Modify save_live_pending to return separate postcopiable and
non-postcopiable counts.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
MIG_CMD_PACKAGED is a migration command that wraps a chunk of migration
stream inside a package whose length can be determined purely by reading
its header. The destination guarantees that the whole MIG_CMD_PACKAGED
is read off the stream prior to parsing the contents.
This is used by postcopy to load device state (from the package)
while leaving the main stream free to receive memory pages.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The state of the postcopy process is managed via a series of messages;
* Add wrappers and handlers for sending/receiving these messages
* Add state variable that track the current state of postcopy
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The 'postcopy ram' capability allows postcopy migration of RAM;
note that the migration starts off in precopy mode until
postcopy mode is triggered (see the migrate_start_postcopy
patch later in the series).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy needs to have two migration streams loading concurrently;
one from memory (with the device state) and the other from the fd
with the memory transactions.
Split the core of qemu_loadvm_state out so we can use it for both.
Allow the inner loadvm loop to quit and cause the parent loops to
exit as well.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Open a return path, and handle messages that are received upon it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add 'migration_is_setup_or_active' utility function to check state.
(It gets postcopy added to it's list later on in the series)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add migrate_send_rp_message to send a message from destination to source along the return path.
(It uses a mutex to let it be called from multiple threads)
Add migrate_send_rp_shut to send a 'shut' message to indicate
the destination is finished with the RP.
Add migrate_send_rp_ack to send a 'PONG' message in response to a PING
Use it in the MSG_RP_PING handler
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add two src->dest commands:
* OPEN_RETURN_PATH - To request that the destination open the return path
* PING - Request an acknowledge from the destination
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Create QEMU_VM_COMMAND section type for sending commands from
source to destination. These commands are not intended to convey
guest state but to control the migration process.
For use in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The destination sets the fd to non-blocking on incoming migrations;
this also affects the return path from the destination, and thus we
need to make sure we can safely write to the return path.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy needs a method to send messages from the destination back to
the source, this is the 'return path'.
Wire it up for 'socket' QEMUFile's.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In postcopy we're going to need to perform the complete phase
for postcopiable devices at a different point, start out by
renaming all of the 'complete's to make the difference obvious.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Suspend to file is very much like a migrate, and it makes life
easier if we have the Migration state available, so initialise it
in the savevm.c code for suspending.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewd-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The main RAM load loop has a call to host_from_stream_offset for
each page type that actually loads data with the same test;
factor it out before the switch.
The host = NULL is to silence a bogus gcc warning of
an unitialised in the RAM_SAVE_COMPRESS_PAGE case, it
doesn't seem to realise that host is always initialised by the if at
the top in the cases the switch takes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Useful for debugging the migration bitmap and other bitmaps
of the same format (including the sentmap in postcopy).
The bitmap is printed to stderr.
Lines that are all the expected value are excluded so the output
can be quite compact for many bitmaps.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a wrapper to change the blocking status on a QEMUFile
rather than having to use qemu_set_block(qemu_get_fd(f));
it seems best to avoid exposing the fd since not all QEMUFile's
really have one. With this wrapper we could move the implementation
down to be different on different transports.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu_get_buffer always copies the data it reads to a users buffer,
however in many cases the file buffer inside qemu_file could be given
back to the caller, avoiding the copy. This isn't always possible
depending on the size and alignment of the data.
Thus 'qemu_get_buffer_in_place' either copies the data to a supplied
buffer or updates a pointer to the internal buffer if convenient.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
'file' becomes confusing when you have flows in each direction;
rename to make it clear.
This leaves just the main forward direction ms->file, which is used
in a lot of places and is probably not worth renaming given the churn.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a function to find a RAMBlock by name; use it in two
of the places that already open code that loop; we've
got another use later in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The vmstate_configuration is currently written
in 'qemu_savevm_state_begin', move it to
'qemu_savevm_state_header' since it's got a hard
requirement that it must be the 1st thing after
the header.
(In postcopy some 'command' sections get sent
early before the saving of the main sections
and hence before qemu_savevm_state_begin).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Just clean up code, no behavior change.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
'cleanup' seems more appropriate than 'cancel'.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
The function qemu_savevm_state_cancel is called after the migration
in migration_thread, it seems strange to 'cancel' it after completion,
rename it to qemu_savevm_state_cleanup looks better.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
Because of the patch 3ea3b7fa9af067982f34b of kvm, which introduces a
lazy collapsing of small sptes into large sptes mechanism, now
migration_end() is a time consuming operation because it calls
memroy_global_dirty_log_stop(), which will trigger the dropping of small
sptes operation and takes about dozens of milliseconds, so call
migration_end() before all the vmsate data has already been transferred
to the destination will prolong VM downtime. This operation should be
deferred after all the data has been transferred to the destination.
blk_mig_cleanup() can be deferred too.
For a VM with 8G RAM, this patch can reduce the VM downtime about 30 ms.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
blk_bs() will not necessarily return a non-NULL value any more (unless
blk_is_available() is true or it can be assumed to otherwise, e.g.
because it is called immediately after a successful blk_new_with_bs() or
blk_new_open()).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The coroutine files are currently referenced by the block-obj-y
variable. The coroutine functionality though is already used by
more than just the block code. eg migration code uses coroutine
yield. In the future the I/O channel code will also use the
coroutine yield functionality. Since the coroutine code is nicely
self-contained it can be easily built as part of the libqemuutil.a
library, making it widely available.
