qemu-iotests 041 left quorum_snapshot.img and target.img behind in the
scratch directory. Make sure to clean up after completing the tests.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The new test 190 ensures we don't regress back to an infinite loop when
measuring the size of a 2T+ qcow2 image. I did not append to test 178,
because that test is also designed to run with format 'raw'; also, this
gives us some coverage of the measure command under the quick group.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We had a bug for multiple releases where dirty-bitmap count was
documented in bytes but reported in sectors; enhance the testsuite
to add coverage of DirtyBitmapInfo to ensure we do not regress again.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Without redirecting qemu's stderr to stdout, _filter_qemu will not apply
to warnings. This results in $QEMU_PROG not being replaced by QEMU_PROG
which is not great if your qemu executable is not called
qemu-system-x86_64 (e.g. qemu-system-i386).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On one hand, the _make_test_img invocation for creating the target image
was missing a -u because its backing file is not supposed to exist at
that point.
On the other hand, nobody noticed probably because the backing file is
created later on and _cleanup failed to remove it: The quotation marks
were misplaced so bash tried to delete a file literally called
"$TEST_IMG{,.target}..." instead of performing brace expansion. Thus, the
files stayed around after the first run and qemu-img create did not
complain about a missing backing file on any run but the first.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commits 70f17a1 ('error: Revert unwanted change of warning messages')
and e1824e5 ('qemu-iotests: Test 'info block'') had a semantic merge
conflict, which results in failure for qemu-iotests case 186. Fix the
reference output to consider the changes of 70f17a1.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1500973176-29235-1-git-send-email-kwolf@redhat.com
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test cases 030, 041 and 055 used to sleep for a second after calling
block-job-pause to make sure that the block job had time to actually
get into paused state. We can instead poll its status and use that one
second only as a timeout.
The tests also slept a second for checking that the block jobs don't
make progress while being paused. Half a second is more than enough for
this.
These changes reduce the total time for the three tests by 25 seconds on
my laptop (from 155 seconds to 130).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commits 0db832f and 6cdbceb introduced the automatic insertion of filter
nodes above the top layer of mirror and commit block jobs. The
assumption made there was that since libvirt doesn't do node-level
management of the block layer yet, it shouldn't be affected by added
nodes.
This is true as far as commands issued by libvirt are concerned. It only
uses BlockBackend names to address nodes, so any operations it performs
still operate on the root of the tree as intended.
However, the assumption breaks down when you consider query commands,
which return data for the wrong node now. These commands also return
information on some child nodes (bs->file and/or bs->backing), which
libvirt does make use of, and which refer to the wrong nodes, too.
One of the consequences is that oVirt gets wrong information about the
image size and stops the VM in response as long as a mirror or commit
job is running:
https://bugzilla.redhat.com/show_bug.cgi?id=1470634
This patch fixes the problem by hiding the implicit nodes created
automatically by the mirror and commit block jobs in the output of
query-block and BlockBackend-based query-blockstats as long as the user
doesn't indicate that they are aware of those nodes by providing a node
name for them in the QMP command to start the block job.
The node-based commands query-named-block-nodes and query-blockstats
with query-nodes=true still show all nodes, including implicit ones.
This ensures that users that are capable of node-level management can
still access the full information; users that only know BlockBackends
won't use these commands.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
A run of './check -qcow2 -g quick' on my machine produced only
two tests that took longer than 5 seconds; 178 took 18, and
189 took 7. Remove them from the quick group.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockdevRef is an alternate of BlockdevOptions (inline definition) and
str (reference to an existing block device by name). BlockdevRef
value "" is special: "no block device should be referenced." It's
actually interpreted that way in just one place: optional member
@backing of COW formats. Semantics:
* Present means "use this block device" as backing storage
* Absent means "default to the one stored in the image"
* Except "" means "don't use backing storage at all"
The first two are perfectly normal: when the parameter is absent, it
defaults to an implied value, but the value's meaning is the same.
The third one overloads the parameter with a second meaning. The
overloading is *implicit*, i.e. it's not visible in the types. Works
here, because "" is not a value block device ID.
