maintenance interrupt was constantly fired. It happens since patch
9cee1efe92 ("hw/intc: Set GIC maintenance interrupt level to only 0 or 1")
which fixed another bug about maintenance interrupt (most significant
bits of misr, including this one, were ignored in the interrupt trigger).
Fixes: 83f036fe3d ("hw/intc/arm_gicv3: Add accessors for ICH_ system registers")
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20211207094427.3473-1-damien.hedde@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmGuK9cACgkQnKSrs4Gr
c8gr7gf9Fe6WZ85sbefQcsOvqc6AKcmiC1dhQ9qsdT4Y22Ft8BneiVHPflkpYExP
12n4DB8QIasU/j3RognHNdsh/SYV07TfsVBNJHrO3Z2f83HrfDd3BhUV2DnJgul0
AjriZvwZUy+WSEpJ1oPBOsu1hAlNE4Os7euyMx7m4Y63sO9nngLQ5kwDsHZXfFgf
jyinZ87hbtZMchYJBm6YAGiSGmdYMLbDU4/wj8tn61cF+uikMFU1CrdYQrZbHcFX
X+WC6nrSCay/3e+vD0zB7CK3Y9E+iuX52mwkwATx5aTJaHvmNtDXDb+ENI0am2uX
19XnpS5UGjuvca+1Su9gvvloVG5TSA==
=iOTh
-----END PGP SIGNATURE-----
Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
# gpg: Signature made Mon 06 Dec 2021 07:27:19 AM PST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
virtio-blk: Fix clean up of host notifiers for single MR transaction.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The code that introduced "virtio-blk: Configure all host notifiers in
a single MR transaction" introduced a second loop variable to perform
cleanup in second loop, but mistakenly still refers to the first
loop variable within the second loop body.
Fixes: d0267da614 ("virtio-blk: Configure all host notifiers in a single MR transaction")
Signed-off-by: Mark Mielke <mark.mielke@gmail.com>
Message-id: CALm7yL08qarOu0dnQkTN+pa=BSRC92g31YpQQNDeAiT4yLZWQQ@mail.gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This reverts commit 7852a77f59.
The check is bogus as it ends up finding itself and falling over.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/733
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206095209.2332376-1-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
load_elf() gives negative return in case of error, not zero.
Fixes: 10e3f30ff7 ("hw/mips/boston: Allow loading elf kernel and dtb")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211130211729.7116-3-jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
bl_gen_write_ulong uses sd for both 32 and 64 bit CPU,
while sd is illegal on 32 bit CPUs.
Replace sd with sw on 32bit CPUs.
Fixes: 3ebbf86128 ("hw/mips: Add a bootloader helper")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211130211729.7116-2-jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Guest might select another drive on the bus by setting the
DRIVE_SEL bit of the DIGITAL OUTPUT REGISTER (DOR).
The current controller model doesn't expect a BlockBackend
to be NULL. A simple way to fix CVE-2021-20196 is to create
an empty BlockBackend when it is missing. All further
accesses will be safely handled, and the controller state
machines keep behaving correctly.
Cc: qemu-stable@nongnu.org
Fixes: CVE-2021-20196
Reported-by: Gaoning Pan (Ant Security Light-Year Lab) <pgn@zju.edu.cn>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20211124161536.631563-3-philmd@redhat.com
BugLink: https://bugs.launchpad.net/qemu/+bug/1912780
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/338
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
We are going to re-use this code in the next commit,
so extract it as a new blk_create_empty_drive() function.
Inspired-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20211124161536.631563-2-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
When updating the R bit of a PTE, the Hash64 MMU was using a wrong byte
offset, causing the first byte of the adjacent PTE to be corrupted.
This caused a panic when booting FreeBSD, using the Hash MMU.
Fixes: a2dd4e83e7 ("ppc/hash64: Rework R and C bit updates")
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Lots of small fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmGk2o4PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpAP0H/i47erp9gRr4XXUd71mhwVeIj7SOwGIJYvuf
YAHnFPu/Hvtl0zMQ3tHsUFV4ak7SeyJpqTIspTrhRF5WN9RB2drF+bVEUM+zVLiC
dNpstDu1E3Po3RBMLwVBQK0fheo+n680wmgiB5I4H9xTukszRmRm3evIjZQpMwZ+
Gx9WLW4ghG3fRJyXbZFDzOW2nlD/LUIQQ9ZZk9no3jULzbFS5hDFP1yxTOKZOGYk
JeITGHx+ODIIBla5KIUkH2yDYurHvKoOzpxo1qLr65EmVMuq4TT1DjaAM0SRg8YO
X+osx1AZRW7ZznYOUEiJuWru8QDM/BD0t91oR1kZAaEdaF3gYB8=
=w54r
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci,pc: bugfixes
Lots of small fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 29 Nov 2021 02:50:06 PM CET
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
Fix bad overflow check in hw/pci/pcie.c
intel-iommu: ignore leaf SNP bit in scalable mode
virtio-balloon: correct used length
virtio-balloon: process all in sgs for free_page_vq
vdpa: Add dummy receive callback
failover: fix unplug pending detection
virtio-mmio : fix the crash in the vm shutdown
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Orginal qemu commit hash:14d02cfbe4adaeebe7cb833a8cc71191352cf03b
In function pcie_add_capability, an assert contains the
"offset < offset + size" expression.
Both variable offset and variable size are uint16_t,
the comparison is always true due to type promotion.
The next expression may be the same.
It might be like this:
Thread 1 "qemu-system-x86" hit Breakpoint 1, pcie_add_capability (
dev=0x555557ce5f10, cap_id=1, cap_ver=2 '\002', offset=256, size=72)
at ../hw/pci/pcie.c:930
930 {
(gdb) n
931 assert(offset >= PCI_CONFIG_SPACE_SIZE);
(gdb) n
932 assert(offset < offset + size);
(gdb) p offset
$1 = 256
(gdb) p offset < offset + size
$2 = 1
(gdb) set offset=65533
(gdb) p offset < offset + size
$3 = 1
(gdb) p offset < (uint16_t)(offset + size)
$4 = 0
Signed-off-by: Daniella Lee <daniellalee111@gmail.com>
Message-Id: <20211126061324.47331-1-daniellalee111@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When booting with scalable mode, I hit this error:
qemu-system-x86_64: vtd_iova_to_slpte: detected splte reserve non-zero iova=0xfffff002, level=0x1slpte=0x102681803)
qemu-system-x86_64: vtd_iommu_translate: detected translation failure (dev=01:00:00, iova=0xfffff002)
qemu-system-x86_64: New fault is not recorded due to compression of faults
This is because the SNP bit is set for second level page table since
Linux kernel commit 6c00612d0cba1 ("iommu/vt-d: Report right snoop
capability when using FL for IOVA") even if SC is not supported by the
hardware.
To unbreak the guest, ignore the leaf SNP bit for scalable mode
first. In the future we may consider to add SC support.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211129033618.3857-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Spec said:
"and len the total of bytes written into the buffer."
For inflateq, deflateq and statsq, we don't process in_sg so the used
length should be zero. For free_page_vq, tough the pages could be
changed by the device (in the destination), spec said:
"Note: len is particularly useful for drivers using untrusted buffers:
if a driver does not know exactly how much has been written by the
device, the driver would have to zero the buffer in advance to ensure
no data leakage occurs."
So 0 should be used as well here.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211129030841.3611-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
We only process the first in sg which may lead to the bitmap of the
pages belongs to following sgs were not cleared. This may result more
pages to be migrated. Fixing this by process all in sgs for
free_page_vq.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211129030841.3611-1-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is valid for an OS to put virtual interrupt ID values into the
list registers ICH_LR<n> which are greater than 1023. This
corresponds to (for example) KVM using the in-kernel emulated ITS to
give a (nested) guest an ITS. LPIs are delivered by the L1 kernel to
the L2 guest via the list registers in the same way as non-LPI
interrupts.
QEMU's code for handling writes to ICV_IARn (which happen when the L2
guest acknowledges an interrupt) and to ICV_EOIRn (which happen at
the end of the interrupt) did not consider LPIs, so it would
incorrectly treat interrupt IDs above 1023 as invalid. Fix this by
using the correct condition, which is gicv3_intid_is_special().
Note that the condition in icv_dir_write() is correct -- LPIs
are not valid there and so we want to ignore both "special" ID
values and LPIs.
(In the pseudocode this logic is in:
- VirtualReadIAR0(), VirtualReadIAR1(), which call IsSpecial()
- VirtualWriteEOIR0(), VirtualWriteEOIR1(), which call
VirtualIdentifierValid(data, TRUE) meaning "LPIs OK"
- VirtualWriteDIR(), which calls VirtualIdentifierValid(data, FALSE)
meaning "LPIs not OK")
This bug doesn't seem to have any visible effect on Linux L2 guests
most of the time, because the two bugs cancel each other out: we
neither mark the interrupt active nor deactivate it. However it does
mean that the L2 vCPU priority while the LPI handler is running will
not be correct, so the interrupt handler could be unexpectedly
interrupted by a different interrupt.
(NB: this has nothing to do with using QEMU's emulated ITS.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Failover needs to detect the end of the PCI unplug to start migration
after the VFIO card has been unplugged.
To do that, a flag is set in pcie_cap_slot_unplug_request_cb() and reset in
pcie_unplug_device().
But since
17858a1695 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35")
we have switched to ACPI unplug and these functions are not called anymore
and the flag not set. So failover migration is not able to detect if card
is really unplugged and acts as it's done as soon as it's started. So it
doesn't wait the end of the unplug to start the migration. We don't see any
problem when we test that because ACPI unplug is faster than PCIe native
hotplug and when the migration really starts the unplug operation is
already done.
See c000a9bd06 ("pci: mark device having guest unplug request pending")
a99c4da9fc ("pci: mark devices partially unplugged")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20211118133225.324937-4-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The root cause for this crash is the ioeventfd not stopped while the VM stop.
