If we want to qtest through hub, it would be much more simpler and
safer to configure the hub without host network. So silent this
warnings for qtest.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20181204035347.6148-3-jasowang@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We try to detect and drop too large packet (>INT_MAX) in 1592a99470
("net: ignore packet size greater than INT_MAX") during packet
delivering. Unfortunately, this is not sufficient as we may hit
another integer overflow when trying to queue such large packet in
qemu_net_queue_append_iov():
- size of the allocation may overflow on 32bit
- packet->size is integer which may overflow even on 64bit
Fixing this by moving the check to qemu_sendv_packet_async() which is
the entrance of all networking codes and reduce the limit to
NET_BUFSIZE to be more conservative. This works since:
- For the callers that call qemu_sendv_packet_async() directly, they
only care about if zero is returned to determine whether to prevent
the source from producing more packets. A callback will be triggered
if peer can accept more then source could be enabled. This is
usually used by high speed networking implementation like virtio-net
or netmap.
- For the callers that call qemu_sendv_packet() that calls
qemu_sendv_packet_async() indirectly, they often ignore the return
value. In this case qemu will just the drop packets if peer can't
receive.
Qemu will copy the packet if it was queued. So it was safe for both
kinds of the callers to assume the packet was sent.
Since we move the check from qemu_deliver_packet_iov() to
qemu_sendv_packet_async(), it would be safer to make
qemu_deliver_packet_iov() static to prevent any external user in the
future.
This is a revised patch of CVE-2018-17963.
Cc: qemu-stable@nongnu.org
Cc: Li Qiang <liq3ea@163.com>
Fixes: 1592a99470 ("net: ignore packet size greater than INT_MAX")
Reported-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20181204035347.6148-2-jasowang@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The original code just follow the TCP state diagram,
but in this case, we can skip the TCPS_TIME_WAIT state to simplify
the implementation.
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
-----BEGIN PGP SIGNATURE-----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=kPZX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging
Error reporting patches for 2018-10-22
# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2018-10-22: (40 commits)
error: Drop bogus "use error_setg() instead" admonitions
vpc: Fail open on bad header checksum
block: Clean up bdrv_img_create()'s error reporting
vl: Simplify call of parse_name()
vl: Fix exit status for -drive format=help
blockdev: Convert drive_new() to Error
vl: Assert drive_new() does not fail in default_drive()
fsdev: Clean up error reporting in qemu_fsdev_add()
spice: Clean up error reporting in add_channel()
tpm: Clean up error reporting in tpm_init_tpmdev()
numa: Clean up error reporting in parse_numa()
vnc: Clean up error reporting in vnc_init_func()
ui: Convert vnc_display_init(), init_keyboard_layout() to Error
ui/keymaps: Fix handling of erroneous include files
vl: Clean up error reporting in device_init_func()
vl: Clean up error reporting in parse_fw_cfg()
vl: Clean up error reporting in mon_init_func()
vl: Clean up error reporting in machine_set_property()
vl: Clean up error reporting in chardev_init_func()
qom: Clean up error reporting in user_creatable_add_opts_foreach()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This new usernet option can be used to add data for option 66 (tftp
server name) in the BOOTP reply, which is useful in PXE based automatic
OS install such as OpenBSD.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
When user provides a long domainname or hostname that doesn't fit in the
DHCP packet, we mustn't overflow the response packet buffer. Instead,
report errors, following the g_warning() in the slirp->vdnssearch
branch.
Also check the strlen against 256 when initializing slirp, which limit
is also from the protocol where one byte represents the string length.
This gives an early error before the warning which is harder to notice
or diagnose.
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Calling error_report() in a function that takes an Error ** argument
is suspicious. net_socket_fd_init() does that, and then fails without
setting an error. Wrong. I didn't analyze how exactly this can
break. A caller that reports the error on failure would crash.
Broken when commit c37f0bb1d0 (v2.11.0) converted the function to
Error. Fix by calling error_setg() instead of error_report().
Fixes: c37f0bb1d0
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-15-armbru@redhat.com>
When -netdev l2tpv3 fails, it first reports a specific error, then a
generic one, like this:
$ qemu-system-x86_64 -netdev l2tpv3,id=foo,src=,dst=,txsession=1
qemu-system-x86_64: -netdev l2tpv3,id=foo,src=,dst=,txsession=1: l2tpv3_open : could not resolve src, errno = Name or service not known
qemu-system-x86_64: Device 'l2tpv3' could not be initialized
With the command line, the messages go to stderr. In HMP, they go to
the monitor. In QMP, the second one becomes the error reply, and the
first one goes to stderr.
Convert net_init_tap() to Error. This suppresses the unwanted second
message, and makes the specific error the QMP error reply.
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181017082702.5581-14-armbru@redhat.com>
There should not be a reason for passing a packet size greater than
INT_MAX. It's usually a hint of bug somewhere, so ignore packet size
greater than INT_MAX in qemu_deliver_packet_iov()
CC: qemu-stable@nongnu.org
Reported-by: Daniel Shapira <daniel@twistlock.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
After one round of checkpoint, the states between PVM and SVM
become consistent, so it is unnecessary to adjust the sequence
of net packets for old connections, besides, while failover
happens, filter-rewriter will into failover mode that needn't
handle the new TCP connection.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Filter needs to process the event of checkpoint/failover or
other event passed by COLO frame.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It's a good idea to use notifier to notify COLO frame of
inconsistent packets comparing.
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
While do checkpoint, we need to flush all the unhandled packets,
By using the filter notifier mechanism, we can easily to notify
every compare object to do this process, which runs inside
of compare threads as a coroutine.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add almost full TCP state machine in filter-rewriter, except
TCPS_LISTEN and some simplify in VM active close FIN states.
The reason for this simplify job is because guest kernel will track
the TCP status and wait 2MSL time too, if client resend the FIN packet,
guest will resend the last ACK, so we needn't wait 2MSL time in filter-rewriter.
After a net connection is closed, we didn't clear its related resources
in connection_track_table, which will lead to memory leak.
Let's track the state of net connection, if it is closed, its related
resources will be cleared up.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is mostly for readability of the code. Let's make it clear which
callers can create an implicit monitor when the chardev is muxed.
This will also enforce a safer behaviour, as we don't really support
creating monitor anywhere/anytime at the moment. Add an assert() to
make sure the programmer explicitely wanted that behaviour.
