macOS API for dealing with serial ports/ttys is identical to BSDs.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200426210956.17324-1-dottedmag@dottedmag.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use error_setg_win32() which adds a hint similar to strerror(errno)).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200228100726.8414-2-philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Trying to attach a HMP monitor to a chardev that is already in use
results in a crash because monitor_init_hmp() passes &error_abort to
qemu_chr_fe_init():
$ ./x86_64-softmmu/qemu-system-x86_64 --chardev stdio,id=foo --mon foo --mon foo
QEMU 4.2.50 monitor - type 'help' for more information
(qemu) Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:220:
qemu-system-x86_64: --mon foo: Device 'foo' is in use
Abgebrochen (Speicherabzug geschrieben)
Fix this by allowing monitor_init_hmp() to return an error and passing
any error in qemu_chr_fe_init() to its caller instead of aborting.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-19-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QLIST_REMOVE() assumes the element is in a list. It also leaves the
element's linked list pointers dangling.
Introduce a safe version of QLIST_REMOVE() and convert open-coded
instances of this pattern.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200214171712.541358-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeFbG8AAoJEL/70l94x66DCpMIAKBwxBL+VegqI+ySKgmtIBQX
LtU+ardEeZ37VfWfvuWzTFe+zQ0hsFpz/e0LHE7Ae+LVLMNWXixlmMrTIm+Xs762
hJzxBjhUhkdrMioVYTY16Kqap4Nqaxu70gDQ32Ve2sY6xYGxYLSaJooBOU5bXVgb
HPspHFVpeP6ZshBd1n2LXsgURE6v3AjTwqcsPCkL/AESFdkdOsoHeXjyKWJG1oPy
W7btzlUEqVsauZI8/PhhW/8hZUvUsJVHonYLTZTyy8aklU7aOILSyT2uPXFBVUVQ
irkQjLtD4dWlogBKO4i/QHMuwV+Asa57WNPmqv3EcIWPUWmTY84H0g2AxRgcc2M=
=48jx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Compat machines fix (Denis)
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
# gpg: Signature made Wed 08 Jan 2020 10:41:00 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (38 commits)
chardev: Use QEMUChrEvent enum in IOEventHandler typedef
chardev: use QEMUChrEvent instead of int
chardev/char: Explicit we ignore some QEMUChrEvent in IOEventHandler
monitor/hmp: Explicit we ignore a QEMUChrEvent in IOEventHandler
monitor/qmp: Explicit we ignore few QEMUChrEvent in IOEventHandler
virtio-console: Explicit we ignore some QEMUChrEvent in IOEventHandler
vhost-user-blk: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-net: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-crypto: Explicit we ignore some QEMUChrEvent in IOEventHandler
ccid-card-passthru: Explicit we ignore QEMUChrEvent in IOEventHandler
hw/usb/redirect: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/usb/dev-serial: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/char/terminal3270: Explicit ignored QEMUChrEvent in IOEventHandler
hw/ipmi: Explicit we ignore some QEMUChrEvent in IOEventHandler
hw/ipmi: Remove unnecessary declarations
target/i386: Add missed features to Cooperlake CPU model
target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES
target/i386: Fix handling of k_gs_base register in 32-bit mode in gdbstub
hw/rtc/mc146818: Add missing dependency on ISA Bus
hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Chardev events are listed in the QEMUChrEvent enum.
By using the enum in the IOEventHandler typedef we:
- make the IOEventHandler type more explicit (this handler
process out-of-band information, while the IOReadHandler
is in-band),
- help static code analyzers.
This patch was produced with the following spatch script:
@match@
expression backend, opaque, context, set_open;
identifier fd_can_read, fd_read, fd_event, be_change;
@@
qemu_chr_fe_set_handlers(backend, fd_can_read, fd_read, fd_event,
be_change, opaque, context, set_open);
@depends on match@
identifier opaque, event;
identifier match.fd_event;
@@
static
-void fd_event(void *opaque, int event)
+void fd_event(void *opaque, QEMUChrEvent event)
{
...
}
Then the typedef was modified manually in
include/chardev/char-fe.h.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-15-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This uses the QEMUChrEvent enum everywhere except in IOEventHandler.
The IOEventHandler change needs to happen at once for all front ends and
is done with Coccinelle in the next patch.