Pressing argument values the schema accepts, but are semantically
invalid, into service to mean "do something else entirely" is not
general, as suitable invalid values need not exist. I also find it
ugly.
To clean this up, we could add a separate flag argument to suppress
@backing, or add a distinct value to @backing. This commit implements
the latter: add JSON null to the values of @backing, deprecate "".
Because we're so close to the 2.10 freeze, implement it in the
stupidest way possible: have qmp_blockdev_add() rewrite null to ""
before anything else can see the null. Works, because BlockdevRef
occurs only within arguments of blockdev-add. The proper way to do it
would be rewriting "" to null, preferably in a cleaner way, but that
requires fixing up code to work with null. Add a TODO comment for
that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=2c6k
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Tue 18 Jul 2017 14:29:59 BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (21 commits)
qemu-img: Check for backing image if specified during create
blockdev: move BDRV_O_NO_BACKING option forward
block/vvfat: Fix compiler warning with gcc 7
vvfat: initialize memory after allocating it
vvfat: correctly parse non-ASCII short and long file names
vvfat: add a constant for bootsector name
vvfat: add constants for special values of name[0]
qemu-iotests: Test unplug of -device without drive
qemu-iotests: Test 'info block'
scsi-disk: bdrv_attach_dev() for empty CD-ROM
ide: bdrv_attach_dev() for empty CD-ROM
block: List anonymous device BBs in query-block
block/qapi: Use blk_all_next() for query-block
block: Make blk_all_next() public
block/qapi: Add qdev device name to query-block
block: Make blk_get_attached_dev_id() public
block/vpc.c: Handle write failures in get_image_offset()
block/vmdk: Report failures in vmdk_read_cid()
block: remove timer canceling in throttle_config()
block: add clock_type field to ThrottleGroup
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Or, rather, force the open of a backing image if one was specified
for creation. Using a similar -unsafe option as rebase, allow qemu-img
to ignore the backing file validation if possible.
It may not always be possible, as in the existing case when a filesize
for the new image was not specified.
This is accomplished by shifting around the conditionals in
bdrv_img_create, such that a backing file is always opened unless we
provide BDRV_O_NO_BACKING. qemu-img is adjusted to pass this new flag
when -u is provided to create.
Sorry for the heinous looking diffstat, but it's mostly whitespace.
Inspired by: https://bugzilla.redhat.com/show_bug.cgi?id=1213786
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This caused an assertion failure until recently because the BlockBackend
would be detached on unplug, but was in fact never attached in the first
place. Add a regression test.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This test makes sure that all block devices show up on 'info block',
with all of the expected information, in different configurations.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
With -blockdev/-device, users can indirectly create anonymous
BlockBackends, while the state of such backends is still of interest. As
a preparation for making such BBs visible in query-block, make sure that
they can be identified even without a name by adding the ID/QOM path of
their qdev device to BlockInfo.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Commit 8ecaeae8 changed the way the client requests an NBD export,
and in the process also changed the resulting error message when
the export is not present, breaking a couple of iotests. The error
message is now directly given by the server (a failed NBD_OPT_GO)
instead of implied by the client (after exhausting NBD_OPT_LIST),
but looking at the testsuite changes, it proves worthwhile to
reword the error message to be slightly less verbose (as this is
one particular error message likely to be hit by a user).
Note that the error message is now sensitive to which binary is
running the server as well as the client (since the expected
output is replaying a message received from the server - for that
matter, it depends on a server new enough to understand NBD_OPT_GO);
in general iotests are run on client and server from the same source
code base so the default setup will pass; but if it proves
problematic for people overriding QEMU_PROG, QEMU_IMG_PROG,
QEMU_IO_PROG, and QEMU_NBD_PROG to point across multiple builds for
cross-version integration testing, we may have to later tweak or
sanitize the output somehow.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170717142310.17048-1-eblake@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-17-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-16-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function creates a collection of self-describing refcount
structures (including a new refcount table) at the end of a qcow2 image
file. Optionally, these structures can also describe a number of
additional clusters beyond themselves; this will be important for
preallocated truncation, which will place the data clusters and L2
tables there.