There are documented cases, such as: -serial/-parallel/-virtioconsole
and to less extent -debugcon.
Less obvious and questionable ones are -gdb, SLIRP -guestfwd and Xen
console. Add a FIXME note for those, but keep the support for now.
Other qemu_chr_new() callers either have a fixed parameter/filename
string or do not need it, such as -qtest:
* qtest.c: qtest_init()
Afaik, only used by tests/libqtest.c, without mux. I don't think we
support it outside of qemu testing: drop support for implicit mux
monitor (qemu_chr_new() call: no implicit mux now).
* hw/
All with literal @filename argument that doesn't enable mux monitor.
* tests/
All with @filename argument that doesn't enable mux monitor.
On a related note, the list of monitor creation places:
- the chardev creators listed above: all from command line (except
perhaps Xen console?)
- -gdb & hmp gdbserver will create a "GDB monitor command" chardev
that is wired to an HMP monitor.
- -mon command line option
From this short study, I would like to think that a monitor may only
be created in the main thread today, though I remain skeptical :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
The "name" in the [hub_id name] parameter tuple is the same as a
"netdev_id" (which should be unique), so specifying the hub_id here
is just redundant (it was likely just necessary in the past when
the network subsystem was still using "vlans" only and when it did
not use unique "id"s yet).
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In early times, network backends were specified by a "vlan" and "name"
tuple. With the introduction of netdevs, the "name" was replaced by an
"id" (which is supposed to be unique), but the "name" parameter stayed
as an alias which could be used instead of "id". Unfortunately, we miss
the duplication check for "name":
$ qemu-system-x86_64 -net user,name=n1 -net user,name=n1
... starts without an error, while "id" correctly complains:
$ qemu-system-x86_64 -net user,id=n1 -net user,id=n1
qemu-system-x86_64: -net user,id=n1: Duplicate ID 'n1' for net
Instead of trying to fix the code for the legacy "name" parameter, let's
rather get rid of this old interface and deprecate the "name" parameter
now - this will also be less confusing for the users in the long run.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These options likely do not work as expected as soon as the user
tries to use more than one network interface at once. The parameters
have been marked as deprecated since QEMU v2.6, so users had plenty
of time to move their scripts to the new syntax. Time to remove the
old parameters now.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The memory leak on success to create a tap device. And the nfds and
nvhosts may not be the same and need to be processed separately.
Fixes: 07825977 ("tap: fix memory leak on failure to create a multiqueue tap device")
Fixes: 264986e2 ("tap: multiqueue support")
Cc: qemu-stable@nongnu.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
As qemu_new_net_client create new ncs but error happens later,
ncs will be left in global net_clients list and we can't use them any
more, so we need to cleanup them.
Cc: qemu-stable@nongnu.org
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If user forgets to provide any backend types for '-netdev' in qemu CLI,
It triggers seg fault.
e.g.
Expected:
$ qemu -netdev id=net0
qemu-system-x86_64: Parameter 'type' is missing
Actual:
$ qemu -netdev id=net0
Segmentation fault (core dumped)
Fixes: 547203ead4 ("net: List available netdevs with "-netdev help")
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
A guest boot hangs while probing the network interface when
iommu_platform=on is used.
The following qemu cli hangs without this patch:
# $QEMU \
-netdev tap,fd=3,id=hostnet0,vhost=on,vhostfd=4 3<>/dev/tap67 4<>/dev/host-net \
-device virtio-net-pci,netdev=hostnet0,id=net0,iommu_platform=on,disable-legacy=on \
...
Commit: c471ad0e9b (vhost_net: device IOTLB support) took care of
setting vhostfd to non-blocking when QEMU opens /dev/host-net but if
the fd is passed from qemu cli then we need to ensure that fd is set
to non-blocking.
Fixes: c471ad0e9b ("vhost_net: device IOTLB support")
Cc: qemu-stable@nongnu.org
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
A link property can be set during creation, with
object_property_add_link() and later with object_property_set_link().
add_link() doesn't add a reference to the target object, while
set_link() does.
Furthemore, OBJ_PROP_LINK_UNREF_ON_RELEASE flags, set during add_link,
says whether a reference must be released when the property is destroyed.
This can lead to leaks if the property was later set_link(), as the
added reference is never released.
Instead, rename OBJ_PROP_LINK_UNREF_ON_RELEASE to OBJ_PROP_LINK_STRONG
and use that has an indication on how the link handle reference
management in set_link().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180531195119.22021-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbEXNvAAoJECgfDbjSjVRpc8gH/R8xrcFrV+k9wwbgYcOcGb6Y
LWjseE31pqJcxRV80vLOdzYEuLStZQKQQY7xBDMlA5vdyvZxIA6FLO2IsiJSbFAk
EK8pclwhpwQAahr8BfzenabohBv2UO7zu5+dqSvuJCiMWF3jGtPAIMxInfjXaOZY
odc1zY2D2EgsC7wZZ1hfraRbISBOiRaez9BoGDKPOyBY9G1ASEgxJgleFgoBLfsK
a1XU+fDM6hAVdxftfkTm0nibyf7PWPDyzqghLqjR9WXLvZP3Cqud4p8N29mY51pR
KSTjA4FYk6Z9EVMltyBHfdJs6RQzglKjxcNGdlrvacDfyFi79fGdiosVllrjfJM=
=3+V0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi, vhost, misc: fixes, features
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 01 Jun 2018 17:25:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (31 commits)
vhost-blk: turn on pre-defined RO feature bit
ACPI testing: test NFIT platform capabilities
nvdimm, acpi: support NFIT platform capabilities
tests/.gitignore: add entry for generated file
arch_init: sort architectures
ui: use local path for local headers
qga: use local path for local headers
colo: use local path for local headers
migration: use local path for local headers
usb: use local path for local headers
sd: fix up include
vhost-scsi: drop an unused include
ppc: use local path for local headers
rocker: drop an unused include
e1000e: use local path for local headers
ioapic: fix up includes
ide: use local path for local headers
display: use local path for local headers
trace: use local path for local headers
migration: drop an unused include
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Reviewed-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This patch will allow the user to include the domainname option in
replies from the built-in DHCP server.