The callback for vmstate_change was not implement in virtio-mmio bus
Reproduce step
load the vm with
-M microvm \
-netdev tap,id=net0,vhostforce,script=no,downscript=no \
-device virtio-net-device,netdev=net0\
After the VM boot, login the vm and then shutdown the vm
System will crash
[Current thread is 1 (Thread 0x7ffff6edde00 (LWP 374378))]
(gdb) bt
0 0x00005555558f18b4 in qemu_flush_or_purge_queued_packets (purge=false, nc=0x55500252e850) at ../net/net.c:636
1 qemu_flush_queued_packets (nc=0x55500252e850) at ../net/net.c:656
2 0x0000555555b6c363 in virtio_queue_notify_vq (vq=0x7fffe7e2b010) at ../hw/virtio/virtio.c:2339
3 virtio_queue_host_notifier_read (n=0x7fffe7e2b08c) at ../hw/virtio/virtio.c:3583
4 0x0000555555de7b5a in aio_dispatch_handler (ctx=ctx@entry=0x5555567c5780, node=0x555556b83fd0) at ../util/aio-posix.c:329
5 0x0000555555de8454 in aio_dispatch_ready_handlers (ready_list=<optimized out>, ctx=<optimized out>) at ../util/aio-posix.c:359
6 aio_poll (ctx=0x5555567c5780, blocking=blocking@entry=false) at ../util/aio-posix.c:662
7 0x0000555555cce0cc in monitor_cleanup () at ../monitor/monitor.c:645
8 0x0000555555b06bd2 in qemu_cleanup () at ../softmmu/runstate.c:822
9 0x000055555586e693 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at ../softmmu/main.c:51
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211109023744.22387-1-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The GICv3/v4 pseudocode has a function IsSpecial() which returns true
if passed a "special" interrupt ID number (anything between 1020 and
1023 inclusive). We open-code this condition in a couple of places,
so abstract it out into a new function gicv3_intid_is_special().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The logic of gicv3_redist_update() is as follows:
* it must be called in any code path that changes the state of
(only) redistributor interrupts
* if it finds a redistributor interrupt that is (now) higher
priority than the previous highest-priority pending interrupt,
then this must be the new highest-priority pending interrupt
* if it does *not* find a better redistributor interrupt, then:
- if the previous state was "no interrupts pending" then
the new state is still "no interrupts pending"
- if the previous best interrupt was not a redistributor
interrupt then that remains the best interrupt
- if the previous best interrupt *was* a redistributor interrupt,
then the new best interrupt must be some non-redistributor
interrupt, but we don't know which so must do a full scan
In commit 17fb5e36aa we effectively added the LPI interrupts
as a kind of "redistributor interrupt" for this purpose, by adding
cs->hpplpi to the set of things that gicv3_redist_update() considers
before it gives up and decides to do a full scan of distributor
interrupts. However we didn't quite get this right:
* the condition check for "was the previous best interrupt a
redistributor interrupt" must be updated to include LPIs
in what it considers to be redistributor interrupts
* every code path which updates the LPI state which
gicv3_redist_update() checks must also call gicv3_redist_update():
this is cs->hpplpi and the GICR_CTLR ENABLE_LPIS bit
This commit fixes this by:
* correcting the test on cs->hppi.irq in gicv3_redist_update()
* making gicv3_redist_update_lpi() always call gicv3_redist_update()
* introducing a new gicv3_redist_update_lpi_only() for the one
callsite (the post-load hook) which must not call
gicv3_redist_update()
* making gicv3_redist_lpi_pending() always call gicv3_redist_update(),
either directly or via gicv3_redist_update_lpi()
* removing a couple of now-unnecessary calls to gicv3_redist_update()
from some callers of those two functions
* calling gicv3_redist_update() when the GICR_CTLR ENABLE_LPIS
bit is cleared
(This means that the not-file-local gicv3_redist_* LPI related
functions now all take care of the updates of internally cached
GICv3 information, in the same way the older functions
gicv3_redist_set_irq() and gicv3_redist_send_sgi() do.)
The visible effect of this bug was that when the guest acknowledged
an LPI by reading ICC_IAR1_EL1, we marked it as not pending in the
LPI data structure but still left it in cs->hppi so we would offer it
to the guest again. In particular for setups using an emulated GICv3
and ITS and using devices which use LPIs (ie PCI devices) a Linux
guest would complain "irq 54: nobody cared" and then hang. (The hang
was intermittent, presumably depending on the timing between
different interrupts arriving and being completed.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20211124202005.989935-1-peter.maydell@linaro.org
When Enabled bit is cleared in GITS_CTLR,ITS feature continues
to be enabled.This patch fixes the issue.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20211124182246.67691-1-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The virt machine has properties to enable MTE and Nested Virtualization
support. However, its check to ensure the backing accel implementation
supports it today only looks for KVM and bails out if it finds it.
Extend the checks to HVF as well as it does not support either today.
This will cause QEMU to print a useful error message rather than
silently ignoring the attempt by the user to enable either MTE or
the Virtualization extensions.
Reported-by: saar amar <saaramar5@gmail.com>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Message-id: 20211123122859.22452-1-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 18f6290a6a ("hw/intc: GICv3 ITS initial framework")
incremented version_id and minimum_version_id fields of
VMStateDescription vmstate_its. This breaks the migration between
6.2 and 6.1 with the following message:
qemu-system-aarch64: savevm: unsupported version 1 for 'arm_gicv3_its' v0
qemu-system-aarch64: load of migration failed: Invalid argument
Revert that change.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20211122171020.1195483-1-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Once a "One Time Programmable" is programmed, it shouldn't be reset.
Do not re-initialize the OTP content in the DeviceReset handler,
initialize it once in the DeviceRealize one.
Fixes: 9fb45c62ae ("riscv: sifive: Implement a model for SiFive FU540 OTP")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211119104757.331579-1-f4bug@amsat.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Configuring a drive with "if=none" is meant for creation of a backend
only, it should not get automatically assigned to a device frontend.
Use "if=pflash" for the One-Time-Programmable device instead (like
it is e.g. also done for the efuse device in hw/arm/xlnx-zcu102.c).
Since the old way of configuring the device has already been published
with the previous QEMU versions, we cannot remove this immediately, but
have to deprecate it and support it for at least two more releases.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211119102549.217755-1-thuth@redhat.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The ESCC datasheet states that SPEC_ALLSENT is always set in sync mode and set
in async mode once all characters have cleared the transmitter. Since writes to
SERIAL_DATA use a synchronous chardev API, the guest can never see the state when
transmission is in progress so it is possible to set SPEC_ALLSENT in the
R_SPEC register unconditionally.
This fixes a hang when using the Sun PROM as it attempts to enumerate the
onboard serial devices, and a similar hang in OpenBSD SPARC32 where in both cases
the boot process will not proceed until SPEC_ALLSENT has been set after writing
to W_TXCTRL1.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20211118181835.18497-3-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The "Transmit Interrupts and Transmit Buffer Empty Bit" section of the ESCC
datasheet states the following about the STATUS_TXEMPTY bit: "After a hardware
reset (including a hardware reset by software), or a channel reset, this bit
is set to 1".
Update escc_reset() to set the STATUS_TXEMPTY bit in the R_STATUS register
on device reset as described which fixes a regression whereby the Sun PROM
checks this bit early on startup and gets stuck in an infinite loop if it is
not set.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20211118181835.18497-2-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGXb2kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNkQggArLP8V1vL9XW9LJ6v4UdO4dp78MRb
mP5zZhzY6CZ9NnbLW3rtS8GLrQ7XJdHl4huVIckIF3HW+TOBas2gXOiyWdskZRFS
UGSoeejj2RHmTzBKWZN77G/GB0ElyKt3wvXeCEx0F8yiJXZhkw6n6tp3U/lGnic3
sJmniTBZ+m3GGtrAaEL11x8ITdtdGEE4uIhspqN8X0kU+WkSsklm8+GAORzMpWGq
Fqo46dd1C+st1GvbDOnghltYOEPPyKE6pZYOnZwB8X8hi01Ex53wXBXl98G8r8rt
qA6P0lc5Eh8E3M7xm+kJBw1XNSkxjQioJ1SElmQFW5w5rVtYVSDEsaL4MQ==
=3kjz
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
Bugfixes for 6.2.
# gpg: Signature made Fri 19 Nov 2021 10:33:29 AM CET
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
chardev/wctable: don't free the instance in wctablet_chr_finalize
meson.build: Support ncurses on MacOS and OpenBSD
docs: Spell QEMU all caps
qtest/am53c974-test: add test for reset before transfer
esp: ensure that async_len is reset to 0 during esp_hard_reset()
nvmm: Fix support for stable version
meson: fix botched compile check conversions
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* fix pmu vmstate
* Fix compile of byte_reverse on new compilers
-----BEGIN PGP SIGNATURE-----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=jJBv
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20211119' of https://github.com/legoater/qemu into staging
ppc 6.2 queue:
* fix pmu vmstate
* Fix compile of byte_reverse on new compilers
# gpg: Signature made Fri 19 Nov 2021 12:49:30 PM CET
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-ppc-20211119' of https://github.com/legoater/qemu:
tests/tcg/ppc64le: Fix compile flags for byte_reverse
pmu: fix pmu vmstate subsection list
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If a reset command is sent after data has been transferred into the SCSI buffer
ensure that async_len is reset to 0. Otherwise a subsequent TI command assumes
the SCSI buffer contains data to be transferred to the device causing it to
dereference the stale async_buf pointer.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/724
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211118100327.29061-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change namespaces to be shared namespaces by default (parameter
shared=on). Keep shared=off for older machine types.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
With commit 5ffbaeed16 ("hw/nvme: fix controller hot unplugging")
namespaces get moved from the controller to the subsystem if one
is specified.
That keeps the namespaces alive after a controller hot-unplug, but
after a controller hotplug we have to reconnect the namespaces
from the subsystem to the controller.
Fixes: 5ffbaeed16 ("hw/nvme: fix controller hot unplugging")
Cc: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
[k.jensen: only attach to shared and non-detached namespaces]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
While activating device in vmxnet3_acticate_device(), it does not
validate guest supplied configuration values against predefined
minimum - maximum limits. This may lead to integer overflow or
OOB access issues. Add checks to avoid it.
Fixes: CVE-2021-20203
Buglink: https://bugs.launchpad.net/qemu/+bug/1913873
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
hostwin is allocated and added to hostwin_list in vfio_host_win_add, but
it is only deleted from hostwin_list in vfio_host_win_del, which causes
a memory leak. Also, freeing all elements in hostwin_list is missing in
vfio_disconnect_container.
Fix: 2e4109de8e ("vfio/spapr: Create DMA window dynamically (SPAPR IOMMU v2)")
CC: qemu-stable@nongnu.org
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Link: https://lore.kernel.org/r/20211117014739.1839263-1-liangpeng10@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The subsection is not closed by a NULL marker so this can trigger
a segfault when the pmu vmstate is saved.