(Extracted from a patch by Philippe Mathieu-Daudé).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit all the events ignored by this frontend, to silent the
following GCC warning:
chardev/char.c: In function ‘qemu_chr_be_event’:
chardev/char.c:65:5: error: enumeration value ‘CHR_EVENT_BREAK’ not handled in switch [-Werror=switch]
65 | switch (event) {
| ^~~~~~
chardev/char.c:65:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch]
chardev/char.c:65:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch]
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-14-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Internally, qemu may create chardev without ID. Those will not be
looked up with qemu_chr_find(), which prevents using qdev_prop_set_chr().
Use id_generate(), to generate an internal name (prefixed with #), so
no conflict exist with user-named chardev.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: xiaoqiang zhao <zxq_yx_007@163.com>
There's a race condition in which the tcp_chr_read() ioc handler can
close a connection that is being written to from another thread.
Running iotest 136 in a loop triggers this problem and crashes QEMU.
(gdb) bt
#0 0x00005558b842902d in object_get_class (obj=0x0) at qom/object.c:860
#1 0x00005558b84f92db in qio_channel_writev_full (ioc=0x0, iov=0x7ffc355decf0, niov=1, fds=0x0, nfds=0, errp=0x0) at io/channel.c:76
#2 0x00005558b84e0e9e in io_channel_send_full (ioc=0x0, buf=0x5558baf5beb0, len=138, fds=0x0, nfds=0) at chardev/char-io.c:123
#3 0x00005558b84e4a69 in tcp_chr_write (chr=0x5558ba460380, buf=0x5558baf5beb0 "...", len=138) at chardev/char-socket.c:135
#4 0x00005558b84dca55 in qemu_chr_write_buffer (s=0x5558ba460380, buf=0x5558baf5beb0 "...", len=138, offset=0x7ffc355dedd0, write_all=false) at chardev/char.c:112
#5 0x00005558b84dcbc2 in qemu_chr_write (s=0x5558ba460380, buf=0x5558baf5beb0 "...", len=138, write_all=false) at chardev/char.c:147
#6 0x00005558b84dfb26 in qemu_chr_fe_write (be=0x5558ba476610, buf=0x5558baf5beb0 "...", len=138) at chardev/char-fe.c:42
#7 0x00005558b8088c86 in monitor_flush_locked (mon=0x5558ba476610) at monitor.c:406
#8 0x00005558b8088e8c in monitor_puts (mon=0x5558ba476610, str=0x5558ba921e49 "") at monitor.c:449
#9 0x00005558b8089178 in qmp_send_response (mon=0x5558ba476610, rsp=0x5558bb161600) at monitor.c:498
#10 0x00005558b808920c in monitor_qapi_event_emit (event=QAPI_EVENT_SHUTDOWN, qdict=0x5558bb161600) at monitor.c:526
#11 0x00005558b8089307 in monitor_qapi_event_queue_no_reenter (event=QAPI_EVENT_SHUTDOWN, qdict=0x5558bb161600) at monitor.c:551
#12 0x00005558b80896c0 in qapi_event_emit (event=QAPI_EVENT_SHUTDOWN, qdict=0x5558bb161600) at monitor.c:626
#13 0x00005558b855f23b in qapi_event_send_shutdown (guest=false, reason=SHUTDOWN_CAUSE_HOST_QMP_QUIT) at qapi/qapi-events-run-state.c:43
#14 0x00005558b81911ef in qemu_system_shutdown (cause=SHUTDOWN_CAUSE_HOST_QMP_QUIT) at vl.c:1837
#15 0x00005558b8191308 in main_loop_should_exit () at vl.c:1885
#16 0x00005558b819140d in main_loop () at vl.c:1924
#17 0x00005558b8198c84 in main (argc=18, argv=0x7ffc355df3f8, envp=0x7ffc355df490) at vl.c:4665
This patch adds a lock to protect tcp_chr_disconnect() and
socket_reconnect_timeout()
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <1565625509-404969-3-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Most callers know which monitor type they want to have. Instead of
calling monitor_init() with flags that can describe both types of
monitors, make monitor_init_{hmp,qmp}() public interfaces that take
specific bools instead of flags and call these functions directly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-15-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
char_pty_open() prints a "char device redirected to PTY_NAME (label
LABEL)" message to the current monitor or else to stderr. This is not
an error, so it shouldn't go to stderr. Print it to stdout instead.
Why is it even printed? No other ChardevClass::open() prints anything
on success. It's because you need to know PTY_NAME to actually use
this char device, e.g. like e.g. "socat STDIO,cfmakeraw FILE:PTY_NAME"
to use the monitor's readline interface. You can get PTY_NAME with
"info chardev" (a.k.a. query-chardev for QMP), but only if you already
have a monitor.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417190641.26814-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Command line help explicitly requested by the user should be printed
to stdout, not stderr. We do elsewhere. Adjust -chardev to match:
use qemu_printf() instead of error_printf(). Plain printf() would be
wrong because we need to print to the current monitor for "chardev-add
help".
