* kwolf/for-anthony:
block: Don't forget to delete temporary file
Don't require encryption password for 'qemu-img info' command
qemu-img: Add json output option to the info command.
qapi: Add SnapshotInfo and ImageInfo.
ahci: properly reset PxCMD on HBA reset
block: fix block tray status
vdi: Fix warning from clang
block/curl: Fix wrong free statement
ide: Fix error messages from static code analysis (no real error)
ATAPI: STARTSTOPUNIT only eject/load media if powercondition is 0
sheepdog: fix savevm and loadvm
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
* 'spice.v59' of git://anongit.freedesktop.org/spice/qemu:
Remove #ifdef QXL_COMMAND_FLAG_COMPAT_16BPP
qxl: Add set_client_capabilities() interface to QXLInterface
spice: make number of surfaces runtime-configurable.
configure: print spice-protocol and spice-server versions
qxl: add QXL_IO_MONITORS_CONFIG_ASYNC
qxl: disallow unknown revisions
qxl/update_area_io: guest_bug on invalid parameters
spice: increase the verbosity of spice section in "qemu --help"
spice: adding seamless-migration option to the command line
spice: add 'migrated' flag to spice info
spice migration: add QEVENT_SPICE_MIGRATE_COMPLETED
spice: notify on vm state change only via spice_server_vm_start/stop
spice: notify spice server on vm start/stop
spice: abort on invalid streaming cmdline params
Convert 'sendkey' to use QAPI.
QAPI passes key's index of mapping table to qmp_send_key(),
not keycode. So we use help functions to convert key/code to
index of key_defs, and 'index' will be converted to 'keycode'
inside qmp_send_key().
For qmp, QAPI would check invalid key and raise error.
For hmp, invalid key is checked in hmp_send_key().
'send-key' of QMP doesn't support key in hexadecimal format.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
key_defs[] in monitor.c is a mapping table of keys and keycodes,
this patch added a QKeyCode enum. Key's index in the enmu is same
as keycode's index in key_defs[].
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The flag is 'true' when spice migration has completed on the src side.
It is needed for a case where libvirt dies before migration completes
and it misses the event QEVENT_SPICE_MIGRATE_COMPLETED.
When libvirt is restored and queries the migration status, it also needs
to query spice and check if its migration has completed.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a 'query-target' QAPI command to allow management applications
to determine what target architecture a QEMU binary is emulating
without having to parse the binary name or -help output
$ qmp-shell -p /tmp/qemu
(QEMU) query-target
{ u'return': { u'arch': u'x86_64' }}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support that enables passing of file descriptors
to the QEMU monitor where they will be stored in specified file
descriptor sets.
A file descriptor set can be used by a client like libvirt to
store file descriptors for the same file. This allows the
client to open a file with different access modes (O_RDWR,
O_WRONLY, O_RDONLY) and add/remove the passed fds to/from an fd
set as needed. This will allow QEMU to (in a later patch in this
series) "open" and "reopen" the same file by dup()ing the fd in
the fd set that corresponds to the file, where the fd has the
matching access mode flag that QEMU requests.
The new QMP commands are:
add-fd: Add a file descriptor to an fd set
remove-fd: Remove a file descriptor from an fd set
query-fdsets: Return information describing all fd sets
Note: These commands are not compatible with the existing getfd
and closefd QMP commands.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qmp/queue/qmp: (48 commits)
target-ppc: add implementation of query-cpu-definitions (v2)
target-i386: add implementation of query-cpu-definitions (v2)
qapi: add query-cpu-definitions command (v2)
compiler: add macro for GCC weak symbols
qapi: add query-machines command
qapi: mark QOM commands stable
qmp: introduce device-list-properties command
qmp: add SUSPEND_DISK event
qmp: qmp-events.txt: add missing doc for the SUSPEND event
qmp: qmp-events.txt: put events in alphabetical order
qmp: emit the WAKEUP event when the guest is put to run
qmp: don't emit the RESET event on wakeup from S3
scripts: qapi-commands.py: qmp-commands.h: include qdict.h
docs: writing-qmp-commands.txt: update error section
error, qerror: drop QDict member
qerror: drop qerror_table and qerror_format()
error, qerror: pass desc string to error calls
error: drop error_get_qobject()/error_set_qobject()
qemu-ga: switch to the new error format on the wire
qmp: switch to the new error format on the wire
...