This can be easily shown with:
$ ./qemu-system-ppc64 -dump-vmstate vmstate.json
Segmentation fault (core dumped)
Fixes: d811d61fbc ("mac_newworld: add PMU device")
Cc: mark.cave-ayland@ilande.co.uk
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
pci power management fixes
acpi hotplug fixes
misc other fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmGSh40PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpH2AH/RLY+ONL98GT4D+hi8MGCOhN669jrPbAqJ1L
l9p2GxDoXSD4PCDReU3VCzLtRsxsv/camgMx/DnDxaZtdgKm8SlXGJutMtNHpTY6
PHZLMLoixZSsKi6Tm3xGut/FSzsTZl4Gc3rqwaryHQLqptNO+XQJSBmP+oEAdjAd
nKVepHRveOTVVBBzCmoNpFA+BEXRTItdfG0ZKprPkXUobc2jeV7ymkTX9s2OBLEf
/pE49tZj1K4ab8g4+RY4cFEFoDZbXZ55Aq3ck5LAb47qIr/1cXPVP7PxINmasy4Y
H+oTUpWLBM7rFbdP/GBFANu5HkEQ5pnjeosWYOKsopE4UFCyDxc=
=y9C8
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
pci,pc,virtio: bugfixes
pci power management fixes
acpi hotplug fixes
misc other fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 15 Nov 2021 05:15:09 PM CET
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
pcie: expire pending delete
pcie: fast unplug when slot power is off
pcie: factor out pcie_cap_slot_unplug()
pcie: add power indicator blink check
pcie: implement slot power control for pcie root ports
pci: implement power state
vdpa: Check for existence of opts.vhostdev
vdpa: Replace qemu_open_old by qemu_open at
virtio: use virtio accessor to access packed event
virtio: use virtio accessor to access packed descriptor flags
tests: bios-tables-test update expected blobs
hw/i386/acpi-build: Deny control on PCIe Native Hot-plug in _OSC
bios-tables-test: Allow changes in DSDT ACPI tables
hw/acpi/ich9: Add compat prop to keep HPC bit set for 6.1 machine type
pcie: rename 'native-hotplug' to 'x-native-hotplug'
hw/mem/pc-dimm: Restrict NUMA-specific code to NUMA machines
vhost: Fix last vq queue index of devices with no cvq
vhost: Rename last_index to vq_index_end
softmmu/qdev-monitor: fix use-after-free in qdev_set_id()
net/vhost-vdpa: fix memory leak in vhost_vdpa_get_max_queue_pairs()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The PL031 currently is not able to report guest RTC change to the QMP
monitor as opposed to mc146818 or spapr RTCs. This patch adds the call
to qapi_event_send_rtc_change() when the Load Register is written. The
value which is reported corresponds to the difference between the guest
reference time and the reference time kept in softmmu/rtc.c.
For instance adding 20s to the guest RTC value will report 20. Adding
an extra 20s to the guest RTC value will report 20 + 20 = 40.
The inclusion of qapi/qapi-types-misc-target.h in hw/rtl/pl031.c
require to compile the PL031 with specific_ss.add() to avoid
./qapi/qapi-types-misc-target.h:18:13: error: attempt to use poisoned
"TARGET_<ARCH>".
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210920122535.269988-1-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Our GICv3 QOM interface includes an array property
redist-region-count which allows board models to specify that the
registributor registers are not in a single contiguous range, but
split into multiple pieces. We implemented this for KVM, but
currently the TCG GICv3 model insists that there is only one region.
You can see the limit being hit with a setup like:
qemu-system-aarch64 -machine virt,gic-version=3 -smp 124
Add support for split regions to the TCG GICv3. To do this we switch
from allocating a simple array of MemoryRegions to an array of
GICv3RedistRegion structs so that we can use the GICv3RedistRegion as
the opaque pointer in the MemoryRegion read/write callbacks. Each
GICv3RedistRegion contains the MemoryRegion, a backpointer allowing
the read/write callback to get hold of the GICv3State, and an index
which allows us to calculate which CPU's redistributor is being
accessed.
Note that arm_gicv3_kvm always passes in NULL as the ops argument
to gicv3_init_irqs_and_mmio(), so the only MemoryRegion read/write
callbacks we need to update to handle this new scheme are the
gicv3_redist_read/write functions used by the emulated GICv3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The 'Last' bit in the GICR_TYPER GICv3 redistributor register is
supposed to be set to 1 if this is the last redistributor in a series
of contiguous redistributor pages. Currently we set Last only for
the redistributor for CPU (num_cpu - 1). This only works if there is
a single redistributor region; if there are multiple redistributor
regions then we need to set the Last bit for the last redistributor
in each region.
This doesn't cause any problems currently because only the KVM GICv3
supports multiple redistributor regions, and it ignores the value in
GICv3State::gicr_typer. But we need to fix this before we can enable
support for multiple regions in the emulated GICv3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The GICv3 devices have an array property redist-region-count.
Currently we check this for errors (bad values) in
gicv3_init_irqs_and_mmio(), just before we use it. Move this error
checking to the arm_gicv3_common_realize() function, where we
sanity-check all of the other base-class properties. (This will
always be before gicv3_init_irqs_and_mmio() is called, because
that function is called in the subclass realize methods, after
they have called the parent-class realize.)
The motivation for this refactor is:
* we would like to use the redist_region_count[] values in
arm_gicv3_common_realize() in a subsequent patch, so we need
to have already done the sanity-checking first
* this removes the only use of the Error** argument to
gicv3_init_irqs_and_mmio(), so we can remove some error-handling
boilerplate
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add an expire time for pending delete, once the time is over allow
pressing the attention button again.
This makes pcie hotplug behave more like acpi hotplug, where one can
try sending an 'device_del' monitor command again in case the guest
didn't respond to the first attempt.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211111130859.1171890-7-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In case the slot is powered off (and the power indicator turned off too)
we can unplug right away, without round-trip to the guest.
Also clear pending attention button press, there is nothing to care
about any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211111130859.1171890-6-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211111130859.1171890-5-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Refuse to push the attention button in case the guest is busy with some
hotplug operation (as indicated by the power indicator blinking).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211111130859.1171890-4-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With this patch hot-plugged pci devices will only be visible to the
guest if the guests hotplug driver has enabled slot power.
This should fix the hot-plug race which one can hit when hot-plugging
a pci device at boot, while the guest is in the middle of the pci bus
scan.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211111130859.1171890-3-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows to power off pci devices. In "off" state the devices will
not be visible. No pci config space access, no pci bar access, no dma.
Default state is "on", so this patch (alone) should not change behavior.
Use case: Allows hotplug controllers implement slot power. Hotplug
controllers doing so should set the inital power state for devices in
the ->plug callback.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211111130859.1171890-2-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to access packed descriptor event and off_wrap via
address_space_{write|read}_cached(). When we hit the cache, memcpy()
is used which is not atomic which may lead a wrong value to be read or
wrote.
This patch fixes this by switching to use
virito_{stw|lduw}_phys_cached() to make sure the access is atomic.
Fixes: 683f766567 ("virtio: event suppression support for packed ring")
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211111063854.29060-2-jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to access packed descriptor flags via
address_space_{write|read}_cached(). When we hit the cache, memcpy()
is used which is not an atomic operation which may lead a wrong value
is read or wrote.
So this patch switches to use virito_{stw|lduw}_phys_cached() to make
sure the aceess is atomic.
Fixes: 86044b24e8 ("virtio: basic packed virtqueue support")
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211111063854.29060-1-jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are two ways to enable ACPI PCI Hot-plug:
* Disable the Hot-plug Capable bit on PCIe slots.
This was the first approach which led to regression [1-2], as
I/O space for a port is allocated only when it is hot-pluggable,
which is determined by HPC bit.
* Leave the HPC bit on and disable PCIe Native Hot-plug in _OSC
method.
This removes the (future) ability of hot-plugging switches with PCIe
Native hotplug since ACPI PCI Hot-plug only works with cold-plugged
bridges. If the user wants to explicitely use this feature, they can
disable ACPI PCI Hot-plug with:
--global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off
Change the bit in _OSC method so that the OS selects ACPI PCI Hot-plug
instead of PCIe Native.
[1] https://gitlab.com/qemu-project/qemu/-/issues/641
[2] https://bugzilla.redhat.com/show_bug.cgi?id=2006409
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211112110857.3116853-5-imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To solve issues [1-2] the Hot Plug Capable bit in PCIe Slots will be
turned on, while the switch to ACPI Hot-plug will be done in the
DSDT table.
Introducing 'x-keep-native-hpc' property disables the HPC bit only
in 6.1 and as a result keeps the forced 'reserve-io' on
pcie-root-ports in 6.1 too.
[1] https://gitlab.com/qemu-project/qemu/-/issues/641
[2] https://bugzilla.redhat.com/show_bug.cgi?id=2006409
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211112110857.3116853-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Mark property as experimental/internal adding 'x-' prefix.
Property was introduced in 6.1 and it should have provided
ability to turn on native PCIE hotplug on port even when
ACPI PCI hotplug is in use is user explicitly sets property
on CLI. However that never worked since slot is wired to
ACPI hotplug controller.
Another non-intended usecase: disable native hotplug on slot
when APCI based hotplug is disabled, which works but slot has
'hotplug' property for this taks.
It should be relatively safe to rename it to experimental
as no users should exist for it and given that the property
is broken we don't really want to leave it around for much
longer lest users start using it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20211112110857.3116853-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Fix of a regression in floating point load instructions (Matheus)
* Associativity fix for pseries machine (Daniel)
* tlbivax fix for BookE machines (Danel)
-----BEGIN PGP SIGNATURE-----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=E3d7
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20211112' of https://github.com/legoater/qemu into staging
ppc 6.2 queue :
* Fix of a regression in floating point load instructions (Matheus)
* Associativity fix for pseries machine (Daniel)
* tlbivax fix for BookE machines (Danel)
# gpg: Signature made Fri 12 Nov 2021 12:11:29 PM CET
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-ppc-20211112' of https://github.com/legoater/qemu:
ppc/mmu_helper.c: do not truncate 'ea' in booke206_invalidate_ea_tlb()
spapr_numa.c: fix FORM1 distance-less nodes
target/ppc: Fix register update on lf[sd]u[x]/stf[sd]u[x]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* force_rcu notifiers
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGMQFwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPDcAf8CBwO73zxJd0Z3eHzgiSlDavb+ORy
vXkgGNMHBavaO+QuKzWrzuz42+6r+BW3mlMLEWGyEUGq7ZLbAwTGQ+zT+La8J+TG
xK872G8skl1j9Xb1TL7t/DeT9ja4MlZbB0LehFa/GIgh2V6mFjXTzH05PH5p9hd0
M8JGiLtrPEcIv4Df+T3pxbuQy45FqD4hLtEZJW4mKUm2oywxwHOLFty5+VVRxw5h
Rl5Xuf5UfhAdmmBIyIjhVcVGJf+I2Fg7M+6uf62RQ2SlVdg2ufanEL2uCYYPt4sD
kDbybursvyqf1IW4LF0vP2KznQE2Hckj6FeACYw32HrlQT6UzX7nbu2TdA==
=70MJ
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Fixes for SGX
* force_rcu notifiers
# gpg: Signature made Wed 10 Nov 2021 10:57:48 PM CET
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
sgx: Reset the vEPC regions during VM reboot
numa: avoid crash with SGX and "info numa"
accel/tcg: Register a force_rcu notifier
rcu: Introduce force_rcu notifier
target/i386: sgx: mark device not user creatable
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When trying to use the pc-dimm device on a non-NUMA machine, we get:
$ qemu-system-arm -M none -cpu max -S \
-object memory-backend-file,id=mem1,size=1M,mem-path=/tmp/1m \
-device pc-dimm,id=dimm1,memdev=mem1
Segmentation fault (core dumped)
(gdb) bt
#0 pc_dimm_realize (dev=0x555556da3e90, errp=0x7fffffffcd10) at hw/mem/pc-dimm.c:184
#1 0x0000555555fe1f8f in device_set_realized (obj=0x555556da3e90, value=true, errp=0x7fffffffce18) at hw/core/qdev.c:531
#2 0x0000555555feb4a9 in property_set_bool (obj=0x555556da3e90, v=0x555556e54420, name=0x5555563c3c41 "realized", opaque=0x555556a704f0, errp=0x7fffffffce18) at qom/object.c:2257
To avoid that crash, restrict the pc-dimm NUMA check to machines
supporting NUMA, and do not allow the use of 'node' property on
non-NUMA machines.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211106145016.611332-1-f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The -1 assumes that cvq device model is accounted in data_queue_pairs,
if cvq does not exists, but it's actually the opposite: Devices with
!cvq are ok but devices with cvq does not add the last queue to
data_queue_pairs.