Signed-off-by: Benjamin Drung <benjamin.drung@profitbricks.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
When multi queue is enabled e.g. for a virtio-net device,
each queue pair will have a vhost_dev, and the only thing
shared between vhost devs currently is the chardev. This
patch introduces a vhost-user state structure which will
be shared by all vhost devs of the same virtio device.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are going to introduce a shared vhost user state which
will be named as 'VhostUserState'. So add 'Net' prefix to
the existing internal state structure in the vhost-user
netdev to avoid conflict.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'vlan' is very confusing since it does not mean something like IEEE
802.1Q, but rather emulated hubs, so let's switch to that terminology
instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It's been marked as deprecated since QEMU v2.9.0, so that should have
been enough time for everybody to either just drop unnecessary "vlan=0"
parameters, to switch to the modern -device + -netdev syntax for connecting
guest NICs with host network backends, or to switch to the "hubport" netdev
in case hubs are really wanted instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The early exits in case of errors leak the memory allocated for nd_id.
Fix it by using a "goto out" to the cleanup at the end of the function
instead.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Despite the fact that now when the initialization of vde fails, qemu
does not end silently, no informative error is printed. The patch
generates an error and pushes it through the calling function.
Related bug: https://bugs.launchpad.net/qemu/+bug/676029
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If the backend could not transmit a packet right away for some reason,
the packet is queued for asynchronous sending. The corresponding vq
element is tracked in the async_tx.elem field of the VirtIONetQueue,
for later freeing when the transmission is complete.
If a reset happens before completion, virtio_net_tx_complete() will push
async_tx.elem back to the guest anyway, and we end up with the inuse flag
of the vq being equal to -1. The next call to virtqueue_pop() is then
likely to fail with "Virtqueue size exceeded".
This can be reproduced easily by starting a guest with an hubport backend
that is not connected to a functional network, eg,
-device virtio-net-pci,netdev=hub0 -netdev hubport,id=hub0,hubid=0
and no other -netdev hubport,hubid=0 on the command line.
The appropriate fix is to ensure that such an asynchronous transmission
cannot survive a device reset. So for all queues, we first try to send
the packet again, and eventually we purge it if the backend still could
not deliver it.
CC: qemu-stable@nongnu.org
Reported-by: R. Nageswara Sastry <nasastry@in.ibm.com>
Buglink: https://github.com/open-power-host-os/qemu/issues/37
Signed-off-by: Greg Kurz <groug@kaod.org>
Tested-by: R. Nageswara Sastry <nasastry@in.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJanLRTAAoJEO8Ells5jWIRAxsH/3wX62o+msLjJHakjcu2OTMG
vdhnB8GfjC5HgMYbovG7TJ95KXg7VRodwru9zgJheTK7DG8fG0nFRuzr8L2tSAph
3s0YTFYDXJ6MBYD//ubdX+jNnchIvMlTX6yheAzcXvQb+nCcN2efN0XpSlGR+g4D
wGi1lWKurGEJE6RUfYPpbbUkjXjbbKyclE0RL+WBmmyruerXI8OxuXQ3GuHK75fb
cZLiToyP9+qnnDyT4lceG5vGRjYLtL8t1nB01M4UTr+tlCkMMsoOjufzGB/CDUdm
oGi1OuKRw06xTLroUJ/uiwSKQH6dMbrv6sLvk92dHnL9k2ZAjv2bVAgz8eAG7o0=
=pPIZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 05 Mar 2018 03:06:59 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap: setting error appropriately when calling net_init_tap_one()
hw/net: Remove unnecessary header includes
net: Add a new convenience option "--nic" to configure default/on-board NICs
net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commands
net: Remove the deprecated way of dumping network packets
net: Make net_client_init() static
net: Only show vhost-user in the help text if CONFIG_POSIX is defined
net: List available netdevs with "-netdev help"
net: Move error reporting from net_init_client/netdev to the calling site
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If netdev_add tap,id=net0,...,vhost=on failed in net_init_tap_one(),
the followed up device_add virtio-net-pci,netdev=net0 will fail
too, prints:
TUNSETOFFLOAD ioctl() failed: Bad file descriptor TUNSETOFFLOAD
ioctl() failed: Bad file descriptor
The reason is that the fd of tap is closed when error occured after
calling net_init_tap_one().
The fd should be closed when calling net_init_tap_one failed:
- if tap_set_sndbuf() failed
- if tap_set_sndbuf() succeeded but vhost failed to open or
initialize with vhostforce flag on
- with wrong vhost command line parameter
The fd should not be closed just because vhost failed to open or
initialize but without vhostforce flag. So the followed up
device_add can fall back to userspace virtio successfully.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The legacy "-net" option can be quite confusing for the users since most
people do not expect to get a "vlan" hub between their emulated guest
hardware and the host backend. But so far, we are also not able to get
rid of "-net" completely, since it is the only way to configure on-board
NICs that can not be instantiated via "-device" yet. It's also a little
bit shorter to type "-net nic -net tap" instead of "-device xyz,netdev=n1
-netdev tap,id=n1".
So what we need is a new convenience option that is shorter to type than
the full -device + -netdev stuff, and which can be used to configure the
on-board NICs that can not be handled via -device yet. Thus this patch now
provides such a new option "--nic": It adds an entry in the nd_table to
configure a on-board / default NIC, creates a host backend and connects
the two directly, without a confusing "vlan" hub inbetween.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
They are deprecated since QEMU v2.10, and so far nobody complained that
these commands are still necessary for any reason - and since you can use
'netdev_add' and 'netdev_remove' instead, there also should not be any
real reason. Since they are also standing in the way for the upcoming
'vlan' clean-up, it's now time to remove them.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
"-net dump" has been marked as deprecated since QEMU v2.10, since it
only works with the deprecated 'vlan' parameter (or hubs). Network
dumping should be done with "-object filter-dump" nowadays instead.
Since nobody complained so far about the deprecation message, let's
finally get rid of "-net dump" now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The function is only used within net.c, so there's no need that
this is a global function.
While we're at it, also remove the unused prototype compute_mcast_idx()
(the function has been removed in commit d9caeb09b1).
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Other options like "-chardev" or "-device" feature a nice help text
with the available devices when being called with "help" or "?".