For now, we can use this function to replace the part of
alloc_refcount_block() that grows the refcount table (from which it is
actually derived).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-10-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some tests produce format-dependent output. Either the difference is
filtered out and ignored, or the test case is format-specific so we
don't need to worry about per-format output differences.
There is a third case: the test script is the same for all image formats
and the format-dependent output is relevant. An ugly workaround is to
copy-paste the test into multiple per-format test cases. This
duplicates code and is not maintainable.
This patch allows test cases to add per-format golden output files so a
single test case can work correctly when format-dependent output must be
checked:
123.out.qcow2
123.out.raw
123.out.vmdk
...
This naming scheme is not composable with 123.out.nocache or 123.pc.out,
two other scenarios where output files are split. I don't think it
matters since few test cases need these features.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-9-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
POSIX says that backslashes in the arguments to 'echo', as well as
any use of 'echo -n' and 'echo -e', are non-portable; it recommends
people should favor 'printf' instead. This is definitely true where
we do not control which shell is running (such as in makefile snippets
or in documentation examples). But even for scripts where we
require bash (and therefore, where echo does what we want by default),
it is still possible to use 'shopt -s xpg_echo' to change bash's
behavior of echo. And setting a good example never hurts when we are
not sure if a snippet will be copied from a bash-only script to a
general shell script (although I don't change the use of non-portable
\e for ESC when we know the running shell is bash).
Replace 'echo -n "..."' with 'printf %s "..."', and 'echo -e "..."'
with 'printf %b "...\n"', with the optimization that the %s/%b
argument can be omitted if the string being printed is a strict
literal with no '%', '$', or '`' (we could technically also make
this optimization when there are $ or `` substitutions but where
we can prove their results will not be problematic, but proving
that such substitutions are safe makes the patch less trivial
compared to just being consistent).
In the qemu-iotests check script, fix unusual shell quoting
that would result in word-splitting if 'date' outputs a space.
In test 051, take an opportunity to shorten the line.
In test 068, get rid of a pointless second invocation of bash.
CC: qemu-trivial@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170703180950.9895-1-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170702150510.23276-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
A user may specify a relative path for accessing qemu, qemu-img, etc.
through environment variables ($QEMU_PROG and friends) or a symlink.
If a test decides to change its working directory, relative paths will
cease to work, however. Work around this by making all of the paths to
programs that should undergo testing absolute. Besides "realpath", we
also have to use "type -p" to support programs in $PATH.
As a side effect, this fixes specifying these programs as symlinks for
out-of-tree builds: Before, you would have to create two symlinks, one
in the build and one in the source tree (the first one for common.config
to find, the second one for the iotest to use). Now it is sufficient to
create one in the build tree because common.config will resolve it.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170702150510.23276-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
On some distros, whenever you close a block device file
descriptor there is a udev rule that resets the file
permissions. This can race with the test script when
we run qemu-io multiple times against the same block
device. Occasionally the second qemu-io invocation
will find udev has reset the permissions causing failure.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-6-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add tests for sha224, sha512, sha384 and ripemd160 hash
algorithms.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-5-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
By default the PBKDF algorithm used with LUKS is tuned
based on the number of iterations to produce 1 second
of running time. This makes running the I/O test with
the LUKS format orders of magnitude slower than with
qcow2/raw formats.
When creating LUKS images, set the iteration time to
a 10ms to reduce the time overhead for LUKS, since
security does not matter in I/O tests.
Previously a full 'check -luks' would take
$ time ./check -luks
Passed all 22 tests
real 23m9.988s
user 21m46.223s
sys 0m22.841s
Now it takes
$ time ./check -luks
Passed all 22 tests
real 4m39.235s
user 3m29.590s
sys 0m24.234s
Still slow compared to qcow2/raw, but much improved
none the less.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-4-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The tests 033, 140, 145 and 157 were all broken
when run with LUKS, since they did not correctly use
the required image opts args syntax to specify the
decryption secret. Further, the 120 test simply does
not make sense to run with luks, as the scenario
exercised is not relevant.