This is not a problem to vhost-net, but it is to vhost-vdpa:
* Devices with cvq gets initialized at last data vq device model, not
at cvq one.
* Devices with !cvq never gets initialized, since last_index is the
first queue of the last device model.
Because of that, the right change in last_index is to actually add the
cvq, not to remove the missing one.
This is not a problem to vhost-net, but it is to vhost-vdpa, which
device model trust to reach the last index to finish starting the
device.
Also, as the previous commit, rename it to index_end.
Tested with vp_vdpa with host's vhost=on and vhost=off, with ctrl_vq=on
and ctrl_vq=off.
Fixes: 049eb15b5f ("vhost: record the last virtqueue index for the virtio device")
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211104085625.2054959-3-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The doc of this field pointed out that last_index is the last vq index.
This is misleading, since it's actually one past the end of the vqs.
Renaming and modifying comment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211104085625.2054959-2-eperezma@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For bare-metal SGX on real hardware, the hardware provides guarantees
SGX state at reboot. For instance, all pages start out uninitialized.
The vepc driver provides a similar guarantee today for freshly-opened
vepc instances, but guests such as Windows expect all pages to be in
uninitialized state on startup, including after every guest reboot.
Qemu can invoke the ioctl to bring its vEPC pages back to uninitialized
state. There is a possibility that some pages fail to be removed if they
are SECS pages, and the child and SECS pages could be in separate vEPC
regions. Therefore, the ioctl returns the number of EREMOVE failures,
telling Qemu to try the ioctl again after it's done with all vEPC regions.
The related kernel patches:
Link: https://lkml.kernel.org/r/20211021201155.1523989-3-pbonzini@redhat.com
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211101162009.62161-6-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 71e6fae3a9 fixed an issue with FORM2 affinity guests with NUMA
nodes in which the distance info is absent in
machine_state->numa_state->nodes. This happens when QEMU adds a default
NUMA node and when the user adds NUMA nodes without specifying the
distances.
During the discussions of the forementioned patch [1] it was found that
FORM1 guests were behaving in a strange way in the same scenario, with
the kernel seeing the distances between the nodes as '160', as we can
see in this example with 4 NUMA nodes without distance information:
$ numactl -H
available: 4 nodes (0-3)
(...)
node distances:
node 0 1 2 3
0: 10 160 160 160
1: 160 10 160 160
2: 160 160 10 160
3: 160 160 160 10
Turns out that we have the same problem with FORM1 guests - we are
calculating associativity domain using zeroed values. And as it also
turns out, the solution from 71e6fae3a9 applies to FORM1 as well.
This patch creates a wrapper called 'get_numa_distance' that contains
the logic used in FORM2 to define node distances when this information
is absent. This helper is then used in all places where we need to read
distance information from machine_state->numa_state->nodes. That way
we'll guarantee that the NUMA node distance is always being curated
before being used.
After this patch, the FORM1 guest mentioned above will have the
following topology:
$ numactl -H
available: 4 nodes (0-3)
(...)
node distances:
node 0 1 2 3
0: 10 20 20 20
1: 20 10 20 20
2: 20 20 10 20
3: 20 20 20 10
This is compatible with what FORM2 guests and other archs do in this
case.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-11/msg01960.html
Fixes: 690fbe4295 ("spapr_numa: consider user input when defining associativity")
CC: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
CC: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add the MEMORY_DEVICE_INFO_KIND_SGX_EPC case, so that enclave
memory is included in the output of "info numa" instead of crashing
the monitor.
Fixes: a7c565a941 ("sgx-epc: Add the fill_device_info() callback support", 2021-09-30)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The device is created by the machine based on the sgx-epc property.
It should not be created by users.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rewrite the function using g_string_append_printf() rather than
g_strdup_printf()/g_strconcat().
Fixes: df8abbbadf ("macfb: add common monitor modes supported by the MacOS toolbox ROM")
Cc: mark.cave-ayland@ilande.co.uk
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20211105165254.3544369-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
A configuration that specifies multiple nodes without distance info
results in the non-local points in the FORM2 matrix having a distance of
0. This causes Linux to complain "Invalid distance value range" because
a node distance is smaller than the local distance.
Fix this by building a simple local / remote fallback for points where
distance information is missing.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20211105135137.1584840-1-npiggin@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Test is wrong and the backend can never updated. It could have led to
a QEMU crash but since the firmware deactivates flash access if a valid
layout is not detected, it went unnoticed.
Reported-by: Coverity CID 1465223
Fixes: 35dde57662 ("ppc/pnv: Add a PNOR model")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211102162905.762078-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This avoids an off-by-one read of 'mode_sense_valid' buffer in
hw/scsi/scsi-disk.c:mode_sense_page().
Fixes: CVE-2021-3930
Cc: qemu-stable@nongnu.org
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: a8f4bbe290 ("scsi-disk: store valid mode pages in a table")
Fixes: #546
Reported-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=O6Wg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kraxel/tags/egl-20211105-pull-request' into staging
gtk: a collection of egl fixes.
# gpg: Signature made Fri 05 Nov 2021 07:30:21 AM EDT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
* remotes/kraxel/tags/egl-20211105-pull-request:
ui/gtk-egl: blitting partial guest fb to the proper scanout surface
ui/gtk: gd_draw_event returns FALSE when no cairo surface is bound
ui/gtk-egl: guest fb texture needs to be regenerated when reinitializing egl
ui/gtk-egl: make sure the right context is set as the current
ui/gtk-egl: un-tab and re-tab should destroy egl surface and context
virtio-gpu: splitting one extended mode guest fb into n-scanouts
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When guest is running Linux/X11 with extended multiple displays mode enabled,
the guest shares one scanout resource each time containing whole surface
rather than sharing individual display output separately. This extended frame
is properly splited and rendered on the corresponding scanout surfaces but
not in case of blob-resource (zero copy).
This code change lets the qemu split this one large surface data into multiple
in case of blob-resource as well so that each sub frame then can be blitted
properly to each scanout.
v2: resizing qemu console in virtio_gpu_update_dmabuf to scanout's width and
height
v3: updating stub function of virtio_gpu_update_dmabuf to match the type
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20211104065153.28897-5-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
hw_compat_5_2 has an issue: it affects only "virtio-net-pci"
but not "virtio-net-pci-transitional" and
"virtio-net-pci-non-transitional". The solution is to use the
"virtio-net-pci-base" type in compat_props.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1999141
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The fact that the MMIO handler is not re-entrant causes an infinite
loop under certain conditions:
Guest write to TDT -> Loopback -> RX (DMA to TDT) -> TX
We now eliminate the effect of this problem locally in e1000, by adding
a boolean in struct E1000State indicating when the TX side is busy. This
will cause any entering new call to return early instead of interfering
with the ongoing work, and eliminates any risk of looping.
This is intended to address CVE-2021-20257.