Since it is quite useful, especially if you want to see which network
backends have been compiled into the QEMU binary, let's provide such
a help text for "-netdev", too.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It looks strange that net_init_client() and net_init_netdev() both
take an "Error **errp" parameter, but then do the error reporting
with "error_report_err(local_err)" on their own. Let's move the
error reporting to the calling site instead to simplify this code
a little bit.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
g_free() was moved from vhost_net_cleanup in commit e6bcb1b, so we should
free net after vhost_net_cleanup
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Reviewed-by: Marc-André Lureau < marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Connection to the real host CAN bus network through
SocketCAN network interface is available only for Linux
host system. Mechanism is generic, support for another
CAN API and operating systems can be implemented in future.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CanBusState state structure is created for each
emulated CAN channel. Individual clients/emulated
CAN interfaces or host interface connection registers
to the bus by CanBusClientState structure.
The CAN core is prepared to support connection to the
real host CAN bus network. The commit with such support
for Linux SocketCAN follows.
Implementation is as simple as possible. There is no state to be
migrated, and messages prioritization and queuing are not considered
for now. But it is intended to be extended when need arises.
Development repository and more documentation at
https://gitlab.fel.cvut.cz/canbus/qemu-canbus
The work is based on Jin Yang GSoC 2013 work funded
by Google and mentored in frame of RTEMS project GSoC
slot donated to QEMU.
Rewritten for QEMU-2.0+ versions and architecture cleanup
by Pavel Pisa (Czech Technical University in Prague).
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-6-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-4-armbru@redhat.com>
It does not make much sense to limit these commands to the legacy 'vlan'
concept only, they should work with the modern netdevs, too. So now
it is possible to use this command with one, two or three parameters.
With one parameter, the command installs a hostfwd rule on the default
"user" network:
hostfwd_add tcp:...
With two parameters, the command installs a hostfwd rule on a netdev
(that's the new way of using this command):
hostfwd_add netdev_id tcp:...
With three parameters, the command installs a rule on a 'vlan' (aka hub):
hostfwd_add hub_id name tcp:...
Same applies to the hostfwd_remove command now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
QEMU can emulate hubs to connect NICs and netdevs. This is currently
primarily used for the mis-named 'vlan' feature of the networking
subsystem. Now the 'vlan' feature has been marked as deprecated, since
its name is rather confusing and the users often rather mis-configure
their network when trying to use it. But while the 'vlan' parameter
should be removed at one point in time, the basic idea of emulating
a hub in QEMU is still good: It's useful for bundling up the output of
multiple NICs into one single l2tp netdev for example.
Now to be able to use the hubport feature without 'vlan's, there is one
missing piece: The possibility to connect a hubport to a netdev, too.
This patch adds this possibility by introducing a new "netdev=..."
parameter to the hubports.
To bundle up the output of multiple NICs into one socket netdev, you can
now run QEMU with these parameters for example:
qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \
-netdev hubport,hubid=1,id=h1,netdev=s1 \
-netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \
-netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3
For using the socket netdev, you have got to start another QEMU as the
receiving side first, for example with network dumping enabled:
qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \
-device ne2k_isa,netdev=s0 \
-object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat
After the ppc64 guest tried to boot from both NICs, you can see in the
dump file (using Wireshark, for example), that the output of both NICs
(the e1000 and the virtio-net-pci) has been successfully transfered
via the socket netdev in this case.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Packet size some time different or when network is busy.
Based on same payload size, but TCP protocol can not
guarantee send the same one packet in the same way,
like that:
We send this payload:
------------------------------
| header |1|2|3|4|5|6|7|8|9|0|
------------------------------
primary:
ppkt1:
----------------
| header |1|2|3|
----------------
ppkt2:
------------------------
| header |4|5|6|7|8|9|0|
------------------------
secondary:
spkt1:
------------------------------
| header |1|2|3|4|5|6|7|8|9|0|
------------------------------
In the original method, ppkt1 and ppkt2 are different in size and
spkt1, so they can't compare and trigger the checkpoint.
I have tested FTP get 200M and 1G file many times, I found that
the performance was less than 1% of the native.
Now I reconstructed the comparison of TCP packets based on the
TCP sequence number. first of all, ppkt1 and spkt1 have the same
starting sequence number, so they can compare, even though their
length is different. And then ppkt1 with a smaller payload length
is used as the comparison length, if the payload is same, send
out the ppkt1 and record the offset(the length of ppkt1 payload)
in spkt1. The next comparison, ppkt2 and spkt1 can be compared
from the recorded position of spkt1.
like that:
----------------
| header |1|2|3| ppkt1
---------|-----|
| |
---------v-----v--------------
| header |1|2|3|4|5|6|7|8|9|0| spkt1
---------------|\------------|
| \offset |
---------v-------------v
| header |4|5|6|7|8|9|0| ppkt2
------------------------
In this way, the performance can reach native 20% in my multiple
tests.
Cc: Zhang Chen <zhangckid@gmail.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Reviewed-by: Zhang Chen <zhangckid@gmail.com>
Tested-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Modified the function colo_packet_compare_common to prepare for the
tcp packet comparison in the next patch.
Cc: Zhang Chen <zhangckid@gmail.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Reviewed-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It has never been documented, so hardly anybody knows about this
parameter, and it is marked as deprecated since QEMU v2.6.
Time to let it go now.
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Now that all of the callers have been converted to compute the multicast index
inline using new net CRC functions, this function can now be dropped.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This provides a standard ethernet CRC32 little-endian implementation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Separate out the standard ethernet CRC32 calculation into a new net_crc32()
function, renaming the constant POLYNOMIAL to POLYNOMIAL_BE to make it clear
that this is a big-endian CRC32 calculation.
As part of the constant rename, remove the duplicate definition of POLYNOMIAL
from eepro100.c and use the new POLYNOMIAL_BE constant instead.
Once this is complete remove the existing CRC32 implementation from
compute_mcast_idx() and call the new net_crc32() function in its place.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Zhang Chen <zhangckid@gmail.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 8ec1440202
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This fixes coverity issue CID1005339.
Make sure that saddr is not used uninitialized if the
mcast parameter is NULL.
Cc: qemu-stable@nongnu.org
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Consolidate the code that extract the ip address(src,dst) and
port number(src,dst) of the packet into a separate routine
extract_ip_and_port() since the same chunk of code is called
from two place.