The test 181 was broken when run with LUKS because
it didn't take account of fact that $TEST_IMG was
already in image opts syntax. The launch_qemu
helper also didn't register the secret object
providing the LUKS password.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-3-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
While the qemu-img dd command does accept --image-opts
this is not sufficient to make it work with the LUKS
image yet. This is because bdrv_create() still always
requires the non-image-opts syntax.
Thus we must skip 159/170 with luks for now
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170626123510.20134-2-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-27-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 181 only works for formats which support live migration (naturally,
as it is a live migration test). Disable it for all formats which do
not.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170621131157.16584-1-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The 138 and 158 iotests exercise the legacy qcow2 aes encryption
code path and they work fine with qcow v1 too.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-16-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This extends the 087 iotest to cover LUKS encryption when doing
blockdev-add.
Two further tests are added to validate read/write of LUKS
encrypted images with a single file and with a backing file.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-15-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds support for using LUKS as an encryption format
with the qcow2 file, using the new encrypt.format parameter
to request "luks" format. e.g.
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encrypt.format=luks,encrypt.key-secret=sec0 \
test.qcow2 10G
The legacy "encryption=on" parameter still results in
creation of the old qcow2 AES format (and is equivalent
to the new 'encryption-format=aes'). e.g. the following are
equivalent:
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encryption=on,encrypt.key-secret=sec0 \
test.qcow2 10G
# qemu-img create --object secret,data=123456,id=sec0 \
-f qcow2 -o encryption-format=aes,encrypt.key-secret=sec0 \
test.qcow2 10G
With the LUKS format it is necessary to store the LUKS
partition header and key material in the QCow2 file. This
data can be many MB in size, so cannot go into the QCow2
header region directly. Thus the spec defines a FDE
(Full Disk Encryption) header extension that specifies
the offset of a set of clusters to hold the FDE headers,
as well as the length of that region. The LUKS header is
thus stored in these extra allocated clusters before the
main image payload.
Aside from all the cryptographic differences implied by
use of the LUKS format, there is one further key difference
between the use of legacy AES and LUKS encryption in qcow2.
For LUKS, the initialiazation vectors are generated using
the host physical sector as the input, rather than the
guest virtual sector. This guarantees unique initialization
vectors for all sectors when qcow2 internal snapshots are
used, thus giving stronger protection against watermarking
attacks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-14-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This converts the qcow2 driver to make use of the QCryptoBlock
APIs for encrypting image content, using the legacy QCow2 AES
scheme.
With this change it is now required to use the QCryptoSecret
object for providing passwords, instead of the current block
password APIs / interactive prompting.
$QEMU \
-object secret,id=sec0,file=/home/berrange/encrypted.pw \
-drive file=/home/berrange/encrypted.qcow2,encrypt.key-secret=sec0
The test 087 could be simplified since there is no longer a
difference in behaviour when using blockdev_add with encrypted
images for the running vs stopped CPU state.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-12-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Historically the qcow & qcow2 image formats supported a property
"encryption=on" to enable their built-in AES encryption. We'll
soon be supporting LUKS for qcow2, so need a more general purpose
way to enable encryption, with a choice of formats.
This introduces an "encrypt.format" option, which will later be
joined by a number of other "encrypt.XXX" options. The use of
a "encrypt." prefix instead of "encrypt-" is done to facilitate
mapping to a nested QAPI schema at later date.
e.g. the preferred syntax is now
qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-8-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 048 is designed to verify data preservation during an
image resize. The qcow (v1) format impl has never supported
resize so always fails.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-7-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 042 is designed to verify operation with zero sized images.
Such images are not supported with qcow (v1), so this test has
always failed.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-6-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Without a passthrough status of BDRV_BLOCK_RAW, anything wrapped by
blkdebug appears 100% allocated as data. Better is treating it the
same as the underlying file being wrapped.
Update iotest 177 for the new expected output.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We document that *file is valid if the return is not an error and
includes BDRV_BLOCK_OFFSET_VALID, but forgot to obey this contract
when a driver (such as blkdebug) lacks a callback. Messed up in
commit 67a0fd2 (v2.6), when we added the file parameter.