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* DMA support in the multiboot option ROM
* Rename default-bus-bypass-iommu
* Deprecate -watchdog and cleanup -watchdog-action
* HVF fix for <PAGE_SIZE regions
* Support TSC scaling for AMD nested virtualization
* Fix for ESP fuzzing bug
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBUeEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOh+Qf+OMRhRiv6dYjbK/5zXrx81AgxYAY3
dBUSr8v16LyrMl1U3DZWzhD+MzQsC83m/Xsh4lGxlHDWtkK9QQA5xDG95JZdY26i
MGCbbjnFHISbyBQV9Y724gPfPjOOODuoFbzafSx6VLITOcyv1ye0cm7TOjOPB+tt
E4c3JqTZ7g8a5yMe8ItkVhz5pPY+oVw8dxMNRp6Sup5Dbfx0DjacIwLasLsHfPL7
qBADfqB20ovHUzLjXu7oWgEd4KxJ6kiSCaJJu/KD36hg0wB8+WVP1o43j4PkczHT
QjU7eZaeaTrN5Cf34ttPge6QReMi5SFNCaA9O9/HLqrQgdEtt/diZWuqjQ==
=a2mC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Build system fixes and cleanups
* DMA support in the multiboot option ROM
* Rename default-bus-bypass-iommu
* Deprecate -watchdog and cleanup -watchdog-action
* HVF fix for <PAGE_SIZE regions
* Support TSC scaling for AMD nested virtualization
* Fix for ESP fuzzing bug
# gpg: Signature made Tue 02 Nov 2021 10:57:37 AM EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* remotes/bonzini/tags/for-upstream: (27 commits)
configure: fix --audio-drv-list help message
configure: Remove the check for the __thread keyword
Move the l2tpv3 test from configure to meson.build
meson: remove unnecessary coreaudio test program
meson: remove pointless warnings
meson.build: Allow to disable OSS again
meson: bump submodule to 0.59.3
qtest/am53c974-test: add test for cancelling in-flight requests
esp: ensure in-flight SCSI requests are always cancelled
KVM: SVM: add migration support for nested TSC scaling
hw/i386: fix vmmouse registration
watchdog: remove select_watchdog_action
vl: deprecate -watchdog
watchdog: add information from -watchdog help to -device help
hw/i386: Rename default_bus_bypass_iommu
hvf: Avoid mapping regions < PAGE_SIZE as ram
configure: do not duplicate CPU_CFLAGS into QEMU_LDFLAGS
configure: remove useless NPTL probe
target/i386: use DMA-enabled multiboot ROM for new-enough QEMU machine types
optionrom: add a DMA-enabled multiboot ROM
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add gdb-xml for MVE
More uses of tcg_constant_* in target/arm
Fix parameter naming for default-bus-bypass-iommu
Ignore cache operations to mmio in HVF
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmGBgjkdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8sAAgAsHaW2sHH/W4TzCwl
DfqFar4u047Q+ZtQHjNehGHF9Bxp4NS4A0qL52vk0hVoqeWlyF1N29MOnewgVDqY
q1x+uxJtG9xjTse7oEEshEEFF/7J8eB8dN4E78TFn/6IhvVhGiUeeRu29s44Ot6N
E2KABcXfd+4gEdqhepLGEbi5n0TnA8ARmmeffZNWVEbsxQjHnMQQYmqGmllB3xV3
qPpnp3avvD1015zMwrLVmlDO+tSRr/1bed7k3k26ebga2B/zitxcpXFNCDlgePx0
LNT5QYvBDpE7HOruGQjf4iXPJHfYw5VMtopK7K++rY9KWiJgBVSjQUcB462sdCPk
wNAp0g==
=vlZ5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-arm-20211102-2' into staging
Add nuvoton sd module for NPCM7XX
Add gdb-xml for MVE
More uses of tcg_constant_* in target/arm
Fix parameter naming for default-bus-bypass-iommu
Ignore cache operations to mmio in HVF
# gpg: Signature made Tue 02 Nov 2021 02:23:53 PM EDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* remotes/rth/tags/pull-arm-20211102-2:
hvf: arm: Ignore cache operations on MMIO
hw/arm/virt: Rename default_bus_bypass_iommu
target/arm: Use tcg_constant_i32() in gen_rev16()
target/arm: Use tcg_constant_i64() in do_sat_addsub_64()
target/arm: Use the constant variant of store_cpu_field() when possible
target/arm: Introduce store_cpu_field_constant() helper
target/arm: Use tcg_constant_i32() in op_smlad()
target/arm: Advertise MVE to gdb when present
tests/qtest/libqos: add SDHCI commands
hw/arm: Attach MMC to quanta-gbs-bmc
hw/arm: Add Nuvoton SD module to board
hw/sd: add nuvoton MMC
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
virtio-iommu support for x86/ACPI.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmGAefYPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpiCUH/2pIs3FmOGIasEqn4BnqXr4dHMReUO5Ghg0v
cXle4ZUrbg7Qpnxh07CwMuUpJV3Qv+xtVK7hzbD13nnxrkTZuKzBRV1AthkA1Hly
zIKOxnEgV497LaXoaSOtqAx48fuznk5XOHju91usgu4mehJ0qe2gcwb4H8uWGkQi
hrsR7a9woP0M4H/jvb3+aQRCJKMscj8ReabM1ulOugNpPdNI/jIKtBvZBtTxAqtQ
CH9/DJLfVmzDRYdeBpnF06A+tXm4uU1Q5BmpmF9qaymk/PzthN54gdnDd6zH405Z
Tmjp9UA2xfEYDmKzuTCBdPmoUe6OI7mU9o0WbB5MGYx5RRRBETw=
=R7DD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: features, fixes
virtio-iommu support for x86/ACPI.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 01 Nov 2021 07:36:22 PM EDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
* remotes/mst/tags/for_upstream:
hw/i386: fix vmmouse registration
pci: Export pci_for_each_device_under_bus*()
pci: Define pci_bus_dev_fn/pci_bus_fn/pci_bus_ret_fn
hw/i386/pc: Allow instantiating a virtio-iommu device
hw/i386/pc: Move IOMMU singleton into PCMachineState
hw/i386/pc: Remove x86_iommu_get_type()
hw/acpi: Add VIOT table
vhost-vdpa: Set discarding of RAM broken when initializing the backend
qtest: fix 'expression is always false' build failure in qtest_has_accel()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since commit d8fb7d0969 ("vl: switch -M parsing to keyval"), machine
parameter definitions cannot use underscores, because keyval_dashify()
transforms them to dashes and the parser doesn't find the parameter.
This affects option default_bus_bypass_iommu which was introduced in the
same release:
$ qemu-system-aarch64 -M virt,default_bus_bypass_iommu=on
qemu-system-aarch64: Property 'virt-6.1-machine.default-bus-bypass-iommu' not found
Rename the parameter to "default-bus-bypass-iommu". Passing
"default_bus_bypass_iommu" is still valid since the underscore are
transformed automatically.
Fixes: 6d7a85483a ("hw/arm/virt: Add default_bus_bypass_iommu machine option")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211026093733.2144161-1-jean-philippe@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is obsolete since SeaBIOS 1.11.0 introduced native support for
sending messages to the serial console. The new support can be
activated using -machine graphics=off on x86 targets.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210909123219.862652-1-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Any extra draw call for the same blob resource representing guest scanout
before the previous drawing is not finished can break synchronous draw
sequence. To prevent this, drawing is now done only once for each draw
submission (when draw_submitted == true).
v2:
- removed mutex
- updated commit msg
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
Message-Id: <20210924225105.24930-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Allows edk2 detect virtio-mmio devices and pcie ecam.
See comment in hw/i386/microvm-dt.c for more details.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20211014193617.2475578-1-kraxel@redhat.com>
This is a counterpart to the HMP "info rdma" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info usb" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info numa" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a counterpart to the HMP "info roms" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This turns the pattern
if (err) {
hmp_handle_error(mon, err);
return;
}
into
if (hmp_handle_error(mon, err)) {
return;
}
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is currently a check in esp_select() to cancel any in-flight SCSI requests
to ensure that issuing multiple select commands without continuing through the
rest of the ESP state machine ignores all but the last SCSI request. This is
also enforced through the addition of assert()s in esp_transfer_data() and
scsi_read_data().
The get_cmd() function does not call esp_select() when TC == 0 which means it is
possible for a fuzzer to trigger these assert()s by sending a select command when
TC == 0 immediately after a valid SCSI CDB has been submitted.
Since esp_select() is only called from get_cmd(), hoist the check to cancel
in-flight SCSI requests from esp_select() into get_cmd() to ensure it is always
called when executing a select command to initiate a new SCSI request.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Closes: https://gitlab.com/qemu-project/qemu/-/issues/662
Closes: https://gitlab.com/qemu-project/qemu/-/issues/663
Message-Id: <20211101183516.8455-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the logic of vmmouse_update_handler function,
vmmouse should be registered as an event handler when
it's status is zero.
vmmouse_read_id resets the status but does not register
the handler.
This patch adds vmmouse registration and activation when
status is reset.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <163524204515.1914131.16465061981774791228.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of invoking select_watchdog_action from both HMP and command line,
go directly from HMP to QMP and use QemuOpts as the intermediary for the
command line.
This makes -watchdog-action explicitly a shortcut for "-action watchdog",
so that "-watchdog-action" and "-action watchdog" override each other
based on the position on the command line; previously, "-action watchdog"
always won.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit d8fb7d0969 ("vl: switch -M parsing to keyval"), machine
parameter definitions cannot use underscores, because keyval_dashify()
transforms them to dashes and the parser doesn't find the parameter.
This affects option default_bus_bypass_iommu which was introduced in the
same release:
$ qemu-system-x86_64 -M q35,default_bus_bypass_iommu=on
qemu-system-x86_64: Property 'pc-q35-6.1-machine.default-bus-bypass-iommu' not found
Rename the parameter to "default-bus-bypass-iommu". Passing
"default_bus_bypass_iommu" is still valid since the underscore are
transformed automatically.
Fixes: c9e96b04fc ("hw/i386: Add a default_bus_bypass_iommu pc machine option")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211025104737.1560274-1-jean-philippe@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As long as fw_cfg supports DMA, the new ROM can be used also on older
machine types because it has the same size as the existing one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This removes a parameter from x86_load_linux, and will avoid code
duplication between the linux and multiboot cases once multiboot
starts to support DMA.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As qemu guidelines:
Unless a pointer is used to modify the pointed-to storage, give it the
"const" attribute.
In the particular case of iova_tree_find it allows to enforce what is
requested by its comment, since the compiler would shout in case of
modifying or freeing the const-qualified returned pointer.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211013182713.888753-2-eperezma@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hi
this includes pending bits of migration patches.
- virtio-mem support by David Hildenbrand
- dirtyrate improvements by Hyman Huang
- fix rdma wrid by Li Zhijian
- dump-guest-memory fixes by Peter Xu
Pleas apply.
Thanks, Juan.
-----BEGIN PGP SIGNATURE-----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=8B3Y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration-20211031-pull-request' into staging
Migration Pull request
Hi
this includes pending bits of migration patches.
- virtio-mem support by David Hildenbrand
- dirtyrate improvements by Hyman Huang
- fix rdma wrid by Li Zhijian
- dump-guest-memory fixes by Peter Xu
Pleas apply.
Thanks, Juan.
# gpg: Signature made Mon 01 Nov 2021 06:03:44 PM EDT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
* remotes/juanquintela/tags/migration-20211031-pull-request:
migration/dirtyrate: implement dirty-bitmap dirtyrate calculation
memory: introduce total_dirty_pages to stat dirty pages
migration/ram: Handle RAMBlocks with a RamDiscardManager on background snapshots
migration/ram: Factor out populating pages readable in ram_block_populate_pages()
migration: Simplify alignment and alignment checks
migration/postcopy: Handle RAMBlocks with a RamDiscardManager on the destination
virtio-mem: Drop precopy notifier
migration/ram: Handle RAMBlocks with a RamDiscardManager on the migration source
virtio-mem: Implement replay_discarded RamDiscardManager callback
memory: Introduce replay_discarded callback for RamDiscardManager
dump-guest-memory: Block live migration
migration: Add migrate_add_blocker_internal()
migration: Make migration blocker work for snapshots too
migration/dirtyrate: implement dirty-ring dirtyrate calculation
migration/dirtyrate: move init step of calculation to main thread
migration/dirtyrate: adjust order of registering thread
migration/dirtyrate: introduce struct and adjust DirtyRateStat
memory: make global_dirty_tracking a bitmask
KVM: introduce dirty_pages and kvm_dirty_ring_enabled
migration/rdma: Fix out of order wrid
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This device is part of a superio/ISA bridge chip and IRQs from it are
routed to an ISA interrupt set by the Interrupt Line PCI config
register. Implement this in a vt82c686-uhci-pci specific irq handler
Using via_isa_set_irq().
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <8d7ed385e33a847d8ddc669163a68b5ca57f82ce.1635161629.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of using pci_set_irq, store the irq in the device state and
use it explicitly so variants having different interrupt handling can
use their own.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <b39066e03c8731f4197d50bc79b403f797599999.1635161629.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Because this device only works as part of VIA superio chips set user
creatable to false. Since the class init method is common for UHCI
variants introduce a flag in UHCIInfo for this.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <e6abf1f19ca72bbc2d8a5a6aa941edbf87a9845f.1635161629.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fix a comment for coding style so subsequent patch will not get
checkpatch error and simplify and shorten uhci_update_irq().
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <b68a57dfcf181e73272b4dc951f8cc6e76b0d182.1635161629.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The LBA28 capacity (at offsets 60/61 of identification) is supposed to
express the maximum size supported by LBA28 commands. If the device is
larger than this, we have to cap it to 2^28-1.