Cc: Zhang Chen <zhangckid@gmail.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Cc: Zhang Chen <zhangckid@gmail.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
A package from pri_indev or sec_indev only belongs to a particular
Connection, so we only need to compare the package in the specified
Connection's primary_list and secondary_list, rather than for each
the whole Connection list to compare. This is time-consuming and
unnecessary.
Less checkpoint more efficiency.
Cc: Zhang Chen <zhangckid@gmail.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Currently, a packet from pri_dev or sec_dev is fristly pushed at the
tail of the primary or secondary packet queue then sorted by the tcp
sequence number.
Now, this patch use g_queue_insert_sorted to insert the packet directly
into the suitable position to avoid ordering all packets each time when
a new packet is comming, thereby increasing efficiency.
In addition, consolidate the code that add a packet to the list of
Connection (primary or secondary) into a separate routine colo_insert_packet()
since the same chunk of code is called from two place.
Cc: Zhang Chen <zhangckid@gmail.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since commit 0f8c289ad "net: fix -netdev socket,fd= for UDP sockets"
we allow more than one parameter for -netdev socket. But now
we run into an assert when no parameter at all is specified
> qemu-system-x86_64 -netdev socket
socket.c:729: net_init_socket: Assertion `sock->has_udp' failed.
Fix this by reverting the change of the if condition done in 0f8c289ad.
Cc: Jason Wang <jasowang@redhat.com>
Cc: qemu-stable@nongnu.org
Fixes: 0f8c289ad5
Reported-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When using filter-mirror like the example below where the interface
'ndev0' does not exist on the host, QEMU crashes into segmentation
fault.
$ qemu-system-x86_64 -S -machine pc -netdev user,id=ndev0 -object filter-mirror,id=test-object,netdev=ndev0
This happens because the function filter_mirror_setup() does not check
if the device actually exists and still keep on processing calling
qemu_chr_find(). This patch fixes this issue.
Signed-off-by: Eduardo Otubo <otubo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
e.g.
./x86_64-softmmu/qemu-system-x86_64 -nographic -netdev 'user,id=vnet,hostfwd=:555.0.0.0:0-:22'
qemu-system-x86_64: -netdev user,id=vnet,hostfwd=:555.0.0.0:0-:22: Invalid host forwarding rule ':555.0.0.0:0-:22' (Bad host address)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tidy up some of the warn_report() messages after having converted them
to use warn_report().
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <9cb1d23551898c9c9a5f84da6773e99871285120.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using these commands:
find ./* -type f -exec sed -i \
'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
Indentation fixed up manually afterwards.
Some of the lines were manually edited to reduce the line length to below
80 charecters. Some of the lines with newlines in the middle of the
string were also manually edit to avoid checkpatch errrors.
The #include lines were manually updated to allow the code to compile.
Several of the warning messages can be improved after this patch, to
keep this patch mechanical this has been moved into a later patch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all the single line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using this command:
find ./* -type f -exec sed -i \
's|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig' \
{} +
Some of the lines were manually edited to reduce the line length to below
80 charecters.
The #include lines were manually updated to allow the code to compile.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com> [mips]
Message-Id: <ae8f8a7f0a88ded61743dff2adade21f8122a9e7.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the task which check old packet in the comparing thread,
then use IOthread context timer to handle it.
Process pactkets in the IOThread which arrived over the socket.
we use iothread_get_g_main_context to create a new g_main_loop in
the IOThread.then the packets from the primary and the secondary
are processed in the IOThread.
Finally remove the colo-compare thread using the IOThread instead.
Reviewed-by: Zhang Chen<zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wang Yong <wang.yong155@zte.com.cn>
Signed-off-by: Wang Guang <wang.guang55@zte.com.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The packet_enqueue() use g_queue_push_tail() to
enqueue net packet, so it is more efficent way use
g_queue_pop_head() to get packet for compare.
That will improve the success rate of comparison.
In my test the performance of ftp put 1000M file
will increase 10%
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When network is busy, some tcp options(like sack) will unpredictable
occur in primary side or secondary side. it will make packet size
not same, but the two packet's payload is identical. colo just
care about packet payload, so we skip the option field.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When -net socket fails, it first reports a specific error, then
a generic one, like this:
$ ./x86_64-softmmu/qemu-system-x86_64 -net socket,mcast=230.0.0.1:1234,listen
qemu-system-x86_64: -net socket,mcast=230.0.0.1:1234,listen: exactly one of listen=, connect=, mcast= or udp= is required
qemu-system-x86_64: -net socket,mcast=230.0.0.1:1234,listen: Device 'socket' could not be initialized
Convert net_socket_*_init() to Error to get rid of the superfluous second
error message. After the patch, the effect like this:
$ ./x86_64-softmmu/qemu-system-x86_64 -net socket,mcast=230.0.0.1:1234,listen
qemu-system-x86_64: -net socket,mcast=230.0.0.1:1234,listen: exactly one of listen=, connect=, mcast= or udp= is requireda
This also fixes a few silent failures to report an error.
Cc: jasowang@redhat.com
Cc: armbru@redhat.com
Cc: berrange@redhat.com
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Currently, net_socket_mcast_create(), net_socket_fd_init_dgram() and
net_socket_fd_init() use the function such as fprintf(), perror() to
report an error message.
Now, convert these functions to Error.
Cc: jasowang@redhat.com
Cc: armbru@redhat.com
Cc: berrange@redhat.com
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In net_socket_fd_init(), the 'default' case is odd: it warns,
then continues as if the socket type was SOCK_STREAM. The
comment explains "this could be a eg. a pty", but that makes
no sense. If @fd really was a pty, getsockopt() would fail
with ENOTSOCK. If @fd was a socket, but neither SOCK_DGRAM nor
SOCK_STREAM. It should not be treated as if it was SOCK_STREAM.
Turn this case into an Error. If there is a genuine reason to
support something like SOCK_RAW, it should be explicitly
handled.
Cc: jasowang@redhat.com
Cc: armbru@redhat.com
Cc: berrange@redhat.com
Cc: armbru@redhat.com
Cc: eblake@redhat.com
Suggested-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Because vnet_hdr have a offset to net packet, we must add it when use
virtio-net.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.