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190417190641.26814-14-armbru@redhat.com>
Commit 767abe7 ("chardev: forbid 'wait' option with client sockets")
is a bit too strict. Current libvirt always set wait=false, and will
thus fail to add client chardev.
Make the code more permissive, allowing wait=false with client socket
chardevs. Deprecate usage of 'wait' with client sockets.
Fixes: 767abe7f49
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190415163337.2795-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently any client which can complete the TLS handshake is able to use
a chardev server. The server admin can turn on the 'verify-peer' option
for the x509 creds to require the client to provide a x509
certificate. This means the client will have to acquire a certificate
from the CA before they are permitted to use the chardev server. This is
still a fairly low bar.
This adds a 'tls-authz=OBJECT-ID' option to the socket chardev backend
which takes the ID of a previously added 'QAuthZ' object instance. This
will be used to validate the client's x509 distinguished name. Clients
failing the check will not be permitted to use the chardev server.
For example to setup authorization that only allows connection from a
client whose x509 certificate distinguished name contains 'CN=fred', you
would use:
$QEMU -object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\
endpoint=server,verify-peer=yes \
-object authz-simple,id=authz0,identity=CN=laptop.example.com,,\
O=Example Org,,L=London,,ST=London,,C=GB \
-chardev socket,host=127.0.0.1,port=9000,server,\
tls-creds=tls0,tls-authz=authz0 \
...other qemu args...
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
If the socket is connecting or connected, tcp_chr_update_read_handler will
be called but it should not set the NetListener's callbacks again.
Otherwise, tcp_chr_accept is invoked while the socket is in connected
state and you get an assertion failure.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Spice port registration is delayed until the server is started. But
ports created after are not being registered. If the server is already
started, do vmc_register_interface() to register it from
qemu_chr_open_spice_port().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-8-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Most chardev backend handle write() as discarded data if underlying
system is disconnected. For unknown historical reasons, the Spice
backend has "reliable" write: it will wait until the client end is
reconnected to do further successful write().
To decide whether it make sense to wait until the client is
reconnected (or queue the writes), let's review Spice chardev usage
and handling of a disconnected client:
* spice vdagent
The agents reopen the virtio port on disconnect. In qemu side,
virtio_serial_close() will also discard pending data.
* usb redirection
A disconnect creates a device disconnection.
* smartcard emulation
Data is discarded in passthru_apdu_from_guest().
(Spice doesn't explicitly open the smartcard char device until
upcoming 0.14.2, commit 69a5cfc74131ec0459f2eb5a231139f5a69a8037)
* spice webdavd
The daemon will restart the service, and reopen the virtio port.
* spice ports (serial console, qemu monitor..)
Depends on the associated device or usage.
- serial, may be throttled or discarded on write, depending on
device
- QMP/HMP monitor have some CLOSED event handling, but want to
flush the write, which will finish when a new client connects.
On disconnect/reconnect, the client starts with fresh sessions. If it
is a seamless migration, the client disconnects after the source
migrated. The handling of source disconnect in qemu is thus irrelevant
for the Spice session migration.
For all these use cases, it is better to discard writes when the
client is disconnected, and require the vm-side device/agent to behave
correctly on CHR_EVENT_CLOSED, to stop reading and writing from
the spice chardev.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Inform the front-end of disconnected state (spice client
disconnected).
This will wakeup the source handler immediately, so it can detect the
disconnection asap.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Victor Toso <victortoso@redhat.com>
Message-id: 20190221110703.5775-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The lock usage was described with its introduction in commit
9005b2a758. It was necessary because PTY
write() shares more state than GIOChannel with other
operations.
This made char-pty a bit different from other chardev, that only lock
around the write operation. This was apparent in commit
7b3621f47a, which introduced an idle
source to avoid the lock.
By removing the PTY chardev state sharing on write() with previous
patch, we can remove the lock and the idle source.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190206174328.9736-7-marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This doesn't help much compared to the 1 second poll PTY
timer. I can't think of a use case where this would help.
However, we can simplify the code around chr_write(): the write lock
is no longer needed for other char-pty callbacks (see following
patch).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190206174328.9736-6-marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of handling mux chardev in a special way in
qemu_chr_fe_set_handlers(), we may use the chr_update_read_handler
class callback instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190206174328.9736-2-marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The correct name is Wacom.