At least NetBSD happens to be using this value to determine whether to use
LBA28 or LBA48 for its commands, using LBA28 for sectors that don't need
LBA48. This commit thus fixes NetBSD access to disks larger than 128GiB.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-Id: <20210824104344.3878849-1-samuel.thibault@ens-lyon.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
According to the logic of vmmouse_update_handler function,
vmmouse should be registered as an event handler when
it's status is zero.
vmmouse_read_id resets the status but does not register
the handler.
This patch adds vmmouse registration and activation when
status is reset.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <163524204515.1914131.16465061981774791228.stgit@pasha-ThinkPad-X280>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
They're actually more commonly used than the helper without _under_bus, because
most callers do have the pci bus on hand. After exporting we can switch a lot
of the call sites to use these two helpers.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20211028043129.38871-3-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
They're used in quite a few places of pci.[ch] and also in the rest of the code
base. Define them so that it doesn't need to be defined all over the places.
The pci_bus_fn is similar to pci_bus_dev_fn that only takes a PCIBus* and an
opaque. The pci_bus_ret_fn is similar to pci_bus_fn but it allows to return a
void* pointer.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20211028043129.38871-2-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow instantiating a virtio-iommu device by adding an ACPI Virtual I/O
Translation table (VIOT), which describes the relation between the
virtio-iommu and the endpoints it manages.
Add a hotplug handler for virtio-iommu on x86 and set the necessary
reserved region property. On x86, the [0xfee00000, 0xfeefffff] DMA
region is reserved for MSIs. DMA transactions to this range either
trigger IRQ remapping in the IOMMU or bypasses IOMMU translation.
Although virtio-iommu does not support IRQ remapping it must be informed
of the reserved region so that it can forward DMA transactions targeting
this region.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211026182024.2642038-5-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We're about to support a third vIOMMU for x86, virtio-iommu which
doesn't inherit X86IOMMUState. Move the IOMMU singleton into
PCMachineState, so it can be shared between all three vIOMMUs.
The x86_iommu_get_default() helper is still needed by KVM and IOAPIC to
fetch the default IRQ-remapping IOMMU. Since virtio-iommu doesn't
support IRQ remapping, this interface doesn't need to change for the
moment. We could later replace X86IOMMUState with an "IRQ remapping
IOMMU" interface if necessary.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211026182024.2642038-4-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To generate the IOMMU ACPI table, acpi-build.c can use base QEMU types
instead of a special IommuType value.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211026182024.2642038-3-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a function that generates a Virtual I/O Translation table (VIOT),
describing the topology of paravirtual IOMMUs. The table is created if a
virtio-iommu device is present. It contains a virtio-iommu node and PCI
Range nodes for endpoints managed by the IOMMU. By default, a single
node describes all PCI devices. When passing the
"default_bus_bypass_iommu" machine option and "bypass_iommu" PXB option,
only buses that do not bypass the IOMMU are described by PCI Range
nodes.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211026182024.2642038-2-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similar to VFIO, vDPA will go ahead an map+pin all guest memory. Memory
that used to be discarded will get re-populated and if we
discard+re-access memory after mapping+pinning, the pages mapped into the
vDPA IOMMU will go out of sync with the actual pages mapped into the user
space page tables.
Set discarding of RAM broken such that:
- virtio-mem and vhost-vdpa run mutually exclusive
- virtio-balloon is inhibited and no memory discards will get issued
In the future, we might be able to support coordinated discarding of RAM
as used by virtio-mem and already supported by vfio via the
RamDiscardManager.
Acked-by: Jason Wang <jasowang@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Cindy Lu <lulu@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211027130324.59791-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Migration code now properly handles RAMBlocks which are indirectly managed
by a RamDiscardManager. No need for manual handling via the free page
optimization interface, let's get rid of it.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Implement it similar to the replay_populated callback.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
since dirty ring has been introduced, there are two methods
to track dirty pages of vm. it seems that "logging" has
a hint on the method, so rename the global_dirty_log to
global_dirty_tracking would make description more accurate.
dirty rate measurement may start or stop dirty tracking during
calculation. this conflict with migration because stop dirty
tracking make migration leave dirty pages out then that'll be
a problem.
make global_dirty_tracking a bitmask can let both migration and
dirty rate measurement work fine. introduce GLOBAL_DIRTY_MIGRATION
and GLOBAL_DIRTY_DIRTY_RATE to distinguish what current dirty
tracking aims for, migration or dirty rate.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <9c9388657cfa0301bd2c1cfa36e7cf6da4aeca19.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now that we check sysbus device types during device creation, we
can remove the check in the machine init done notifier.
This was the only thing done by this notifier, so we remove the
whole sysbus_notifier structure of the MachineState.
Note: This notifier was checking all /peripheral and /peripheral-anon
sysbus devices. Now we only check those added by -device cli option or
device_add qmp command when handling the command/option. So if there
are some devices added in one of these containers manually (eg in
machine C code), these will not be checked anymore.
This use case does not seem to appear apart from
hw/xen/xen-legacy-backend.c (it uses qdev_set_id() and in this case,
not for a sysbus device, so it's ok).
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211029142258.484907-4-damien.hedde@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Right now the allowance check for adding a sysbus device using
-device cli option (or device_add qmp command) is done well after
the device has been created. It is done during the machine init done
notifier: machine_init_notify() in hw/core/machine.c
This new function will allow us to do the check at the right time and
issue an error if it fails.
Also make device_is_dynamic_sysbus() use the new function.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211029142258.484907-2-damien.hedde@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We are going to introduce an unit test for the parser smp_parse()
in hw/core/machine.c, but now machine.c is only built in softmmu.
In order to solve the build dependency on the smp parsing code and
avoid building unrelated stuff for the unit tests, move the tested
code from machine.c into a separate file, i.e., machine-smp.c and
build it in common field.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211026034659.22040-2-wangyanan55@huawei.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Restrict hotplug to system emulation, add stubs for the other uses.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211028150521.1973821-5-philmd@redhat.com>
As we want to be able to conditionally add files to the hw/core
file list, use a source set.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211028150521.1973821-3-philmd@redhat.com>
All these files don't make sense for tools and user emulation,
restrict them to system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20211028150521.1973821-2-philmd@redhat.com>
Only softmmu code uses gpio, so move gpio code from qdev.c to
gpio.c and compile it only on softmmu mode.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190425200051.19906-2-ehabkost@redhat.com>
[PMD: Rebased]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The MSI-X structures of some devices and other non-MSI-X structures
may be in the same BAR. They may share one host page, especially in
the case of large page granularity, such as 64K.
For example, MSIX-Table size of 82599 NIC is 0x30 and the offset in
Bar 3(size 64KB) is 0x0. vfio_listener_region_add() will be called
to map the remaining range (0x30-0xffff). If host page size is 64KB,
it will return early at 'int128_ge((int128_make64(iova), llend))'
without any message. Let's add a trace point to inform users like commit
5c08600547 ("vfio: Use a trace point when a RAM section cannot be DMA mapped")
did.
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Link: https://lore.kernel.org/r/20211027090406.761-3-jiangkunkun@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We can expand MemoryRegions of sub-page MMIO BARs in
vfio_pci_write_config() to improve IO performance for some
devices. However, the MemoryRegions of destination VM are
not expanded any more after live migration. Because their
addresses have been updated in vmstate_load_state()
(vfio_pci_load_config) and vfio_sub_page_bar_update_mapping()
will not be called.
This may result in poor performance after live migration.
So iterate BARs in vfio_pci_load_config() and try to update
sub-page BARs.
Reported-by: Nianyao Tang <tangnianyao@huawei.com>
Reported-by: Qixin Gan <ganqixin@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
Link: https://lore.kernel.org/r/20211027090406.761-2-jiangkunkun@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Artist is another device, this one is the Lasi PS/2.
Rename the functions accordingly.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20210920064048.2729397-2-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The expected output string from cpu_slot_to_string() ought to be
like "socket-id: *, die-id: *, core-id: *, thread-id: *", so add
the missing ", " before "die-id". This affects the readability
of the error message.
Fixes: 176d2cda0d ("i386/cpu: Consolidate die-id validity in smp context")
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211008075040.18028-1-wangyanan55@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The hw_error function calls abort and is not meant to be used by
devices. Use qemu_log_mask instead to log and ignore invalid accesses.
Also fix format strings to allow dropping type casts of hwaddr and use
__func__ instead of hard coding function name in the message which
were wrong in two cases.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <f818dc3dd2ac8c3b3d53067f316a716d7f9683d8.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The timer unit only has registers that fit in a region 0x30 bytes
long. No need to have the timer region larger than that.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <b1cd196cf1395a602c7a08a4f858e69e50c446a1.1635550060.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
It's more readable to keep things on one line if it fits the length limit.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <97bc2a38991f33fd0c8cc2e4d0a3a29b20c47d1f.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
According to coding style types should be camel case, also remove
unneded casts from void *.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <d9a9d160c1153a583397e366ab06477f5a31c507.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The sh_intc_locate function will either init these or not return so no
need to initialise them.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <15e04aa665c68ab5df47bbf505346d413be2fc1c.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use g_new0 instead of g_malloc0 and avoid some unneeded temporary
variable assignments.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <72efc4f2c4ff8b96848d03dca08e4541ee4076f6.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of if !expr continue else do something it is more straight
forward to say if expr then do something, especially if the action is
just a few lines. Remove such uses of continue to make the code easier
to follow.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <0efaa5e7a1a3ee11f82b3bb1942c287576c67f8b.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
All the places that call abort should not happen which is better
marked by g_assert_not_reached.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <039e6a784532f2af27f8adeafdb8e0391722f567.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This function is very simple and provides no advantage. Call sites
become simpler without it so just write it in line and drop the
separate function.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <a98d1f7f94e91a42796b7d91e9153a7eaa3d1c44.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Address of element i is one word thus clearer than array + i.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <f49c9b1dee1fcaf374b092d862a6821907d5fcdc.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Drop unneded parenthesis and split up one complex expression to write
it with less brackets so it's easier to follow.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <a48e849e5b803a952ed15a2502cfece2bde68934.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The sh_intc_register() function is only used at one place. Move them
together so it's easier to see what's going on.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <49f2742bc67cba7164385fafad204ab1e1bd3a0b.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The INT_REG_PARAMS macro was only used a few times within one function
on adjacent lines and is actually more complex than writing out the
parameters so simplify it by expanding the macro at call sites and
dropping the #define.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <d3bdfdc5ab5ae1c51a6c6c38bde3829a99f85ce5.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Rename the iomem region to "intc" from "interrupt-controller" which
makes the info mtree output less wide as it is already too wide
because of all the aliases. Also drop the format macro which was only
used twice in close proximity so we can just use the literal string
instead without a macro definition.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <cb6402dab6b44c804142b5cf9af68e6398cb613f.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Turn the INTC_MODE defines into an enum and clean up the function
returning these to make it clearer by removing nested ifs and
superfluous parenthesis. The one remaining #define is a flag which is
moved further apart by changing its value from 8 to 0x80 to leave some
spare bits as this is or-ed with the enum value at some places.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <4adf4e1ac9d2e728e5a536c69e310d77f0c4455a.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The INTC_A7 local macro does the same as the A7ADDR from
include/sh/sh.h so use the latter and drop the local macro definition.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <53f033477c73b7c9b021d36033c590416d6199c7.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Normally there are at least two sh_serial instances. Add device id to
trace messages to make it clear which instance they belong to
otherwise its not possible to tell which serial device is accessed.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <cc1f9ff9f4259ae799750e452f8871849c7a104c.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <92902ba34fdf2c8c62232365fbb6531b1036d557.1635541329.git.balaton@eik.bme.hu>
[PMD: Use g_strdup() to initialize DeviceState::id]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of allocating timer with timer_new store it directly in the
state struct. This makes it simpler to free it together with the device.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <fd01eb3720ec32dab06e03019f72f3e177033679.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Replace fprintf with qemu_log_mask LOG_GUEST_ERROR as the intention is
to handle valid accesses in these functions so if we get to these
errors then it's an invalid access. Do not abort as that would allow
the guest to crash QEMU and the practice in other devices is to not do
that just log and ignore the invalid access. While at it also simplify
the complex bit ops to check if a return value was set which can be
done much simpler and clearer.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <6b46045141d6d9cc32e17c223896fa1116384796.1635541329.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Fixup the PLIC context address to correctly support the threshold and
claim register.