This command attempts to map to the behavior of -cpu ?. Unfortunately, the
output of this command differs wildly across targets.
To accommodate this, we use a weak symbol to implement a default version of the
command that fails with a QERR_NOT_SUPPORTED error code. Targets can then
override and implement this command if it makes sense for them.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This provides the same output as -M ? but in a structured way.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We've had a cycle to tweak. It is time to commit to supporting them.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This can be used in conjunction with qom-list-types to determine the supported
set of devices and their parameters.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
IMPORTANT: this BREAKS QMP's compatibility for the error response.
This commit changes QMP's wire protocol to make use of the simpler
error format introduced by previous commits.
There are two important (and mostly incompatible) changes:
1. Almost all error classes have been replaced by GenericError. The
only classes that are still supported for compatibility with
libvirt are: CommandNotFound, DeviceNotActive, KVMMissingCap,
DeviceNotFound and MigrationExpected
2. The 'data' field of the error dictionary is gone
As an example, an error response like:
{ "error": { "class": "DeviceNotRemovable",
"data": { "device": "virtio0" },
"desc": "Device 'virtio0' is not removable" } }
Will now be emitted as:
{ "error": { "class": "GenericError",
"desc": "Device 'virtio0' is not removable" } }
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Change XBZRLE cache size in bytes (the size should be a power of 2, it will be
rounded down to the nearest power of 2).
If XBZRLE cache size is too small there will be many cache miss.
New query-migrate-cache-size QMP command and 'info migrate_cache_size' HMP
command to query cache value.
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: Petter Svard <petters@cs.umu.se>
Signed-off-by: Aidan Shribman <aidan.shribman@sap.com>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The management can enable/disable a capability for the next migration by using
migrate-set-capabilities QMP command.
The user can use migrate_set_capability HMP command.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The management can query the current migration capabilities using
query-migrate-capabilities QMP command.
The user can use 'info migrate_capabilities' HMP command.
Currently only XBZRLE capability is available.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Talk about background operations in general, rather than specifically
about streaming.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qmp/queue/qmp:
hmp: show the backing file depth
block: Use bdrv_get_backing_file_depth()
block: create bdrv_get_backing_file_depth()
qapi: qapi.py: allow the "'" character to be escaped
Use the dedicated counting function in qmp_query_block in order to
propagate the backing file depth to HMP and add backing_file_depth
to qmp-commands.hx
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The vlan feature can be implemented in terms of hubs. By introducing a
hub net client it becomes possible to remove the special case vlan code
from net.c and push the vlan feature out of generic networking code.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
NetdevTapOptions::sndbuf and NetdevDumpOptions::len use the new "size"
type.
v1->v2:
- NetLegacy::name is optional
- NetLegacyNicOptions::vectors is of type uint32
- NetdevVdeOptions::port and ::mode are of type uint16
- NetLegacy::vlan has type int32
v2->v3:
- NetLegacy::id is allowed and takes precedence over NetLegacy::name
- replace "@traits" with "@opts" in NetLegacy & Netdev descriptions
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
We add time spent for migration to the output of "info migrate"
command. 'total_time' means time since the start fo migration if
migration is 'active', and total time of migration if migration is
completed. As we are also interested in transferred ram when
migration completes, adding all ram statistics
Signed-off-by: Juan Quintela <quintela@redhat.com>
Sometimes it is neccessary for an application to determine
whether a particular QMP event is available, so they can
decide whether to use compatibility code instead. This
introduces a new 'query-events' command to QMP to do just
that
{ "execute": "query-events" }
{"return": [{"name": "WAKEUP"},
{"name": "SUSPEND"},
{"name": "DEVICE_TRAY_MOVED"},
{"name": "BLOCK_JOB_CANCELLED"},
{"name": "BLOCK_JOB_COMPLETED"},
...snip...
{"name": "SHUTDOWN"}]}
* monitor.c: Turn MonitorEvent -> string conversion
into a lookup from a static table of constant strings.
Add impl of qmp_query_events monitor command handler
* qapi-schema.json, qmp-commands.hx: Define contract of
query-events command
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is not a full QAPI conversion, but an intermediate step.
In essence, do_netdev_add() is split into three functions:
1. netdev_add(): performs the actual work. This function is fully
converted to Error (thus, it's "qapi-friendly")
2. qmp_netdev_add(): the QMP front-end for netdev_add(). This is
coded by hand and not auto-generated (gen=no in the schema). The
reason for this it's a lot easier and simpler to with QemuOpts
this way
3. hmp_netdev_add(): HMP front-end.