Fix the typo which is present since 378af96155.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190213123446.1768-1-philmd@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This will be needed by vhost-user-test, when each test switches to
its own GMainLoop and GMainContext. Otherwise, for a reconnecting
socket the initial connection will happen on the default GMainContext,
and no one will be listening on it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190202110834.24880-1-pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
valgrind on the test-char.c code reports that 'struct termios' contains
uninitialized memory.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-17-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When the 'reconnect' option is given for a client connection, the
qmp_chardev_open_socket_client method will run an asynchronous
connection attempt. The QIOChannel socket executes this is a single use
background thread, so the connection will succeed immediately (assuming
the server is listening). The chardev, however, won't get the result
from this background thread until the main loop starts running and
processes idle callbacks.
Thus when tcp_chr_wait_connected is run s->ioc will be NULL, but the
state will be TCP_CHARDEV_STATE_CONNECTING, and there may already
be an established connection that will be associated with the chardev
by the pending idle callback. tcp_chr_wait_connected doesn't check the
state, only s->ioc, so attempts to establish another connection
synchronously.
If the server allows multiple connections this is unhelpful but not a
fatal problem as the duplicate connection will get ignored by the
tcp_chr_new_client method when it sees the state is already connected.
If the server only supports a single connection, however, the
tcp_chr_wait_connected method will hang forever because the server will
not accept its synchronous connection attempt until the first connection
is closed.
To deal with this tcp_chr_wait_connected needs to synchronize with the
completion of the background connection task. To do this it needs to
create the QIOTask directly and use the qio_task_wait_thread method.
This will cancel the pending idle callback and directly dispatch the
task completion callback, allowing the connection to be associated
with the chardev. If the background connection failed, it can still
attempt a new synchronous connection.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-15-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
In the previous commit
commit 1dc8a6695c
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Tue Aug 16 12:33:32 2016 +0400
char: fix waiting for TLS and telnet connection
the tcp_chr_wait_connected() method was changed to check for a non-NULL
's->ioc' as a sign that there is already a connection present, as
opposed to checking the "connected" flag to supposedly fix handling of
TLS/telnet connections.
The original code would repeatedly call tcp_chr_wait_connected creating
many connections as 'connected' would never become true. The changed
code would still repeatedly call tcp_chr_wait_connected busy waiting
because s->ioc is set but the chardev will never see CHR_EVENT_OPENED.
IOW, the code is still broken with TLS/telnet, but in a different way.
Checking for a non-NULL 's->ioc' does not mean that a CHR_EVENT_OPENED
will be ready for a TLS/telnet connection. These protocols (and the
websocket protocol) all require the main loop to be running in order
to complete the protocol handshake before emitting CHR_EVENT_OPENED.
The tcp_chr_wait_connected() method is only used during early startup
before a main loop is running, so TLS/telnet/websock connections can
never complete initialization.
Making this work would require changing tcp_chr_wait_connected to run
a main loop. This is quite complex since we must not allow GSource's
that other parts of QEMU have registered to run yet. The current callers
of tcp_chr_wait_connected do not require use of the TLS/telnet/websocket
protocols, so the simplest option is to just forbid this combination
completely for now.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-14-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
If establishing a client connection fails, the tcp_chr_wait_connected
method should sleep for the reconnect timeout and then retry the
attempt. This ensures the callers don't immediately abort with an
error when the initial connection fails.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-13-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The socket connection state is indicated via the 'bool connected' field
in the SocketChardev struct. This variable is somewhat misleading
though, as it is only set to true once the connection has completed all
required handshakes (eg for TLS, telnet or websockets). IOW there is a
period of time in which the socket is connected, but the "connected"
flag is still false.
The socket chardev really has three states that it can be in,
disconnected, connecting and connected and those should be tracked
explicitly.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-12-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
In qmp_chardev_open_socket the code for connecting client chardevs is
split across two conditionals far apart with some server chardev code in
the middle. Split up the method so that code for client connection setup
is separate from code for server connection setup.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-11-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The tcp_chr_wait_connected method can deal with either server or client
chardevs, but some callers only care about one of these possibilities.
The tcp_chr_wait_connected method will also need some refactoring to
reliably deal with its primary goal of allowing a device frontend to
wait for an established connection, which will interfere with other
callers.
Split it into two methods, one responsible for server initiated
connections, the other responsible for client initiated connections.