Fixes: ef63100648 ("hw/riscv: opentitan: Update to the latest build")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211025040657.262696-1-alistair.francis@opensource.wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211022060133.3045020-5-alistair.francis@opensource.wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211022060133.3045020-4-alistair.francis@opensource.wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211022060133.3045020-3-alistair.francis@opensource.wdc.com
Add a generic function that can create the PLIC strings.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20211022060133.3045020-2-alistair.francis@opensource.wdc.com
Using a macro for the PLIC configuration doesn't make the code any
easier to read. Instead it makes it harder to figure out what is going
on, so let's remove it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20211022060133.3045020-1-alistair.francis@opensource.wdc.com
Use QEMU_ALIGN_DOWN() macro to reduce code and to make it
more human readable.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <b84eb324d2ebdcc6f9c442c97b5b4d01eecb4f43.1632758315.git.qemu_oss@crudebyte.com>
When client sent a 9p Tgetattr request then the wrong I/O block
size value was returned by 9p server; instead of host file
system's I/O block size it should rather return an I/O block
size according to 9p session's 'msize' value, because the value
returned to client should be an "optimum" block size for I/O
(i.e. to maximize performance), it should not reflect the actual
physical block size of the underlying storage media.
The I/O block size of a host filesystem is typically 4k, so the
value returned was far too low for good 9p I/O performance.
This patch adds stat_to_iounit() with a similar approach as the
existing get_iounit() function.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1mT2Js-0000DW-OH@lizzy.crudebyte.com>
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211015203532.2463705-4-tong.ho@xilinx.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211015203532.2463705-3-tong.ho@xilinx.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Tong Ho <tong.ho@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211015203532.2463705-2-tong.ho@xilinx.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- Vector extension bug fixes
- Bit manipulation extension bug fix
- Support vhost-user and numa mem options on all boards
- Rationalise XLEN and operand lengths
- Bump the OpenTitan FPGA support
- Remove the Ibex PLIC
- General code cleanup
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmFyvkoACgkQIeENKd+X
cFRvOQgAmSgFMu7BbiuLJ7W/0kK/a8vM53+HAMFyFvYiTS7ae2NRmxKyeR/OhFLf
qm36G/SbBhymWAvJysACa7mjvn104WnXkMdhLYGimkne/65IbnQOImzpXk81WP/n
45p/y0DdCs5pP2JNf9aIVxMMzgH2Lo4IgKxLFz+qpnphxtZGjdpocrCz837BOZQH
p61hadfi3rTc06w0Auq8A4Zr+Rp/gpoGzXmB0ujfRGfqi+brg40TV4EAX33e3BJi
249922MbFy2KqqO8H8So9rTZiK4gb/KJ0vGp61nwPcGsf1JPWXpeeb2g6L1syXHW
8J9VezmnIs8bs2SXDvkf0aZpEvDrIA==
=AKR1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair23/tags/pull-riscv-to-apply-20211022-2' into staging
Fourth RISC-V PR for QEMU 6.2
- Vector extension bug fixes
- Bit manipulation extension bug fix
- Support vhost-user and numa mem options on all boards
- Rationalise XLEN and operand lengths
- Bump the OpenTitan FPGA support
- Remove the Ibex PLIC
- General code cleanup
# gpg: Signature made Fri 22 Oct 2021 06:36:10 AM PDT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
* remotes/alistair23/tags/pull-riscv-to-apply-20211022-2: (33 commits)
hw/riscv: spike: Use MachineState::ram and MachineClass::default_ram_id
hw/riscv: sifive_u: Use MachineState::ram and MachineClass::default_ram_id
hw/riscv: sifive_e: Use MachineState::ram and MachineClass::default_ram_id
hw/riscv: shakti_c: Use MachineState::ram and MachineClass::default_ram_id
hw/riscv: opentitan: Use MachineState::ram and MachineClass::default_ram_id
hw/riscv: microchip_pfsoc: Use MachineState::ram and MachineClass::default_ram_id
hw/intc: sifive_plic: Cleanup the irq_request function
hw/intc: sifive_plic: Cleanup the realize function
hw/intc: sifive_plic: Move the properties
hw/intc: Remove the Ibex PLIC
hw/riscv: opentitan: Update to the latest build
target/riscv: Compute mstatus.sd on demand
target/riscv: Use riscv_csrrw_debug for cpu_dump
target/riscv: Use gen_shift*_per_ol for RVB, RVI
target/riscv: Use gen_unary_per_ol for RVB
target/riscv: Adjust trans_rev8_32 for riscv64
target/riscv: Use gen_arith_per_ol for RVM
target/riscv: Replace DisasContext.w with DisasContext.ol
target/riscv: Replace is_32bit with get_xl/get_xlen
target/riscv: Properly check SEW in amo_op
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* New fp5280g2-bmc board (John)
* Small cleanup in Aspeed SMC model (Cedric)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmFybmYACgkQUaNDx8/7
7KEqzRAAigdJJDS+F7uVYN9srdu8GtbXKRaGYgBcaPIGMzC42Ot9hE46UMUPPbf/
72QXynB09IvtkFgkX7xCaR3Lu1II7Ag+vf/VrjPltX1F05tdj9hTjPflJnPxWbBo
2nTU1vlUPXseaD5HQV/0ygYzqvbqyjCIhjSn0RKoMgKwrimBo52UByemOzh1unbV
nS4eCtQZlUj8ZPiwKViXk1XHscVyQY/7NhTTgdAUzkU74eIlf+op/mMRl3RWMOma
TsarphUoAfzCiYYZwg7IkWZWhTZt/zNR8OslNRfMbRFDfzFicCK3iu9L45jLaUix
W+N8z0xt1QxjWjzAAqHWVaNQion9zZS1Y219pI7rS76FI7m5CNDQ394lD3Pz3fqk
iW1JOtJACL9majRnZ58P7ScdVk68R/2Kt9VVcR93mkL4uAdrdxiWFScMssI1GmwR
CQ6m/Ktupw2YPqx87qNprsjpJriEx7ooU5SGdKpX7eLf2v5pcQRXLArfHOmL6mCe
xK0GGGTyz8E+GqzV8KciZpz9sEz0FoxPyqTjqboArvRPNCGnBvSSBISi24KXPXj3
MnOXiqLQ9BCAQRsSUMvWtof/X6DeAH7eQ8Pfk3+GxmnSsSInT6pOfbDESajMy7SY
ADji7W87JzIPqXO46JCgKU5yXmxaNfUKrJHm5nH0nlmQDUVT21E=
=qbBN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/clg/tags/pull-aspeed-20211022' into staging
Aspeed patches :
* New fp5280g2-bmc board (John)
* Small cleanup in Aspeed SMC model (Cedric)
# gpg: Signature made Fri 22 Oct 2021 12:55:18 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/clg/tags/pull-aspeed-20211022:
speed/sdhci: Add trace events
aspeed/smc: Use a container for the flash mmio address space
aspeed: Add support for the fp5280g2-bmc board
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using memory_region_init_ram(), which can't possibly handle vhost-user,
and can't work as expected with '-numa node,memdev' options.
Use MachineState::ram instead of manually initializing RAM memory
region, as well as by providing MachineClass::default_ram_id to
opt in to memdev scheme.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211020014112.7336-7-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using memory_region_init_ram(), which can't possibly handle vhost-user,
and can't work as expected with '-numa node,memdev' options.
Use MachineState::ram instead of manually initializing RAM memory
region, as well as by providing MachineClass::default_ram_id to
opt in to memdev scheme.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211020014112.7336-6-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using memory_region_init_ram(), which can't possibly handle vhost-user,
and can't work as expected with '-numa node,memdev' options.
Use MachineState::ram instead of manually initializing RAM memory
region, as well as by providing MachineClass::default_ram_id to
opt in to memdev scheme.
While at it add check for user supplied RAM size and error out if it
mismatches board expected value.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20211020014112.7336-5-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using memory_region_init_ram(), which can't possibly handle vhost-user,
and can't work as expected with '-numa node,memdev' options.
Use MachineState::ram instead of manually initializing RAM memory
region, as well as by providing MachineClass::default_ram_id to
opt in to memdev scheme.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211020014112.7336-4-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using memory_region_init_ram(), which can't possibly handle vhost-user,
and can't work as expected with '-numa node,memdev' options.
Use MachineState::ram instead of manually initializing RAM memory
region, as well as by providing MachineClass::default_ram_id to
opt in to memdev scheme.
While at it add check for user supplied RAM size and error out if it
mismatches board expected value.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20211020014112.7336-3-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Using memory_region_init_ram(), which can't possibly handle vhost-user,
and can't work as expected with '-numa node,memdev' options.
Use MachineState::ram instead of manually initializing RAM memory
region, as well as by providing MachineClass::default_ram_id to
opt in to memdev scheme.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20211020014112.7336-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20211018132609.160008-6-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Because AddressSpaces must not be sysbus-mapped, commit e9c568dbc2
("hw/arm/aspeed: Do not sysbus-map mmio flash region directly, use
alias") introduced an alias for the flash mmio region.
Using a container is cleaner.
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com>
Message-Id: <20211018132609.160008-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The fp5280g2-bmc is supported by OpenBMC, It's
based on the following device tree
https://github.com/openbmc/linux/blob/dev-5.10/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
Signed-off-by: John Wang <wangzhiqiang02@inspur.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211014064548.934799-1-wangzhiqiang02@inspur.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Shortly, the set of supported XL will not be just 32 and 64,
and representing that properly using the enumeration will be
imperative.
Two places, booting and gdb, intentionally use misa_mxl_max
to emphasize the use of the reset value of misa.mxl, and not
the current cpu state.