The sentinel will be dropped next.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
This patch fixes -netdev socket,fd= for UDP sockets
Currently -netdev socket,fd=<...> results in
qemu: error: specified mcastaddr "127.0.0.1" (0x7f000001) does not
contain a multicast address
qemu-system-x86_64: -netdev
socket,id=n1,fd=3: Device 'socket' could not be initialized
To fix these we need to allow specifying multicast and fd arguments
for the same netdev. With this the user can specify "-netdev
fd=3,mcast=<IP:port>"
Cc: Jason Wang <jasowang@redhat.com>
Fixes: 3d830459b1
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With "-netdev user,id=net0,dns=1.2.3.4"
error was:
qemu-system-i386: -netdev user,id=net0,dns=1.2.3.4: Device 'user' could not be initialized
Error is now:
qemu-system-i386: -netdev user,id=net0,dns=1.2.3.4: DNS doesn't belong to network
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
"nc" is freed after hotplug vhost-user, but the watcher is not removed.
The QEMU crash when the watcher access the "nc" when socket disconnects.
Program received signal SIGSEGV, Segmentation fault.
#0 object_get_class (obj=obj@entry=0x2) at qom/object.c:750
#1 0x00007f9bb4180da1 in qemu_chr_fe_disconnect (be=<optimized out>) at chardev/char-fe.c:372
#2 0x00007f9bb40d1100 in net_vhost_user_watch (chan=<optimized out>, cond=<optimized out>, opaque=<optimized out>) at net/vhost-user.c:188
#3 0x00007f9baf97f99a in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
#4 0x00007f9bb41d7ebc in glib_pollfds_poll () at util/main-loop.c:213
#5 os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:261
#6 main_loop_wait (nonblocking=nonblocking@entry=0) at util/main-loop.c:515
#7 0x00007f9bb3e266a7 in main_loop () at vl.c:1917
#8 main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4786
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Code that checks dstate is unaware of SystemTap and LTTng UST dstate, so
the following trace event will not fire when solely enabled by SystemTap
or LTTng UST:
if (trace_event_get_state(TRACE_MY_EVENT)) {
str = g_strdup_printf("Expensive string to generate ...",
...);
trace_my_event(str);
g_free(str);
}
Add trace_event_get_state_backends() to fetch backend dstate. Those
backends that use QEMU dstate fetch it as part of
generate_h_backend_dstate().
Update existing trace_event_get_state() callers to use
trace_event_get_state_backends() instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170731140718.22010-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
So we have sizeof(struct in6_address) != sizeof(uintptr_t)
and Clang > Coverity on this, see 4555ca6816 :)
net/eth.c:426:30: warning: The code calls sizeof() on a pointer type. This can produce an unexpected result
return bytes_read == sizeof(dst_addr);
^ ~~~~~~~~~~
net/eth.c:475:34: warning: The code calls sizeof() on a pointer type. This can produce an unexpected result
return bytes_read == sizeof(src_addr);
^ ~~~~~~~~~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We add the vnet_hdr_support option for filter-rewriter, default is disabled.
If you use virtio-net-pci or other driver needs vnet_hdr, please enable it.
You can use it for example:
-object filter-rewriter,id=rew0,netdev=hn0,queue=all,vnet_hdr_support
We get the vnet_hdr_len from NetClientState that make us
parse net packet correctly.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
COLO-Proxy just focus on packet payload, so we skip vnet header.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Make colo-compare and filter-rewriter can parse vnet packet.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add the vnet_hdr_support option for colo-compare, default is disabled.
If you use virtio-net-pci or other driver needs vnet_hdr, please enable it.
You can use it for example:
-object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0,vnet_hdr_support
COLO-compare can get vnet header length from filter,
Add vnet_hdr_len to struct packet and output packet with
the vnet_hdr_len.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch change the compare_chr_send() parameter from CharBackend to CompareState,
we can get more information like vnet_hdr(We use it to support packet with vnet_header).
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We can use this property flush and send packet with vnet_hdr_len.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add the vnet_hdr_support option for filter-redirector, default is disabled.
If you use virtio-net-pci net driver or other driver needs vnet_hdr, please enable it.
Because colo-compare or other modules needs the vnet_hdr_len to parse
packet, we add this new option send the len to others.
You can use it for example:
-object filter-redirector,id=r0,netdev=hn0,queue=tx,outdev=red0,vnet_hdr_support
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add the vnet_hdr_support option for filter-mirror, default is disabled.
If you use virtio-net-pci or other driver needs vnet_hdr, please enable it.
You can use it for example:
-object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0,vnet_hdr_support
If it has vnet_hdr_support flag, we will change the sending packet format from
struct {int size; const uint8_t buf[];} to {int size; int vnet_hdr_len; const uint8_t buf[];}.
make other module(like colo-compare) know how to parse net packet correctly.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch change the filter_send() parameter from CharBackend to MirrorState,
we can get more information like vnet_hdr(We use it to support packet with vnet_header).
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add a flag to decide whether net_fill_rstate() need read
the vnet_hdr_len or not.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add vnet_hdr_len arguments in NetClientState
that make other module get real vnet_hdr_len easily.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
frontends should avoid accessing CharDriver struct where possible
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-6-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Frontends should have an interface to setup the handler of a backend change.
The interface will be used in the next commits
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert all uses of error_report("warning:"... to use warn_report()
instead. This helps standardise on a single method of printing warnings
to the user.
All of the warnings were changed using these two commands:
find ./* -type f -exec sed -i \
's|error_report(".*warning[,:] |warn_report("|Ig' {} +
Indentation fixed up manually afterwards.
The test-qdev-global-props test case was manually updated to ensure that
this patch passes make check (as the test cases are case sensitive).
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Lieven <pl@kamp.de>
Cc: Josh Durgin <jdurgin@redhat.com>
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Peter Chubb <peter.chubb@nicta.com.au>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Greg Kurz <groug@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed by: Peter Chubb <peter.chubb@data61.csiro.au>
Acked-by: Max Reitz <mreitz@redhat.com>
Acked-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <e1cfa2cd47087c248dd24caca9c33d9af0c499b0.1499866456.git.alistair.francis@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use the actual unsigned integer type name.
The type name change impacts the following externally visible area:
* vl.c's machine_help_func() puts it in help for -machine NAME,help.
* QMP command qom-list exposes it in ObjectPropertyInfo member @type.
* QMP command device-list-properties exposes it in DevicePropertyInfo
member @type.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-15-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This reverts commit 883e4f7624.