Enhance qemu-iotest 177 to cover this, using a sequence that would
print garbage or even SEGV, because it was dererefencing through
uninitialized memory. [The resulting test output shows that we
have less-than-ideal block status from the blkdebug driver, but
that's a separate fix coming up soon.]
Setting *file on all paths that return BDRV_BLOCK_OFFSET_VALID is
enough to fix the crash, but we can go one step further: always
setting *file, even on error, means that a broken caller that
blindly dereferences file without checking for error is now more
likely to get a reliable SEGV instead of randomly acting on garbage,
making it easier to diagnose such buggy callers. Adding an
assertion that file is set where expected doesn't hurt either.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most callback commands in qemu-io return 0 to keep the interpreter
loop running, or 1 to quit immediately. However, open_f() just
passed through the return value of openfile(), which has different
semantics of returning 0 if a file was opened, or 1 on any failure.
As a result of mixing the return semantics, we are forcing the
qemu-io interpreter to exit early on any failures, which is rather
annoying when some of the failures are obviously trying to give
the user a hint of how to proceed (if we didn't then kill qemu-io
out from under the user's feet):
$ qemu-io
qemu-io> open foo
qemu-io> open foo
file open already, try 'help close'
$ echo $?
0
In general, we WANT openfile() to report failures, since it is the
function used in the form 'qemu-io -c "$something" no_such_file'
for performing one or more -c options on a single file, and it is
not worth attempting $something if the file itself cannot be opened.
So the solution is to fix open_f() to always return 0 (when we are
in interactive mode, even failure to open should not end the
session), and save the return value of openfile() for command line
use in main().
Note, however, that we do have some qemu-iotests that do 'qemu-io
-c "open file" -c "$something"'; such tests will now proceed to
attempt $something whether or not the open succeeded, the same way
as if the two commands had been attempted in interactive mode. As
such, the expected output for those tests has to be modified. But it
also means that it is now possible to use -c close and have a single
qemu-io command line operate on more than one file even without
using interactive mode. Although the '-c open' action is a subtle
change in behavior, remember that qemu-io is for debugging purposes,
so as long as it serves the needs of qemu-iotests while still being
reasonable for interactive use, it should not be a problem that we
are changing tests to the new behavior.
This has been awkward since at least as far back as commit
e3aff4f, in 2009.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When we have a BDS with unallocated clusters, but asking the status
of its underlying bs->file or backing layer encounters an end-of-file
condition, we know that the rest of the unallocated area will read as
zeroes. However, pre-patch, this required two separate calls to
bdrv_get_block_status(), as the first call stops at the point where
the underlying file ends. Thanks to BDRV_BLOCK_EOF, we can now widen
the results of the primary status if the secondary status already
includes BDRV_BLOCK_ZERO.
In turn, this fixes a TODO mentioned in iotest 154, where we can now
see that all sectors in a partial cluster at the end of a file read
as zero when coupling the shorter backing file's status along with our
knowledge that the remaining sectors came from an unallocated cluster.
Also, note that the loop in bdrv_co_get_block_status_above() had an
inefficent exit: in cases where the active layer sets BDRV_BLOCK_ZERO
but does NOT set BDRV_BLOCK_ALLOCATED (namely, where we know we read
zeroes merely because our unallocated clusters lie beyond the backing
file's shorter length), we still ended up probing the backing layer
even though we already had a good answer.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170505021500.19315-3-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Perform the savevm/loadvm test with both iothread on and off. This
covers the recently found savevm/loadvm hang when iothread is enabled.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The legacy -hda option does not support -drive/-device parameters. They
will be required by the next patch that extends this test case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When qemu is exited, all running jobs should be cancelled successfully.
This adds a test for this for all types of block jobs that currently
exist in qemu.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
After _cleanup_qemu(), test cases should be able to start the next qemu
process and call _cleanup_qemu() for that one as well. For this to work
cleanly, we need to improve the cleanup so that the second invocation
doesn't try to kill the qemu instances from the first invocation a
second time (which would result in error messages).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