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211020031709.359469-5-richard.henderson@linaro.org
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If default main_mem is used to be registered as the system memory,
other memory cannot be initialized. Therefore, the system memory
should be initialized to the machine->ram, which consists of the
default main_mem and other possible memory required by applications,
such as shared hugepage memory in DPDK.
Also, the mc->defaul_ram_id should be set to the default main_mem,
such as "riscv_virt_board.ram" for the virt machine.
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211016030908.40480-1-limingwang@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Generate DBG2 table
Switch to ssize_t for elf loader return type
Fixed sbsa cpu type error message typo
Only initialize required submodules for edk2
Dont create device-tree node for empty NUMA node
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmFxhbgdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/Z6gf/Wt/iI+cwM8+eNYgV
fFrvkN2YUBS4B7QBVs7axbUmHs+/B8PIyBjo9WLmkMTdgnj13JiXmvE879PZwryr
zlh/2KqKBq+87L5CMOfPXtePizlZI/TuxJL0koIMW/L85ABEYOMyaDp0bDqhJHHb
UNBxvlxHgBmZUpBkmJKWoOKxQ9Jz8M5jpoUjKFCxhMHqbzAQOjS0B0IR6E4n8R4o
pKiWStc2TB7aGtVRY/Jm4EaSy9n3g77K40Yxkn6txN8Eqm/QxCLq9uwEZM2YMR5h
IJUxdUVNT31mCd2EhSAlHqpCrKuFaGCb+t8fQxLkd73AT5Unm5jJl5alfsO8khgV
TgipUA==
=boXv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-arm-20211021' into staging
Introduce cpu topology support
Generate DBG2 table
Switch to ssize_t for elf loader return type
Fixed sbsa cpu type error message typo
Only initialize required submodules for edk2
Dont create device-tree node for empty NUMA node
# gpg: Signature made Thu 21 Oct 2021 08:22:32 AM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* remotes/rth/tags/pull-arm-20211021:
tests/data/acpi/virt: Update the empty expected file for PPTT
hw/arm/virt-acpi-build: Generate PPTT table
tests/data/acpi/virt: Add an empty expected file for PPTT
hw/acpi/aml-build: Add PPTT table
hw/acpi/aml-build: Add Processor hierarchy node structure
hw/arm/virt: Add cpu-map to device tree
device_tree: Add qemu_fdt_add_path
hw/arm/virt: Only describe cpu topology since virt-6.2
bios-tables-test: Generate reference table for virt/DBG2
hw/arm/virt_acpi_build: Generate DBG2 table
tests/acpi: Add void table for virt/DBG2 bios-tables-test
hw/elf_ops.h: switch to ssize_t for elf loader return type
hw/arm/sbsa-ref: Fixed cpu type error message typo.
roms/edk2: Only initialize required submodules
roms/edk2: Only init brotli submodule to build BaseTools
hw/arm/virt: Don't create device-tree node for empty NUMA node
tests/acpi: Generate reference blob for IORT rev E.b
hw/arm/virt-acpi-build: IORT upgrade up to revision E.b
tests/acpi: Get prepared for IORT E.b revision upgrade
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Generate the Processor Properties Topology Table (PPTT) for ARM
virt machines supporting it (>= 6.2).
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20211020142125.7516-8-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add the Processor Properties Topology Table (PPTT) used to
describe CPU topology information to ACPI guests.
Note, a DT-boot Linux guest with a non-flat CPU topology will
see socket and core IDs being sequential integers starting
from zero, which is different from ACPI-boot Linux guest,
e.g. with -smp 4,sockets=2,cores=2,threads=1
a DT boot produces:
cpu: 0 package_id: 0 core_id: 0
cpu: 1 package_id: 0 core_id: 1
cpu: 2 package_id: 1 core_id: 0
cpu: 3 package_id: 1 core_id: 1
an ACPI boot produces:
cpu: 0 package_id: 36 core_id: 0
cpu: 1 package_id: 36 core_id: 1
cpu: 2 package_id: 96 core_id: 2
cpu: 3 package_id: 96 core_id: 3
This is due to several reasons:
1) DT cpu nodes do not have an equivalent field to what the PPTT
ACPI Processor ID must be, i.e. something equal to the MADT CPU
UID or equal to the UID of an ACPI processor container. In both
ACPI cases those are platform dependant IDs assigned by the
vendor.
2) While QEMU is the vendor for a guest, if the topology specifies
SMT (> 1 thread), then, with ACPI, it is impossible to assign a
core-id the same value as a package-id, thus it is not possible
to have package-id=0 and core-id=0. This is because package and
core containers must be in the same ACPI namespace and therefore
must have unique UIDs.
3) ACPI processor containers are not mandatorily required for PPTT
tables to be used and, due to the limitations of which IDs are
selected described above in (2), they are not helpful for QEMU,
so we don't build them with this patch. In the absence of them,
Linux assigns its own unique IDs. The maintainers have chosen not
to use counters from zero, but rather ACPI table offsets, which
explains why the numbers are so much larger than with DT.
4) When there is no SMT (threads=1) the core IDs for ACPI boot guests
match the logical CPU IDs, because these IDs must be equal to the
MADT CPU UID (as no processor containers are present), and QEMU
uses the logical CPU ID for these MADT IDs.
So in summary, with QEMU as the vendor for the guests, we simply
use sequential integers starting from zero for the non-leaf nodes
but with ID-valid flag unset, so that guest will ignore them and
use table offsets as unique container IDs. And we use logical CPU
IDs for the leaf nodes with the ID-valid flag set, which will be
consistent with MADT.
Currently the implementation of PPTT generation complies with ACPI
specification 5.2.29 (Revision 6.3). The 6.3 spec can be found at:
https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Co-developed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20211020142125.7516-6-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a generic API to build Processor hierarchy node structure (Type 0),
which is strictly consistent with descriptions in ACPI 6.3: 5.2.29.1.
This function will be used to build ACPI PPTT table for cpu topology.
Co-developed-by: Ying Fang <fangying1@huawei.com>
Co-developed-by: Henglong Fan <fanhenglong@huawei.com>
Co-developed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20211020142125.7516-5-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Support device tree CPU topology descriptions.
In accordance with the Devicetree Specification, the Linux Doc
"arm/cpus.yaml" requires that cpus and cpu nodes in the DT are
present. And we have already met the requirement by generating
/cpus/cpu@* nodes for members within ms->smp.cpus. Accordingly,
we should also create subnodes in cpu-map for the present cpus,
each of which relates to an unique cpu node.
The Linux Doc "cpu/cpu-topology.txt" states that the hierarchy
of CPUs in a SMP system is defined through four entities and
they are socket/cluster/core/thread. It is also required that
a socket node's child nodes must be one or more cluster nodes.
Given that currently we are only provided with information of
socket/core/thread, we assume there is one cluster child node
in each socket node when creating cpu-map.
Co-developed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211020142125.7516-4-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On existing older machine types, without cpu topology described
in ACPI or DT, the guest will populate one by default. With the
topology described, it will read the information and set up its
topology as instructed, but that may not be the same as what was
getting used by default. It's possible that an user application
has a dependency on the default topology and if the default one
gets changed it will probably behave differently.
Based on above consideration we'd better only describe topology
information to the guest on 6.2 and later machine types.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20211020142125.7516-2-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ARM SBBR specification mandates DBG2 table (Debug Port Table 2)
since v1.0 (ARM DEN0044F 8.3.1.7 DBG2).
The DBG2 table allows to describe one or more debug ports.
Generate an DBG2 table featuring a single debug port, the PL011.
The DBG2 specification can be found at
"Microsoft Debug Port Table 2 (DBG2)"
https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-debug-port-table?redirectedfrom=MSDN
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20211019080037.930641-3-eric.auger@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Recent Linux kernels are accessing the PCI device in slot 0 that
represents the PCI host bridge. This causes ppc4xx_pci_map_irq()
to return -1 which causes an assert() later:
hw/pci/pci.c:262: pci_bus_change_irq_level: Assertion `irq_num >= 0' failed.
Thus we should allocate an IRQ line for the device in slot 0, too.
To avoid changes to the outside of ppc4xx_pci.c, we map it to
the internal IRQ number 4 which will then happily be ignored since
ppc440_bamboo.c does not wire it up.
With these changes it is now possible again to use recent Linux
kernels for the bamboo board.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211019091817.469003-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This only helps Linux guests as only that seems to use it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <1c1e030f2bbc86e950b3310fb5922facdc21ef86.1634241019.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Define a constant for PCI config addresses to make it clearer what
these numbers are.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <9bd8e84d02d91693b71082a1fadeb86e6bce3025.1634241019.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of relying on the mapped address of the MV64361 registers
access them via their memory region. This is not a problem at reset
time when these registers are mapped at the default address but the
guest could change this later and then the RTAS calls accessing PCI
config registers could fail. None of the guests actually do this so
this only avoids a theoretical problem not seen in practice.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <b6f768023603dc2c4d130720bcecdbea459b7668.1634241019.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is needed for Linux to access RTC time.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <6233eb07c680d6c74427e11b9641958f98d53378.1634241019.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Issue a warning when using VOF (which is the default) but no -kernel
option given to let users know that it will likely fail as the guest
has nothing to run. It is not a hard error because it may still be
useful to start the machine without further options for testing or
inspecting it from monitor without actually booting it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <a4ec9a900df772b91e9f69ca7a0799d8ae293e5a.1634241019.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The CHRP spec this board confirms to only allows 2 GiB of system
memory below 4 GiB as the high 2 GiB is allocated to IO and system
resources. To avoid problems with memory overlapping these areas
restrict RAM to 2 GiB similar to mac_newworld.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <54f58229a69c9c1cca21bcecad700b3d7052edd5.1634241019.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When using u-boot as firmware with the taihu board, QEMU aborts with
this assertion:
ERROR:../accel/tcg/tcg-accel-ops.c:79:tcg_handle_interrupt: assertion failed:
(qemu_mutex_iothread_locked())
Running QEMU with "-d in_asm" shows that the crash happens when writing
to SPR 0x3f2, so we are missing to lock the iothread in the code path
here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211006071140.565952-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xive_esb_rw() is the common routine used for memory accesses on ESB
page. Use it for triggers also.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211006210546.641102-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 962104f044 ("hw/ppc: moved hcalls that depend on softmmu")
introduced a lot of unnecessary #include directives. Remove them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211006170801.178023-1-philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 4d9b8ef9b5 ("target/ppc: Fix 64-bit decrementer") introduced
new int64t variables and broke the test triggering the decrementer
exception. Revert partially the change to evaluate both clause of the
if statement.
Reported-by: Coverity CID 1464061
Fixes: 4d9b8ef9b5 ("target/ppc: Fix 64-bit decrementer")
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211005053324.441132-1-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
and use them to set and test the ASSERTED bit of LSI sources.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211004212141.432954-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