This code changed net/socket.c from using socket()+connect(),
to using socket_connect(). In theory this is great, but in
practice this has completely broken the ability to connect
the frontend and backend:
$ ./x86_64-softmmu/qemu-system-x86_64 \
-device e1000,id=e0,netdev=hn0,mac=DE:AD:BE:EF:AF:05 \
-netdev socket,id=hn0,connect=localhost:1234
qemu-system-x86_64: -device e1000,id=e0,netdev=hn0,mac=DE:AD:BE:EF:AF:05: Property 'e1000.netdev' can't find value 'hn0'
The old code would call net_socket_fd_init() synchronously,
while letting the connect() complete in the backgorund. The
new code moved net_socket_fd_init() so that it is only called
after connect() completes in the background.
Thus at the time we initialize the NIC frontend, the backend
does not exist.
The socket_connect() conversion as done is a bad fit for the
current code, since it did not try to change the way it deals
with async connection completion. Rather than try to fix this,
just revert the socket_connect() conversion entirely.
The code is about to be converted to use QIOChannel which
will let the problem be solved in a cleaner manner. This
revert is more suitable for stable branches in the meantime.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This simplifies removing a backend for a frontend user (no need to
retrieve the associated driver and separate delete call etc).
NB: many frontends have questionable handling of ending a chardev. They
should probably delete the backend to prevent broken reusage.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Move all the frontend struct and methods to a seperate unit. This avoids
accidentally mixing backend and frontend calls, and helps with readabilty.
Make qemu_chr_replay() a macro shared by both char and char-fe.
Export qemu_chr_write(), and use a macro for qemu_chr_write_all()
(nb: yes, CharBackend is for char frontend :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Because filter_mirror_receive_iov() and filter_redirector_receive_iov()
both use the filter_mirror_send() to send packet, so I change
filter_mirror_send() to filter_send() that looks more common.
And fix some codestyle.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The s->outdev have checked in filter_mirror_set_outdev().
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The netdev_add and netdev_del commands should be used nowadays instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Because of previous patch's trace arguments over the limit
of UST backend, so I rewrite the patch.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Network dumping should be done with "-object filter-dump" nowadays.
Using "-net dump" via the VLAN mechanism is considered as deprecated
and might be removed in a future release. So warn the users now
to inform them to user the filter-dump method instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The files tap-haiku.c and tap-aix.c are identical (except one line
of error message). We should avoid such code duplication, so replace
these by a generic tap-stub.c file instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add a /chardevs container object to hold the list of chardevs.
(Note: QTAILQ chardevs is going away in the following commits)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
gcc 7 (on fedora 26) objects to many of the snprintf's
in the smb path and command creation because it can't
figure out that the smb_dir (i.e. the /tmp dir for the configuration)
is known to be short.
Replace all these fixed length buffers by g_str* functions that dynamically
allocate and use g_dir_make_tmp to make the directory.
(It's fairly new glib but we have a compat function for it).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
The OS will allocate automatically a free port. This is useful if you
want to be sure to not get any port conflict. You still have to figure
out which port you got, for example with "lsof" (this could be exposed
in the monitor if needed).
Example of use:
$ qemu-system-x86_64 -net user,hostfwd=127.0.0.1:0-:22 ...
Then, get your port with:
$ lsof -np 1474 | grep LISTEN
qemu-syst 31777 bernat 12u IPv4 [...] TCP 127.0.0.1:35145 (LISTEN)
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This reverts commit 0fc8aec7de.
In commit 2dfe5113b1 we split a trace event with a lot of arguments
in two, because the UST trace backend has a limit on the number
of arguments you can have in a single trace event. Unfortunately
we subsequently forgot about this, and in commit 0fc8aec7de
we merged the two trace events again, recreating the "UST backend
doesn't build" bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJY/zFbAAoJEO8Ells5jWIR7LgH/A6lWkODVSKihnibRH82J9oe
rTsDdLgAGAMAur++tmNorPadZyMe/2+Cu0VsiIv591ldILruN6+jJydBzFtWFYE5
JQKa2VSTDu6bHPhr/UpRnWLhGzaJogklJR6YLkonDJznb1UnnTwEZ8c8+XD4gWLo
byo/dYF1yMnpVxSak/FkmCmwxc2K7s7P+r4FWO2CgAgY28F+/qERWJMbl1iUevQP
E1PC/XXEvhMdxi+6oYmWACdbW9/KwC5KKVELsQWYU1DcpQ7rWXCtA/mtKxvX+ePw
7CUK9ldeFXHE8uWVDnh3cWUL65Q8OtZarjMbrnN7xzcQDhMysStvVNS4QckN6/I=
=PEvc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Tue 25 Apr 2017 12:22:03 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
COLO-compare: Optimize tcp compare trace event
COLO-compare: Optimize tcp compare for option field
slirp: add a fake NC-SI backend
aspeed: add a FTGMAC100 nic
net/ftgmac100: add a 'aspeed' property
net: add FTGMAC100 support
hw/net: add MII definitions
colo-compare: Fix old packet check bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Optimize two trace events as one, adjust print format make
it easy to read. rename trace_colo_compare_pkt_info_src/dst
to trace_colo_compare_tcp_info.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In this patch we support packet that have tcp options field.
Add tcp options field check, If the packet have options
field we just skip it and compare tcp payload,
Avoid unnecessary checkpoint, optimize performance.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If colo-compare find one old packet,we can notify colo-frame
do checkpoint, no need continue find more old packet here.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Because of inet_ntoa() return a statically allocated buffer,
subsequent calls will overwrite, So we fix this bug.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add offset args for colo_packet_compare_common, optimize
colo_packet_compare_icmp() and colo_packet_compare_udp()
just compare the IP payload. Before compare all tcp packet,
we compare tcp checksum firstly, this function can get
better performance.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Rename colo_packet_compare() to colo_packet_compare_common() that
make tcp_compare udp_compare icmp_compare reuse this function.
Remove minimum packet size check in icmp_compare, because we have
check this in parse_packet_early().
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
While the offset of packets's sequence for primary side and
secondary side is zero, it is unnecessary to call net_checksum_calculate()
to recalculate the checksume value of packets.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The 'primary_list' and 'secondary_list' members of struct Connection
is not allocated through dynamically g_queue_new(), but we free it by using
g_queue_free(), which will lead to a double-free bug.