In doing this split the tcp_char_connect_async() method is renamed
to become consistent with naming of the new methods.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-10-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The 'sioc' variable in qmp_chardev_open_socket was unused since
commit 3e7d4d20d3
Author: Peter Xu <peterx@redhat.com>
Date: Tue Mar 6 13:33:17 2018 +0800
chardev: use chardev's gcontext for async connect
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-9-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
If no valid char driver was identified the qemu_chr_parse_compat method
was silent, leaving callers no clue what failed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-8-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Now that all validation is separated off into a separate method,
we can directly populate the ChardevSocket struct from the
QemuOpts values, avoiding many local variables.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-7-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The 'wait'/'nowait' parameter is used to tell server sockets whether to
block until a client is accepted during initialization. Client chardevs
have always silently ignored this option. Various tests were mistakenly
passing this option for their client chardevs.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-6-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The 'reconnect' option is used to give the sleep time, in seconds,
before a client socket attempts to re-establish a connection to the
server. It does not make sense to set this for server sockets, as they
will always accept a new client connection immediately after the
previous one went away.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-5-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The TLS creds option is not valid with certain address types. The user
config was only checked for errors when parsing legacy QemuOpts, thus
the user could pass unsupported values via QMP.
Pull all code for validating options out into a new method
qmp_chardev_validate_socket, that is called from the main
qmp_chardev_open_socket method. This adds a missing check for rejecting
TLS creds with the vsock address type.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-4-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When chardev is multiplexed (mux=on) there are a lot of cases where
CHR_EVENT_OPENED/CHR_EVENT_CLOSED events pairing (expected from
frontend side) is broken. There are either generation of multiple
repeated or extra CHR_EVENT_OPENED events, or CHR_EVENT_CLOSED just
isn't generated at all.
This is mostly because 'qemu_chr_fe_set_handlers()' function makes its
own (and often wrong) implicit decision on updated frontend state and
invokes 'fd_event' callback with 'CHR_EVENT_OPENED'. And even worse,
it doesn't do symmetric action in opposite direction, as someone may
expect (i.e. it doesn't invoke previously set 'fd_event' with
'CHR_EVENT_CLOSED'). Muxed chardev uses trick by calling this function
again to replace callback handlers with its own ones, but it doesn't
account for such side effect.
Fix that using extended version of this function with added argument
for disabling side effect and keep original function for compatibility
with lots of frontends already using this interface and being
"tolerant" to its side effects.
One more source of event duplication is just line of code in
char-mux.c, which does far more than comment above says (obvious fix).
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <7dde6abbd21682857f8294644013173c0b9949b3.1541507990.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Looking at chardev/spice.c code, I realize compilation was broken for
a while with spice-server < 0.12.3. Let's bump required version
to 0.12.5, released May 19 2014, instead of adding more #ifdef.
(this patch combines changes from an early version and some of
Frediano "[PATCH 2/2] spice: Bump required spice-server version to
0.12.6")
According to repology, all the distros that are build target platforms
for QEMU include it:
RHEL-7: 0.14.0
Debian (Stretch): 0.12.8
Debian (Jessie): 0.12.5
FreeBSD (ports): 0.14.0
OpenSUSE Leap 15: 0.14.0
Ubuntu (Xenial): 0.12.6
Note that a previous version of this patch was bumping version to
0.12.6. Unfortunately, Debian Jessie (oldstable) is stuck with spice
server 0.12.5, and QEMU should keep building until after 2y of current
stable (Stretch), which will be around June 17th 2019. Qemu 4.1
should thus be free of bumping to spice-server 0.12.6 during 4.1
development cycle.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20181128155932.16171-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QEMU_CHAR_FEATURE_GCONTEXT declares the character device can switch
GMainContext.
Assert we don't switch context when the character device doesn't
provide this feature. Character device users must not violate this
restriction. In particular, user configurations that violate them
must be rejected.
Existing frontend that rely on context switching would now assert() if
the backend doesn't allow it (instead of silently producing undesired
events in the default context). Following patches improve the
situation by reporting an error earlier instead, on the frontend side.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181205203737.9011-4-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Following the example of qemu_opts_print_help(), indent all entries in
the list of character devices.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
New option "websocket" added to allow using WebSocket protocol for
chardev socket backend.
Example:
-chardev socket,websocket,server,id=...
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <20181018223501.21683-3-jusual@mail.ru>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Upcoming websocket support requires additional parameters in function
headers that are already overloaded. This patch replaces the bunch of
parameters with a single structure pointer.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <20181018223501.21683-2-jusual@mail.ru>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
A chardev socket created with the 'fd=' argument is not going to
handle reconnection properly by recycling the same fd (or not in a
supported way). Let's forbid this case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>