Handle variable "fd_orig" going out of scope leaks the handle.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Although not technically not required by POSIX, the writev system call will
typically write out its buffers individually. That is, if the first buffer
is written successfully, but the second buffer pointer is invalid, then
the first chuck will be written and its size is returned.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The argument to the mlockall system call is not necessarily the same on
all platforms and thus may require translation prior to passing to the
host.
For example, PowerPC 64 bit platforms define values for MCL_CURRENT
(0x2000) and MCL_FUTURE (0x4000) which are different from Intel platforms
(0x1 and 0x2, respectively)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The clock_nanosleep syscall is unusual in that it returns positive
numbers in error handling situations, versus returning -1 and setting
errno, or returning a negative errno value. On POWER, the kernel will
set the SO bit of CR0 to indicate failure in a syscall. QEMU has
generic handling to do this for syscalls with standard return values.
Add special case code for clock_nanosleep to handle CR0 properly.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Properly detect a fault when attempting to store into an invalid
struct timespec pointer.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The sched_getparam, sched_setparam and sched_setscheduler system
calls take a pointer argument to a sched_param structure. When
this pointer is null, errno should be set to EINVAL.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The msgsnd system call takes an argument that describes the message
size (msgsz) and is of type size_t. The system call should set
errno to EINVAL in the event that a negative message size is passed.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The mq_open system call takes an optional struct mq_attr pointer
argument in the fourth position. This pointer is used when O_CREAT
is specified in the flags (second) argument. It may be NULL, in
which case the queue is created with implementation defined attributes.
Change the code to properly handle the case when NULL is passed in the
arg4 position.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For those target ABIs that use the ipc system call (e.g. POWER),
the third argument is used in the shmat path as a pointer. It
therefore must be declared as an abi_long (versus int) so that
the address bits are not lost in truncation. In fact, all arguments
to do_ipc should be declared as abit_long.
In fact, it makes more sense for all of the arguments to be declaried
as abi_long (except call).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The semun union used in the semctl system call contains both an int (val) and
pointers. In cross-endian situations on 64 bit targets, the value passed to
semctl is an 8 byte (abi_long) value and thus does not have the 4-byte val
field in the correct location. In order to rectify this, the other half
of the union must be accessed. This is achieved in code by performing
a byte swap on the entire 8 byte union, followed by a 4-byte swap of the
first half.
Also, eliminate an extraneous (dead) line of code that sets target_su.val in
the IPC_SET/IPC_GET case.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When the ipc system call is used to wrap a semctl system call,
the ptr argument to ipc needs to be dereferenced prior to passing
it to the semctl handler. This is because the fourth argument to
semctl is a union and not a pointer to a union.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The 64 bit PowerPC platforms eliminate the _unused1 and _unused2
elements of the semid_ds structure from <sys/sem.h>. So eliminate
these from the target_semid_ds structure.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add support for the setns and unshare syscalls, trivially passed through to
the host. Based on patches by Paul Burton, added configure check.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add support for the ioprio_get & ioprio_set syscalls, allowing their
use by target programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Adds support for the timerfd_create, timerfd_gettime & timerfd_settime
syscalls, allowing use of timerfds by target programs.
v2: By Riku - added configure check for timerfd and ifdefs
for benefit of old distributions like RHEL5.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The current code always returns the length of the path when it should
be returning the number of bytes it wrote to the output string.
Further, readlink is not supposed to append a NUL byte, but the current
snprintf logic will always do just that.
Even further, if you pass in a length of 0, you're suppoesd to get back
an error (EINVAL), but the current logic just returns 0.
Further still, if there was an error reading the symlink, we should not
go ahead and try to read the target buffer as it is garbage.
Simple test for the first two issues:
$ cat test.c
int main() {
char buf[50];
size_t len;
for (len = 0; len < 10; ++len) {
memset(buf, '!', sizeof(buf));
ssize_t ret = readlink("/proc/self/exe", buf, len);
buf[20] = '\0';
printf("readlink(/proc/self/exe, {%s}, %zu) = %zi\n", buf, len, ret);
}
return 0;
}
Now compare the output of the native:
$ gcc test.c -o /tmp/x
$ /tmp/x
$ strace /tmp/x
With what qemu does:
$ armv7a-cros-linux-gnueabi-gcc test.c -o /tmp/x -static
$ qemu-arm /tmp/x
$ qemu-arm -strace /tmp/x
Signed-off-by: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
There were a number of bugs in the conversion of the sigevent
argument to timer_create from target to host format:
* signal number not converted from target to host
* thread ID not copied across
* sigev_value not copied across
* we never unlocked the struct when we were done
Between them, these problems meant that SIGEV_THREAD_ID
timers (and the glibc-implemented SIGEV_THREAD timers which
depend on them) didn't work.
Fix these problems and clean up the code a little by pulling
the struct conversion out into its own function, in line with
how we convert various other structs. This allows the test
program in bug LP:1042388 to run.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
While Mikhail fixed /proc/self/maps, it was noticed openat calls are
not redirected currently. Some archs don't have open at all, so
openat needs to be redirected.
Fix this by consolidating open/openat code to do_openat - open
is implemented using openat(AT_FDCWD, ... ), which according
to open(2) man page is identical.
Since all targets now have openat, remove the ifdef around sys_openat
and openat: case in do_syscall.
Cc: Mikhail Ilin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Build /proc/self/maps doing a match against guest memory translation table.
Output only that map records which are valid for guest memory layout.
Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
target_to_host_sockaddr() may increase the lenth with 1 byte
for AF_UNIX sockets so allocate 1 extra byte.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add a definition of the KDSIGACCEPT ioctl & allow its use by target
programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The tv argument to the settimeofday syscall is allowed to be NULL, if
the program only wishes to provide the timezone. QEMU previously
returned -EFAULT when tv was NULL. Instead, execute the syscall &
provide NULL to the kernel as the target program expected.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The settimeofday syscall accepts a tz argument indicating the desired
timezone to the kernel. QEMU previously ignored any argument provided
by the target program & always passed NULL to the kernel. Instead,
translate the argument & pass along the data userland provided.
Although this argument is described by the settimeofday man page as
obsolete, it is used by systemd as of version 213.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Calls to the mount syscall can legitimately provide NULL as the value
for the source of filesystemtype arguments, which QEMU would previously
reject & return -EFAULT to the target program. An example of this is
remounting an already mounted filesystem with different properties.
Instead of rejecting such syscalls with -EFAULT, pass NULL along to the
kernel as the target program expects.
Additionally this patch fixes a potential memory leak when DEBUG_REMAP
is enabled and lock_user_string fails on the target or filesystemtype
arguments but a prior argument was non-NULL and already locked.
Since the patch already touched most lines of the TARGET_NR_mount case,
it fixes the indentation & coding style for good measure.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Translate the SO_PASSSEC option to setsockopt to the host value &
perform the syscall as expected, allowing use of the option by target
programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Translate the SO_SNDBUFFORCE & SO_RCVBUFFORCE options to setsockopt to
the host values & perform the syscall as expected, allowing use of those
options by target programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Translate the SO_ACCEPTCONN option to the host value & execute the
syscall as expected.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
QEMU previously passed the result of the host syscall directly to the
target program. This is a problem if the host & target have different
representations of socket types, as is the case when running a MIPS
target program on an x86 host. Introduce a host_to_target_sock_type
helper function mirroring the existing target_to_host_sock_type, and
call it to translate the value provided by getsockopt when called for
the SO_TYPE option.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
mmap_flags_tbl contains a list of mmap flags, and how to map them to
the target. This patch adds MAP_NORESERVE, which was missing to the
list.
Signed-off-by: Christophe Lyon <christophe.lyon@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
From MIPS documentation (Volume III):
UserLocal Register (CP0 Register 4, Select 2)
Compliance Level: Recommended.
The UserLocal register is a read-write register that is not interpreted by
the hardware and conditionally readable via the RDHWR instruction.
This register only exists if the Config3-ULRI register field is set.
Privileged software may write this register with arbitrary information and
make it accessible to unprivileged software via register 29 (ULR) of the
RDHWR instruction. To do so, bit 29 of the HWREna register must be set to a
1 to enable unprivileged access to the register.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This fixes "Cannot open audit interface - aborting." when the
EAFNOSUPPORT errno differs between the target and host
architectures (e.g. mips target and x86_64 host).
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If the guest's "long" type is smaller than the host's, then
our sched_getaffinity wrapper needs to round the buffer size
up to a multiple of the host sizeof(long). This means that when
we copy the data back from the host buffer to the guest's
buffer there might be more than we can fit. Rather than
overflowing the guest's buffer, handle this case by returning
EINVAL or ignoring the unused extra space, as appropriate.
Note that only guests using the syscall interface directly might
run into this bug -- the glibc wrappers around it will always
use a buffer whose size is a multiple of 8 regardless of guest
architecture.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Implementations of system calls getrusage and wait4 have not previously
handled correctly cases when incorrect address of struct rusage is
passed.
This change makes sure return values are correctly set for these cases.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the public sigset_t instead of the glibc specific internal
__sigset_t in _syscall.
Calculate the sigevent pad size is calculated in similar way as kernel
does it instead of using glibc internal field _pad.
This is needed for building with musl libc.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Recently merged kernel ports (such as OpenRISC and Meta) have an llseek
system call instead of _llseek. This is handled for the host
architecture by defining __NR__llseek as __NR_llseek, but not for the
target architecture.
Handle it in the same way for these architectures, defining
TARGET_NR__llseek as TARGET_NR_llseek.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Jia Liu <proljc@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
QEMU already supports /proc/self/{maps,stat,auxv} so addition of
/proc/self/exe is rather trivial.
Fixes https://bugs.launchpad.net/qemu/+bug/1299190
Signed-off-by: Maxim Ostapenko <m.ostapenko@partner.samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Flags NONBLOCK and CLOEXEC can have different values on the host and the
guest, so set correct host values before calling accept4().
This fixes several issues with accept4 system call and user-mode of QEMU.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Implement the capget and capset syscalls. This is useful because
simple programs like 'ls' try to use it in AArch64, and otherwise
we emit a lot of noise about it being unimplemented.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Create a wrapper for signal mask changes initiated by the guest;
(this includes syscalls and also the sigreturns from signal.c)
this will give us a place to put code which prevents the guest
from changing the handling of signals used by QEMU itself
internally.
The wrapper is called from all the guest-initiated sigprocmask, but
is not called from internal qemu sigprocmask calls.
Signed-off-by: Alex Barcelo <abarcelo@ac.upc.edu>
[PMM: Added calls to wrapper for sigprocmask uses in signal.c
when setting the signal mask on entry and exit from signal
handlers, since these also are guest-provided signal masks.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
F_GETOWN is replaced by F_GETOWN_EX inside the glibc fcntl wrapper
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
QEMU's implementation of the m68k atomic_barrier syscall, like the kernel's,
is just a no-op. However we still need to return a result code from it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