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We use g_queue_init() to init s->conn_list, so we should use g_queue_clear()
to instead of g_queue_free().
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We will catch the bellow error report while try to delete compare object
by qmp command:
chardev/char-io.c:91: io_watch_poll_finalize: Assertion `iwp->src == ((void *)0)' failed.
This is caused by failing to remove the right fd been watched while
call qemu_chr_fe_set_handlers();
Fix it by pass the worker_context parameter to qemu_chr_fe_set_handlers().
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We should call g_main_loop_quit() to notify colo compare thread to
exit, Or it will run in g_main_loop_run() forever.
Besides, the finalizing process can't happen in context of colo thread,
it is reasonable to remove the 'if (qemu_thread_is_self(&s->thread))'
branch.
Before compare thead exits, some cleanup works need to be
done, All unhandled packets need to be released and connection_track_table
needs to be freed, or there will be memory leak.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Instead of using qemu timer to process the stale packets,
We re-use the colo compare thread to process these packets
by creating a new timeout coroutine.
Besides, since we process all the same vNIC's net connection/packets
in one thread, it is safe to remove the timer_check_lock.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Make VLAN stripping functions return number of bytes
copied to given Ethernet header buffer.
This information should be used to re-compose
packet IOV after VLAN stripping.
Cc: qemu-stable@nongnu.org
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since commit b0a335e351, a socket write
may trigger a disconnect events, calling vhost_user_stop() and clearing
all the vhost_dev strutures holding data that vhost.c functions expect
to remain valid. Delay the cleanup to keep the vhost_dev structure
valid during the vhost.c functions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170227104956.24729-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Simple unions are simpler than flat unions in the schema, but more
complicated in C and on the QMP wire: there's extra indirection in C
and extra nesting on the wire, both pointless. They're best avoided
in new code.
NetLegacyOptions isn't new, but it's only used internally, not in QMP.
Convert it to a flat union.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487709988-14322-3-git-send-email-armbru@redhat.com>
Improve efficiency of TCP packet comparison.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The 'vlan' parameter is a continuous source of confusion for the users,
many people mix it up with the more common term VLAN (the link layer
packet encapsulation), and even if they realize that the QEMU 'vlan' is
rather some kind of network hub emulation, there is still a high risk
that they configure their QEMU networking in a wrong way with this
parameter (e.g. by hooking NICs together, so they get a 'loopback'
between one and the other NIC).
Thus at one point in time, we should finally get rid of the 'vlan'
feature in QEMU. Let's do a first step in this direction by declaring
the 'vlan' parameter as deprecated and informing the users to use the
'netdev' parameter instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Remove the chardev implicitly when cleaning up the netdev. This
prevents from reusing the chardev since it would be in an incorrect
state with the slave.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1256618
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Pick a uniform chardev type name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJYgXzxAAoJEO8Ells5jWIRgtAIAKuFrOBE/xJnjd/45sVKcx2j
fsohKHF8T/eLmt5sw+MhGtnM/oRJRUX8kGpA9AU8m6TCSaTYh2tOKX5lwrykuAzk
feqz2pqZFwiLWs5Ro7qEQIhMkqtFetODvKd05qnKnAldj8SC45czKxdghmSP/B+w
4nnDEdqVqUuUseDCa1mW1b4f6g1N93LbgChK7lK9Xqg+OqeEbQ7nLgVvcWvN7+Ea
DfDKWP8tjQ5QhjzFWc4wa9/Tx+0HI7Dn57fv98XdJMvm1kt/MdnO7QKAXWmHH5s/
6DX+NHgN0ZAn85gv/ufq1F9C4TstbAoZA9EOGhoBJ5ww8mueARB3L2iCj+OcS9A=
=gkbh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Fri 20 Jan 2017 02:58:57 GMT
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap: fix memory leak on failure in net_init_tap()
hw/pci: use-after-free in pci_nic_init_nofail when nic device fails to initialize
hw/net/dp8393x: Avoid unintentional sign extensions on addresses
m68k: QOMify the MCF Fast Ethernet Controller device
net: optimize checksum computation
docs: Fix description of the sentence
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 091a6b2ac fixed most of the memory leaks in failure
paths in net_init_tap() reported by Coverity (CID 1356216),
but missed one. Fix it by deferring the allocation of
fds and vhost_fds until after the error check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Very simple loop optimization with a significant performance impact.
Microbenchmark results, modern x86-64:
buffer size | speed up
------------+---------
1500 | 1.7x
64 | 1.5x
8 | 1.15x
Microbenchmark results, POWER7:
buffer size | speed up
------------+---------
1500 | 5x
64 | 3.3x
8 | 1.13x
There is a lot of room for further improvement at the expense of
code complexity - aligned multibyte reads, LE/BE considerations,
architecture-specific optimizations, etc. This patch still keeps
things simple and readable.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patches implements Device IOTLB support for vhost kernel. This is
done through:
1) switch to use dma helpers when map/unmap vrings from vhost codes
2) introduce a set of VhostOps to:
- setting up device IOTLB request callback
- processing device IOTLB request
- processing device IOTLB invalidation
2) kernel support for Device IOTLB API:
- allow vhost-net to query the IOMMU IOTLB entry through eventfd
- enable the ability for qemu to update a specified mapping of vhost
- through ioctl.
- enable the ability to invalidate a specified range of iova for the
device IOTLB of vhost through ioctl. In x86/intel_iommu case this is
triggered through iommu memory region notifier from device IOTLB
invalidation descriptor processing routine.
With all the above, kernel vhost_net can co-operate with userspace
IOMMU. For vhost-user, the support could be easily done on top by
implementing the VhostOps.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds support of recording and replaying network packets in
irount rr mode.
Record and replay for network interactions is performed with the network filter.
Each backend must have its own instance of the replay filter as follows:
-netdev user,id=net1 -device rtl8139,netdev=net1
-object filter-replay,id=replay,netdev=net1
Replay network filter is used to record and replay network packets. While
recording the virtual machine this filter puts all packets coming from
the outer world into the log. In replay mode packets from the log are
injected into the network device. All interactions with network backend
in replay mode are disabled.
v5 changes:
- using iov_to_buf function instead of loop
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