This design was suggested by Paolo Bonzini.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>
The command's usage:
dump-guest-memory [-p] protocol [begin] [length]
The supported protocol can be file or fd:
1. file: the protocol starts with "file:", and the following string is
the file's path.
2. fd: the protocol starts with "fd:", and the following string is the
fd's name.
Note:
1. If you want to use gdb to process the core, please specify -p option.
The reason why the -p option is not default is:
a. guest machine in a catastrophic state can have corrupted memory,
which we cannot trust.
b. The guest machine can be in read-mode even if paging is enabled.
For example: the guest machine uses ACPI to sleep, and ACPI sleep
state goes in real-mode.
2. If you don't want to dump all guest's memory, please specify the start
physical address and the length.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
QEMU enters in this state when the guest suspends to ram (S3).
This is important so that HMP users and QMP clients can know that
the guest is suspended. QMP also has an event for this, but events
are not reliable and are limited (ie. a client can connect to QEMU
after the event has been emitted).
Having a different state for S3 brings a new issue, though. Every
device that doesn't run when the VM is stopped but wants to run
when the VM is suspended has to check for RUN_STATE_SUSPENDED
explicitly. This is the case for the keyboard and mouse devices,
for example.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add mouse_mode, either server or mouse, to qmp and hmp commands, based
on spice_server_is_server_mouse added in spice-server 0.10.3.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Allow streaming operations to be started with an initial speed limit.
This eliminates the window of time between starting streaming and
issuing block-job-set-speed. Users should use the new optional 'speed'
parameter instead so that speed limits are in effect immediately when
the job starts.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
There are at least two different errors that can occur in
block_job_set_speed(): the job might not support setting speeds or the
value might be invalid.
Use the Error mechanism to report the error where it occurs.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The block streaming and job commands used '_' instead of '-' for reasons
of compatibility with libvirt, which already included support for the
'_' naming. However, the semantics of block_job_cancel have changed and
libvirt now needs to handle the new semantics.
Since the old semantics were never in a QEMU release we can still rename
the commands to use '-' instead of '_'. Libvirt is also happy because
the new name can be used to distinguish QEMU binaries that support the
latest block-job-cancel semantics from those that include a downstream
block_job_cancel command.
Therefore, let's apply the QAPI/QMP naming rules to the block streaming
and job commands. QEMU 1.1 will be the first release with these
commands so no upstream users can break.
Note that HMP commands are left with '_' because that is the convention
there.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* sstabellini/saverestore-8:
xen: do not allocate RAM during INMIGRATE runstate
xen mapcache: check if memory region has moved.
xen: record physmap changes to xenstore
Set runstate to INMIGRATE earlier
Introduce "xen-save-devices-state"
cirrus_vga: do not reset videoram
Conflicts:
qapi-schema.json
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- add an "is_ram" flag to SaveStateEntry;
- register_savevm_live sets is_ram for live_savevm devices;
- introduce a "xen-save-devices-state" QAPI command that can be used to save
the state of all devices, but not the RAM or the block devices of the
VM.
Changes in v8:
- rename save-devices-state to xen-save-devices-state.
Changes in v7:
- rename save_devices to save-devices-state.
Changes in v6:
- remove the is_ram parameter from register_savevm_live and sets is_ram
if the device is a live_savevm device;
- introduce save_devices as a QAPI command, write a better description
for it;
- fix CODING_STYLE;
- introduce a new doc to explain the save format used by save_devices.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
The migrate command is one of those commands where HMP and QMP completely
mix up together. This made the conversion to the QAPI (which separates the
command into QMP and HMP parts) a bit difficult.
The first important change to be noticed is that this commit completes the
removal of the Monitor object from migration code, started by the previous
commit.
Another important and tricky change is about supporting the non-detached
mode. That is, if the user doesn't pass '-d' the migrate command will lock
the monitor and will only release it when migration is finished.
To support this in the new HMP command (hmp_migrate()), it is necessary
to create a timer which runs every second and checks if the migration is
still active. If it is, the timer callback will re-schedule itself to run
one second in the future. If the migration has already finished, the
monitor lock is released and the user can use it normally.
All these changes should be transparent to the user.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