The headers are also moved into include/qemu, instead of the
include/block directory, since they are now part of the util
codebase, and the impl was never in the block/ directory
either.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Release qemu global mutex before call synchronize_rcu().
synchronize_rcu() waiting for all readers to finish their critical
sections. There is at least one critical section in which we try
to get QGM (critical section is in address_space_rw() and
prepare_mmio_access() is trying to aquire QGM).
Both functions (migration_end() and migration_bitmap_extend())
are called from main thread which is holding QGM.
Thus there is a race condition that ends up with deadlock:
main thread working thread
Lock QGA |
| Call KVM_EXIT_IO handler
| |
| Open rcu reader's critical section
Migration cleanup bh |
| |
synchronize_rcu() is |
waiting for readers |
| prepare_mmio_access() is waiting for QGM
\ /
deadlock
The patch changes bitmap freeing from direct g_free after synchronize_rcu
to free inside call_rcu.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reported-by: Igor Redko <redkoi@virtuozzo.com>
Tested-by: Igor Redko <redkoi@virtuozzo.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
CC: Anna Melekhova <annam@virtuozzo.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Wen Congyang <wency@cn.fujitsu.com>
We were announcing the dest host's IP as our new IP a bit too soon -- if
there were errors detected after this announcement was done, the
migration is failed and the VM could continue running on the src host --
causing problems later.
Move around the qemu_announce_self() call so it's done just before the
VM is runnable.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The current migration-completed event is generated a bit too early,
which means that an eager libvirt that's ready to go as soon
as it sees the event ends up racing with the actual end of migration.
This corresponds to RH bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1271145
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
xSigned-off-by: Juan Quintela <quintela@redhat.com>
Migration has a define for MAX_THROTTLE. Update comment to clarify that this is
used for throttling transfer speed. Hopefully this will prevent it from being
confused with a guest cpu throttling entity.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Report throttle percentage in info migrate and query-migrate responses when
cpu throttling is active.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Remove traditional auto-converge static 30ms throttling code and replace it
with a dynamic throttling algorithm.
Additionally, be more aggressive when deciding when to start throttling.
Previously we waited until four unproductive memory passes. Now we begin
throttling after only two unproductive memory passes. Four seemed quite
arbitrary and only waiting for two passes allows us to complete the migration
faster.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Add migration parameters to allow the user to adjust the parameters
that control cpu throttling when auto-converge is in effect. The added
parameters are as follows:
x-cpu-throttle-initial : Initial percantage of time guest cpus are throttled
when migration auto-converge is activated.
x-cpu-throttle-increment: throttle percantage increase each time
auto-converge detects that migration is not making progress.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Split out the finding of the dirty page and all the wrap detection
into a separate function since it was getting a bit hairy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1443018431-11170-3-git-send-email-dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
[Fix comment -- Amit]
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Pull the search state for one iteration of the dirty page
search into a structure.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1443018431-11170-2-git-send-email-dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1442231491-23352-1-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This time convert the external functions:
qemu_get_buffer, qemu_peek_buffer
qemu_put_buffer and qemu_put_buffer_async
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1439463094-5394-6-git-send-email-dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This is a start on using size_t more in qemu-file and friends;
it fixes up QEMUFilePutBufferFunc and QEMUFileGetBufferFunc
to take size_t lengths and return ssize_t return values (like read(2))
and fixes up all the different implementations of them.
Note that I've not yet followed this deeply into bdrv_ implementations.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1439463094-5394-5-git-send-email-dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The code that gets run at the end of the migration process
is getting large, and I'm about to add more for postcopy.
Split it into a separate function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1439463094-5394-3-git-send-email-dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
RAM migration mainly works on RAMBlocks but in a few places
uses data from MemoryRegions to access the same information that's
already held in RAMBlocks; clean it up just to avoid the
MemoryRegion use.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1439463094-5394-2-git-send-email-dgilbert@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When doing migration via the QMP command xen_save_devices_state, the
current runstate is not store into the global state section. Also the
current runstate is not the one we want on the receiver side.
During migration, the Xen toolstack paused QEMU before save the devices
state. Also, the toolstack expect QEMU to autostart when the migration is
finished.
So this patch store "running" as it's current runstate.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The error checks I added used 'break' after the error, but I'm
in a switch inside the while loop, so they need to be 'goto out'.
Spotted by coverity; entries 1311368 and 1311369
Fixes: afcddefd
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1436555332-19076-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit df4b102452 introduced global_state
section. But it only filled the state while doing migration. While
doing a savevm, we stored an empty string as state. So when we did a
loadvm, it complained that state was invalid.
Fedora 21, 4.1.1, qemu 2.4.0-rc0
> ../../configure --target-list="x86_64-softmmu"
068 2s ... - output mismatch (see 068.out.bad)
--- /home/bos/jhuston/src/qemu/tests/qemu-iotests/068.out 2015-07-08
17:56:18.588164979 -0400
+++ 068.out.bad 2015-07-09 17:39:58.636651317 -0400
@@ -6,6 +6,8 @@
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm 0
(qemu) quit
+qemu-system-x86_64: Unknown savevm section or instance 'globalstate' 0
+qemu-system-x86_64: Error -22 while loading VM state
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
*** done
Failures: 068
Failed 1 of 1 tests
Actually, there were two problems here:
- we registered global_state too late for load_vm (fixed on another
patch on the list)
- we didn't store a valid state for savevm (fixed by this patch).
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
'strlen' is called three times in 'save_page_header', it's
inefficient.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We can want the trace event even without migration events enabled.
Reported-by: Wen Congyang <ghostwcy@gmail.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
On previous change, we changed state at post load time if it was not
running, special casing the "running" change. Now, we change any states
at the end of the migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
